Military Engineer Services-MES has published Tender For Special Repair To Building No T-09In The Aor Of Age B/R-1 Under Ge Khumbathang. Submission Date for this Tender is 07-05-2024. Building Work Tenders in Khumbathang Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| FileName | File Description | File Size |
| 5dfbd01b-7611-47c8-9662-1617dd481142.html | Tender Notice | 0 KB |
| BOQ_728011.xls | Tender Document | 0 KB |
| Tender43.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Dismantling, wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, includingcover fillets. complete all as specified and directed by Eng-in-Charge |
| 2 | Dismantling timber in fillets, rails, posts, rafters, purlins etc under 40 Sq cm in section in any position unframed work complete all as specified and directed by Eng-in-Charge |
| 3 | Demolition of brick work or stone/ boulder/PCC block masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed by Eng-in-Charge |
| 4 | Dismantling of Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Eng-in-Charge |
| 5 | Dismantlingwrought iron or mild steel work of any descriptioncomplete all as specified and directed by Eng-in-Charge |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) and rubbish off the premises complete all as specified and directed by Eng-in-Charge |
| 7 | M&L for Joist, channel, angle, or tee sections,Fe-410-W (GdeE-250)quality fixed independently, with or without connecting plates,in roof,wall etc complete all as specified and directed by Eng-in-Charge |
| 8 | M&L for cement concrete in foundation,filling and mass concrete type D-2, type 1:4:8 (using 40mm graded crushed stone aggregate) complete all as specified and directed by Eng-in-Charge |
| 9 | M&L second class soft wood, plain fillets, square or rectangular in section of area exc 13 and n exc 25 Sqcm, clean sawn, secured with nailsor brads complete all as specified and directed by Eng-in-Charge |
| 10 | M&L second class soft wood, plain fillets, square or rectangular in section of area exc 6 and n exc 13 Sqcm, clean sawn, secured with nailsor bradscomplete all as specified and directed by Eng-in-Charge |
| 11 | M&L second class soft wood, plain fillets, square or rectangular in section of area n exc 3 Sqcm, clean sawn, secured with nailsor brads complete all as specified and directed by Eng-in-Charge |
| 12 | M&L 9mm thick, prelaminated particle board, interior grade, prelaminatedone side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in ceiling complete all as specified and directed by Eng-in-Charge |
| 13 | M&L 12 mm thick, prelaminated particle board, interior grade, prelaminatedone side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work as in walls complete all as specified and directed by Eng-in-Charge |
| 14 | Demolition of cement concrete in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Eng-in-Charge |
| 15 | M & L 25 mm thick cement concrete, type B-0 1:2:4(12.5mm graded crushed stone aggregate) as in sub base to floor complete all as specified and directed by Eng-in-Charge |
| 16 | M&L for machine cut kota stone slab flooring 20-25 mm thick over & including 15mm thick screed bed in cement mortar 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and directed by Eng-in-Charge |
| 17 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) n exc 1.50Sqm each complete all as specified and directed by Eng-in-Charge |
| 18 | Taking down chowkats or frame with shutters ( without taking off shutter from frame ) 1.50 Sqm and n exc 4.0 Sqm each complete all as specified and directed by Eng-in-Charge |
| 19 | Supply and fixing of pressed steel windows (hollow section) with side hung shutters including projecting type hinges with steel handle and steel peg stay and 02 Nos tower bolt in each leaf complete with glazing bars dovetailed or welded complete all as specified and directed by Eng-in-Charge |
| 20 | Supply and fixing of 4 mm thick, sheet glass ordinary quality and glazing with oil putty in square n exc 0.50 Sqm in each pane complete all as specified and directed by Eng-in-Charge |
| 21 | M & L for Plain,Solid,Straight Chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints supplied and fixed 2nd class hard wood complete all as specified and directed by Eng-in-Charge |
| 22 | Supply and fixing of plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm vaneered particle board with commercial vaneering on both faces.The size of rail and stile as per IS: 1003 (Part I) kiln seasoned and chemically pressure treated 35 mm thickness of shutter (2nd class HW rail and style) complete all as specified and directed by Eng-in-Charge |
| 23 | Supply and fixing of second class hardwood Glazed and skeleton shutters 30mm thick divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars,any numbersprepared to receive glass,gauze, etc.fitted with cut and mitred beads for securing glass,etc complete all as specified and directed by Eng-in-Charge |
| 24 | Supply and fixing of Mild steel barrel tower bolts,stove enamelled black with bright bolt and fixed (150mm length of bolt) complete all as specified and directed by Eng-in-Charge |
| 25 | Supply and fixing of Mild steel sliding door bolts,plate type,stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate (250mm length of bolt) complete all as specified and directed by Eng-in-Charge |
| 26 | Supply and fixing of butt hinges heavy weight cold rolled mild steel and fixed (100mm) complete all as specified and directed by Eng-in-Charge |
| 27 | Supply and fixing of butt hinges heavy weight cold rolled mild steel and fixed (75mm) complete all as specified and directed by Eng-in-Charge |
| 28 | Supply and fixing of mild steel handles, (150mm) complete all as specified and directed by Eng-in-Charge |
| 29 | Supply and fixingfor Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Eng-in-Charge. |
| 30 | Supply and fixingfor Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Eng-in-Charge |
| 31 | Pre-cast cement concrete block masonry type C-1,1:3:6 (using 16mm graded crushed stone aggregate) with solid blocksexc. 10 cm in width and setting in cement mortar 1:6 , complete all as specified and directed by Eng-in-Charge |
| 32 | Rendering 15 mm thickon fair faces (both face) ofbrick work orconcrete surfaces in cement mortar 1:4 with WPC is to be finished even and smooth (with out using extra cement) complete all as specified and directed by Eng-in-Charge. Note :- WPC shall be measured and paid separately |
| 33 | Supply only integralwater proofing compound complete all as specified and directed by Eng-in-Charge |
| 34 | Preparation ofnew surfaces of walls including cornices and applying two coats of cement based paint over a coat of primer on walls complete all asspecified and directed by the Engr-in-Charge. |
| 35 | Preparation ofnew surfaces of walls including cornices and applying two coats of oil bound distemper over a coat of primer, white or tinted over 1.5mm thick wall care puttyall asspecified & directed by the Engr-in-Charge. |
| 36 | Preparation new or previously untreated wood surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Eng-in-Charge |
| 37 | Preparation old painted steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paintall asspecified & directed by the Engr-in-Charge. |
| 38 | Preparation of new or previously untreatediron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of red oxide primerall asspecified and directed by the Engr-in-Charge. |
| 39 | Supply and fixing inrepair 25 mm dia stainless steel curtain rods including end cap/ brackets,stops, rollers latest design etc and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | M&L 100 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded crushed stone aggregate) as in floor complete all as specified and directed by Eng-in-Charge |
| 41 | M&L for chequered cement concrete tiles 20cm x 20cm x 20-25mm thick, including 15mm thick screed bed in cement mortar 1:6 set, jointed and pointed in neat cement slurry and filling of joints with grey pigment cement and pigmants in floors complete all as specified and directed by Eng-in-Charge |
| 42 | Proving and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line,level and curvature,jointed with cement mortar 1:3 (1 cement 3 course sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not more than 5mm) including making drainage opening wherever required including taking off/down of kerb stone of any type complete all as specified and directed by Eng-in-Charge |
| 43 | Material and labour non skid colour ceramic tiles of 7 to 8 mm thick (square/rectangular) area of each the exceeding0.11 sqm but not exceeding0.18 sqm of approved 1st qualityin floors including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed by Eng-in-Charge |
| 44 | M & L for GlazedCeramic tiles coloured, of size350 mm x 250 mmX7 mm /450mm X 300 mm X 7mm thick approved 1st quality asinvertical surfaces such as skirting/ dados and risers to steps over&including 10mm thick rendering in cement mortar 1 : 4 for laying of skirting/dado set and jointed in neat cement slurry and pointedwithwhite/ coloured cement to match the colour of tiles complete all as specified and directed by Eng-in-Charge |
| 45 | Taking up or down steel tubing and connections 15mm bore of pipe, including cleaning for refixing or removal to storecomplete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Taking up or down steel tubing and connections 20mm bore of pipe, including cleaning for refixing or removal to storecomplete all as specified and as directed by the Engineer-in-Charge. |
| 47 | Supply and fixing of steel water tubing 15 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors complete all as specified and directed by Eng-in-Charge |
| 48 | All as per item No 47.00 above but 20mm dia complete all as specified and directed by Eng-in-Charge |
| 49 | Supply and fixing of solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge |
| 50 | Supply and fixing of factory made PVC moulded door shutter with particle board core, 28 to 30 mm thick(stIles) with 2,4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on the front face and 2 mm prelam colour PVC sheet on back face supplying and fixing in frame at site as per specification complete all as directed and specified by Engr-In-charge |
| 51 | Supply and fixing in repair vitreous china ware wash hand basin 550mmx 400 mm size flat back or angle including new bracket and making good all connections complete all as directed and specified by Engr-In-charge |
| 52 | Supply and fixing of 32 mm Dia PVC waste pipe for sinks or wash basines etc, in repairs complete all as directed and specified by Engr-In-charge |
| 53 | Supply and fixing of 32 mm dia bore waste fittings brass chromium plated fixed to wash hand basin/urinals with long screwed shanks and fly nuts flange and bedded in run lead cement and other end fixedin repairscomplete all as directed and specified by Engr-In-charge. |
| 54 | Supply and fixing in repair 15 mm bore piller cocks fancy type,cast copper alloy, with capstan heads,chromium plated,screwed down, fancy type high pressure, with or without lettred "HOT or COLD" with long screwed sunk and fly nuts. complete all as specified and directed by Eng-in-Charge |
| 55 | Supply and fixing in repair Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed complete all as specified and directed by Eng-in-Charge |
| 56 | Supply and fixing of 15mm bore angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair complete all as specified and directed by Eng-in-Charge |
| 57 | Supply and fixing of PVC connection15 mm bore LDPE pipe 45 cm long withbrass nuts and washers on both ends all asin repairs complete all as specified and directed by Eng-in-Charge |
| 58 | Supply and fixing inrepair 600mmx450mm bevelled edge mirror of selected quality glass, and fixed to wall withchromium plated screw studscomplete all as specified and directed by Eng-in-Charge |
| 59 | Supply and fixing in repair Vitreous China squatting pan of pattern “Orissa pattern”, size 580x440 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern n including connection to trap and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor (excluding flushing cistern and flush pipe) complete all as specified and directed by Eng-in-Charge |
| 60 | Supply and fixing inrepair 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceablecistern complete as in repairs complete all as specified and directed by Eng-in-Charge |
| 61 | Supply and fixing inrepair Towel Rail 600mm long 20mm dia, D type cromium plated, fixed with and including Chromium plated brass screws andwooden/plastic cleats and fixed in repairs complete all as specified and directed by Eng-in-Charge |
| 62 | Supply and fixing of sheet glass shelf assembly consisting of 5.5 mm thick sheet galss shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed by Eng-in-Charge. |
| 63 | Supply and fixing of 75 mm dia PVC (SWR) floor trap plain with grating doom with or without hole as directed including jointing to waste pipe fixed in solvent cement or cement concrete 1:2:4 type B-1 complete all as specified and directed by Eng-in-Charge |
| 64 | Supply and fixing in repair Bib taps, cast copper alloy, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm dia and fixed complete all as specified and directed by Eng-in-Charge |
| 65 | Demolition/Dismantling of drain pipes any type at any position complete all as specified and directed by Eng-in-Charge |
| 66 | Supply and fixing of 75mm bore PVC(SWR) Pipes single socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge |
| 67 | Supply and fixing of 110mm bore PVC(SWR) Pipes sinle socketed in any length with rubber ring joints laid in trenches or in floor complete all as specified and directed by Eng-in-Charge |
| 68 | Supply and fixing of 75mm bore PVC (SWR) bendcomplete all as specified and directed by Eng-in-Charge |
| 69 | Supply and fixing of 10mm bore PVC (SWR) bend complete all as specified and directed by Eng-in-Charge |
| 70 | Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socketor power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface etc. complete all as specified and directed by Eng-in-Charge |
| 71 | Material and labourfor point wiring with 1.5 sqmm cable FRLSPVC insulated, unsheathed copper multistranded conductor, 1100 V grade of size 1.5sqmm including necessary termination board 1.5 Sqmm PVC insulated unsheathed FRLScopper conductor as earthingand connected to common earthing with PVCheavy duty casing caping/PVC conduit ISI marked as rquired at site along with all accessories and making good the disturbed surfaces of wall/ ceiling etcfor the following item no 71.01 and 71.02 complete all as specified and directed by Eng-in-Charge : - |
| 72 | One light point/ one fan point/ Bell Point controlled by one switch |
| 73 | One 3 pin socket outlet, 5 Amp independent |
| 74 | Supply and fixing in repair switch piano flush type single pole one way6 Amps complete all as specified and directed by Eng-in-Charge. |
| 75 | Supply and fixing in repair socket 6 amp complete all as specified and directed by Eng-in-Charge |
| 76 | Supply and fixing in repairCeiling rose3 plates flush type 6 Amps, 250 volts ACISI marked complete all as specified and directed by Eng-in-Charge |
| 77 | All as per item No 71.00 above butfor point wiring for power point with 2.5 Sqmm FRLS PVC insulated unsheathed copper cable 1100 Volt grade drawn through and including PVC casing caping heavy dutyISI marked /heavy duty conduitISI marked as required at site alongwith accessories with 2.5 Sq mmFRLS PVC insulated unsheathed copper conductor cable as earthing and connected to common earth complete all as specified and directed by Eng-in-Charge |
| 78 | Supply and fixing in repair switch socket combination switch socket outlet 3 pin, 16 amps flush type complete all as specified and directed by Eng-in-Charge |
| 79 | Supply and fixing in repair wall mounted LED light fitting 1x20 watts AC decorative box type with driver holder including LED tube light , energy ef?cient type 4 feet long including neccessary conection prewired and making connection with 3 core copper flexible cable of appropriate size from ceilling rose complete all as specified and directed by Eng-in-Charge |
| 80 | Supply and fixing in repair sheet metal enclosure SPN DB 02 way, single phase 240 volts double door with 200 amp rated bus bar complete all as specified and directed by Eng-in-Charge |
| 81 | Supply and fixing in repair sheet metal enclosure SPN DB 08 way, single phase 240 volts double door with 200 amp rated bus barcomplete all as specified and directed by Eng-in-Charge |
| 82 | Supply and fixing in repairfor Circuit breaker single pole, 6 to 32 Amp 240 volt C curve 10 KA, IP 20complete all as specified and directed incl taking down old one complete all as specified and directed by Eng-in-Charge |
| 83 | M&L in repairfor Circuit breaker single pole & neutral240 volt C curve 10 KA 32/40 Amps capacity IP 20 including taking down old one complete all as specified and directed by Eng-in-Charge. |
| 84 | Supply and fixing of LED security light fitting 33/45 watts 230 volts AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Eng-in-Charge |
| 85 | Supply and fixing in repair of exhaust fan , steel body AC single phase 230 volt of size 250/300 mm sweep mettalic body with blades and frame and louvers complete all as specified and directed by Eng-in-Charge |
| 86 | Supply and fixing in repairtwo single core 6 sq mm for sub Main wiring with copper conductor multistranded PVC insulated and unsheathed 1100 Volts grade in and including PVC casing capping with fixing accessories including one run of 6 Sq mm copper conductor complete all as specified and directed by Eng-in-Charge.(Note :- Two runs of 06 Sq mm cable, one run of 6 Sq mm earth cable and one run of PVC casing Capping shall be measured as one running meter.) |
| 87 | Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 sqmm 2 core complete all as specified and directed by Eng-in-Charge. |
| 88 | Material and labour earthing complete with galvanized steel earth plate 60 cm x 60cm x 6.0mm thick buried directly in ground vertically to a depth not less than2.25 mtr below ground level with top edge of the earth plate at a depth not less less than 1.5 mtr filled aroundwith 15 cm thick alternate layers of charcoal dust and salt and connected to earth leadwire 4mm dia (8 SWG) by means of bolt, nut and check nutsand washers of galvanized iron or steel and thimble and other ends of the earth wire connected to main switch board and protected by galvanized iron pipe light grade 15 mm bore and watering pipe 20mm dia light grade with funnel and wiremesh, PCC 1:3:6 type C-1 in chambers RCC 1:2:4 type B-1 in pit cover reinforced with 8 mm dia deformed bars 15 cm center to center both wayscomplete all as shown in electric plate No 3 of MES SSR Part I complete all as specified and directed by Eng-in-Charge. |
| 89 | Deduct Credit for Demolished/Dismantled material Rs (-) 43,884.00 (Minus) as listed in Schedule "A" Part-II (Credit Schedule) Note :Tenderers will not quote against this item being a tentative amount, to be considered to arrive at the "Contract Sum". |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
