Bharat Sanchar Nigam Limited-BSNL has published Tender For Special Repairs And Maintenance Works To Administrative Building, Bsnl Bhavan Campus, Sagara Road At Shivamogga.. Submission Date for this Tender is 26-04-2024. Building Work Tenders in sagar Karnataka. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
2 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). |
3 | Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows all complete with : |
4 | 4.0 mm thick glass panes. |
5 | Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). |
6 | Dark shade pigment using ordinary cement |
7 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, |
8 | (i)Single socketed pipes. |
9 | 75 mm diameter |
10 | 110 mm diameter |
11 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion. |
12 | Coupler |
13 | 75mm |
14 | 110mm |
15 | Single tee with door |
16 | 75x75x75 mm |
17 | 110x110x110 mm |
18 | Bend 87.5° |
19 | 75 mm bend |
20 | 110 mm bend |
21 | Neat cement punning |
22 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
23 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
24 | Water thinnable cement primer |
25 | Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved brand and manufacture to give an even shade : |
26 | Old work (one or more coats) |
27 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
28 | One or more coats on old work. |
29 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
30 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface. |
31 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
32 | With cement mortar 1:4 (1cement: 4 coarse sand). |
33 | Cleaning and de-silting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge. |
34 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- |
35 | (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. |
36 | (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. |
37 | (iii) Chlorination of RCC internal surface by liquid chlorine. |
38 | (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. |
39 | (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
40 | Removing sappling on building of exterior walls, pipe joints up to 15 mitre height including dismantling plaster uprooting applying HCL acid and plugging the holes with cement mortar 1:3 ( 1 cement : 3 coarse sand) necessary scaffoldings/ jhoola etc. complete as direction of the Engineer in charge. |
41 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. |
42 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
43 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
44 | 10 litre capacity - White |
45 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
46 | Flat back wash basin of size 550x400 mm. |
47 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
48 | Semi rigid pipe |
49 | 32 mm dia |
50 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
51 | Waste coupling 31 mm dia of 79 mm length and 62 mm breadth weighing not less than 45 gms. |
52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
53 | 20 mm nominal outer dia. Pipes. |
54 | 25 mm nominal outer dia .Pipes. |
55 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
56 | 25 mm nominal outer dia. Pipes. |
57 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
58 | 40 mm nominal bore |
59 | 50 mm nominal bore |
60 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : |
61 | 20 mm diameter pipe. |
62 | 25 mm diameter pipe |
63 | 40 mm diameter pipe |
64 | 50 mm diameter pipe |
65 | Providing and fixing PTMT bib cock of approved quality and colour |
66 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
67 | Providing and fixing PTMT pillar cock of approved quality and colour . |
68 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
69 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. |
70 | 15 mm nominal bore with 45 cm length. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail