}

Tender For Sdp- Sabarimala- Reconstruction Of Navagraha Temple Attached To Malikappuram Devi Temple At Sannidhanam, sabarimala-Kerala

Travancore Devaswom Board-TDB has published Tender For Sdp- Sabarimala- Reconstruction Of Navagraha Temple Attached To Malikappuram Devi Temple At Sannidhanam. Submission Date for this Tender is 26-04-2024. Temple Tenders in sabarimala Kerala. Bidders can get complete Tender details and download the document.




Tender Notice

43181895
Tender For Sdp- Sabarimala- Reconstruction Of Navagraha Temple Attached To Malikappuram Devi Temple At Sannidhanam
Open Tender
Indian
Kerala
sabarimala
26-04-2024

Tender Details

Sdp- Sabarimala- Reconstruction Of Navagraha Temple Attached To Malikappuram Devi Temple At Sannidhanam

Key Value

Document Fees
INR 2950 /-
EMD
INR 41200.0 /-
Tender Value
INR 16.46 Lakhs /-

BOQ Items

Name of Work: SDP Sabarimala - Reconstruction of Navagraha temple attached to malikappuram Devi temple at Sannidhanam-reg
Sl. No. Item Description
1AppendixA-Demolishing Malikappuram Vazhipadu counterEngaging man coolies for shifting the furniture in the Vazhipad counter
2Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below
3Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: G.S. Sheet
4Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
5Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar
6Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-chargeIn cement mortar
7Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
8Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - chargeNominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
9Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
10Appendix B- Reconstruction of Navagraha Temple at Malikapuram Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar
11Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. All kinds of soil
12Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
13Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)
14Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete
15Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more
16Providing ashlar" Kabothabandhathara" of height55.73 cm ( 18 angulam) and perimeter is 13 Kole 16 angulam with all ornamentation worksas per sasthric principles . All works completed as per the direction of Engineer in charge
17Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (1 Cement : 3 coarse sand (zone-III): 6 graded stone aggregate 40 mm nominal size)
18Providing ashlar "Manchakathara"for Navagraha Mandapa elevated peeda of height 43.34cm and perimeter 5 kole 16 Angulam with all ornamentation worksas per sasthric principles. All works completed as per the direction of Engineer in charge
19Layingsix face dressd ahlar stone flooringof 5cm thickoverCM 1: 4 , 20 mm avarage thick including all works completed as per the direction of Engineer in chargefor Sabarimala Navagraha temple
20Supplying and fixing ashlar pillars of specified design as per plan and sasthric priciples , having size 24.77cmX24.77cmand aheight of 198.13 cm including "OMA" & "KUDUMA" for fixing wooden "pothika" . All works completed as per the direction of Engineer in charge
21Supplying and fixing first quality teak wood wrought and put up for roof members including cost, conveyance andall works comple ted as per the sansthric principles and directions of Engineer in charge(Using departmental teak wood)
22Painting with oil type wood preservative of approved brand and manufacture : New work (two or more coats)
23Melamine polishing on wood work (one or more coat).
24Roofing with 22 guage copper shhet over Chempalaka, cutting ,making and fixing in position including value of copper sheet all labour charges etc complete as per the direction of Engineer in charge excluding the cost of copper nails
25Supplying copper nails
26Mirror polishing on marble work/Granite work/stone work where ever required to give high gloss finish complete.
27Painting with copper mettalic paint of approved brand and manufacture to give an even shade : Two or more coats on new work
28Relaying the ashlar stone (Department) in line and level as per the direction of Engineer in charge
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail