Indo Tibetan Border Police Force-ITBP has published Tender For Renovation And Upgradation Of 02 Nos 120 Men Barrack. Submission Date for this Tender is 24-04-2024. Barrack Tenders in shivpuri Madhya Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 02 No"S 120 Men Barrackat Telecom Bn, ITBP, Shivpuri. |
| 2 | Dismantling tile work in floors and scarting or wall tile laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles above 25 mm and up to 40 mm |
| 3 | Demolishing cement concrete manually /by mechanical means including disposal of material with in 50 metres leads as per direction of engineer -in -charge. Nominal concrete 1:4:8 or linear mix (i/c equilent design mix |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) including water proofing material as per direction Eng-in-Charge. |
| 5 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 6 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand) jointing with gray cement slurry @3.30kg /Sqm including pointing the joints with white cement and matching pigment etc., complete.KAJARIA/SOMANY/NITCO make. |
| 7 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per Sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 8 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer"s specification. Old work one or more Coat |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work |
| 10 | Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (One or more coat applied @ 0.90 ltr/10 Sqm). |
| 11 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 12 | Providing and fixing ISI marked flush door shutter confirming to IS : 2202 ( Part I )decorativre type , core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veeners on both faces of shutters . 35 mm thick including ISI marked stainless steel butt hinges with neccesary screws |
| 13 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned selected class of sheesham wood |
| 14 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 15 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :150x10 mm |
| 16 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. |
| 17 | Providing and fixing bright finished brass handles with screws etc. complete125 mm |
| 18 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 19 | Renewing glass panes with putty and nail wherever necessary including racking out the old putty: float glass panes of nominal thickness 4mm ( weight not less then 10 kg/Sqm) |
| 20 | Renwal of old putty of glass panels (length) |
| 21 | Providing & fixing highdensity polyethylene water storage tank IS 12701 marked with cover and suitable locking arrangement and making neccesary holes for inlets , outlets over flow pipes but without fitting and the base support for tank . 500 litre with necessary all GI PIPE fittings complete . |
| 22 | Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge. |
| 23 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). With Water proofing Compund |
| 24 | Providing & fixing water closet Squating pan ( Indian type W.C pan ) with 100 mm sand cast iron P or S trap , 10 letre low level white PVC flushing cistern , including flush pipe , with manually controlled device( hand lever ) confirming to IS : 7231 , with all fiittings and fixtures complete , including cutting and making good the wall and where required : White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 25 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 26 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of Four urinal basins with 10litre white P.V.C. automatic flushing cistern |
| 27 | Providing & fixing wash basin with CI brackets , 15 mm CP brass piller taps , 32 mm C.P brass waste of standard pattern , including painting of fitting and brackets , cutting and making good the walls wherever require: White vitious china wash basin size 630x450 mm with a single of 15 mm C.P brass piller taps |
| 28 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 29 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia |
| 30 | Providing and fixing soil, waste and vent pipes : 100 mm dia Sand cast iron S&S pipe as per IS: 1729 |
| 31 | Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes :100 mm dia pipe |
| 32 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall 20 mm nominal dia Pipes |
| 33 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall25 mm nominal dia Pipes |
| 34 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :15 mm nominal bore |
| 35 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore |
| 36 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore |
| 37 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore |
| 38 | Providing and fixing C.P. grating of approved quality and colourCircular type 125 mm nominal dia (With waste hole/without waste hole) as per direction Eng-in-Charge. |
| 39 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore |
| 40 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore |
| 41 | Supplyingand fixing 3 pin, 5 A ceiling rose on the existingjunction box/ wooden block including connections etc. as required. |
| 42 | Extraforfixingthelouvers/shutterscompletewithframefora exhaust fan of all sizes. |
| 43 | Supplying and fixing PVC batten/ angle holder including connectionsetc. as required. |
| 44 | Supplyingandfixingfollowingway,singlepoleandneutral,sheet steel, MCBdistributionboard,240 V, on surface/recess,complete withtinnedcopperbusbar,neutralbusbar,earthbar,dinbar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 06Way Double door |
| 45 | Supplyingandfixingfollowingway,singlepoleandneutral,sheet steel, MCBdistributionboard,240 V, on surface/recess,complete withtinnedcopperbusbar,neutralbusbar,earthbar,dinbar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 Way Double door |
| 46 | Supplyingandfixingfollowingway,singlepoleandneutral,sheet steel, MCBdistributionboard,240 V, on surface/recess,complete withtinnedcopperbusbar,neutralbusbar,earthbar,dinbar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 16 Way Double door |
| 47 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles intheexistingMCBDBcompletewithconnections,testingand commissioningetc. as required. Single pole |
| 48 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles intheexistingMCBDBcompletewithconnections,testingand commissioningetc. as required. Double pole |
| 49 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. |
| 50 | Providing and fixing following rating and breaking capacityand pole MCCB withthermomagneticrelease andterminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB |
| 51 | supply and fixing following way, horizontal type three pole andneutral,sheetsteel,MCBdistributionboard,415V,onsurface/ recess, completewith tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolator)6 way (4 + 18), Double door |
| 52 | Rewiring for light point/fan point/exhaust fan point/bell point with 1.5Sqmm FRLS PVC insulated copper conductor single core cable and 1.5Sqmm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required Group A |
| 53 | supplying and fixing piano type switch/socket on the existing box/cover including connections etc. 5/6 Swtich/socket |
| 54 | supplying and fixing piano type switch/socket on the existing box/cover including connections etc. 15/16 Swtich/socket |
| 55 | Providing & fixing 20 Watt 4" long Led tube complete fitting with quality & make as per approved by engineer in charge |
| 56 | Providing & fixing 5 Watt 1.5" long Led tube complete fitting with quality & make as per approved by engineer in charge |
| 57 | Providing, installation & Tesing of Transair Resersible Exhaust fan Sweep 300 mm Power inputs 70 Watts Speed 1380 RPM Air delivery 1600 (CMM) |
| 58 | Providing, installation & Tesing of decorative type Mirro light 1 Feet size (bajaj/havell/Crompton) |
| 59 | providing and installation of 8 or 12Watt Bulb on existing holder. |
| 60 | providing and installation ofStep type fan regulator 06 amp |
| 61 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete :250x 16mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
