Military Engineer Services-MES has published Tender For Periodical Services To Internal Surfaces And External Surfaces Of Md Accommodation And Otm Accommodation Of Bldgs And Repairs To Roof Treatment Of Certain Buildings In Area No 2 Under Ge Belgaum.. Submission Date for this Tender is 06-05-2024. Shed Construction Tenders in belgaum Karnataka. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Material and labour for Preparation of old decorated surfaces of wallbybrooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling holes, cracks with cement base putty and applying one coat of oil emulsion distemper (white/Tinted) complete allas specified and asdirected. |
| 2 | Material and labour for Preparation of old decorated surfaces of wallbybrooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots ,filling holes ,cracks with cement base putty and applying two coat of oil emulsion distemper (white/Tinted) complete allas specified and asdirected. |
| 3 | Material and labour for Preparation of old decorated surfaces of ceilingbybrooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, filling holes, cracks with cement base putty and applying one coat of oil emulsion distemper (white/Tinted) complete allas specified and asdirected. |
| 4 | Material and labour for Preparation of old painted wood and wood based surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed. |
| 5 | Material and labour for Preparation of old painted steel and steel based surface of any description of size not exceeding10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed. |
| 6 | Material and labour for Preparation of old painted steel and steel based surface of any description over but not exceeding10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed. |
| 7 | Material and labour for Complete removal of existing treatment on wall with wire brush ,scrapping down smoke soot ,mould , moss and efflorescent salts ,trading oil and greasy spots ,filling holes ,cracks with cement base puttyand applying two coats of Oil Bound Distember over a coat of primer and a layer of 1 mm thick wall care putty including preparation of old decorated surfaces of wallcomplete all as specified and as directed. |
| 8 | Material and Labour for Complete removal of existing treatment on old walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqmincluding preparation of old decorated surfaces of wallcomplete all as specified and as directed. |
| 9 | Supply and fixSilver finished Stainless steel letters / numbers of approved itemmade out of 25mm x 2mm thick strips of height/width 100/100mm or equivalent size available from the manufacturer etc fixed over ACP boardof size 200mm x 200mm x 4mm , complete all as specified and as directed. |
| 10 | Material and labour for Preparation of old decorated surfaces of wall of any descriptionand applying two coat of cement based paint complete allas specified and asdirected. |
| 11 | Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth withoutusing extra cementincluding taking down cement plaster on brick or stone wall or ceiling concrete etc and racking out joints hacking for key scrubbing down with water etc complete all as directed. Note: Water proofing compound shall be measured and paid separately. |
| 12 | Supply only integral water proofing compound .Make ; Impermo/Roff/Cico |
| 13 | Material and labour for Rendering 10mm thick in CM 1:6 on brick surfaces and surface finished even and smooth without using extra cementincluding taking down cement plaster on brick or stone wall or ceiling concrete etc and racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. |
| 14 | Material and labour for Rendering 5mm thick in cement mortar 1:3 on fair faces of ceiling,surfaces finished even and smooth without using extra cement etc and racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 15 | Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc,complete all as specified and as directed. |
| 16 | Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a preparatory coat of chalk whitening on plastered surface over a coat of priming plastered and other surfaces with alkali resistant priming paint, completed all as specified and as directed. |
| 17 | Material and labour for Preparation ofnewly plastered ceilling surfaces of any descriptionand applying two coat of distemper oilemulsion over a coat alkali resistent primercomplete all as specified and asdirected. Note : (i)The contractor shall produce Original GST paidVouchers for the above mentioned items procured from the market before claming payment in GEs office Note: (ii)The item nos 1 to 17 ofBOQ shall be executed in high rise buildings of more than 02 floors and upto 03 floors. The contractor shall arrange necessary scaffolding/shoring and other safety measures to be undertaken including necessary insurance for the workers engaged by himduring the execution of work. |
| 18 | Disconnecting existing tanks of capacity 500 litre to 1000 litrefrom water supply conections, setting aside (or lowering if required) for repairs, cleaning, etc. and rehoisting if required reconnecting and re-fixing in position etc, complete all as specified and directed. |
| 19 | Supply and fix 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces to match with the existing surface complete all as specified and as directed.Note :Make of CPVC Pipe :Ashirwad/Astral |
| 20 | Supply and fix 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete to walls, ceilings or laid in floors including taking up or down existing unserviceable PVC/ GI tubes of any grade and making good disturbed surfaces to match with the existing surface complete all as specified and as directed.Note :Make of CPVC Pipe :Ashirwad/Astral |
| 21 | Material and labour for Providing roof treatment with APP modified water proofing membrane with the following specifications complete. all as specified and as directed. Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris outside the MOD premises Removing existing roof/ chajjas treatment of any type like plastic felt/ HP tiles of any description including taking down existing plastering/ concrete of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris outside the MOD premisesBrushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surface and rendering 10 mm thick in CM 1:3 mixed with water proofing compound and finishing surface even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately |
| 22 | Preparation of plastered surfaces by removing dust, dirt and applying oil bound bituminuous primer at the rate of 0.3 litre per Sqm andproviding APP modified water proofing membrane weight not less than 4.5kg/ sqm reinforced with non oven polyester mat of weight not less than 160gms per Sqm including minimum 10cm side/ over lap and applying a coat of hot blown bitumen grade 85/25 over membrane at the rate of1.2kg per Sqm and on drying applying a coat of solar reflective bituminuous aluminium paint at the rate of 0.1kg/sqm. NOTE: APP modified water proofing membrane shall be of any one of the approved makes as specified in Particular specification and shall confirm to specifications given in IS 16540-2017/ IS 16532-2017. Contractor shall produce necessary test certificate of the manufacturer to the Engineer-in-charge before incorporation in the work. Necessary independent tests shall also be carried out by the contractor without any extra cost to the departmentas per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work. |
| 23 | Material and labour for Providing water proof treatment to RCC roof with acylic polymer heavy duty fibre reinforced coating with the following specifications complete all as specified and as directed. The existing HP/ PCC/ MP tiles shall be dismantled alongwith screed bed and sub base if any and the RCC roof surface shall be prepared and made free from all dust, loose particles, laitance and sharp edges, fungus, algae, organic matters, etc. including removal of debris outside of MOD premises All cracks shall be repaired by cutting "V" groove along the longitudinal section of cracks and filling with polymer modified mortar admixed with Dr. Fixit Pidicrete URPat the ratio of 1:5:15 (URP : Cement :Sand respectively) All potholes and uneven surfaces shall be repaired with polymer modified mortar over a bonding coat of Dr. Fixit Pidicrete URP at the ratio of 1:1 (URP : Cement respectively) |
| 24 | Over the prepared surfaces one priming/ efflorescent coat of Dr. Fixit Primeseal shall be applied by diluting the primeseal with water at the ratio of 2:1 (Primer: Water respectively)Over the primered surfaces water proof coating shall be applied with acylic polymer heavy duty fibre reinforced coating of Dr. Fixit New Coat consisting of three coats of application to form 1mm thick heavy duty water proofing coating. NOTE: Water proofing chemicals shall be procured from approved manufacturer with prior written approval of GE. Full quantitiy of fresh chemicals required for incorporating in the work shall be brought to site with sealed containers. Water proofing treatment shall be carried out through authorised applicator of the manufacturer and the contractor shall produce necessary certificate of authentication to the Engineer-in-charge before commence of the work. |
| 25 | Material and labour for Providing sunken floor treatment with APP modified water proofing membrane with the following specifications complete all as specified and as directed. Removing existing floor treatment of any type and any description including taking down existing plastering of any thickness and cleaning the top surface of RCC slab with wire brush including removal of debris to a distance exc 50m but n exc 100m Brushing with neat cement slurry @ 3Kg/Sqm on cleaned RCC slab surfaces and rendering 10mm thick in CM 1:3 mixed with water proofing compound and finishing surfaces even and smooth without using extra cement. Note: Water proofing compound shall be measured and paid separately Preparation of plastered surfaces by removing dust, dirt & applying oil bound bituminous primer at 0.3 litre per Sqm & providing APP modified water proofing membrane weight not less than 4.5kg/Sqm reinforced with non oven polyester mat weight not less than 160gms per Sqm including min 10cm side/over lap & including applying a coat of blown hot bitumen grade 85/25 at 1.2kg per Sqm or cold application of bituminous elastomeric coat at 0.70 kg/ sqm |
| 26 | Material and labourfor Plain cement concrete 1:5:10, type E2, using 40mm graded stone aggregate as in filling under sunken floors etc, including demolition of existing cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level and removal of debris off the premises complete all as specified and as directed. |
| 27 | Material and labourfor 25 mm thick Plain cement concrete 1:2:4 type B0 using 12.5 mm graded stone aggregate as in sub base for floors including necessary steel form work complete all as specified and as directed. |
| 28 | Material and labour for Premium quality non- skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 sqm but n exc 0.11 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cementto match with the floorincluding cement screed bed or bedding layer of mortar in CM 1:6 , 15mm thickincluding dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premisescomplete all as specified and directed.complete all as specified and as directed. Make of Tile :HR Johnson/Kajaria/Naveen |
| 29 | Material and labourfor Premiumglazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm thick as in vertical surfaces such as skirting, dado and risers to steps etc, set and jointed in neat cement slurry and pointed in coloured cement to match the shadeof tiles over rendering 10 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat for dado, skirting etc including dismantlingwall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed.etc, complete all as specified and directed.. complete all as specified and as directed.Note : Make of Tile :HR Johnson/Kajaria/Naveen |
| 30 | Supply and fix in repair Vitreous china water closet, Pedestal type, white including flush pipe, seat cover etc and connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipes etc .complete all as specified and as directed. |
| 31 | Supply and fix in repairs Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white with integral foot rest including "P" or "S" trap etc.including provision of lime concrete bedding.complete all as specified and as directed. |
| 32 | Supply and fix in repairs CON-041KN 2 Way Bib Cockwith crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed. Make : Jaquar or equivalent product of Parryware Cat No : G4734A1 Two Way Bib Cock/ Hindware Cat No : F330004CP Bib Cock 2 in 1 as approved by GE. |
| 33 | Supply and fix in repair Health faucet , brass chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible PVC tube and wall hook including making connections complete all as specified and as directed. Make: JAQUAR or equivalent model in JOHNSON/ ESS ESS |
| 34 | Supply and fixin repair 15mm dia Bib tap, Fancy type CP brassscrewed down, screwed for iron pipe or for brass ferrule and fixedcomplete all as specified and as directed.Note : Make : Seico/Prayag/ESS ESS |
| 35 | Supply and fixin repairsSyphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe.complete all as specified and as directed.Note : Make :Parryware (Slim Line ) /CERA/ Hindware |
| 36 | Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed.Note :Make: Prayag /M/S Shakthi Industries |
| 37 | Supply and fix in repairs Plastic seat cover for EWC closed pattern with flat bottom and cover ,any colour as approved by GE and mild steel chromium plated hinging device completeall as specified and as directed.Note :Make :Parryware/CERA/Johnson |
| 38 | NOTE: The item of BOQ shall be executed in high rise building. The contractor shall arrange necessary scaffolding/ shoring, water pressure jet pump and other safety measures to be undertaken including insurance cover for the workers engaged by him during the execution of work. The rate quoted by the contractor for the above items shall be inclusive of the above provisions . Nothing extra on this account is admissible. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
