Delhi Development Authority-DDA has published Tender For Maintenance Of Various Shopping Centre In Trans Yamuna Area.Sh:Running, Maintenance & Operation Of Fire Fighting System, Clear Waterpumpset,Sub P/Set, Dg Set,Ei & Fans At Dda Building Laxmi Nagar Distt. Centre. Submission Date for this Tender is 29-04-2024. Fire Fighting Consumable Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 20-Apr-2024 | Due to administrative reason........... | Other | 22-04-2024 |
| 2 | 22-Apr-2024 | Due to administrative reason............. | Date | 29-04-2024 |
| Sl. No. | Item Description |
| 1 | 1.0) Running, maintenance & operation of various E&M services at DDA building Laxmi Nagar Distt. Centre. By deploying following manpower:- (i) Operator Gr.II 2 Nos. (ii) Lift OperatorGr. II2 Nos. (iii) Wireman Gr-II 1 No. (iv) Khallasi 1 No. Remark: a) 1/4th component for EI, b) 1/4th component for FF, c)1/4th component for lift & d) 1/4th component for DG Set. |
| 2 | 2.0) Servicing of DG Set 160 KVA (kirloskar make) including labour charges for complete servicing and testing i/c commissioning etc complete as reqd replacement/ repair/calibration of following, Diesel and oil filter, Air cleaner electrical, Coolant, Hose pipe set with clamp, Engine self repairing and servicing i/c replacement of part, Fuel pump repair and calibration, Engine oil. |
| 3 | 3.0) Supply & replacement of 20 W LED luminaire i/c lighting fixture with extruded polycarbonate housing, environmental friendly, energy efficient connection, testing etc complete as required. |
| 4 | 4.0) Supply and replacement of fan regulator switch in the existing electric board i/c connection, testing etc. as required. |
| 5 | 5.0) Supply and replacement of cooler pump 230 Volt, AC supply having 12.0 watt consumption with maximum water filled with lift 1.5 mtr. Immersion depth 200 mm connection, testing etc. as required. |
| 6 | 6.0)Supply & replacement of desert coolers pads of wool with mesh wire (3 Nos.) suitable for 18"/20" desert cooler i/c removal of old, cleaning of dust after removing cooler from the window and reinstallation of the same at window etc. Complete as required. |
| 7 | 6.1)Wood wool pad with wire mesh.- 3 Nos. |
| 8 | 7.0) Supply & replacement of cooler kit (Fan size 18"/20"i/c blade, motor) connection, testing, and commissioning etc. as reqd. |
| 9 | 8.0) Supplying and replacement round copper cable lead of size 40/76 mm three core of 3 Mtrs. long i/c providing/ fixing 3 pin 15 Amp top plug etc. complete as required. |
| 10 | 9.0) Rewinding of 48" ceiling fan oiling, greasing servicing, cleaning dismantling and re- assembling along with testing, commissioning etc. as required. |
| 11 | 10.0)Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. |
| 12 | 10.1) 5/6 amps switch |
| 13 | 10.2)3 pin 5/6 A socket outlet |
| 14 | 10.3) 15/16 A switch |
| 15 | 10.4) 6 pin 15/16 A socket outlet |
| 16 | 11.0)Repairing & rewinding of following rating submersible pump set (Motor & Pump) i/c remettling of impeller, bush, neck ring etc. complete as reqd. |
| 17 | 11.1)3HP |
| 18 | 12.0) Supply & replacement of following parts in existing electrical panel. |
| 19 | 12.1) DOL Starter(make- L&T or similar ) |
| 20 | 12.2) FASD ML 1.5 motor Starter (make- L&T or similar superior) |
| 21 | 12.3) 3 Pole 25 Amp. Contactor(make- L&T or similar) |
| 22 | 12.4)Overload Relaysuitable for ML 1.5 starter (make- L&T or similar ) |
| 23 | 12.5) Digital A. Meter, V. Meter of suitable range (L&T make, class 1 or similar) |
| 24 | 12.6) Single phase preventer (L&T Make or similar) |
| 25 | 13.0) Supplying of following sizes of XLPE aluminium conductor armoured Power cable 1.1 KV grade i/c connection & testing etc. as required and as per technical specification enclosed. |
| 26 | 13.1) 2C x 16 sq. mm. |
| 27 | 13.2) 4C x 25 sq. mm. |
| 28 | 14.0)Performing of following job for repairing 7.5 HP mono block pump set assembly (clear water)i/cdismantling ,re-assembling and testingetc.complete as reqd. |
| 29 | 14.1) Rewinding of Motor |
| 30 | 14.2) S/R of Ball bearing |
| 31 | 14.3) S/R of Gland Sleeve |
| 32 | 14.4)S/R of Neck ring |
| 33 | 14.5) Labour charges for servicing i/c cartage and assembling of pump set in suction line |
| 34 | 15.0)Performing of following job for repairing of 7.5 HP Veda pump set assembly (dewatering ) i/cdismantling ,re-assembling and testingetc.complete as reqd. |
| 35 | 15.1)Rewinding of Motor |
| 36 | 15.2) S/R of Ball bearing No. 3306 |
| 37 | 15.3) S/R of Ball bearing No. 6234 |
| 38 | 15.4) S/R of Mechanical seal |
| 39 | 15.5) S/R of Oil 1 Ltr. |
| 40 | 15.6) Rubber seals |
| 41 | 15.7)Labour charges for servicing i/c cartage and assembling of pump set in suction line |
| 42 | 16.0)Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 43 | 16.1) (a) Single pole |
| 44 | 16.2) (b) Single pole and neutral |
| 45 | 16.3) (c)Double pole |
| 46 | 16.4)(d)Triplepoleand neutral |
| 47 | 17.0) Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 48 | 17.1)40 A |
| 49 | 17.2) 60 A |
| 50 | 18.0) Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit as required. |
| 51 | 18.1) 3 x 1.5 sq. mm |
| 52 | 18.2) 3 x 2.5 sq. mm |
| 53 | 18.3) 3 x 4 sq. mm |
| 54 | 19.0) Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. (a) 25mm |
| 55 | 20.0)Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. (a) 120 mm dia (OD-120 mm & ID-103 mm nominal) |
| 56 | 21.0)Supply and replacement of 12 volt,180 AH DC battery, Exide make, fully charged for DG set i/c proper connection, testing commissioning and cartage complete etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
