|
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 2 | Of area 3 sq. metres and below |
| 3 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 4 | Dismantling of central AC plant duct and grills from the ceiling/ wall of average hall size 8.5x8.4 m including disposal of unserviceable material and stacking of serviceable material in the CSIR-HRDC store and allpipes average 50mm dia opening endscover with 5mm thick MS plate by welding and also cover duct opening average size 600x450 mmwith 6mm thick plyall complete as per direction ofEngineer-in-charge. |
| 5 | Covering the conference hall floor size 8.5x8.4 m andfurniture with plastic sheet and laying of POP on the plastic sheet as per site requirement andafter completion of the work it is remover and clean the hall all completed as per direction of EIC. |
| 6 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 7 | Second class teak wood |
| 8 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete : |
| 9 | 2nd class teak wood |
| 10 | 50x12 mm |
| 11 | 50x20 mm |
| 12 | Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. |
| 13 | 12 mm thick. |
| 14 | Providing and fixing 2mm thick 16 to 19mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 15 | Providing and making pattern on wall, the size of pattern 3000x1000 mm, made with 20mm thick heavy density artificial grassand fixedLED light lettersCSIR-HRDC , 304 SS Backlit Acrylicand logos with printon the base grass. The dimensions of the letter and logo as per enclosed drawing includingall required adhesive, nails and screws etc. all complete as per direction og EIC. Note : Basic frame work made under the item no.-7 as per designe provided by the EIC) |
| 16 | Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight miniral fiber RH-99 make : Armstrong or equivalentfalse ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal centre black T grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. |
| 17 | Note :- Only miniral fiber false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The miniral fiber ceiling tile shall have minimum NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. |
| 18 | Providing average 12 to 15mm thick Plaster of Paris (POP) false ceiling at all height including providing and fixing of frame work made ofgalvanized sections, power pressed from M.S. sheets and galvanized with zinc coating (both side inclusive) and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges, atmaiximum 1200 mm centre to centre or all framing are madeupas per required location of the light fitting, AC and any other ceiling items, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate / mainsG.I. channels 45x15x0.9 mm running at the spacing of1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval,fixing of chicken mesh to G.I. framand layed the Plaster of Paris POP on the meshand finishing to a flush smooth finish. Including making provision for the liner and profile lights and the cost of openings / cuttings for profile & other light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification, approved patterns and direction of the Engineer in Charge. (Note : All patta / designe are measured inSqm). |
| 19 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 20 | Providing and fixing ofaverage 14mm thick WPC acousticfluted / louver panel make Alstone / Trex / SV woods/ Georgeor equivalenton wallin any colour, texture, pattern and size including25 mm corner profile and end patty 2 mm thick andjointing each panel with minimum three standered fastner clip0.5 mm thicksteel and adhesive etc. ( as per manufactutrer) all complete as per direction of EIC. |
| 21 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 22 | French spirit polishing : |
| 23 | [a]Two or more coats on new works including a coat ofwood filler |
| 24 | Providing and installation ofSheer Dimount / Zebra roller blinds of any approved pattern / shade of makeVista/ MAC / DS or equivalent all complete as per direction of Engineer-in-Charge. |
| 25 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 26 | Two coats |
| 27 | Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 28 | Door chowkhats |
| 29 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 30 | Providing and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing Dorma /Dorset/Ozonetop & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer in charge (Door handle, lock and stopper etc. to be paid separately) |
| 31 | Providing and fixing stainless steel tubular D type glass door handle average 300 mm long and 32 mm outer dia with strainless steel screws etc complete as per direction of Engineer-in-Charge. |
| 32 | Providing and fixing wall to glass door lock one side key knob - Pin type lock for framless 12mm thick glass door (make Droma/ Ozone / Dorset/Godrejof approved quality including necessary cutting and making good etc. all complete. |
| 33 | Providing and installation of designer glass film on the door and windows of make 3M / Garvare or equivalent all complete as per direction of Engineer-in-Charge. |
| 34 | Fabrication and installation of both side pre- laminated file / UPS cabinate with opnable shutter with louvers average size (LxHxW) 1.35m x 1.05X0.40m with 8mm thick glass top, the cabinate vertically and horizontally divided in 2 parts. The cabinate have 2 drawers with stainless steel telescope channel, all completewith 18mm& only back 6mm thick high density high moisture resistance (HDHMR) board of approved brand Action Tesa / Century / Crossbond or equivalentincluding all required material like board, edge bend tape, fevicol-heatex, hardware, self cam Hinge, Handles, locks , right angle connector, screws, cutting / holeand jointing etc all complete as per direction Engineer-in-Charge. |
| 35 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge: |
| 36 | All kinds of soil |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to V level : |
| 38 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mmnominal size derived from natural sources) |
| 39 | 1:5:10 (1 cement : 5 fine sand derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 40 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 41 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 42 | 12 mm cement plaster finished with a floating coat of neat cement of mix : |
| 43 | 1:4 (1 cement: 4 fine sand) |
| 44 | Providing and fixing porta cabin Size6\"x 4\" (with door and window ), 8\" - 6\" height from the centre. The porta cabin outer frame made of 50x50 mm square pipe, fram cover with 1.2 mm MS corrugated sheet 18 gauge thickness,floor made up with 18mm board with 1mm vinyle carpet and internal wall paneling with 6mm pre laminated ply, and the gap between outer and inner paneling filled with 50mm thick rock wool. Thewindow made with aluminium and provide one wooden slab size 36\"x18\" including tube light and required switch and sockets etc. for fan and othe uses etc. The outer sheet painted with synthetic enemal paint all complete as per direction of Engineer -in-charge. |
| 45 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. |
| 46 | Group C |
| 47 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel / PVC conduit as required. |
| 48 | 2 x 1.5 sq. mm |
| 49 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 50 | 20 mm |
| 51 | 25 mm |
| 52 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required |
| 53 | Installation,testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types,complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. |
| 54 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required. |
| 55 | Supply, Installation, testing and commissioning ofBlue/warm white/ green etc. LED self adhesive strip /rope light ofapproved brand Havells / Philips / Wipro/Bajaj or equivalent, 12V- 24W for 5 mtrs LED strip / rope 120 LED chips/m with required amps Adepter / Drivers/ connector etc. all complete as per direction of Engineer-in-Charge. |
| 56 | Supply of following electrical fittings make: Havells / Crompton / Philips/Bajaj: |
| 57 | Round concealed LED Down Light 6\" dia , 15 Watt suitable for false ceiling |
| 58 | Recessed LED pannel Light average size 600x600 mm36 watt, input voltage range : AC90-300V, 50Hz, lumens : 3600Lm and suitable for grid false ceiling. |
| 59 | Supply, installation, testing and commissioning make of Deikin / LG / Hitechi / Bluestar of4-way 2 TR inverterCassette Type ceiling mouted 3 star rating Air conditioner with scroll / rotory having eco firendly refrigerent single phse,230 V ± 10%, 50HzincludingIndoor , out door units with decorative grills and coad less remote and machine shall have copper condensiorwith out door unit . Also prove powder coated MS stand for outdoor unit and proper comprehensive warranty certificate to be after installation all work completed as per direction of Engineer-in-Charge. |
| 60 | Supply and fixing of Automatic 5KVA 140-280V Copper Digital Voltage stabilizer for 2 tone cassette Air- Conditioner with TDR of approved brand Blue bird / Sky line / V-gaurd / Microtechall complete as required. |
| 61 | Providing and fixing of insulated drain pipe with nitrite rubber insulation for unitsin clamping manner above false ceiling and in concealed manner below false ceiling level from the structural ceiling should hanged using self threading rod or shall be fixed on the wall / beam etc. with clamps and the distance between two clamps shall be less then 1 mtr. All drain pipe of split / cassette Air condistioner should be PVC of suitable size as per site requirement all complete as per direction of Engineer-in-Charge. |
| 62 | Providing and fixing of refrigerent softcopper pipping cassette AC laid between indoor and outdoor units as per site requirement and insulated with class \"O\"fire retardant sleeve type elastomeric nitrite rubber insulation the item also includes copper electrical flexible cable of appropriate size , aluminiume foile membrane shall be applied to provide resistance against brekdown due to UV rediation for exposed portion of the rubber insulation with nitrogen testing. It sall be in total clamping mannerabove false ceiling and in total concealed manner below false ceiling level. From the structural ceiling it should hanged or shall be fixed on wall and beam etc. with clamps and the distance between two clamp shall be less than 1 mtr. The diameter / gauge of the refrigerant pipe shall be as per the specification or as per site requirement. The above item include the cost of three core flexible electrical cable as per recomended by the Eingineer-in-Charge. |
| 63 | Desmentling of old flourocent light fitting recessed / surface size average 1200x300 mm / 600x600 mm complete as required. |
| 64 | Buy back of following electrical and civilitems \" As is where is basis\": |
| 65 | (a) Wooden wall panneling with fram |
| 66 | (b ) GI AC Duct / Grill/ MS etc |
| 67 | (c ) Flourocent light fitting Size- 1200x300 mmand 600x600 mm |
