Goa Tourism Development Corporation Limited has published Tender For Providing Strong Room, Counting Station , Pandal And Barricading Around Strong Room At Damodar College Of Commerce And Economics For The Lok Sabha Election 2024. Submission Date for this Tender is 18-04-2024. Barricades Tenders in South Goa Goa. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. |
2 | Providing MS plate in the base for support for steel sectionincluding welding and etc complete |
3 | Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as per the direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately) |
4 | Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead and disposing off |
5 | Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint. |
6 | Providing MS plate in the partition for support for steel sectionincluding welding and etc complete |
7 | Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead and disposing off |
8 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade. |
9 | Providing and fixing M.S. door latch/ Aldrop with Weld etc. complete |
10 | Providing and fixing M.S. Tee hinges bright finished or and black enamelled, with necessary weld etc. complete |
11 | Providing and fixing M.S. handles with weld etc. complete. |
12 | Providing and fixing M.S. tower bolts (barrel type) with necessary weld etc. complete |
13 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in : a) All kinds of soil |
14 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : a) All works upto plinth level |
15 | Steel work in single sections (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) including cutting, hoisting fixing in position and applying a priming coat of red lead paint.a )In R.S. joists, channels, angles, tees |
16 | Providing corrugated G.I. sheet roofing, fixed with galvanized iron j or 1 hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers filled withwhite leadcomplete excluding the cost of purlins rafter and trusses.0.63 mm thick sheet - 24 G |
17 | Dismantling G.I. sheets roofing includingridges, hips valleys and gutters etc. and stacking the material within 50 meters lead. And disposing off |
18 | Dismantling steelwork in built up sections in angles, tees, flats and channels including all gusset plates bolts, nuts, cutting dismembering and staking within 50 mts. Lead and disposing off |
19 | Providing and fixing 1 mm thick M.S. sheet garage door with frame of 40 x 40 x 6 mm angle iron 3.15 mm M.S. gusset plate at the junction and corners, all necessary fitting complete including applying a priming coat of red lead paint.Using M.S. angles 40 mm x 40 mm x 6 mm for diagonal braces. |
20 | Making good the walls, slab, floor by griouting, plastering replacing the floor tites etc |
21 | Providing Waterproof Pandal complete of size 10 Mtr X 6 Mtr |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail