Rural Works Department has published Tender For Construction Of Multipurpose Cyclone Shelter At Nalapahi In The District Of Kendrapara.. Submission Date for this Tender is 19-04-2024. Building Work Tenders in kendrapara Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Providing & erecting necessary plants, equipments and labour for boring holes and casting of 450 mm dia bored cast-in-situ double under reammed RCC piles of 13.0 mtr length below the finished ground level as per drawing or as directed by the Engineer-in-charge for all piles with RCC M30 grade desgin mix concrete and rate shall include supply and cost of all materials such as stone chips, sand, cement and bentonite with all leads and lifts of materials but excluding the cost of reinforcement and the cost of boring holes for piles shall be included in the unit rate of piles. or as directed by the Engineer -in -charge. |
| 3 | Pile Foundation |
| 4 | Earth work inexcavation in hard soil by manual means overareas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan)inculding disposalof excavated earth up to50 m and lift upto 1.5m with all lead and lift including shoring, shuttering & dewatering (if required) with cost of all Labour, Labour cess ,Hire & Running charges of thewater pumps, Sundries, T & P required for the work complete as directed by the Engineer- in- charge. |
| 5 | Ground Floor |
| 6 | Approch Road |
| 7 | Filling foundation trenches and plinth with excavated earth including laying the earth in layers not exceeding 23.5cm (9”) thick ramming and watering with all leads and lifts including cost of all labour, T&P etc. complete as directed by the Engineer-in-charge. |
| 8 | Ground Floor |
| 9 | Approch Road |
| 10 | Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. |
| 11 | In Foundation |
| 12 | Providing and laying Plain cement concrete of proportion(1:3:6) in foundation and floors(i.e. below the base course of the flooring) using cement, 40mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, laid in layers not exceeding 15cm thick in each layer including cost, conveyance, loading, unloading,royalities and taxes of all materials, cost of all labour,T&P required for the work including shoring,shuttering anddewatering(if required)including hire and running chargesof water pump required for the work etc. complete in all respect as directed by the Engineer-in-charge. |
| 13 | Ground Floor |
| 14 | Approch Road |
| 15 | Providing and laying Plain cement concrete of Plinth proportion (1:2:4) in foundation and floorsusing cement, 12 mm. Size crusher broken H.G.Metal and screened and washed sharp river sand for mortar of approved quality and from approved quarry inclduign hoisting, lowering and laying concrete to the required level, ramming,watering and curing etc. completek to required levels, etc. complete in all respect as directed by the Engineer-in-charge. |
| 16 | Ground Floor |
| 17 | Cement Concrete Block pitching with CC M 20 of 100mmthick of required size as approved by the Engineer in slope and approns |
| 18 | Ground Floor |
| 19 | Providing and laying in position ready mixed M-30 grade concrete having compressive strength at 28 days testnot less than 300 kg/ sq.cmfor reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying , including the cost of centering, shuttering finishing and excluding reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, and hoisting, lowering, laying and compacting concrete, watering and curing and finishing the exposed surfaces smooth with cost, conveyance, royalties, taxes of all materials with all labour,Labour cessand T&P required for the work improve workability without impairing strength and durability as per direction of the Engineer - in - charge. |
| 20 | R.C.C in Pile Cap, Grade Beam & Plinth Beam |
| 21 | R.C.C in Column |
| 22 | Ground Floor |
| 23 | First Floor |
| 24 | Second Floor |
| 25 | R.C.C in Roof Beams |
| 26 | Ground Floor |
| 27 | First Floor |
| 28 | R.C.C in Roof Slab |
| 29 | Ground Floor |
| 30 | First Floor |
| 31 | Second Floor |
| 32 | R.C.C in Staircase |
| 33 | Ground Floor |
| 34 | First Floor |
| 35 | R.C.C in Lintel |
| 36 | First Floor |
| 37 | R.C.C in Ramp |
| 38 | Ground Floor |
| 39 | R.C.C in Chajja, Shelf/Loft |
| 40 | First Floor |
| 41 | Plain Cement Concrete Pavement. work of M-30 grade with 20mm and down grade black hard granite(crusherbroken) stone chips of approved quality from approved quarry including hoisting and laying concrete watering and curing etc. complete inlcuding cost, conveyance, royality and taxes of all materials and cost of all labour with T & P required for the work complete as per the specification and direction of the Engineer-in-charge. |
| 42 | Approch Road (M-30 Grade Concrete) |
| 43 | Supplying, Cutting, Straightening coiled or bent up HYSD/TMT Reinfocement Bars welding or jointing if necessary ,bending, binding, tying the grills as required for R.C.C. works, providing Fan Hooks where necessary and hoising, lowering and placing the same tin proper position according to the approved eesigns and drawings in all floors including cost, conveyance, loading, unloading and taxes or HYSD/TMT Reinforcement Bars and Binding wieres of 18 to 20 gauge required for the work cost of all labour,T&P and scaffolding complete in all respect as directed by the Engineer-in-charge(Payment will be made according to the actual/proper weight of HYSD/TMT Reinforcement Bars and Binding wires consumed in the particular work only) fe 550 |
| 44 | Ground Floor |
| 45 | First Floor |
| 46 | Second Floor |
| 47 | Fly ash brick masonry using fly ash bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with cement after immersing the bricks for 6 (Six) hours in water before use in superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, coveyance, loading and unloading, royalties and taxes of all materials and cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge. |
| 48 | Ground Floor |
| 49 | First Floor |
| 50 | Second Floor |
| 51 | Providing 20 mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside) |
| 52 | Ground Floor |
| 53 | Providing 16mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Inside) |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Second Floor |
| 57 | Providing 12mm. Thick cement plaster in cement mortar or mix(1:6) in all floors at all height with cement & screened and washed sharp river sand for mortar and finished smooth to the rough surface of the brick masonary walls after racking out the joints (alongwith providing grooves wherever necessary) including watering and curing,rounding of corners etc. complete with cost, conveyance, loading, unloading, royalities and taxes of all materials,cost of all labour,T&P, and scaffolding required for the work etc. as directed by the Engineer-in-charge. (Outer side) |
| 58 | Ground Floor |
| 59 | First Floor |
| 60 | Second Floor |
| 61 | Providing6 mm thick cement plaster in cement mortar of mix (1:4)at all height using screened& washed sharpriver sandformortar with approved quality of cement tothe ceilingofthe Roof Slab, Staircase,Beams, Columns, Landings, Railings, Chajja ,Fins ,Walls ,Jallyand Shelves etc. including roughening, scraping, chiseling, cleaning, closed deep chipping with slurry treatment and finished smooth to allR.C.C. Surface including cost, conveyance, loading, unloading, royalties ,stacking and alltaxes , cost of all Labour,Labour cess ,Sundries, T&P, Scaffolding, Watering,Curing etc. complete in all respect as directed by the Engineer- in- charge. |
| 62 | Ground Floor |
| 63 | First Floor |
| 64 | Second Floor |
| 65 | Wall painting two coats with Weather coat paint (1st quality) exterior grade of approved make & with a approved quality primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance,cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. |
| 66 | Ground Floor |
| 67 | First Floor |
| 68 | Second Floor |
| 69 | Providing Premium Ceramic Tilesflooring using matte Ceramic tiles of premium grade having thickness of 8 to 10mm conforming to IS 13756 ofcolour/printed series (homogeneous) of approved quality, colouror equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost, conveyance, loading, unloading, royalties and taxes of all materials,cost of all labour, sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. MakeJohnson/ Kajaria/ Rak/ Ceramic or equivalent |
| 70 | Ceramic Tiles |
| 71 | Ground Floor |
| 72 | First Floor |
| 73 | Supplying, fitting & fixing of Kota tilein floors of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge. |
| 74 | Ground Floor |
| 75 | First Floor |
| 76 | Providing Premium Ceramic Tilesin skirting & Dadousing matte Ceramic of premium grade having thickness of 8 to 10mm conforming to IS 13756 ofcolour/printed series (homogeneous) of approved quality, colouror equivalent in dados & skirting on 12mm thick bed of cement mortar of mix (1:3) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with required quantities of pigments of approved marks to match the shades of the vitrified tile if required watering and curing for 21 days including cost, conveyance, loading, unloading, royalties and taxes of all materials,cost of all labour, sundries,T & P required for the work complete in all respect as directed by the Engineer-in-charge. MakeJohnson/ Kajaria/ Rak/ Ceramic or equivalent |
| 77 | Ceramic tiles |
| 78 | Ground Floor |
| 79 | Supplying, fitting & fixing of Kota tilein Skirting of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge. |
| 80 | First Floor |
| 81 | Supplying, fitting & fixing of Chequered Tilesin Skirting of approved make laid on 20 mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with slurry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge. |
| 82 | First Floor |
| 83 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. |
| 84 | Ground Floor |
| 85 | First Floor |
| 86 | Finishing wall surface of walls with cement basedwall putty ( water based) of approved make and finished smooth and even surface to receive painting including cost, conveyance,taxesof all materials , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge. |
| 87 | First Floor |
| 88 | Second Floor |
| 89 | Wall painting two coats with Acrylic paint (Plastic Emulsion) of approved quality of premium brandof approved quality & colourat all heights to the interior surface of the wall to make an even finishedsurface includingsand papering, applying putty wherever necessary including cost, conveyance, loading, unloading, stacking,all taxes , cost of all Labour , Labour cess,scaffoldings, staging, sundries,T&P etc. required for the work complete as directed by the Engineer-in-charge. |
| 90 | First Floor |
| 91 | Second Floor |
| 92 | Supplying and fixing 46 mm size thick GI Doors and frame conforming to IS 277 galvanised plain skin passed sheets of 0.80mm in shutter & 1.20mm in frame with minimum 120 GSM zinc coating with profile dimension of 100mm x 58mm frame filled with polyurethane frame and shutter duly filled with Honeycomb and both coated with minimum 60 microns of RAL / wood finish powder coating accessories will be provided with doors etc complete. (TATA Pravesh or equally reputed brand). |
| 93 | First Floor |
| 94 | Supplying & fixing GI Window (IS 513 D quality) and frame conforming to IS 277 galvanised plain skin passed sheets of 0.6mm in shutter & 0.8mm in frame with minimum 120 GSM zinc coating and fitted with acryllic sheet of 4mm thickness & MS Grill of 10mm square MS bright bars coated with zinc phosphate primer or thermos etting Polyurethane paint of aliphatic grade providing high level of scratch resistance and durability accessories will be provided with windows etc complete. (TATA Pravesh or equally reputed brand). |
| 95 | First Floor |
| 96 | Fitting fixing of F.R.P panelled shutter with F.R.P door frame in doors including cost of stainless steel hinges, screws ,aluminium aldrops, tower bolts, handles of approved quality size and make as per the direction of the Engineer-in-charge with sand blocks and hinged cleats cost, conveyance, royality and taxes of all materials and labour etc. complete in all respects. |
| 97 | First Floor |
| 98 | Making grooves of 3 mm deep & 10mm wide on plastered surface at all joints of concrete & brick masonry including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.. |
| 99 | First Floor |
| 100 | Providing, fitting & fixing Ventilators of size 600mm x 300mm with well seasoned chemically treated sal wood frame and with Acrylic sheet louver with approved jally including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge.. |
| 101 | First Floor |
| 102 | Supplying, fitting and fixing of Angle iron Door frame , Window frame, Window frame with grill using A.L size of ( 40 x40 x 5 ) mm M.S flats (25 x 5 ) mm including cost ,conveyance etc including cost of all materials & labour T&P etc required for the work all complete as per direction of the Engineer-in-charge. |
| 103 | First Floor |
| 104 | Painting two coat with approved synthetic enamel paint to new wood & iron workincluding cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 105 | First Floor |
| 106 | Fixing and fitting 110 mm dia PVC rain water down pipe spouts of 500 mm length including cutting holes in parapet making good to the damages in CC 1:2:4 with portland slag cementincluding cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 107 | First Floor |
| 108 | Providing Black board of size 2m x 1.5m over brick walls 20mm thick cement plaster including cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 109 | First Floor |
| 110 | Providing and fixing a Marble Plaque of size 5"x2.5"x1" (thick) with engraving informations for usersof all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 111 | First Floor |
| 112 | Providing 20 mm thick cement plaster ( 1:4 ) for grading plaster over roof slab includingcost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 113 | First Floor |
| 114 | Second Floor |
| 115 | Construction of embankment with approved material obtained from borrow pits with all lead and lifts, transporting to site by mechanical means within a lead of 5 km., spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications etc. complete. |
| 116 | Approch Road |
| 117 | Area Developement |
| 118 | Supplying and Laying of Heavy duty factory made Interlocking Approved Brand Paver Block of 80 mm thick coral shaped on preparation of sub base with 30 mm sand and levelling laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc. complete as per direction of Engineer-In-Chief. |
| 119 | P.HWorks |
| 120 | Supplying all materials labour T&P and fitting & fixing UPVC SWR ventilating pipe and fitting of the following OD conforming to ISI No.4985/2000 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC. .a) 110mm dia U-PVC Pipe . |
| 121 | b) 110mm dia U-PVC "P" Pipe . |
| 122 | c) 110mm dia U-PVC D/J Door . |
| 123 | d) 110mm dia U-PVC S/J Door |
| 124 | e) 110mm dia U-PVC "Door Bend. |
| 125 | f) 110mm dia U-PVC "Plain Bend |
| 126 | g) 110mm dia U-PVC vent Cowl |
| 127 | h) 110mm dia U-PVC Offset |
| 128 | i) 110mm dia U-PVC" Pilain Tee. |
| 129 | j) 125mm dia C.P grating |
| 130 | k) 75mm dia U-PVC Pipes |
| 131 | k) 75mm dia U-PVC PlainBend |
| 132 | l) 75mm dia U-PVC Door Bend |
| 133 | m) 100 x 75mm U-PVC Non-Trap |
| 134 | Supplying all materials labour T&P and fixing water closet, squatting pan(Orissa pattern squatting pan) duly embedded in cc(1:5:10) using 4cm hg metal uncluding fixing a pair of vitreous china250mm x 130mm x 30mm footrest etc.all compt. as per specification and direction of EIC . 580mm size Orissa Pan (Neycer /Cerra /Parry ware / Hindware) |
| 135 | Supplying all materials labour T&P and fixing Wash Down water closet,(E.W.C pan) with Integral "S" or "P" trap to floor with wooden plug and C.P screws including jointingthe trap with soil waste pipe in (1:1) & PVC Seat cover etc all complete. as per specification and direction of EIC . a) E.W.C with "S"trap plan |
| 136 | Supplying all materials labour T&P and fixing Plastic Seat cover for E.W.C with chromium plated brass hinges and rubber bufflers all complete as per specification and direction of E.I.C .(Neycer /Cerra /Parry ware / Hindware) |
| 137 | Supplying all materials labour T&P and fixing wash basins with C.I or M.S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screw and cement etc .fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste etc all compt. as per specification and direction Of EIC.a) 550x400mm WHB 32mm dia C.P waste & 32mm dia pvc wash pipe with brass coupling nut. |
| 138 | Pedestrial for W.H.B |
| 139 | Supplying all materials labour T&P and fixing mirror of superior glass mounted onplywood Frame andhanging the wall complete. as per PH specification and direction of EIC.600x400mm BE Mirror (Fixed type) |
| 140 | Supplying all materials labour T&P and fixing standard size CP towel rail/ring compt. With CP brass brackets fixed to wooden plugs with CPscrews as per PH specification and direction of EIC.a) 20mm x 450mm long C.P Towel rail |
| 141 | b) C.P Towel Ring (St.) |
| 142 | Supplying all materials labour T&P and fixing standard size CPsoap holder completewith cp brass brackets fixed to wooden plugs with CP screws as per PH specification and direction of EIC.a) CP soap holder |
| 143 | Supplying all materials labour T&P and fixing standard size Acrylicshelfwith CP brass brackets and guard rails complete fixed to wooden plugs with CP screws as per PH specification and direction of E.I.C.a) 4500mm x 125mm size Plate Acrylic Shelf |
| 144 | Supplying all materials labour T&P and cutting holes through brick/stone masonry wall for taking PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per PH specification and direction of EIC. (a) 250mm thick wall |
| 145 | b) Cuttting holes through RCC roof |
| 146 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:2:4) mix using 12mm size hg chips foundation concre3te(1:4:8) using 40mm size hg metal on bed and around trap Fly ashBrick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mmx 100mm size HCI gully trap 150mmx150mm size C.I grating etc. all complete as per approved drawing specification and dir of EIC.a) Inside size 250mmx250mm gully trap |
| 147 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, Fly ash Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, earth work excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of E.I.C.a) Inside size : 760 x 760 x 460mm Inspection Chamber |
| 148 | b) Addle depth |
| 149 | Supplying all materials labour T&P and construction of Man hole chamber of the following sizes with cc (1:3:6) using 40mm size hg metal on bed, Fly ash brick work in CM (1:6) moulding and shaping the channel inside and benching with cc (1:1.5:3) using 12mm size H.G chips 12mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside RCC cover slab in C.C (1:1.5:3) using 12mm size hg chips with RCC man hole cover, eath work in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty, taxes etc. all complete as per approved specification and direction of EIC. a) Inside size 910x910x910mm |
| 150 | Supplying all materials, labour, T&P and constructing soak way pit of the following sizes with precast R.C.C rings joined loose gravel backing in the rear of well steining, precast R.C.C cover slab in c.c.(1:1.5:3) using 12mm size h.g. chips fitted with iron lifting handles including e.w. in open well excavation in all kinds of soil and refilling the cavity around the pit & painting the iron works, watering ,curing, conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per approved drawing, specification and direction of E.I.C. a) 0.91 mtr dia x 2.10 mtr. deep |
| 151 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and Fly ash Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of E.I.C..a) 1.40m dia x 2.00m deep soak way pit |
| 152 | b) 1.200m dia x 2.00m deep Soakway pit |
| 153 | Supplying all labour materials T&P and laying of U-PVC Pipe and aligning to requisite gradient inside the trenches encasing all round encasing all round of pipe with CC (1:3:6) using 4CM size hg metal in bed of trenches including lowering the pipe in the bed of trenches in all kinds of soil refilling the same in layer of 0.80mtrs. with watering and ramming removing of surplus earth testing of sewrage line including use of T&Pas per P.H specification and direction of E.I.C. a) 110mm dia U-PVC Pipe Sewerage line withall round encasing (IS 4985/2000(4Kg/Cm2) |
| 154 | b) 160mm diameter U-PVC pipes Sewerage line with all round encasing (IS4985/2000(4Kg/Cm2) |
| 155 | Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. (a) Initial lift upto 1.5 mtr |
| 156 | From 1.5 mtr to 3.0 mtr depth |
| 157 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C. |
| 158 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalry, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 159 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 160 | Supplying all materials,labour, T&P and providing Brick work with Flyash Brick 25cm x 12cm x 8cm size having crushing strength not less than 75 Kg/CM2with dimensional tolerence of +/- 8% in C.M (1:4)including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a) In Foundation and Plinth in C:M (1:3) |
| 161 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a)20 mm thick C.P in C:M (1:4) |
| 162 | 12 mm thick C.P in C:M (1:4) |
| 163 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. |
| 164 | Supplying all materials, labour,T&P and providingcement flush pointing to brick masonary (1:3)includingwatering curring and conveyance of all materialsto work site, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C. |
| 165 | Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size H.G chips for R.C.C works including hoisting, laying ,watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as perspecification and direction of the E.I.C. |
| 166 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C. |
| 167 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.(a) R.C.C Slab |
| 168 | Supplying all materials, labour, T&P and providing 2" R.C.C.bafflewall pre-cast with.C.C(1:1.5:3) using 12mm b.h.g chips fitted to septic tankas per P.H specification and direction of the E.I.C. |
| 169 | Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee in all including supply of all jointing material etc. all complete material as per specification and direction of the E.I.C. a) 160mm x 160mm x 110mm PVC Tee |
| 170 | Supplying all materials, labour, T&P and providing pre-cast R.C.C. Manhole cover with C.C.(1:1.5:3) of 12 MM h.g. chips including conveyance of all materials to site after payment of royality and taxes etc.all complete as per PH.Specification and direction of E.I.C. |
| 171 | Supplying all materials, labour, T&P and fixing M.S. Step Iron in 20mm Dia M.S Steel Bar and fixing into walls ofSeptic Tanks duly embeded inC.C(1:3:6)all complete as per P.H specification and direction of the E.I.C. |
| 172 | Filling Foundation and Plinth with excavated material includingwatering, rammingas per direction of the E.I.C. |
| 173 | Supplying all labour materials T&P Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated usingE-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size "S" shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre"s standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the E.I.C |
| 174 | Supplying all labour materials T&P Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 175 | Supplying all materials labour T&P and fixing Ceramic tiles in floors, tread & landingon 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbins and polishing complete as per specification and direction ofE.I.C. 1st floor of ladies toilet |
| 176 | b) 1st floor of Gents Toilet |
| 177 | Supplying all materials labour T&P and fixing porcelain glazed tilestiles in dados/ skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rubbins and polishing complete as per direction of EIC. a) 1st fllor of ladies toilet. |
| 178 | b) 1st floor of Gents Toilet |
| 179 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor PVC pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and dir of EIC.a) 15mm dia C-PVC Pipe (internal) |
| 180 | b) 20mm dia CPVC pipe (internal) |
| 181 | c) 25mm dia PVC (ASTM) pipe (External) |
| 182 | d) 32mm dia PVC (ASTM) pipe (External) |
| 183 | Supplying all materials labour T&P and cutting holes through in R.C.C fllors, roof etc. Upto 19cm thick for passing G.I/ PVC pipes and fitting and repair the holes after inserting of pipe etc. with C.C (1:1.5:3) including finishing complete as per PH specification and direction of E.I.C. |
| 184 | Supplying all materials labour T&P and cutting grooves in pucca floora and wall for taking G.I/P.V.C pipes and making good the damagesas perdirection of E.I.C. |
| 185 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per Specification and direction of EIC.a) 15mm dia CP S.B Bib cock (Jaquar make) |
| 186 | b) 15mm dia C.P L.B Bib Cock (Jaquar make) |
| 187 | c) 15mm dia C.P Angle Stop Cock (Jaquar make) |
| 188 | d) 15mm dia C.P Pillar Cock (Jaquar make) |
| 189 | e) 15mm dia C.P Concealed Stop Cock (Jaquar make) |
| 190 | f) 15mm dia C.P Extension Nipple |
| 191 | g) 15 x 100mm C.P Shower (Jaquar make) |
| 192 | h) 25mm dia F.W.V |
| 193 | i) 32mm dia F.W.V |
| 194 | Supplying all materials labour T&P and fixing bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemps etc. allcomplete as per PH specification and direction Of EIC.a)Standing Urinal (Cerra / Parry ware / Hindware) |
| 195 | Supplying all materials,labour, T&P and fixing glazed earth wire squatting plate size 600x300mmwith integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm C.C(1:5:10) using 40nn h.g metal l completeas per specification and direction of the E.I.C.a) Squttingurinal (Ladies) (Cerra/Parry ware / Hindware) |
| 196 | Supplying all materialslabour T&P and fitting and fixing 10 ltr capacity PVC low level flushing cistern with a pair of C.I or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size Brass/ PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia PVC flush bend, 15mm dia PVCconnection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of E.I.C. |
| 197 | Supplying all materials labour T&P and Fitting and Fixing Rotational moulded polythylene cylindrical vertical water storage tanks conforming to IS12701-1996including cutting hole through the tank and fixing MS tubes and fitting and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting the tank and placing the tank to therequired position including conveyance of all materials to work site payment of royality, taxes etc all complete as per P.H specification and direction of EIC. (including cost of FG over Head Tank)Sintex. (a) 2000ltrs capacity on the roof of 1St Floor |
| 198 | Supplying all materials labour T&P and construction of masonry staging with providing 1st class K.B brick work in cm (1:6) of 0.46mtr height in staging and in circular protection wall to support the tank in the roof of ground flloor using 25mm x12cm x 8cm size K.B bricks having crushing stength not less than 75kg/cm2 12mm thick cement plaster in cm (1:4) over brick work, R.C.C Slab of size 1.64mtr x 1.64mtr x 0.10mtr thick, R.C.C. Beam of size 0.25m x 0.30mand 2.61m average length in C.C (1:1.5:3) using 12mm size H.G Chips including centering and shuttering,bending and biding of rod etc watering, curing, conveyance of all materials to work site,payment of royality, taxes etc all complete as per P.H specification and direction of E.I.C.a) 2000Ltr Capacity on the roof of 1st Floor) |
| 199 | Sinking of 125mmx50mm dia tube well through hand boring method. |
| 200 | Supplying all materials labour T&P and setting up boring equipments including erection of suitable staging for installation of required size of tube well dismantling and removing the same after completion of the work including transportation of boring equipments, cleaning and leveling the site excavation of mud pit channels, etc. all comp as per dir of EIC.Setting for depths from 0 mtr to 100 mtr (3nos) |
| 201 | Supplying all materials labour T&P and transportation of boring pipe, top casing grouting pipe, PVC pipe and fitting pvc well screens, cement bentonite and gdravels etc from sectional store to the site and return of departmental material after use including loading and unloading etc. all complete as per dir of EIC. (3nos) |
| 202 | Supplying all materials labour T&P and drilling pilot bore not less than 102 mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc withdrawing the boring pipes, washing and keeping the bore clear for logging if required all comp as per dir of EIC (3x350mtr) |
| 203 | Supplying all labour Tools and plant and plant and reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing thebore by means of pipe cylinder etc. all complete as per direction of EIC. (i) Reaming from 100mm to 150mm dia, 0.0mtr to 360mtr (3X 60mtr) |
| 204 | (ii) Reaming from 150mm to 200mm dia, 0mtr to 360mtr (3x600mtr) |
| 205 | Supplying all labour, tools and plant and jointing materials and lowering the 300mm dia top casing pipes into the position and removing the same after use all complete as per direction of EIC.(3x6mtr) |
| 206 | Supplying all labour tools and plant and jointing materils and lowering the pvc casing pipes, fittings and well screens in jposition, including fitting and fixing of centraliser cutter plug and washing the bore etc. complete as per the direction of EIC. (i) Lowering 125mm dia pvc casing & Strainer pipe(3X30mtr) |
| 207 | (ii) Lowering 50mm dia pvc casing & Strainer pipe (3x320mtr) |
| 208 | (iii) Cost of 125mm dia 80Sch PVC Pipe (3x30mtr) |
| 209 | (iv) Cost of 50mm dia PVC Pipe (3x310mtr) |
| 210 | (vi) Cost of 50mm dia pvc strainer pipe (3X10mtr) |
| 211 | Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in thebore around the 50mm dia pvc casing pipe etc. all complete as per the direction of EIC excluding the cost of cement. |
| 212 | Supplying all labour, tools and plant and packing the bore with washed dgravel (size P-6) around the pipes in good quality excluding cost of gravel etc. all complete as per the direction of EIC. |
| 213 | b) Labour charges |
| 214 | Supplying all labour tools and plant and grouting with cement slurry for sanitary sealing in the bore around the upper most 3mtr of 125/100mm dia pvc casing pipe properly as per the direction of EIC (excluding the cost of cement) |
| 215 | b) Labour charges |
| 216 | Supplying all labour, tools and plant and materials for cealing and developing the tube well with compressor continously washed till clean and adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour complete in all respect as per the direction of EIC |
| 217 | Supplying all required labour for logging the bore through departmental logging team (till logging team arrives at the site, the contractor is to keep the bore intact by circulating mud through the mud circulating system) and when the logging team arrives at the site, the contractor will withdraw the boring pipe with cutter etc. and keep the bore suitable for logging and supply required labour to carry out the logging operation. |
| 218 | Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyanceas per direction of Engineer-in-charge. |
| 219 | Supplyingall labour, T&P and materials for Construction of Masonary Platform for India Mark-II Hand Pump as per I.S. Specification of 1.85 mtrOutside with Cement Concrete (1:2:4) with 12mm size hard granite C.B. chips etc. all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipe as per direction of Engineer-in-Charge. |
| 220 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 221 | Supplying of ISI Mark 1.00 HP Single Phase Vertical Submersible Pump Set with Discharge of 900-1000 liter/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage. |
| 222 | Supplying all labour, T&P and fitting and fixing of 1.00 HP Single phase vertical Submersible Pump Set with commissioning and testing, Electrificationetc. all complete as per direction of EIC |
| 223 | Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.00 HP Single Phase Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 224 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 225 | Supplying and fitting & fixing of Plastic rope, M.S. Well Cover, M.S. Clamp, Stainless Steel Short piece, Bend & Socket including all const, conveyance and taxes etc. all complete as per direction of engineer-in-charge. |
| 226 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and dir of E.I.C. a)32/40mm dia HDPE Pipe (External) |
| 227 | E.I Works |
| 228 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) |
| 229 | -do- Group A |
| 230 | -do- Group B |
| 231 | -do- Group C |
| 232 | Recessed wiring to Fan Point in... |
| 233 | -do- Group B |
| 234 | -do- Group C |
| 235 | Recessed wiring to Exhaust Fan Point in….. |
| 236 | -do- Group C |
| 237 | S/F of fan hook "S" type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 238 | S/F of Angle holder replacing Ceilling Rose |
| 239 | Swich Boards |
| 240 | S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board |
| 241 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. |
| 242 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
| 243 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 244 | 2 Modular box with base & cover |
| 245 | 4 Modular box with base & cover |
| 246 | 6 Modular box with base & cover |
| 247 | 8 Modular box with base & cover |
| 248 | 12 Modular box with base & cover |
| 249 | Sub-Main |
| 250 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard) |
| 251 | 2x1.5+1x1.5 (1.8.1) |
| 252 | 2x2.5+1x1.5 (1.8.2) |
| 253 | 2x4+1x1.5 (1.8.3) |
| 254 | Circuit Breakers |
| 255 | S/F of "B/C/D" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 256 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) |
| 257 | S/F of MCB 8 way Double door (2.3.6) |
| 258 | Earthing |
| 259 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 260 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 261 | Fittings |
| 262 | Supply, Installation, Testing & Commissioning of exhaust fan upto 300 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43) |
| 263 | S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 264 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-High speed /Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS ) |
| 265 | S/F step type modular fan regulator |
| 266 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval typeincluding necessary connections. ( M-5 ) |
| 267 | Supply & Fixing of 60 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 268 | Panels |
| 269 | Supply & fixing of 63A TPNPanel board 1.63A MCCB (Make- Legrand/Seimens/L&T/C&S/) 2.63A kitkat & bus bar 3. 32A DP MCB- 4 nos 4. 63 A 4P load changeover switch (Legrand/Seimens/L&T/C&S)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
