Delhi Urban Shelter Improvement Board has published Tender For Maintenance Of Office Building. Sub Head : Cleaning, Oiling, Overhauling & Painting Of Desert Coolers Of H.Q. Building, Punarwas Bhawan,C-8 Division And East Zonal Office Seelampur And Kalyanpuri.. Submission Date for this Tender is 18-04-2024. Building Work Tenders in Delhi Delhi. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Overhauling, cleaning, oiling, greasing, painting with approved enameled paint inner side and outer side and water tank, after removing from installed position of Desert Cooler complete with providing and fixing wood wool pads withsuitable size G.I/Steel wire mesh, and re install the same in original position etc as required. (MR) |
2 | S/F of heavy duty submersible pump suitable for sizes upto 24"" desert cooler i/c connection,testing etc. as reqd as approved by Engineer in charge (MR) |
3 | S/F of desert cooler motor kit size suitable upto 18""/20" size with heavy duty copper winding, complete and suitable to operate on 220/240 volts , 50Hz AC supply i/c connection,testing etc as reqd. as approved by Engineer in charge (MR) |
4 | Supply and fixing of Heavy duty GI Desert cooler complete body cooler size of 26" x 26" x 32", i/c tank of size 26 x 26" x 7", made out of 22 SWGG.I. sheet with 24 gauge GI shutter i/c six way direction front grill etc complete as required.as approved by Engineer in charge(MR) |
5 | Supply and fixing of Heavy duty GI Desert cooler complete tank of size 26" x 26" x 7"made out of 22 SWGG.I. sheetetc complete as required as approved by Engineer in charge(MR) |
6 | Supply and fixing of Heavy duty GI complete front grill with six way direction , made out of 22 SWG G.I. sheet suitable for upto 26" Desert cooler etc complete as required as approved by Engineer in charge(MR) |
7 | S/F of desert cooler three leaf aluminium blade suitable for motor kit of desert cooler of upto 24" size complete and suitable to operate on 220/240 volts , 50Hz AC supply i/c dismantling of old damaged blade andconnection,testing etc as reqd as approved by Engineer in charge(MR) |
8 | Providing & fixing 1/2" PVC flexible water pipe in the existing desert cooler complete as reqd. (MR) |
9 | Supply and fixing desert cooler shutter (side parda) made out of 24 gauge G.Isheetsuitable for upto 26" size desert coolercomplete etc. as required as approved by Engineer in charge (MR) |
10 | Providing & fixing of 1/2" PVC elbow and PVC water distributer of cooler sutable for 1/2" PVC pipe in the existing desert coolers complete as reqd.(MR) |
11 | S/f of 4 mfd condenser for Desert coolersuitable to operate on 230 Volt 50HZ single phase AC Supply etc as reqd.(MR) |
12 | S/I/T/C of Desert Cooler 20" (500 mm) fan size desert cooler with size measuring 26"x 26" x 32" of heavy duty GI sheet of 20 gauge, heavy side pannelfitted and with heavy duty cooper winding, three speed, cooler fan motor of ISO certified, MSME, NSIC,ISI Mark with heavy wood wool pads, heavy duty submersible pump and heavy six way metal direction grill with good quality 3 leaf aluminium blade type, moulded plug lead cooper wireetc as reqd, with ISI mark as approved by Engineer in charge ( MR). |
13 | Providing and fixingof 1.5 sq.mm 3 core PVC insulated,FR PVC round sheathed,copper conductor(flexible)industrial cable,1100 volt, conforming to IS suitable to work on 220/240V , 50Hz AC supplyi/c connection, testingetc. as reqd. (MR) |
14 | Providing and fixingof15/16 amp 3 pin plug top heavy duty suitable to work on220/240V , 50Hz AC supply single Phase i/c connection, testingetc. as reqd. (MR) |
15 | S/F M-seal for water leakage in desert cooler water tanks each pkt 25gms Wt. etc as approved by engineer-in-charge.(MR) |
16 | Providing and fixing of stainless steel chain to be wrapped around desert cooler body for safety purpose with dia 5 mm and length of 4 meters etc as reqd |
17 | Providing and Fixing of MS stand suitable for desert cooler of size 26"x26"x36" made with 20mm x 20mm L angle height upto 1.5 mtr provided with 20mm MS strip in all lgs for support and finishing with approved red oxide primer & enameled paint/shade with two coats as reqd |
18 | Rebate on submersible pump |
19 | Rebate on motor kit |
20 | Rebate on desert cooler Body |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail