Military Engineer Services-MES has published Tender For Construction Of Additional Classroom At Air Force School Bani Camp At Air Force Stn Najafgarh Under Ge (Af) Tughlakabad. Submission Date for this Tender is 30-04-2024. Building Work Tenders in Tughlakabad Delhi. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Sch "A" Part-I (Earth Work and Demolition work) |
| 2 | Surface Excavation n exc 30cm deep ad averaging 15cm deep and getting out soft and loose soil. |
| 3 | Excavating in trenches not exc 1.5m wide and not exc 1.50 mdepth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and getting out in any type of soil |
| 4 | Excavating in trenches not exc 1.5m wide and exc 1.50 mdepth, not exc 3.00 mdepth, for foundations, etc, or for shafts, wells, cesspits, manholes, pier holes, etc and not exceeding 10 square meter on plan for manholes etc and getting out in any type of soil |
| 5 | Returning filling in with approved excavated soil including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 6 | Spreading, levelling in layers n.exc. 25cm thick n.exc. 25cm incl. Watering, well ramming with soil obtained from excavation complete all as specified and directed. |
| 7 | Removing excavated soils to a distance not exceeding 50 metres and depositing where directed at a level nexc. 1.5 metre above the starting point complete all as specified and directed. |
| 8 | Excavation in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/loose soil incl returningfilling in ramming earth in layers not exceeding 25cm, and removing surplus excavted soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point and making good surface. |
| 9 | Dismantling of existing chequered tiles on foot path for laying of undergorund cable and re-laying of conditional/ new chequered tiles with suitable PCC work and good surface finishing comple all as specified and directed by Engr-in-Charge. |
| 10 | Sch "A" Part-II (B/R Work) |
| 11 | M&L PCC 1:4:8 type D2 (40mm Graded Aggregate in foundations, filling and mass concrete complete all as specified and directed |
| 12 | M&L RCC M-25 (20 mm graded stone aggr) as in foundations, including rafts,footings,foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concretecomplete all as specified and directed |
| 13 | M&L RCC M-25 (20 mm graded stone aggr) in Columns,pillars, piers, posts and struts complete all as specified and directed |
| 14 | M&L RCC M-25 (20 mm graded stone aggr) in Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and directed |
| 15 | M&L RCC M-25 (20 mm graded stone aggr) inSlabs supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 16 | M&L RCC M-25 (20 mm graded stone aggr)in chajja complete all as specified and directed |
| 17 | M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batterfor rough finished flat surfaces of concrete complete all as specified and directed |
| 18 | M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed |
| 19 | M&L for formwork to faces of sides and soffits of floor or roof beams, cantilevers, shelves including supports, overhangs, etc for fair finished flat surfaces of concrete complete all as specified and directed |
| 20 | M&L for formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work, not exceeding 200 mm thickness (horizontal or sloping) with fair finished surfaces of concrete complete all as specified and directed. |
| 21 | M&L for formworkto chullah hoods, chajjas, troughs and similar items including edges with fair finished surfaces of concrete complete all as specified and directed. |
| 22 | M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed |
| 23 | M&L TMT bars 10 mm dia and over, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spi-rally hooping for columns, hook-ing ends and binding with and including mild steel wire (an-nealed) not less than 0.90mm dia, complete all as specified. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 24 | TMT bars 8 to 10 mm dia in stirrups, spacers and binders, as reinforcement for concrete cut to length, bent to shape required including cranking, bending, spirally hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia, complete. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 25 | M&L bricks works with sub class "B" bricks straight or curved on plan exc 6m mean radius built in (1:6) complete all as specified and directed |
| 26 | M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including wateringcomplete all as specified and directed |
| 27 | M&L for broken stone or boulder hardcore of gauge n exe 63mm deposited, spread and levelled in layersn exe 15cm thick, watered and rammed to a true surface complete all as specified and directed |
| 28 | M &L75 mm thick PCC (1 :4:8) type D2 using 40mmagg as in sub base complete all as specified and directed |
| 29 | M&L 25 mm thick PCC 1:2:4 type B-1, using 25 mm graded stone aggregate as in floors, surfaces finished fair and even complete complete all as specified and directed |
| 30 | M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 31 | M&L for non skid ceramictiles 7 to 8mm thick (square / rectangular ) area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with colouredtiles complete all as specified and directed by Engineer-in-Charge. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 32 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile eexceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 33 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 34 | M&L 10 mm thick rendering in cement mortar 1:4 to stone masonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed. |
| 35 | M&L 450x350x7/350 x 250 x 7mm thick glazed ceramic coloured tiles as in vertical surfaces set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed |
| 36 | M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection/path/pavinglaid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete complete all as specified and directed |
| 37 | M&L rendering 15 mm thick in CM 1:6 on stone masonry surfaces or on other than fair faces of brick masonry finishedfair and even complete all as specified and directed. |
| 38 | M&L 15mm thick rendering in cement mortar 1:4 to fair faces of brick masonaryfinishedeven & smooth complete all as specified and directed. |
| 39 | M&L Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified |
| 40 | M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge |
| 41 | M&L rendering 10 mm thick in CM 1:3as on concerete surface on ceilings finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for preparing newly plastered surfaces and applying applying two coats of distemper with distemper oil emulsion white or tinted over and including one coat of 1mm thick wall care puttycomplete all as specified and directed. |
| 43 | M&L for three coats of white washing on new plaster wall surface over primerincluding preparation of plastered surfaces complete all as specified and directed. |
| 44 | M&L for preparation of newly plastered surfaces & applying threecoatsof white wash on ceilings complete as spd & directed |
| 45 | M&L for PCC (1:2:4) type B-0 using 10/12.5 mm graded stone aggregrate laid over roof slab after applying cement slurry for filling undulationations finished even and smooth without using extra cement complete all as spd and directed. |
| 46 | M&L screed bed or bedding layer of mortar, 15mm thick, in cement mortar 1:4, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid As per manufacturer"s instructions complete all as specified and directed by Engineer-in-Charge. (Note : Water proofing liquid shall be measured and paid separately) |
| 47 | APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm)land on primed surface by forced application complete all as specified |
| 48 | S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fastening and fixing complete FE 290 Gde E-165 complete all as specified and directe. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 49 | S&F 35mm thick factory made IInd Class Hard wood panelled door shutters single panel with lock rail and panel of 9mm B.W.P. marine grade plywood bonded with high quality liquid phenol formaldehyde synthetic resin adhesive conforming to IS-710 or 12mm thick particle board veneered with commercial veneering on both faces. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed by Engineer-in-Charge |
| 50 | S&F Powder coated Anodised aluminium frameand grill for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 51 | S&F Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 52 | Supply and fixing powder coated (thickness of powder coating not less than 60 micron) aluminiumgrill of design DG-104 pattern, including stranded aluminium frame of "F" section of size 23.04x15.3x1.4mm thick all as mafa.cturer"s instructions complete all as specified and directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 53 | S&F 5.5 mm thick Sheet glass, ordinary quality and glazing in Aluminium windowscompleted all as specified and directed. |
| 54 | S&Ffixedgalvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staplesin door and steel windowall as spd and directed |
| 55 | S & F 100 mm size Butt hinges, extruded aluminium alloy with galvanished mild steel hinges pin, anodized & fixed, type B-21 completed all as specified and directed |
| 56 | S&F 150 mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 57 | S&F 150 mm long Aluminium tower blots, stove enamelled black, with bright bolt and fixed complete all as specified and directed |
| 58 | S&F 250 mm long mild steel sliding door bolts plate type stone enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed |
| 59 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed in floor, overall length of cover plate 150 mm, complete all as specified and directed. |
| 60 | M&L for 16 to 18 mm thick Granite (of any tpe) work (tablee rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in cement mortar (1:4) including pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 61 | M &L100 mm thick PCC (1 :4:8) type D2 using 40mmagg as in sub base complete all as specified and directed. |
| 62 | M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and directed. |
| 63 | M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed |
| 64 | M&L Machine Pressed precast concrete interlocking paver block with grey cement and pigment any shapeand size confirming to IS- 15658-2006 of 60 mm thickness M-35 grade complete all as specified and directed |
| 65 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 66 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 Complete all as specified & directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 67 | S&F framed work as in gusset plate for framed truss, rafters, rails braces etc complete, drilling for fixing of steel sheeting or other covering, door etc to be prepared for hanging orsliding with and including either hook and hinges or steel hanging door fitting etc with welded, riveted or bolted of Fe-410 Gde 250A complete all as specified and as directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 68 | M&L Plain Cement Concrete Type C2 1:3:6 using 40 mm graded stone aggrgate as in foundation filling and mass concrete complete all as specified and as directed. |
| 69 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified anddirected |
| 70 | M&L for preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed. |
| 71 | Sch "A" Part-III (E/M Work) |
| 72 | M&L complete for wiring with cable of size 1.5 sqmm single core copper multistrand conductor including continuous earth wire, using cable FRLSinsulated(unsheathed) 1100 volts grade conforming to Is-694 drawn in to and including concealedpvc rigid conduit medium duty with all fittings and fixing accessoriesISI certified IS 9537 part -3 and terminated in to pressed steel metal flushboxes suitable for modular accessories and including modular cover plates with framefor mounting switches, socket regulator, brackets etc andincluding necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement moter 1;3 to the ends or cutting chases for concealed conduit point wiring and making good disturbed surface complete. Cutting not exc 4cm girth and 4cm width for followings:- |
| 73 | one light point controlled by one, one way switch |
| 74 | one fan point controlled by one, one way switch and regulator. |
| 75 | one 3 pin socket out let 5 amps independent |
| 76 | one 5pin 5 amps socket point in same board with other switches. |
| 77 | one 3 pin socket out let 15 amps independent but with cable of size 4.0 sqmm in point wiring and 2.5 sqmm in continuous earth wire . |
| 78 | M & L Complete For modular switch oneway 6 amps 1 modulecomplete all as specified and directed. |
| 79 | M & L Complete For modular switch oneway 16 amps1 modulecomplete all as specified and directed. |
| 80 | M & L Complete for modular socket2 in 1, 5 pin 6 amps 2 modulecomplete all as specified and directed. |
| 81 | M & L Complete for modular socket2 in 1, 6 pin 6A/16 amp 2 module complete all as specified and directed. |
| 82 | M & L complete for ceiling rose surface Bakelite 3 terminalcomplete all as specified and directed. |
| 83 | M & L complete for pvc/ polycarbonate type Lamp holder, insulated body, with back plate for batten fittings complete all as specified and directed. |
| 84 | S & F energy saving LED lamp 12watt, 230 volts 50HZcomplete all as specified and directed. |
| 85 | S & F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with Brushless Direct Current Motor (BLDC) including necessary accessories complete all as specified and directed. Note:- The contractor shall submit original purchase voucher, The engr-in-charge shall deface the voucher and fwd for claiming payment. The non-submission may lead to non-payment. |
| 86 | M & L complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2x06sq mm and 1x6 sq mm as in continuous earth wire drawn in to & including pvc conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement moter 1;3 to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete. Cutting not exc 4cm girth and 4cm widthcomplete all as specified and directed. |
| 87 | M & L complete for sub main wiring with single core copper multi strand conductor FRLS flexible insulated (unsheathed) cable of size 2x04sq mm and 1x4 sq mm as in continuous earth wire drawn in to & including pvc conduit medium 25mm dia ISI marked complete with fittings and fixings accessories laid concealed complete. and including necessary cement work complete all as directed by the Engr in charge including cutting chases pinning in making good to facing and pointing in cement moter 1;3 to the ends or cutting chases for concealed conduit sub main wiring and making good disturbed surface complete. Cutting not exc 4cm girth and 4cm widthcomplete all as specified and directed. |
| 88 | M & L complete for 1x 20 watts ( 4 feet) wall mounted LED batten,extruded aluminium heat sink provided for efficient heat dissipation &integrated electronic driver including lamp complete all as specified and directed by Engr-in-Charge. |
| 89 | M & L complete for 1x 9/10 watts ( 2 feet) wall mounted LED batten,extruded aluminium heat sink provided for efficient heat dissipation &integrated electronic driver including lamp all as specified and directed by Engr-in-Charge. |
| 90 | M & L complete for MCB dist board, sheet steel, phosphatised, powder printed with bus bar, neutral link, earth bar & din railSPN dist board 08 ways double doorcomplete all as specified and directed. |
| 91 | M & L complete for MCB single pole & neutral 240 volts, C curve-10 kA40-60 Ampcomplete all as specified and directed. |
| 92 | M & L complete for MCB single pole 240 volts,C curve-10 kA10 Amp complete all as specified and directed. |
| 93 | M & L complete for MCB single pole 240 volts ,C curve-10 kA 16 Amp complete all as specified and directed. |
| 94 | M & L complete for MCB single pole 240 volts ,C curve-10 kA 40Amp complete all as specified and directed. |
| 95 | Supplying and fixing smart single phase two wire dual source prepaid energy meters BIS 15884 marked in existing meter board / florr panels with pre payment capacity touch keypad based digital having current range 10-60 Amp 240 Volt accuracy class 1.0 alongwith parallel home display split unit with inbuilt load control switch containing provision for TOD and RTC, inbuilt feature to sense the DG mode through PLSI, dual source registration wrt grid as well as DG supply and dynamic load allocation facility from grid and DG, capable to define for tariff slabs, happy hours and holiday definition complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F for single pole and neutral enclouser with a two pin and earth plug and soket complete with one 20 Amp MCBincluding electric connection complete all as specified and as directed. |
| 97 | S & F in replacement of street light panel / feeder pillar box made out off MS/CRCA sheet 3.15 mm thick with MS angle iron frame of size 40 X 40 X 6mm outdoor type front door opening with locking arrangement slanting roof and size of panel /feeder pillar box is 0.6m X 0.45m X 0.35 m without legs including necessary PCC cutting and fixing with PCC 1:3:6 of size 0.3m X0.3m X 0.2m for 04 Nos legs including necessary insulators and 04 Nos of copper bus bar of size 30mmx5mm capacity, provn of inlet and outlet cables with glands and earth connection lead etc complete and connection of all incoming and outgoing cable using aluminium terminal sockets/lugs duly crimpled and necessary two coats of paints with approved colour and grade of first quality synthetic enameled paint over a coat of red oxide primer including necessary preparation of surfaces all as specified and testing complete of the following :- (i) S&F MCCB 4 pole 415 volts 125 Amps 25 KA -01 No (ii) S&F modular indicator lamp LED type -01 set (R,B,Y) (iii) S&F timer switch type Alpharex 3D -21 astro (iv) S&F 63 Amps TP power contractor (v) S&F 32 Amps SPN MCB -01 No (vi) S&F 6-32 Amps SP MCB -02 Nos. (vii) S&F single phase preventer, M |
| 98 | Supply and lay or fixing or passing in replacement through pipe cable XLPE (FRLS) with aluminium conductor with heavy duty stranded 1100volts size of 50 Sqmm 4 Core. Note:- XLPE insulated PVC sheathing (heavy duty) armoured cable with aluminium conductor for working pressure up to and including 1100 volts to IS-7098 (Part-I) for PVC insulated cables with following features (a) Cable shall have fire retarded low smoke (FRLS) compound added to it in the out sheathing as per IEC 754(part-I) IEC-60332 part-2 IFEE 383 ASTM 2x43 and ASTM 2X63 flame retardant compound (PR) as per EIC specification. (b) Inner sheathing shall be of extruded PVC. (c) Heat resisting PVC shall also be added to extrude inner and outer sheathing (d) Cable shall also be supplied with sequences hall marking at every meter as the outer sheathing. (e) Ultra violet radiation resistances compounded comprising ton ASTMG-53. (f) Anti rodent and ant termite compound added (g) PVC compounds of various grades as IS-5831 (h) compaction conductors shall be shaped and arrangement for the same with be on the cable. Note:- (i) Each cable shall be tested for all applicable routine tests as per IS-5831,IS-7098 BS-6746,BS-5467 and IEC 60502 and test reports shall be provided to GE. (ii) Type test as per relevant specification shall produce to GE. |
| 99 | NOTE:- The contractor shall submit the purchase vouchers forItem Nos 86 to 93. The non-Submission of purchase voucher may lead to non-payment and nothing shall be entertained at later stage. All the purchase voucher shall be fwd to office of Accepting Ofiicer duly defaced by Engr-in-Charge. |
| 100 | M&L for sand cushioning in trenches for protection of LT underground cable including watering and consolidation complete all as specified and directed by Engr-in-charge. |
| 101 | Supply and laying well burnt sub class ‘B’ bricks, locally available of size 23x11.5x7.5 CM (+8% tolerance) in trenches for protection of underground cable complete all as specified and directed by Engr-in-Charge. |
| 102 | M&L complete for drilling hole underhard standing /road for laying ofpipe for protection of cable etc by means of manual buckle and without disturbing the top surfaceand making good the disturbed surface if any complete all as specified and directed by Engr-in-Charge. |
| 103 | Supply and laying in replacement of GI tube light grade 80 mm bore complete all as specified and directed by Engr-in-charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
