Military Engineer Services-MES has published Tender For Petty Repairs Works And Repair To Ceiling Chajjas Joinery Flooring Plastering And Allied Works In Certain Bldgs In Tech Area At Af Stn Suratgarh. Submission Date for this Tender is 29-04-2024. Building Work Tenders in suratgarh Rajasthan. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | BOQ (PETTY REPAIRS WORKS AND REPAIR TO CEILING CHAJJAS, JOINERY, FLOORING, PLASTERING AND ALLIED WORKS IN CERTAIN BLDGS IN TECH AREA AT AF STN SURATGARH) |
| 2 | Taking up or down 15mm steel water tubing and connections, including cleaning for refixing or removal to stores, complete all as specified and as directed. |
| 3 | S&F for 15mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and as directed. |
| 4 | Re-fixing steel water tubing of 15mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and as directed. |
| 5 | Taking up or down 20mm steel water tubing and connections, including cleaning for refixing or removal to stores, complete all as specified and as directed. |
| 6 | S&F for 20mm GI tubes medium grade with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified and as directed. |
| 7 | Re-fixing steel water tubing of 20mm bore, with all fittings at new or old position, laid in floor along wall or at ceiling, complete all as specified and as directed. |
| 8 | M&L for cutting chases for concealed water tubing or pinning end etc and making good the facing /cutting in CM 1:3 width exc 10cm but not exc 20cm girth in brick walls etc, complete all as specified and as directed. |
| 9 | S&F in repairs small fittings galvanised iron medium grade such as sockets, elbow , nipple up to size 200 mm , tee etc for 15mm bore pipe including opening the connected pipe and refixing in the same location, complete all as specified and directed. |
| 10 | S&F in repairs small fittings galvanised iron medium grade such as sockets, elbow , nipple up to size 200mm, tee etc for 20mm bore pipe including opening the connected pipe and refixing in the same location, complete all as specified and directed. |
| 11 | S&F in repairs GItank connection nipple 15mm bore 75mm long, complete all as specified and directed. |
| 12 | S&Fin repairsGIunion 15mm bore (with or without replacement), complete all as specified and directed. |
| 13 | S&Fin repairsGItank connection Nipple 20/25 mm bore 75mm long, complete all as specified and directed. |
| 14 | S&Fin repairsGIunion 20mm bore (with or without replacement), complete all as specified and directed. |
| 15 | Dismantling existing water tankof capacity exc 250 and not exc 500 ltrs capacity and removing to store complete all as specified and directed. |
| 16 | Dismantling existing water storage tanks exc 501 litres but not exc 1000 litres capacity by disconnecting existing water connection and removal from site, complete all as specified and as directed. |
| 17 | S&F for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 ltrs, complete all as specified and as directed. |
| 18 | S&F for rotational moulded PVC,triple layered, water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position, with & including all fittings such as GI tank nipple etc. but excluding ball valve, complete all as specified and as directed. |
| 19 | S&F in repairs PVC water storage tank lid cover (Cylindrical) for 500 /1000 ltrs capacity tanks, complete all as specified and directed. |
| 20 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc for 250 to 500 ltrs capacity of tanks, complete all as specified and as directed. Note: Date of cleaning to be written on the tank after cleaning. |
| 21 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc for 501 to 1000 ltrs capacity of tanks, complete all as specified and as directed. Note: Date of cleaning to be written on the tank after cleaning. |
| 22 | S&F in repair door closer hydraulically regulated, design No 3 universal type suitable for door shutter 851 mm to 1000 mm in width and of weight 61kg to 80 kg each cast iron body, complete all as specified and as directed. |
| 23 | M&L for petty repairs to leaking in bib taps, pillar taps, stop cocks, angle valves and low level flushing cistern etc of any description including changing the washer etc, complete all as specified and directed. |
| 24 | Removal of air lock/blockage of water in GI tubing 15 mm/20 mm bore cleaning the pipe or fittings etc and refixing in the same position, complete all as specified and directed |
| 25 | Petty repairs to leakage in by refixing/resecuring in GI/CI pipes etc of any bore, complete all as specified and directed. |
| 26 | M&L in repair CP cast copper alloy bib taps with wall flangetype of 15mm bore quarter turn, complete all as specified and directed. |
| 27 | S&F in repairs 15mm bore of pipe pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms), complete all as specified and directed |
| 28 | S&F for 15mm bore pillar taps cast copper alloy, with capstan head, fancy type, chromium plated, screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and flynuts, screwed for iron pipe, complete all as specified and directed |
| 29 | S&F in replacement of 2-in-1 wall mixer with provision for overhead Shower with 115mm longbend (L bend) pipe on upperside,with built in non return valve connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as specified and directed |
| 30 | S&F in replacement of wash basin mixer, with out popup waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15mmbore pipe, complete all as specified and directed |
| 31 | S&F in repairs 15mm bore Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms), complete all as specified and directed |
| 32 | S&F in replacement of two way bib cock suitable for 15mm bore water pipe, with & including wall flange, made of cast copper alloy, chromium plated fancy type, complete all as specified and directed. |
| 33 | S&F for soap dishchromium plated , complete all as specified and directed. |
| 34 | S&F in repair stainless steel chromium plated curtain rail 25mm dia, with & including fixing brackets, knobs and wall side ,stops, rollers etc, complete all as specified and directed by Engineer –in-Charge. |
| 35 | S&F in repairs brass chromium plated tubular towel rail 20mm dia D type, 600 mm long between flanges, complete all as specified and directed. |
| 36 | S&F in repair CP concealed stop cock fancy type/ angle stop cock screwed both end for iron pipe 15mm bore, complete all as specified and directed. |
| 37 | S&F in repairs CP grating with or without hole 100/125 mm dia round fix on floor/nahani trap, complete all as specified and directed. |
| 38 | S&F in repairs ball valve of 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 210 gms), complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F in repairs PVC in connection 15mm dia 60cm long with 2 Nos PVC check nuts with washer complete all as specified and directed. |
| 40 | S&F in repairs flush pipe of polythylene of low or high density of PVC 32mm dia for low level cistern including all joints, complete all as specified and directed. |
| 41 | S&F in repairs internal assembly syphonic/non syphonic typefor PVC flushing cistern of cap 9/10 Ltr, complete all as specified and directed. |
| 42 | S&Fin repairs PVC handle including lever arm assembly for PVC Low level flushing cistern, completee all as specified and directed. |
| 43 | S&F in repair PVC (SWR) gully trap 125/110mm, setting and jointing with solvent cement, completee all as specified and directed. |
| 44 | S&F in repair 10 litres capacity PVC valveless, syphonicaction type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-Charge. |
| 45 | S&F in repairs plastic water closet seat cover white /colour ,closed pattern with flat bottom end cover and mild steel chromium plated hanging device, complete all as specified and directed. |
| 46 | S&F in replacement of handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, completee all as specified and directed. |
| 47 | S&F in repairs 32mm dia PVC waste pipe flexible typefor WHB or sink 90cm long with union, completee all as specified and directed. |
| 48 | S&F in repairs waste fittings brass chromium plated 32mm dia, complete all as specified and directed. |
| 49 | S&F in repair waste coupling of PTMT (half or full threaded).(Minimum weight 32mm-45 gms), completee all as specified and directed. |
| 50 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, completee all as specified and directed. |
| 51 | S&Fin repair vitreous china squatting pan, "Orissa" pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe),complete all as specified and directed by Engineer-in-Charge. |
| 52 | S&F in replacement of urinal partition of vitreous china white colour of size 310mmx700mm, with and including all fitings and accessories, duly fixed to walls, complete all as specified and directed by Engineer-in-Charge. |
| 53 | S&F for vitreous china wash down water closed pan (Pedestal pattern) white , including connection to drain(or out going pipe) and to flush pipe, antisypthonic(excluding flushing cistern and flush pipe) complete all as specified and directed by Engineer-in-Charge. |
| 54 | S&F in repair vitreous china urinals half stall type white including connection to inlet and out going pipe (waste coupling) complete fixed to walls with steel screwsand PVC rawel plug, waste coupling and and making good the surface by white cement to match the wall shade, complete all as specified and directed. |
| 55 | S&F in repair vitreous china ware wash hand basin white, flat back, size 630mmx 450mm size(flat back or angle back type)including cutting for and pinning ends of brackets or erecting stand, complete all as specified and directed. |
| 56 | S& F in repairs counter wash hand basin vitreous china white oval shape size 440mmX525mmX195mm including waste coupling of 32mm complete making good the surface/joints with white cement complete all as specified and as directed. |
| 57 | Dismantling of CI pipes jointed CM & taking out of branches if required, complete all as specified and directed. |
| 58 | S&F in repair PVC (SWR) waste and vent pipes single sockted in any lenth with rubber ring jointes, laid in trenches/in floors, fixed to walls(bore of pipe 110mm), complete all as specified and directed. |
| 59 | S&F in repair PVC (SWR) waste and vent pipes single sockted in any lenth with rubber ring jointes, laid in trenches / in floors, fixed to walls(bore of pipe 75mm), complete all as specified and directed. |
| 60 | S&F for 75mmbends any radius, diminishing pieces or tapers of any description, complete all as specified and directed. |
| 61 | S&F for 110mm bends any radius, diminishing pieces or tapers of any description, complete all as specified and directed. |
| 62 | S&F in repairs 110mm bore Tee/branch piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed. |
| 63 | S&F in repairs 75mm bore Tee/branch piece single (Equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches, complete all as specified and directed. |
| 64 | M&L for 75mm PVC (SWR) floor trap/nahani trap, plain with grating includingjointing to waste pipe with solvent cement, complete all as specified and directed. |
| 65 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15mm dia pipe. (Minimum weight 60gms), complete all as specified and directed. |
| 66 | S&F in repairs15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe & fixed, complete all as specified and directed. |
| 67 | Resecuring and Repairs to cup boards including easing of CB shutters, tightning of hinges or handles/knobs hasp and staple etc, complete all as specified and directed. |
| 68 | S&F in repairs aluminium handle,150mm size cast type, anodised, ISI marked, complete all as specified and directed. |
| 69 | S&F in repairs aluminium tower bolts, 150mm size cast type, anodised, ISI marked, complete all as specified and directed by Engineer-in-Charge. |
| 70 | S&F in repairs of mild steel barrel tower bolt 200mm long stove enamelled black with bright bolt, complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F in repairs of mild steel sliding door bolt 300mm long stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on stapple plate, complete all as specified and directed by Engineer-in-Charge. |
| 72 | Welding in repairs any situation in any frame butt hinges 100mm medium weight to chowkhat after taking down shutters and refixing in position the same and making functional, complete all as specified and directed by Engineer-in-Charge. |
| 73 | S&F in repairs butt hinges medium weight cold rolled mild steel 100mm long complete all as specified and directed by Engineer-in-Charge. |
| 74 | Welding in repairs any situation in any frame Mild steel body single action door spring hinge size 100 mm including taking down door of any size and refixing in same opening, complete all as specified and directed by Engineer-in-Charge. |
| 75 | Welding in repairs of any description and in any situation exc 6mm but not exc 9mm thickness of weld complete all as specified and directed by Engineer-in-charge. |
| 76 | S&F in repairs Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed by Engineer-in-Charge. |
| 77 | S&F for 100mm size extruded aluminium alloy handles, fabricated type polished, complete all as specified and directed. |
| 78 | S&F in repair aluminiumdoor stopper, complete all as specified and directed by Engineer-in-Charge. |
| 79 | S&F in replacementlooking mirror 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixedwooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed by Engineer-in-Charge. |
| 80 | Demolition of brickwork or stone/boulders masonry built in cement mortar complete all as specified and as directed. |
| 81 | M&L for brick work with sub class "B" bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 completeall as specified and as directed by Engr-in-Charge. |
| 82 | All as per Ser item No 80 here-in-before but except brick, complete all as specified and directed. |
| 83 | Taking down cement plaster on brickor concrete surfaces incl racking out joints hacking for key scrubbing downwith water etc, complete all as specified and directed by Engineer in Charge. |
| 84 | M&L for rendering 5mm thick in CM 1:3 on concrete surfaces on ceiling / facia /RCC Chhaja etc& finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge. |
| 85 | M&L for rendering 12mm thick in CM 1:6 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified & directed by Engr -in-Charge. |
| 86 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and directed by Engr -in-Charge. |
| 87 | M&L for rendering 10mm thick in CM 1:6on fair faces of brick work or concrete surfaces complete all as specified and directed by Engr -in-Charge. |
| 88 | M&L for rendering 15mm thick rough cast plaster, complete all as specified and directed. |
| 89 | M&L for preparation over new plastered surfaces and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns,complete all as specified and directed. |
| 90 | M&L for preparation of oldsurfaces like brooming down or steel wire brushingscraping down smoke soot, moulds mass and efflorescent salt and trading oil and greasy spots and applying two coats of exterior acrylic emulsion (weather proof treatment), in camouflaging patterns, complete all as specified and directed. |
| 91 | M&L for preparation of surfaces and applying three coats of white washing on newly plastered ceilingsurfaces, complete all as specified and directed by Engr -in-Charge. |
| 92 | M&L for complete removal of existing treament through mechanical scraper machine for any type of existingsurface of walls/ceiling, complete all as specified and directed by Engr-in-Charge. |
| 93 | M&L for 1.5mm thick birla/JK wall care putty to receive smooth finishes, complete all as specified and directed. |
| 94 | M&L for painting of treated surfaces to receivetwocoats of dry distemper on surfaces of walls and ceiling, complete all as specified and directed. |
| 95 | M&L for preparation of old decorated surfaces of walls/kerb stone etc and applying one coat of synthetic enamel paint on plastered surfaces,complete all as specified and directed by Engineer in Charge. |
| 96 | M&L for preparation of oldpainting steel surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified and directed by Engr -in-Charge. |
| 97 | M&L for preparation of old painting wooden surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint of approved tint, complete all as specified and directed by Engr -in-Charge. |
| 98 | Hacking out old broken glass (any thickness , size , quality or description) from metal frame including punching or drilling out old glazing pins/spring clipscomplete all as specified and directed by Engr -in-Charge. |
| 99 | S&F for 3mm thick plain sheet glass ordinary quality & glazingwith oil putty in square not exc 0.50sqm in each pane, complete all as specified and directed. |
| 100 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed |
| 101 | S&F for rubber beading for doors of any required size and having a width not exc 30cm, complete all as specified and directed |
| 102 | Resecuring, easing or adjusting without taking down door/windows shutters not exceeding 1 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws, complete all as specified and directed. |
| 103 | Resecuring, easing or adjusting without taking down door/ windows shutters exceeding 1 sqm but not exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws, complete all as specified and directed. |
| 104 | Resecuring, easing or adjusting without taking down door/ windows shutters exceeding 2 sqm for easy operation, tightning hinges, adjusting position of hinges, tower bolts, sliding bolts etc.including provision of necessary screws, complete all as specified and directed. |
| 105 | Dismantling of wall and ceiling or insulation boards/ slabs/PVC panelling any thickness and in any position incl frame grid and cover fillets and framework etc, complete all as specified and directed. |
| 106 | Designer type gypsum ceiling board/mineral fibre board of size595mm x 595mm x 7-8 mm thick as in ceiling, fixed with screws on GI grid frame work of size600mmx600mm,GI T-section of size 25mm x 25mmx1.25mm, GI L-section 25mmx25mmx1.25mm,hangingarrangements with roof with GI wire not less than 4.00mm dia, including applying two coats of distemper oil emulsion (of approve shade) after preparation of surface, including taking down existing ceiling board of any description complete as per manufactures instructions, complete all as specified and directed. |
| 107 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubish of the premises, complete all as specified and directed. |
| 108 | M&L for glazed colour ceramic tiles in vertical surface 300mmx450mm x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 109 | M&L for glazed ceramic coloured tiles of size200mmX300mmX7mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match the shade over, complete all as specified and directed. |
| 110 | M&L for white ceramic non-skid tiles area of tiles exceeding 0.11 sqm but not exceeding 0.18 sqm and7-8 mm thick laid in floors, set and jointed in neat cement to match the shade over, complete all as specified and directed. |
| 111 | S&F for vitrified ceramic tiles light shade 10mm thick( square/rectanguler)polished area of each tile notexc 0.36 sqm in floor etcset and jointed in neat cement slurry and pointed in white or coloured cement to match tiles, complete all as specified and directed. |
| 112 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including demolition of stone slab and tiles of any description or thickness, complete all as specified and directed. |
| 113 | M&L granite tile 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white/coloured cement with admixture of pigment to match the shade of granite store including cutting and polishing etc, complete all as specified and directed |
| 114 | All as per Ser item No 112.00 here-in-before but on dado/skirting, complete all as specified and directed. |
| 115 | M&L for 20mm thickGranite (of any type) work (table rubbed and polished) inplatforms/stair case/ Countertop including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including rounding off/curving the edges of granite stone & polishing, complete all as specified and directed |
| 116 | Complete treating the old surface of granite and kota stone withgrinding rubbing and beeswax polishing, complete all as specified and directed. |
| 117 | M&L for 20mm thick screed bed or bedding layer of mortar CM 1:6 for laying floor finishes complete all as specified and directed by the Engr-in-charge. |
| 118 | M&L for 15mm thick screed bed or bedding layer of mortar CM 1:6 for laying floor finishes complete all as specified and as directed. |
| 119 | M&L for 10mm thick backing for tiles/stones in CM 1:4 on fair faces of brick work or concrete surfaces to recive top layer, complete all as specified and directed. |
| 120 | Attending to repair of broken brick/stone wall and ceiling plastering (area of plaster exc 1.0 sqm but not exc 5.0 sqm in each job)to wall etc in Tech areaof air force station suratgarhdirected by Engieer-in-Charge. Note (i) Any item/material which are required for repair work provided by the contractor like cement,sand, aggregrate and white cement etc shall be deemed to be included in this item only. |
| 121 | M&L machine cut Kota stone 18-20mm thickin patches (each patch area upto1.0 sqm) over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including screed bed or bedding layer of mortar 20 mm thick for laying of floor finishes in CM 1:6, rubbing and polishing, complete all as specified and directed |
| 122 | M&L for in repairs non-skid ceramic coloured tilesin patches (each patch area upto 1.0 sqm) 7mm to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc.laid over and including 15mm tnick cement screed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed |
| 123 | M&L for in repairs glazed ceramic colour tilesin patches (each patch area upto 1.0 sqm) in vertical surface of size 450mmX300mmx7mm thick, over and including 10mm thick cement palster in cm 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed |
| 124 | M&L for in repairs light coloured vitrifiedtiles,in patches (each patch area not exc 1.0 sqm) 8 to 10 mm thick (square/rectangular) jointless , area of each tiles exc 0.36 sqm but not exc 0.42 sqm in floors etc laid over and including 15 mm thick cement screed in CM 1:6, set and jointed, complete all as specified and directed. |
| 125 | S&F in repair chromium plated Overhead rain shower rose in square pattern of size 200mm x200mm with revolving joint and shower armwith wall flange 15mm bore fancy type any colour, complete all as specified and directed. |
| 126 | Easing of windows shutters/CB(one unit shall comprise of one complete window/CB/showcase irrespective of number of leafs) to ensure smooth closing/opening tightning of hinges or changing the postion of hinges adjustments of tower bolts, slidingbolts etc, complete all as specified and directed. |
| 127 | Easing of door shutters (one unit shall comprise of one complete door irrespective of number of leafs) to ensure smooth closing/opening tightning of hinges or changing the postion of hinges adjustments of tower bolts,slidingbolts etc, complete all as specified and directed. |
| 128 | Easing of aluminium door shutters/CB (One unit shall comprise of one complete window/CB/showcase irrespective of number of leafs) to ensure smooth closing/opening tightning of hinges or changing the postion of hinges adjustments of tower bolts, slidingbolts etc, complete all as specified and directed. |
| 129 | Easing of PVC doorshutters/CB to ensure smooth closing/opening tightning of hinges or changing the postion of hinges adjustments of tower bolts including welding to angle iron chowkhats etc, complete all as specified and directed. |
| 130 | Demolition of cement concrete in ground floor and paving not exc15cm thickness(below or above ground level) and rubbish off the premises, complete all as specified and directed |
| 131 | M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement including forming necessary joints 12mm wide to the full depth of PCC at every 3 meters and every cahnge 0f direction and filling the same with &including bitumen and sand 1:3 by weight complete with including necessary form work etc, complete all as speified and directed. |
| 132 | M&L for 75mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in top surface of Hard standing/path etc, finished the surface even and smooth without using extra cement, complete all as specified and directed. |
| 133 | Dismantling of paverblock/tiles of any description or thicness in floors, aprons etc laid dry pointing, complete all as specified and directed by Engr-In-Charge |
| 134 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base floor, complete all as specified and directed. |
| 135 | M&L for factory made machine pressed precast concrete interlocking paver block any shape or size confirmimg to IS 15658 of 80 mm thickness M-40 grade with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed |
| 136 | Fixing only retrived machine pressed precast concrete interlocking paver block/tiles any shape or size with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling upto full depth with fine tibba sand, complete all as specified and directed. |
| 137 | M&L for factory made machine pressed precast concrete interlocking paver block any shape or size confirmimg to IS 15658 of 80mm thickness M-35 grade with grey cement and no pigment laid over and including 25mm thick sand cushioning and filling the joints upto full depth with fine tibba sand, complete all as specified and directed |
| 138 | Dismantling palin or corrugated asbestos cement sheeting, any thickness as in roof covering or wall cladding, complete all as specified and directed. |
| 139 | S&F pre-painted galvalume aluminium zic coating GIbase corrugated steel sheet 0,50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 140 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed |
| 141 | S&F for mild steel plates, plain or chequered, in 5mm thick over in thickness in available size, Fe 410-W(Gde E-250) quality, complete all as specified and directed. |
| 142 | S&F for steel work in tubular truss including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240, complete all as specified and directed. |
| 143 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and as directed. |
| 144 | M&L for 25mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate)as in floor finished surfaces fair and even to receive tile, complete all as specified and directed. |
| 145 | M&L for 75mm thick PCC 1:3:6 type C2 (using 40mm grade stone aggregate)as in plinth protection / paving finished fair and even without using extra cement, complete all as specified and directed. |
| 146 | Demolition of RCC of any description in any position not otherwise specially provided for (reinforcement cut as required to facilitate demolition), complete all as specified and directed. |
| 147 | M&L for providing reinforcement cement concrete 1:2:4 (using 20mm graded stoneaggregate) as inslabs/ beams/column stair casein floors balconies,canopies, desc slabs and the shelves and the like, complete all as specified and directed. |
| 148 | M&L for RCC chajjas1:2:4 type B0 (using 12.5mm graded stone aggregate) as in approved design, complete all as specified and directed. |
| 149 | Use and waste of formwork to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exc 200mm thick (Horizontal or sloping) flatin fair finishedsurfaces of concrete, complete all as specified and directed. |
| 150 | Use and waste of formwork to cornices and mouldings of any shape in cross section and any girth in fair finishedsurfaces of concrete, complete all as specified and directed. |
| 151 | Use and waste of formwork to edges of concrete flats, treads breaks in floor, window cills, concrete railing, openings in concrete walls, floor and roofs and similar works exc 5cm but not exc 10cm wide rough finish surface of concrete, complete all as specified and directed. |
| 152 | Use and waste of formwork toedge of concrete flats, breaks in floors, opening in concrete walls,floors and roofs and side of RCC/PCC bands in walls ad similar works not exc 20cm thick, complete all as specified and directed. |
| 153 | S&F for mild steel TMT bars 10mm dia and over, cut to length, bent to shape requred, including crancingbending and binding with mild steel (anneal) wire not less than 0.90mm dia, complete all as specified and directed. |
| 154 | S&F for mild steel TMT bars8mmdia , cut to length, bent to shape requred, including crancingbending and binding with mild steel (anneal) wire not less than 0.90mm dia, complete all as specified and directed. |
| 155 | Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but not exc 4.00 sqm each, complete all as specified and directed. |
| 156 | Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 sqm each, complete all as specified and directed. |
| 157 | Taking downshutters of any description but exc 1.00 sqm and not exc 2.00 sqm each and refixing in same opening, complete all as specified and directed. |
| 158 | Taking down chowkats or frames exc 1.5 sqm but not exc 4.00 sqm each, complete all as specified and directed. |
| 159 | S&Fpressed steel frames for doors with one or more related incl. necessary fixing lugs, hinges look strike plate etc. complete as specified size of frame105mmx60 mm, complete all as specified and directed. |
| 160 | S&F for pressed steel frames for doors with one or more rebated incl. necessary fixing lugs, hingesstrike plate etc. complete as specified size of frame 125mmX60mm, complete all as specified and directed. |
| 161 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in hold fast iron fixing and back filing of pressed steel door frameincluding necessary form work, complete all as specified and directed. |
| 162 | S&F for framed work of rolled mild steel conforming toFe-290 (GdeE165)as in doors or gates of angle or other section with gusset plates, rails, braces, etc, drilled for fixing of steel sheeting or other covering; doors etc to be prepared for hanging or sliding with and including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting, running rails & guides) and hanging, fastening & fixing, complete all as specified and directed. |
| 163 | S&F for 35mm thick 2nd class Hard wood plain framed Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 164 | S&F for 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats, complete all as specified and directed. |
| 165 | S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 166 | S&F for 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles not exc 200 Cu.cm each in 2nd class Hard Wood, complete all as specified and directed. |
| 167 | M&L for preparation of new surface and applying two coats of synthetic enamel painting to wood and wood based surfaces of any description, not otherwise described over 10cm width or girth over one coat of pink primer, complete all as specified and directed. |
| 168 | S&F for steel window with side hung shutter including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and directed. |
| 169 | S&F for steel ventilator with top hung shutter including hinges with steel peg stay, complete without glazing bars, complete all as specified and directed. |
| 170 | M&L for preparation of new steel surfaces and applying two coats of synthetic enemel painting to iron and steel surfacesof any description over a coat of red oxide not otherwise described over 10cm width or girth, complete all as specified and directed. |
| 171 | Repair existing aluminium door and window shutters with/without taking down shutter from frame, opening out joints, taking out glass or panels of any description, replacing the corner piece wherever required, joining and assembling again, refixing the glass pane and panels by provision of new rubber neoprene packing, complete all as specified and directed. |
| 172 | S&F for powder coating aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and directed. |
| 173 | S&F for powder coating aluminium (minimum thickness of powder coating 50 micron) door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and directed. |
| 174 | S&F for powder coating aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.), locking arrangement, complete all as specified and directed. |
| 175 | M&L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, complete all as specified and directed. |
| 176 | S&F for aluminium chequered grillsas on aluminium windows,weight not exc .0.50 kg/sqm and fixed including taking down of old unservicable grill, complete all as specified and directed. |
| 177 | M&L for 12mm thick both sides prelaminated Particle board, medium density, fixed with screws to frame work in cup board shutters, partitions, shelves, complete all as specified and directed. |
| 178 | S&F for 4.8mm thick sheet glass, ordinary quality and in square exc 0.5 sqm in each pane in any position, complete all as specified and directed. |
| 179 | S&F for solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers not exc 1.5 sqm, complete all as specified and directed. |
| 180 | S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm thickPVC sheetreinforced with mild steel square tube, complete all as specified and directed. |
| 181 | S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and directed. |
| 182 | Contract Amount shall be derived after deducting the amount of Schedule of Credit in General Summary on serial page No 17 of tender documents. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
