Tender For Construction Of 100 Seated Ladies Hostel(G Plus 2) With Terrace At Govt. Polytechnic Angul For The Year 2023-24, Angul-Odisha

TDR : 43115511

Tender Notice
BOQ

Expired

Angul , Odisha

Tender Brief : Tender For Construction Of 100 Seated Ladies Hostel(G Plus 2) With Terrace At Govt. Polytechnic Angul For The Year 2023-24

Document Fees
₹ 10000 /-

EMD
₹ 589000.0 /-

Tender Value
₹ 5.88 Crore /-

Submission Date
07-06-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil Work :- Clearing and grubbingland including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth upto 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned upto a lead of 1000metres including removal and disposal of top organic soil not exceeding 150mm in thickness as per Clause 201 of MoRT&H Specifications for Road & Bridge works Latest Revision & including cost of all labour, T&P, royalty etc complete and as per direction of Engineer-in-Charge.
2	Dismantling brick or stone masonary in lime & cement mortar including stacking the useful material for reuse and removing the debris within 50 m leadincluding cost of all labours, T & P, sundries etc. as required for the work complete as per the direction of the Engineer-in-charge.
3	Dismantling and removing R.C.C columns, beams, slab, staircase, landing, lintels including stacking the useful material for reuse and removing the debris within 50 m lead. including cost of all labours, T & P, sundries etc. as required for the work complete as per the direction of the Engineer-in-charge.
4	Earth workexcavation in foundation trenches in hard soil including dressing and leveling the bed up to required depth and depositing the excavated materials at places away from work site within 50mtr initial lead and 1.5mtr initial lifts T&P shoring shuttering dewatering if required etc. complete as per direction of the Engineer-in-charge.
5	Up to 1.5Mtr Depth
6	Beyond 1.5Mtr to 3.00Mtr Depth
7	Construction of embankment with approvedmaterials obtained from borrow pits with all leads and lifts transporting to site,spreading, grading to required slope and compacting at OMC by Vibratory Roller to meet the requirement of Table-300.2 as per approved drawing and technical specifications complete in all respect as per Section 900 and Clause 305 of MoRT&H Specifications for Road & Bridge works(latest Revision) & including cost & conveyance of all materials, labour, T&P, royalty etc. complete and as per direction ofEngineer-in-charge.
8	Disposal ofsurplus/ excavated materials by mechanical means within 5km. Lead away from the site including cost of all labour , T&P complete as perthe direction of the Engineer-in-charge.
9	Providing Pre Anti termite treatement of best quality including basic cost, conveyanceof all materials, cost of all labour, T&P required for the work etc. including labour cesscomplete as per direction of the Engineer-in-charge
10	Supplying filling in foundation and plinth with sand in layers not exceeding 150mm thick including watering, ramming including cost, conveyance, royalty and taxes of all materials, all labour T&P required for the work etc. complete (measurement will be taken on finished compacted section only).
11	Cement concrete of propertion (1:3:6) in foundation and floors using 40mm nominal size clean hard black cursher broken granite metal of approved quality from approved quarry including lowering laying concrete in layers not exceeding 15cm thick to the required level ramming watering curing centering & shuttering etc. complete including cost conveyance royalty taxes of all materials and alllabour T&P required for the work etc. complete as per direction of the Engineer-in-charge.
12	RCC work of M-25 in all floors having a minimum compressive strength ( in work test) 250kg/cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 using 10mm size to 20mm size black hard crusher broken granite stone chips (10mm size 40% & 20mm size 60%) of approved quality & from approved quarry including hoisting lowering laying and compacting concrete with centering & shuttering and finishing the exposed surface smooth providinggrooves or beads where necessary and providing required No. of fan hooks as required including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of MS rod / Tor steel and binding wire and labour charges for bending binding and tying the grills.(In all Floors)
13	A) Column base & footing
14	B) Plinth beam
15	C) Column & Roof Beam
16	Ground Floor
17	1st Floor
18	2nd Floor
19	3rd Floor
20	D) Lintel Band
21	i) Ground Floor
22	1st Floor
23	2nd Floor
24	3rd Floor
25	F) Roof slab
26	i) Ground Floor
27	1st Floor
28	2nd Floor
29	3rd Floor
30	G) Stair case
31	i) Ground Floor
32	1st Floor
33	2nd Floor
34	G) Chajja
35	i) Ground Floor
36	1st Floor
37	2nd Floor
38	H) Fins
39	i) Ground Floor
40	1st Floor
41	2nd Floor
42	Labour charges for straightening the coiled or bend up M.S. rod / HYSD bars confirming to Gr.Fe-500, cutting bending binding lapping placing welding etc. (Confirming to ISI specification) and jointing if necessary by lapping and tying the grills and placing in position as required for RCC work as per approved design hoisting lowering and laying in position including cost conveyance & taxes of M.S. rod / tor steel(Primary Producer like- SAIL/RINL/TATA/ JINDALSTEEL/ SHYAM STEEL) make) and binding wire of 18 to 20 gauge (as approved by the deptt.) weight of over lapping, couping, welded joints, spacer bar, chair, stage, hanger andbinding wires shall not be considered for payment at all. Standard co-efficient of different size of the steel shall be considered. Welding & lapping should be confirming to relevant clause of IRC 1987 in all floors.Ground Floor
43	Ground Floor
44	1st Floor
45	2nd Floor
46	3rd Floor
47	Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in Foundation & Plinth including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work.
48	Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:6) after immersing the bricks for six hours in water before use in superstructure including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors.
49	i) Ground Floor
50	1st Floor
51	2nd Floor
52	3rd Floor
53	Fly Ash brick masonary using Fly Ash brick having crushing strength not less than 75kg/cm2 in cement mortar of (1:4) after immersing the bricks for six hours in water before use in superstructurewith provisions for 2 nos 6mm dia MS bar at each 4th layer after immersing the bricks for minimum 6 hours in water before use,including splays cutting circular moulding corbelling champhering and similar such type of work watering and curing including cost conveyance royalty taxes of all materials and cost of all labour with T&P required for the work in all floors.
54	i) Ground Floor
55	1st Floor
56	2nd Floor
57	Providing 12mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
58	i) Ground Floor
59	1st Floor
60	2nd Floor
61	3rd Floor
62	Providing 16mm thick cement plaster in cement mortar (1:6)finished smooth to brick walls after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.
63	i) Ground Floor
64	1st Floor
65	2nd Floor
66	3rd Floor
67	Providing 6mm thick cement plaster in cement mortar (1:4)finished smooth to RCC work after racking out joints, scrapping & cleaning the surface & finishing the plaster surface smooth using wooden float only to proper plumbs & level and making necessary grooves, beads & drip course to give required ornamental finish as per drawing, watering, curing, scaffolding, screening sand etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.Ground Floor
68	i) Ground Floor
69	1st Floor
70	2nd Floor
71	3rd Floor
72	Providing 25 mm thick Grading Concrete (1:2:2) using10mm to 6mm size chips finished smooth on roof slab etc. complete with cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P, sundries required for the work etc. complete as per specification & direction of Engineer-in-charge.(Ground floors)
73	2nd Floor
74	3rd Floor
75	Providing & installing two component acrylic modified cementitious waterproofing coating with masterseal 551/ Equivalent over roof slab after carrying out pond test on roof slab, filling all defects, saturating the surface, mixing the products and then application in 2.0 mm thickness (1.8 kg/sqm coverage rate for 1.0 mm thickness) in suitable layers complete in all respect, all materials, tools, plant & labour complete in all respect as per direction of the Engineer -in-charge.
76	Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make in floors on 20mm thick bed of cement mortar (1:4) and filling the joint with white cement mixed with pigment to match the shades of the tile including cost of all materials, taxes, labour, labour cess T&P erc. required for the work complete in all respect as per direction of the Engineer-in-charge.
77	i) Ground Floor
78	1st Floor
79	2nd Floor
80	Supplying, fitting, fixing of Vitrified Tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mmx600mm Colour/printed series of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm cement plaster (1:3)jointed with white neat cement slurry mixed with pigment to match the shades of the tile including rubbing and polishing etc.complete with cost, conveyance, royalities and taxes of all materials labour, labour cess complete in all respect.
81	i) Ground Floor
82	1st Floor
83	2nd Floor
84	Supplying, fitting, fixing of 20 mm thick Granite Tilesin floors, treads, steps and landing slab on 20mm thick bed of cement mortar (1:4) joined with neat cement slurry mixed with pigments to match the shades of the tiles including polishing the surface with cost, conveyance, royality and all taxes of all materials etc. complete as per direction of the Engineer-in-charge.
85	i) Ground Floor
86	1st Floor
87	2nd Floor
88	Supplying, fitting & fixing of 35mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality with frame of 1st class hard wood including cost of all door fittings and fixtures,conveyance of all materials labour and T&P require for the work etc.compolete as directed by Engineer-in-charge.
89	Supplying fitting and fixing of two track UPVC sliding window / ventilator of approved make with 6mm thick glass of approved quality complete with frame, shutter and all fitting and fixtures etc. complete as per specification & direction of Engineer-in-charge.
90	Supplying fixing and fittings MS window grills, Doors, MS verandha grills and MS grill gate of approved design and drawing made out of MS flat and MS angle at work site with one coat of anticorrosive red oxide zink chrome primer including cutting holes in brick or RCC walls and fixing with CC (1:3:6) including cost conveyance royalty and taxes of all materials all labour T&P required for the work complete (payment will be made on weight basis only)
91	Grill
92	Providing, Fitting & Fixing of Stainless steel of 304 grade in hand Railing of 50mm outer diameter of 2mm thick of approved Quality & Specification with balustrade of size 32mmX32mmX2mm square pipes in rows including Cost,conveyance of all Materials, Labour ,T&P required for fabrication, buffing & polishing, cost of all fixtures etc. complete and as per specification & direction of Engineer-in-charge (In all floors)
93	Painting two coats with synthetic enamel paints over a coat of primer including cleaning the surface with sand papering and using paints of approvedquality and approved shade including cost conveyance taxes of all materials all labourT&P etc. complete as directed by the Engineer in charge.
94	i) Ground Floor
95	1st Floor
96	2nd Floor
97	Painting 2 coats with Plastic Emulsion paints over a coat of primer and putty of approved shade by means of brush to inside surface of walls after cleaning the surface etc. complete in all floors including cost of all materials with all taxes and cost of all labour with T&P required for the work etc. complete in all respect as directed by Engineer – in – Charge.
98	i) Ground Floor
99	1st Floor
100	2nd Floor
101	3rd Floor
102	Painting two coats with weather coat paintof approved shade over a coat of primer by means of brush to outside surface of walls complete in all floors with cost, carriage and all taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect as per direction of the Engineer – in – Charge.
103	i) Ground Floor
104	1st Floor
105	2nd Floor
106	3rd Floor
107	P.H Works:- Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge.
108	20mm dia C - PVC pipe
109	Ground Floor
110	First Floor
111	Second Floor
112	25mm dia C - PVC pipe
113	Ground Floor
114	First Floor
115	Second Floor
116	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor GI/PVC pipes, class-IV (10 k.g. F/cm) on firming I.S.4985 of the following nominal bore, tube fittings and clamps including making good the wall, ceiling and floor, testing all complete as per specification and direction of the Engineer in charge.
117	32mm dia PVC ASTM pipe (sch-80)(top floor)
118	40mm dia PVC ASTM pipe (sch-80)(top floor)
119	Supplying all materials, labour T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all joiniting materialsincluding cost & conveyance of all materials to worksite, payment oftaxes etc. allcomplete as per P.H specification and direction of the Engineer-in-charge.
120	15mm dia CP angle stop cock (Con-CHR-053KN Jaquar make)
121	15mm dia CP two in one bib cock (Con-CHR-041KN Jaquar make)
122	15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
123	15mm dia CP Long Body Bib cock (Con-CHR-107KN Jaquar make)
124	15mm dia CP Pillar cock (Con-CHR-011KN Jaquar make)
125	20mm dia CP consealed stop cock(Con-CHR-083KN Jaquar make)
126	25mm dia brassfull way valve (Shakti make)
127	32mm dia brassfull way valve (Shakti make)
128	40mm dia brassfull way valve (Shakti make)
129	15mm dia CP Health faucet (Con-ALD-MCH-573 Jaquar make)
130	15mm CP Extension piece
131	125mm CP grating
132	15mm size C.P. flange
133	Supplying all materials , labour, T&P and fixing rotational mouldedpolyethylene cylindrical vertical water storage tanks conforming to IS:12701/1996 including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 5.40 mtr. lengthx0.25 mtr widthKBbrickwork in cement mortar (1:6) of 0.46m height in staging and 0.13mtr thick circular protection wall of 0.46mtr height to support the tank,12mm thick cement plaster in cement mortar (1:6) over brick work, RCC slab of size 1.60mX1.60m and 0.10m thick ,RCC beam of 0.25mx0.30m and 3.40m average length in cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips and required steel reinforcement including centering and shuttering,watering,curing ,cost of all materials,conveyance of all materials to worksite , payment of royalty, all taxesetc.all complete as per approved drawing , P.H. specification and direction ofEngineer-in-charge
134	2000 liters capacityPVC water storage tank roof of 2nd Floor
135	supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking G.I. Pipes and fittings/ P.V.C. pipes and fittings including watering, curing, cost & conveyance of all materials to worksite,payment of royality, taxes etc. all complete as perdirection ofEngineer-in-charge.
136	Ground Floor
137	First Floor
138	Second Floor
139	Supplying all materials , labour, T&P and cutting holes in RCC floors and roofs upto 19cm thick for passing P.V.C pipes and G.I fittings etc. , and repairing the holes after insertion of pipe etc. with cement concrete (1:2:4) including finishing complete so as to make it leak-proofas per P.H. specification and direction of Engineer-in-charge
140	Ground Floor
141	First Floor
142	Second Floor
143	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damagesincluding watering ,curing , cost & conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the Engineer-in-charge.
144	Ground Floor
145	First Floor
146	Second Floor
147	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment oftaxes etc.all complete as per P.H specification and direction of the Engineer-in-charge.
148	110mm U-PVC SWR Pipe (Supreme /Ashirvad)
149	110mm U-PVC‘P’ Trap(Ori Plast/Finolex/Supreme Make)
150	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
151	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
152	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
153	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
154	110mm U-PVC S/Jn door(Ori Plast/Finolex/Supreme Make)
155	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
156	110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
157	110mm U-PVC Door tee(Ori Plast/Finolex/Supreme Make)
158	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
159	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
160	580mm size Orissa pan (Hindware/Parryware/Neycer make)
161	Supplying all materials, labour T&P and and fixing 12.50 liters/10 liters capacity low level flushing cistern with a pair of cast iron or M.S. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle,unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia CP long flush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connceting the inlet pipe with suupply main , cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
162	10 ltr. Capacity pvc L.L. cistern with 32mm. Dia CP long flush bend ( Slimline-white-Parryware make )
163	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI \"p\" or \"s\" trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
164	580mm size Orissa pan (Hindware/Parryware/Neycer make)
165	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral \"p\" or \"s\" trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge
166	European water closet with \"p\" trap plain(Hindware/Parryware/Neycer make)
167	One piece commod(Hindware)ELEMENT Cat No.92084.
168	Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with cast iron or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered \"Hot\" and \"Cold\" with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, cost & conveyance of all materials to worksite, payment oftaxes etc. all complete as perP.H specification and direction of the Engineer-in-charge
169	Halfpedestalbasin(560x450)Hindware No.91049+91115
170	Under Counterbasin(560x450)Hindware-No.10095
171	550mmx400mm W.H.basin (Hindware/Parryware/Neycer make)with 15mm dia C.P.pillar cock (Plaza make) with 22” x 16” pedestal
172	Supplying all materials, labour, T&P for fitting & fixing plain edge kitchen/wall sink of all standard sizes with a pair of bracket, C.P. waste, trap & P.V.C. waste pipe & painting brackets including supply of cement concrete & mortar etc. all complete. 24” x 18” x 10” sink
173	Supplying all materials, labour, T&P and fixing standard sized CP towel rail complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
174	25mmx600mm long CP towel rail
175	Towel ring
176	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm.thick A.C. sheet or ply wood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of Engineer in charge.
177	600mmx450mm size B.E mirror (swivelled type)
178	Large Size mirror with Frame (27x0.90x0.75)= 18.23
179	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charge
180	CP soap holder
181	Supplying all materials labor T&P & Fitting & fixing CP shower with rim with supply of red lead and yarn nail complete as per direction of Engineer in charge.
182	½” x 5” CP Shower (Plaza Deluxe Make)
183	Supplying all materials , labour, T&P and cutting holes through existing brickor laterite masonry wall for takingU-PVC pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
184	Supplying all materials , labour, T&P and cutting of RCC chajja for taking HCI or U-PVC pipe and fittings including making good the damages etc. all complete as per P.H. specification and direction of Engineer-in-charge
185	Supplying all materials ,labour ,T&P and constructing Inspection Chamber ofinside size 760mmx760mmx460mmwith cement concrete (1:3:6) using 40mm size crusher broken hard black granite metal on bed , KB brick work in cement mortar (1:6) in foundation and plinth, moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size crusher broken hard black granite chips,12mm thick cement plaster (1:3)with cement punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab (1:2:4) using 12mm size crusher broken hard black granite chips with R.C.C man hole cover, earth work in excavation in all kinds of soil and refilling the cavity around the chamber including watering,curing,cost of all materials, conveyance of all materials to worksite, payment of royalty,all taxesetc.all complete as perapproved drawing, P.H specification and direction of Engineer-in-charge
186	Inside size 76cmx76cmx46cm with 18” dia RCC MH cover
187	Supplying all materials ,labour ,T&P and constructing gully trap chamber ofinside size 250mmx250mmwith 8cm thick RCC precast cover slab in cement concrete (1:2:4) mix using 12mm size crusher broken HG chips, foundation concrete (1:4:8) using 40mm size crusher broken HG metal on bed and around trap, KB brick work in cement mortar (1:6) in foundation and plinthand inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap, 150mmX150mm size CI gratingetc.all complete as per drawing,specification and direction of Engineer-in-charge
188	Supplying all materials labour T&P filling sand in lavatories well watered and rammed including lead of materials to work site.
189	Supplying all materials, labour, T&P and providing cement concrete ( 1:4:8 ) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
190	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
191	Ground Floor
192	First Floor
193	Second Floor
194	Providing & applying water proofing treatment (Two Component glass fibre reinforced specially formulated acrylic modified, cementitious elastic coating system) using Sika Top Seal 109 hi & Sika Fab-1 or equivalent (glass fibre cloth) @ 3Kg/Sq.mtr before one coat of Sika Top Seal 109 hi or equivalent Primer @ 200 gm/Sq.mtr over the cleaned RCC Horizontal Surface & Outer retaining wall etc including the cost of all materials, cost of labour, conveyance, taxes, T&P, etc. all complete as per the direction of Engineer-in-Charge.
195	First Floor
196	Second Floor
197	Supplying all materials, labour, T&P and providing and fixing Vitrified tiles in floors, treads or steps and landing on 25mm thick bed of cement mortar (1:1) ( 1 cement : 1 sand ) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge ( ceramic floor tiles of premium grade having thickness 7mm to 8mm conforming to IS 13755 of size Kajaria/Somany/Johnson tile 60cmx60cm special printed seriesto be pre-approved by the Engineer-in-charge )
198	Kajaria/Somany/Johnson tile 60cmx60cm
199	Ground Floor
200	First Floor
201	Second Floor
202	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
203	Ground Floor
204	First Floor
205	Second Floor
206	Supplying all materials, labour, T&P and providing and fixing porcelain glazed tiles in dado skirtingon 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tilesincludingwatering, curing,cost of all materials, conveyance of all materials to work site , payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge( ceramic wall tiles of premium grade having thickness 6.5mm to 6.7mm conforming to IS 13753 of size Kajaria/Somany/Johnson tile 60cmx30cm special plain / printed series to be pre-approved by the Engineer-in-charge )
207	Kajaria/Somany/Johnson tile 60cmx30cm
208	Ground Floor
209	First Floor
210	Second Floor
211	Granite Tiles 10mm Thick
212	Ground Floor
213	First Floor
214	Second Floor
215	Factory made single leaf Solid WPC (Wood polymer) composite door shutter of 25mm thickcompacted with wood grain finishstructural foam panel of 29mm thickness and a density of 650kg/cu.mtr shall be used as core material for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material,The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters Conforming to relevant I.S.specification. The finish of door shutter will be plain colour white/ Ivory/ Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. of make Rajshri Plastiwood/ Alstone/Aramstrong or euivalant as per direction of Engineer-in-charge.
216	Factory made Solid WPC door frame of size 90mmx45mm fabricated .The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The WPC frame shall be provided with The material and process for manufacturing the door frames shall conform to Relavent I.S.specification. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification. of make Rajshri Plastiwood/ Alstone/ Aramstrong or euivalant as per direction of Engineer-in-charge.
217	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 80 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 80 liter\"s along with 2 noa of faucets 1 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge
218	Aqua guard pure Chill 80 PSS UV
219	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized P.V.C. pipe conforming to IS 4985/2000 of the following out side dia for class- 3 (0.60mpa ) including jointing with supply of approved solvent cement by non-heat application method/as per manufacture\"s specification, provoding and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per P.H. specification and direction of the Engineer in charge
220	100mm dia P.V.C. pipe
221	150mm dia P.V.C. pipe
222	Supplying all materials labor T&P and constructing MH chamber of sizes earth work in excavation in all kinds of soil CC(1:1:8) with black granite chips size 46mm brick work with K.B. brick having crossing strength not less than 75 Kg /CM2 to 90 Kg/CM2s in CM(1:6)12mm C.P(1:8) inside MH chamber over benching with cement slush pointing (1:3)outside the MH chamber providing painting MS or CI step iron RCC(roof of slab with CC(1:2:4)with black granite chips size 12mm bending binding tying the grills placing of the reinforcement providing RCC color of required size refilling the cavity around the MH chamber with excavated earth including channeling the bed of MH etc all complete as per PH specification.
223	MH size 0.91m x 0.91 m with 0.45 m (18” dia RCC Cover )
224	Supplying all materials labour T&P and constructing 1.80m dia x 2.60 m deep soak way pit with dry brick having crossing strength not less than 75Kg/CM2 to 99Kg/CM2 in CM(1:6) for the remaining 0.4572mm height of wall at top CC(1:3)inside and outside inside fill with dry brick khoa size 38mm ,CM thick RCC perforated slab to a height of 1.9012m from bottom covered by means of 50mmthick RCC wall cover in pieces filled with iron plugs including earth work in excavation refilling of cavity around the pit and painting the iron works complete as per PHD design and specification including carriage of all materials to site.
225	2 Nos 100 Users R.C.C.Septic tank
226	Earth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of theEngineer-in-Charge.
227	Supplying all materials,labour ,T&P and filling in foundation and plinth with sand well watered and rammed including cost, conveyance of all materials to work site ,payment of royalty,taxes etc. all complete as per direction of the Engineer-in -charge
228	In ground floor
229	Supplying all materials, labour, T&P andproviding cement concrete ( 1:3:6) with 4cm size crusher broken hard granite metal including watering, curing, cost of all materials,conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge.
230	In ground floor
231	Supplying all materials, labour, T&P and providing cement concrete ( 1:2:4 ) with 12mm size crusher broken hard black granite chips including watering, curing,cost of all materials, conveyance of all materials to work site with payment of royalty, all taxes etc all complete as per P.W.D specification and direction of Engineer-in-charge
232	In ground floor
233	Supplying all materials, labour, T&P and providing cement concrete (1:1:5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
234	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
235	Supplying all materials, labour, T&P and providing M.Sreinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
236	In ground floor
237	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:4) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
238	In ground floor
239	Supplying all materials,labour,T&P and providing 12mm CP (1:4) with cement punning on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
240	Supplying all materials, labour, T&P and providing,fitting and fixing 150mm x 150mm x 150mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification anddirection of the Engineer in charge
241	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls ofman hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
242	1 no 50,000ltr R.C.C. Sump
243	Earth work in excavation of foundation in all kinds of soil with in 1.5m initial lift including dressing and leveling of bed and breaking the clods and the excavated materials with in 50m initial lead as per direction of Engineer in charge.
244	-do- with Ist additional depth of 1.50 m over the initial lead and lift
245	Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer incharge.
246	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
247	Supplying all materials, labour, T&P and providing cement concrete (1:1½:3)with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
248	Supplying all materials, labour, T&P and providing M.S.Reinforcement for RCC work including cutting, banding, binding, straightening and trying the grills and placing in position including cost of binding wire 18 to 20 gage.
249	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including cost of materials complete in ground floor.
250	RCC floor roof, chajja etc
251	RCC Beam, Column, wall etc
252	RCC Plinth bend/ Raft
253	Base slab
254	Supplying all materials,labour,T&P and providing 12mm thick cement plaster(1:3) on brick work including watering,curing,cost of all materials, conveyance of all materials to worksite,paymentof royalty,all taxes etc.all complete as per PWD specification and direction of the Engineer-in-charge.
255	Supplying all materials, labour, T&P and providing cement punning including watering, curring and conveyance of all materials to site.
256	Quantity same as item No-4
257	Supplying and fitting and fixing stainless steel 34 grade in said rail using 5mm dia 2mm thick circular pipe and balustrade 32mmx32mmx2mm at the rate of mtr.Center to center and square pipe 32x32x2mm below including welding with stanless steel elect rod and fixing with necessary accessories etc.complete as per direction of the Engineer-in-charge.
258	Providing fitting and fixing RCPCcoveretc complete as per direction of Engineer-in-charge
259	Construction of 2nos production wells including scientific source finding through consolidated and unconsolidated rock with down the hammer drilling rig or combination rig with PVC pipe and installation of submersible pump set with all acessories
260	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
261	Drilling of 200mm dia bore
262	00 mtr to 30mtr
263	30 mtr to 45mtr
264	Drilling of 150mm dia bore
265	45 mtr to 215.00mtr
266	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
267	Lowering of 200mm dia P.V.C casing pipes
268	00 mtr to 30 mtrs
269	30 mtr to 60mtr
270	Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber \"O\" ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
271	200mm dia PVC (sch-80) pipe
272	Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
273	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
274	By DTH Rig
275	Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of Ground Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation:
276	Rocky terrain with boulder formation for 300m depth
277	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
278	1 H.P. Single phase/ three phase 3 stagehead renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby)
279	DOL Control panel
280	40mm dia steel short piece
281	Well cap
282	50mm size CI bracket
283	2.50sqmm flat cable
284	20mm dia rigid UPVC pipes
285	Steel rope with cover
286	Labour charges for lowering including transportation
287	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceilingand floor all complete as per specification and direction of the Engineer in charge
288	32mm HDPE pipes (Finolex/Supreme make)
289	E.I Works:- Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on modular GI box with modular base & cover of suitable size , MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels /HPL/ V Guard ) Group-ALP-165
290	Group-B LP-144, FP-63
291	Group-C LP-122,FP-52Ex FP-68CBP-1
292	Supply and fixing of 6Amp plugwith 6Amp switch on existing board. (Modulartype)(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)
293	Supplying and fixing of 2 nos 6 Amp Plug point 2 nos switch Modular type on modular metal box, base & cover with all connections.(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)
294	Supplying and fixing of 3 nos 6 Amp Plug point 3 nos switch, 1 No 15 Amp Switch & 1 No 15 Amp Socket Modular type on modular metal box, base & cover with all connections.(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)
295	Supplying and fixing of 15/16 Amp Plug point Modular type on modular metal box on surface/Recess with suitable size of Modularcover in front including cutting the wall and making good the same in cases of recessed conduit as required(Make-Great white/ Legrand / Roma/ Havells/ HPL/ Cona)
296	s/f of ac point consisting of 32Astarter with all connection compelete s per the direction of engineer in charge
297	Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulatedsingle core multistrand copper conductoras earth wire as required.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL) 2 X 1.5 sq.mm +1 X 1.5 sq.mm in 20 mm dia
298	2 X 2.5 sq.mm +1 X 1.5 sq.mm-do-
299	2 X 4 sq.mm +1 X 1.5 sq.mm -do-
300	2 X 6 sq.mm +1 X 2.5 sq.mm -do-(For Street Lights)
301	4 X 6 sq.mm + 2 X 2.5 sq.mm in 32 mm dia
302	1x1.5 mm2 for inverter wiring
303	Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 415V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) 4 WAY (4 + 12) DOUBLE DOOR, HORIZONTAL TYPE
304	2 way Single Door( for Street Lights)
305	Supply and fixing of 5Amp to 32A rating 240 V/415 V \"B\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. (Make-HPL/ Havells/ Legrand /L&T/C&S)Single pole (SP)
306	32 amp DP MCB
307	40A DP MCB (C-Series)
308	63 amp FP MCB
309	S/F of Bakelite angle holder/batten holder of ISI marked conforming to IS-1258/1987 in place of ceiling rose .
310	S/F. Of 1x9Wt. LED Bulb including all connections and accessories.(Bajaj/ Havells/Crompton/Philips make)
311	s/f of tube light18watt /20 watt ledfitting with cover( Make-Havells/ Philips/Cromptonas per the direction of side engineer in charge.
312	S/F. Of 48\"AC Ceiling fans including all connections and accessories of Usha Allure Dlx/Havells Pacer/Orient Summer Pride/Equivalent make.
313	Supply and fixing of modular type Electronic Type fan regulator (Make-Cona/ Anchor/ Usha/Bajaj)
314	S/F of 300mm exhaust fan of Usha/Orient/Havells/Equivalent make.
315	S/F of 450mm,1400 rpm exhaust fan of Usha/Havells/Equivalent make
316	S/F of 18Watt Surface mounted LED downlighter with white powder coated aluminium housing with integrated electronic driver.(Make-Havells/Crompton/Philips/Bajaj))
317	S/F. of 90Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips make.
318	S/F. of 45Wt. LED Street light fittings complete with G.I. bracket. Of Bajaj/Havells/Crompton/Philips make.
319	supply of 3 1/2 core 95 mm2 XLPE insulated Aluminium Armoured cables ISI marked.(Make-Havells/Polycab/KEI/Equivalent)
320	supply of 3 1/2 core 35 mm2 XLPE insulated Aluminium Armoured cables ISI marked.(Make-Havells/Polycab/KEI/Equivalent)
321	Laying of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size excedding 25 sq.mm but not exceeding 120 sq.mm direct in ground including excavation , sand cushioning, protective covering and refilling the trench etc. as required.
322	Laying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of sizeexceeding 25 sq.mm but not exceeding 120 sq.mm on surface as required.
323	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as required
324	special cu plate earthing-Supply and fixing of Special Coper Plate (6006003.15mm with running coper flat 25*5mm long) Earthing with G.I earth pipe 3mtr. Long 40mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per the directuion of the site engineer in charge
325	Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required
326	Providing and fixing of Spike type Lightning Arrestor including all connections and accessories as per direction of engineer-in-charge
327	Supplying and laying 25 mm x 5 mm copper strip on surface or in recess for connection etc as required.
328	Supply and laying of 70 sq mm singlecore Copper UnArmouredcables ISI marked.(Make-Polycab/Havells/KEI/Equivalent)(For Vertical Run)
329	Supply, delivery and laying of 40mm HDPE pipe and cable inside the HDPE pipe as per construction standard specification and draning etc
330	Supply, intallation, testing and comissioning of ABC type fire exstinguisher of 6 kg capacity including cost of all material and labour etc. (Make-Sunmax/Atasee/Ceasefire/Equivalent)
331	S/F of 40x42x12no 16/18 SWG sheet metal for main 250amp panel board having250 amp MCCB 36 KA as incommer,250 amp electrolyte cu bus bar and 100A, 25 kA FP MCCB-4No.,40A DP MCB-6 No as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge (make: Siemens / legrand/Schneider/Equivalent)
332	S/F of 36x30x10no 16/18 SWG sheet metal for main 100 amp panel board having100 amp MCCB 25 KA as incommer,63 amp FP MCCB 16 KA-4 No.,100 amp electrolyte cu bus bar and 40A DP MCB-4No.,as Outgoing with ampere meter, voltmeter, toggler switch,three nos led indicator and as per the direction of site engineer in charge.(make: Siemens / legrand/Schneider/Equivalent))
333	Approved for 108 ( One hundred eight) items only

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of 100 Seated Ladies Hostel(G Plus 2) With Terrace At Govt. Polytechnic Angul For The Year 2023-24, Angul-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of 100 Seated Ladies Hostel(G Plus 2) With Terrace At Govt. Polytechnic Angul For The Year 2023-24, Angul-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us