Rural Works Department has published Tender For Construction Of Day Care Phc Building At Baradihi Under Udala Block In The District Of Mayurbhanj For The Year 2023-24.. Submission Date for this Tender is 19-04-2024. Building Work Tenders in baripada Odisha. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | C. W |
2 | Ground Floor |
3 | Earth Workinexavationoffoundation in hard soil within initial leads of 50m & lifts of 1.5m including dressing and levelling of bed etc. and adding contractor"s profit and over head charges, etc. complete in all respect. |
4 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect.(As Per A/R Page No-1, Item No-2) |
5 | Cement Concrete (1:3:6) using 40mmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
6 | R.C.C.M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. |
7 | COLUMN BASE FOOTING |
8 | COLUMN SUPER STRUCTURE |
9 | PLINTH BAND |
10 | LINTEL BAND |
11 | ROOF BEAM |
12 | CHAJJA |
13 | STAIRCASE 1 |
14 | ROOF SLAB |
15 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
16 | Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Foundation and Plinth including watering curing, cost of carriage and royalty of all materials, cost of all labour, etc complete. |
17 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
18 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
19 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
20 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royaltyof all materials, cost of all labour,etc complete as per the direction ofE.I.C.Ref(A/R-2006,P-103,Item no-27) |
21 | Supplying, fitting and fixing Vitrified (600mm x 600mm)tile in floors of approved make conformaing to IS:13755 laid on 25 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C. |
22 | Supplying, fitting and fixing Granaite tile in floors of approved make conformaing to IS:13755 laid on 20 mm thick cement mortar (1:4) and filling joints with white cement of approved quality including cost of all materials, etc. required for the work all complete as per direction ofE.I.C. |
23 | Fixing Vitrifird tiles in dados skirting and risers of steps on 12mm thick CP (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including cost, carriage, cost of all labour etc. complete. |
24 | Priming 1 coat with wallprimer water bond cement primer including all labour, materials etc. complete. |
25 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. |
26 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
27 | Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
28 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheetetc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. |
29 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect. |
30 | Supplying,fitting-Fixing of Two Track UPVC Openable Door of approved make with 6mm thick glass of approved quality complete with frame , shutters and all fitting and features. |
31 | Providing fitting fixing AIuminium door with OEL anodized AI door section of 9202 as vertical member 9201 as top member and 9200 as bottom and middle member and 6mmglass fixed in top portion, bottom portion fixed 12mm novapan board etc. complete (Revised A/R , item No. 10) |
32 | Supplying, fitting, fixing of two track UPVC Sliding window track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with 6mm thick glass of approved quality complete with frame. Sutters and all fitting and fixtures |
33 | Supplying and fixing-Fixing of Un-plasticised poly vinyl chloride (UPVC) (FENESTA/NCL VEKA LTD.) Ventilators Top Hung-60-Series duly manufactured using UPVC reinforced profiles of 60mm x 50mm x 2.5mm for outer frames, 75mm for outer frames. 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & welded through fusion welding the window sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No. per set of sashes and th esystem isto be installed at the site using anchor fasteners, silicon rubber sealant,easy glazing/deglazing at site etc. including cost and conveyance of all material, accessories, labour charges, materials and product conforming to ASTM D 638-14,EN-447-95 and other applicable codes and standards.(Ref.-Office of the Engineer-In-Chife (CIVIL), Odisha Nirman Soudha,Bhubaneswar. Lt. No-16100) |
34 | Supplying fitting fixing of 2"-0" wide Almirah made out up 19mm & 12mm BWR Ply & covered with 1mm Laminated (Sunmica) including Cromium coated handle 75mm with 125 x 25mm / 100mm with 150x25mm includingall fitting including cost of material all taxes, T&P etc complete as per direction of Engineer -in-charge |
35 | Painting two coats with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. |
36 | 25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. |
37 | Cement Concrete (1:2:4) using 12mmsize hard granite C.B. chips approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
38 | Supplying, fitting and fixingUltra-Designer pre-cast concrete paver tile in floors treads of steps and landingon 80 mm thick bed of cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only) |
39 | Providing fitting and fixing of false ceiling with Aluminum anodised T Section No. 3215 with 2"-0 center to center, L section NO. 1705 upto 15 micron on 4 walls to be fixed by means of steel screw and P.V.C plug and the Aluminium grid 2-0 x 2" - 0" with 6mm thick plain A.C.Sheetof 125mm thick. etc. complete. |
40 | Head Room |
41 | R.C.C.M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. |
42 | COLUMN SUPER STRUCTURE |
43 | ROOF BEAM |
44 | CHAJJA |
45 | ROOF SLAB |
46 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
47 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
48 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
49 | 16mm thick C.P. (1:6) over brick masonary to the smooth surface including watering, curing cost, carriage, royalty, and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
50 | 6 mm thick C.P. (1:4) to RCC surfaces finished smooth including closed deep chiping and slury treatment , watering, curing cost, carriage & royaltyof all materials, cost of all labour,etc complete as per the direction ofE.I.C.Ref(A/R-2006,P-103,Item no-27) |
51 | Priming 1 coat with wallprimer water bond cement primer including all labour, materials etc. complete. |
52 | 12mm CP |
53 | 6mm CP |
54 | Finishing wall surface with Cement based wall putty (water based) of approved make and finished smooth & even surface to receive painting including cost of scaffolding etc. with cost of all materials, labour etc. complete. |
55 | Wall painting 2 coats with plastic emulsion paint of approved shade on new work to give an even shade including cost of paint etc complete. |
56 | Wall painting two coat with any approved weather coat paintincluding cost of all materials, labour and T&P require for the work etc. complete as directed by the E.I.C. |
57 | Supplying of M.S. Door, Window with grills, Grills made out of M.S. Angle frame, M.S. Flat, Sheetetc of approved section & design, electrically welded properly with all necessary locking arrengement, and 1 coat red oxide primer including cost of all materials, labour charges, carriage of materials to site etc. complete. |
58 | Painting two coats with approved enamel paints of approved colour, shade over a coat ofprimer including sand papering, polishing the surface, cost, conveyances of all materials and cost of all labour etc, complete as per specification & direction of E.I.C. |
59 | 25mm thick CC 1:2:2 with 6mm size CB chips for grading concret over roof slab etc. complete. |
60 | Gate with Cow Catcher |
61 | Earth work in hard soil or gravelly soil within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the E-I-C. |
62 | Supplying & filling of foundation with course sand well watered and rammed including cost, cost of all labour, carriage, royalty complete in all respect.(As Per A/R Page No-1, Item No-2) |
63 | Cement Concrete (1:3:6) using 40mmsize hard granite C.B. metal approved quality from approved quarry including cost, carriage, royalty, cost of all labour. etc complete and as directed by E.I.C. |
64 | R.C.C.M-20 grade with 20mm and down grade C.B. chips of approved quality from approved quarry including hoisting, laying hire charges of concrete mixture, vibrator, watering, curing and cost of all materials and labour, centering shuttering etc complete but excluding cost of reinforcement. |
65 | Column base footing |
66 | Column |
67 | Beam |
68 | Beam |
69 | Drain Wall |
70 | Brick work with Flyash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:6) in Super Structure including watering curing, cost of carriage, royalty and taxes of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
71 | Straightening, cutting, bending bent up or coiled rods, including cranking, hooking, welding or jointing the M.S. rods or tor confirming to I.S. 432 (Plain) and 1785 (Tor) steel and binding, tying the grills, hoisting, lowering and placing in proper position required for R.C.C. works including cost, conveyance and taxes of M.S. rods or tor steel and binding wires of 18 to 20 gauge and cost of all labour etc.complete in all respect. |
72 | 12mm thick C.P.(1:6) on brick masonary to the smooth surface including watering, curing, cost, carriage, royalty of all materials, cost of all labour, etc complete as per the direction of E.I.C. |
73 | Fixing Granite tiles in dados and skirtingand risers of steps on 12 mm thick bed of cement mortar 1:3, 1 cement : 3 sand jointed with neat cement slurry mixed with pigmant to match the shades ofthe tiles including rubbing and polishing complete including cost of tiles and all materials etc. complete. |
74 | Suplying,fitting,fixing of M.S.Grills frames & shutter including cost of all labour,materials etc. complete |
75 | Painting two Coats to the new surface of wood and iron work with one coat with primer and two coat with any approved shade of paint including all cost etc complete. |
76 | Providing, fitting & fixing of M.S. J sectionISMB 100 including of all cost, conveyance etc all complete. |
77 | Providing, fitting & fixing of G.I. Pipes of 100mm dia including of all cost, conveyance etc all complete. |
78 | Providing, fitting & fixing of M.S. Flat including of all cost, conveyance etc all complete. |
79 | Approach Road |
80 | Earth workin excavation of foundation in hard soil or gravelly soil including dressing and levelling the bedand disposal of the excavated materials within initial leads and lifts as per direction of E.I.C. |
81 | Supplying & filling foundation and plinth with sand well watered and rammed including cost, carriage, royalty & taxes of all materials, cost of all labour,T&P etc complete. |
82 | Cement Concrete (1:3:6) using 40mmsize hard granite C.B. metal of approved quality from approved quarry including hoisting, laying, using concrete mixture and vibrators including watering, curing, cost, carriage, royalty & taxses of all materials etc. complete. |
83 | Supplying fitting and placing uncoated HYSD bar reinforcement complete asper drawing and technical specification. |
84 | Cement concrete (1:2:4) with 12mm size chips of approved quality etc.comp. |
85 | Earth work for embankment in hard soil.( with mechanical means) |
86 | Providing and laying 80 mm thick factory made cement concrete interlocking paver block of M 30 grade made by block machin of approved size, design & shape and in required patter on road surfce including filling the interstics with sand etc complete. |
87 | Dismantaling |
88 | Dismentling and removing R.C.C. roof, lintel etc and removing the debries away from site. |
89 | Dismentling and removing Brick or stone massonary up tp 3.0M. height and removing the debries away from site. |
90 | Dismentling and removing wrought and roof frame and removing the debries away from site. |
91 | Dismentling and removing A.C. sheet roofingand removing the debries away from site. |
92 | Dismentling and removing old tile flooring and removing the debries away from site. |
93 | Dismentling and removing Doors and windows and removing the debries away from site. |
94 | EI |
95 | Wiring |
96 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) |
97 | -do- Group A |
98 | -do- Group B |
99 | -do- Group C |
100 | Recessed wiring to Fan Point in... |
101 | -do- Group B |
102 | Recessed wiring to Call Bell Point in... |
103 | -do- Group C |
104 | Recessed wiring to Exhaust Fan Point in….. |
105 | -do- Group C |
106 | S/F of fan hook "S" type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
107 | S/F of Angle holder replacing Ceilling Rose |
108 | Wiring for twin control light/fan point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked in recess PVC conduit with 2 way piano type modular switch with suitable modular base & cover and earthing point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor for loop earthing etc as required. ( Make of wire -Finolex / L&T / Anchor / Havels /Vguard) |
109 | Switch Boards |
110 | S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board |
111 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. |
112 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
113 | S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no of Mini MCB complete with wiring on 12 modularM.S. box with modularcover. |
114 | S/F of 1 no of 5 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as requiredfor Inverter connection |
115 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
116 | 2 Modular box with base & cover |
117 | 4 Modular box with base & cover |
118 | 6 Modular box with base & cover |
119 | 8 Modular box with base & cover |
120 | 12 Modular box with base & cover |
121 | Sub-Main |
122 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) |
123 | 2x1.5+1x1.5 (1.8.1) |
124 | 2x2.5+1x1.5 (1.8.2) |
125 | 2x4+1x1.5 (1.8.3) |
126 | 4x6+2x2.5(1:8:10) |
127 | Inverter wiring (1x2.5smm) Copper wire (1.19.11a) |
128 | Circuit Breakers |
129 | S/F of 6 way (6+18) TPN MCB DB double door with provision of 63Amp 4P MCB-1 No,32A DP MCB-3 Nos & 6 to 32Amp SP MCB 12 Nos (2.5.6) |
130 | Earthing |
131 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
132 | Supply & laying 8 SWG Cuwire in recess for loop earthing as required (3.18) |
133 | Fitting |
134 | Providing & fixing plain 16/0.2mm twin twisted flexible, FR PVC insulated copper cable in polythene sleeve or conduit of suitable size on the floor/wall or side of the table/door etc as required.(1.31) |
135 | Supply, Installation, Testing & Commissioning of exhaust fan upto 225 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43) |
136 | S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
137 | S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
138 | Supply of 1200mm BLDC A.C. Ceiling fan with Aluminium blade & 28 Watt ISI Mark &all accessories and connections with out fan regulator (Make:Usha-TEOHNIX ISI 5 STAR 28 WATT( 4 Year Warranty )/Crompton-ENERGION GROOVE BLDC 5 STAR /Havels-EFFICIENCIA NED BLDC 5 STAR /Orient-ELECTRICAL EECOTECH SUPER . |
139 | S/F step type modular fan regulator |
140 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval typeincluding necessary connections. ( M-5 ) |
141 | Supply & Fixing of 30-35Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
142 | Supply & Fixing of 45-48 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
143 | Supply & Fixing of 60 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
144 | S/F of10w Watt LED Bulb |
145 | S/F of 1.5T 3Star split type AC Machine, Make-Carrier/Voltas/Hitachi |
146 | S/F of 5KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard |
147 | S/F of15A Socket on 2 Modular Board for A.C |
148 | S/F of 25A Moter Starter switchfor A.C(Make-Havells/Anchor/Le-Grand ) |
149 | S/F of 1650 VA/24V Inverter with 2 nos. 150Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous |
150 | S/F of18W LeD Squre (12"×12") LSDSMN-12W-WW with surface Panel rings (Havels/crompton/philips/panasonic) |
151 | Panels |
152 | Supply & fixing of 100 A TPN Panel board 1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) & 100A kitkat & bus bar 2. 32 A TPN MCB(Make- Legrand/Seimens/L&T/C&S/)- 2nos 3. 32A DP MCB(Make- Legrand/Seimens/L&T/C&S/)- 5 nos 4. 100 A 4P Manualchangeover (Make- Legrand/Seimens/L&T/C&S/)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
153 | Provision of D.G Set |
154 | P.H Works |
155 | 30 user septic tank |
156 | Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soilas per direction of EIC. |
157 | Initial lift upto 1.5 mtr |
158 | From 1.5 mtr to 3.0 mtr depth |
159 | Supplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
160 | 4.37 m x 3.18 m x 0.15 m |
161 | Supplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
162 | Supplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
163 | Supplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC |
164 | ( a) In F&P in cm (1:3) |
165 | Supplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC |
166 | 3.82 m x 2.63 m x 0.125 m |
167 | Supplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.- |
168 | Supplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC- |
169 | Supplying all materials labour T&P and providingcement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
170 | ( a )12mm thick CP (1:3) |
171 | Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
172 | Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
173 | Filling F&P with excavated materials including watering and ramming as per direction of EIC |
174 | Supplying all labour materials T&P and fixing of 2” RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC |
175 | Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
176 | Supplying all labour materials T&P and fixing of MS step iron in 20mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC- |
177 | Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
178 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated usingE-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size "S" shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre"s standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the E.I.C |
179 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
180 | Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles inwalls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC. |
181 | Ground FloorWall |
182 | Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. GroundFloor |
183 | Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC. |
184 | Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mmthick wall |
185 | 375mm thick wall |
186 | Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C. |
187 | Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
188 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:4:8) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrestetc all complete as per specification and direction of the E.I.C.(580mmx440mmSize) (Neycer/ Parry ware/ Cerra/Hindware Make) |
189 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral ‘S’trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with ‘S’ trap plain(Neycer/ Parry ware/ Cerra/Hindware Make) |
190 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra/Hindware Make) |
191 | Supplying all materials labour T&P and fitting & fixing UPVC SWRsoil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast) 110mm dia UPVC SWR Pipe |
192 | 110mm dia U-PVC S. Trap |
193 | 110mm dia U-PVC P. Trap |
194 | 110mmU-PVC S/J with Door |
195 | 110mmU-PVC door bend |
196 | 110mm dia U-PVC Plain bend |
197 | 110mm U-PVC Plain Tee |
198 | 110mm U-PVC Cowl |
199 | 125mm dia CP Grating |
200 | 75mm dia U-PVC SWR Pipe |
201 | 75mm dia U-PVC Plain Tee |
202 | 75mm U-PVC Door Bend |
203 | 75mmU-PVC Plain Bend |
204 | Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC610x510x200 mm StainlessSteel kitchen Sink heavy good quality |
205 | Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-(Neycer/ Parry ware/ Cerra/Hindware Make) |
206 | Pedestral 550x400mm WHB |
207 | Supplying all materials labour T&P and fixingmirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic FrameMirrorGood quality |
208 | Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600)heavy Stainless steel with Jaquar make . |
209 | CP Towel ring heavy Stainless steel withJaquar make . |
210 | Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality |
211 | Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC15mm dia cpshower(Jaquar make) (Shower+Arm) |
212 | Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelfwith heavy good quality |
213 | Supplying all materialslabour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern(Neycer/ Parry ware/ Cerra/Hindware Make) |
214 | Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASHBrick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
215 | Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASHBrick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
216 | Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C 910mm x 910mm x 910mmm Manhole chamber |
217 | Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.22m dia x 2.10m deep |
218 | Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASHBrick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC.1.20m dia x 2.00m deep soak way pit |
219 | Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing |
220 | Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C. |
221 | 20mm dia C-PVCPipe( Internal) |
222 | 25mm dia C-PVCPipe (external) |
223 | 40mm dia C-PVCPipe (external) |
224 | Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC.15mm dia CP pillar cockJAQUAR Make |
225 | 20mm dia cp concealed stop cock JAQUAR Make |
226 | 15mm diacp angle stop cockJAQUAR Make |
227 | 15mm dia cp bib cock S.B.JAQUAR Make |
228 | 15mm dia cp bib cock L.B. JAQUAR Make |
229 | 15mm dia CP Two way bib Cock JAQUAR Make |
230 | Health FuccetJAQUAR Make |
231 | 15mm dia CP flange JAQUAR Make |
232 | 15mm dia CP Extension pieceJAQUAR Make |
233 | 25mm dia Brass BallValve |
234 | 40mm dia Brass BallValve |
235 | Supplying all materials labour T&P and fixingwater storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. |
236 | 2000 lit sintex tank(1st Floor) |
237 | Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC. |
238 | 2000 ltr capacity tank 1st floor |
239 | Additional ht of 5.00mtr |
240 | Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
241 | Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
242 | Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
243 | Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
244 | Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
245 | Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC. 25mm dia HDPE Pipe(Internal Pipe) |
246 | SINKING OF TUBE WELL |
247 | 125x100mm dia Tube Well through ODEX Method Supplying all labour and drilling perfectly vertical bore holes in boulder formation areas with down the hole hammer drilling rigs or combination drilling rigs to suit the site condition with deployment of rig, necessary accessories and consumables for a specified depth below ground level including supply of necessary casing shoe, odex tools and plants jointing materials, extra sockets where rquired withdrawing of pipes, lowering the M.S (ERW) pipes and fitting and fixing in perfectly verticalposition including cutting and welding for jointing pipes for simultaneous casing lowering in over burden boulder formation till encounter of hard rock and to drill 125mm DTH upto the desired depth as may be necessary, clearing the site and washing bore etc., all complete providing sanitary sealing upto 5 meters depth below gound level as per the direction of Engineer-in-charge., (A) Labour for drilling of 125mm dia bore- |
248 | Cost of ERW Pipe |
249 | Labour for drillinga perfectly vertical bore hole of 100 mm dia for a specified depth below boulder zone through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs as requiredto suit the site condition as per the direction of Engineer-in-Charge including use of own rigs with its accessories, tools and plant and consuambles etc. |
250 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtainedfrom the tube well including supply of and use of all necessaryequipments andlabour as per the direction of engineer incharge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail