Rural Works Department has published Construction Of Multipurpose Cyclone Shelter Mcs At Mahala Dhinkia G.P. Erasama Block In The Dist Of Jagatsinghpur For The Year 2023-24 Building Works. Submission Date for this Tender is 19-04-2024. Building Work Tenders in jagatsinghpur Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | CIVIL |
| 2 | Providing & erecting necessary plants, equipments and labour for boring holes and casting of 450 mm dia bored cast-in-situ double under reammed RCC piles of 13.0 mtr length below the finished ground level as per drawing or as directed by the Engineer-in-charge for all piles with RCC M30 grade desgin mix concrete and rate shall include supply and cost of all materials such as stone chips, sand, cement and bentonite with all leads and lifts of materials but excluding the cost of reinforcement and the cost of boring holes for piles shall be included in the unit rate of piles. or as directed by the Engineer -in -charge. |
| 3 | Earth work in excavation of foundation trenches in hardsoil within initial lead and lift including dressing and leveling the bed upto the required depth and depositing the excavated materials away from the working area etc.complete as per the specification and direction of the Engineer-in-charge. |
| 4 | Cutting the disintegrated rocks not requiring blasing to be removed by pick axes and craw bars and depositing materials with 50 m and 1.5m initial lift including rough dressing as per direction of EIC |
| 5 | Supplying, filling in foundation and plinth with sand including watering andramming with cost, conveyance, royalties andtaxes of all materials and cost of labour with T&P required for the work etc. complete (Measurement will be taken on finished section only)as per the specification and direction of the Engineer-in-charge. |
| 6 | Fly ash brick masonary in cement mortar (1:6) in foundation and plinth using fly ash brick of size 25cmx12cmx8cm of approved quality from approved quarry having crushing strength not less than 75 kg/ sqcm with immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties of all materials and all labour, T&P etc. for scaffolding, watering and curing etc. complete as per the specification and direction of the Engineer-in-charge. |
| 7 | Cement concrete of prop. (1:3:6) in foundation and plinth using 4cm (1 1/2")size black hard crusher broken granite stone metals of approved quality from approved quarry including lowering, laying, concrete watering and curing etc. complete to required levels, laid in layers not exceeding 0"-6" thick inlcuding cost,conveyance,royalties and taxes of all materials and cost of all labour with T & P required for the work complete per the specification and direction of the Engineer-in-charge. |
| 8 | Providing cement concrete (1:2:4) below flooring with clean hard crusher broken granite chips of 12mm. (1/2”) size of approved quality and specificatiomn from approved quarry consistent with strength & cover of concrete ofin position in layers not exceeding 150mm thick in the proper packing by means of vibrator to proper slope andto the required level including hoisting lowering laying concrete providing sideshuttering & finishing all exposed surface smoothsupplying & working of pumps, labour & T&P articles & all machineries, dewatering if required including cost conveyance, royality of all materials complete as per specification & direction of the Engineer-in-Charge complete in all rerspects. |
| 9 | Providing & laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 10 | R.C.C.work of prop. (1:1.5:3) having aminimum comprresive strength (in work test) 250 kg/Cm2 in 15 cm cubes at 28 days after mixing and test conducted in accordance with IS 456 and IS 516 using 12mm size black hard granite crusher broken chips including hoisting,lowering, laying and compacting concrete by using vibrator with watering and curing for 28 days, centering and shuttering and finishing the exposed surface smooth providing grooves or beads where ever necessay including cost, conveyance,royalties of all materials and cost of all labour with T&P required for the work etc.complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as as per the specification and direction of the Engineer-in-charge. |
| 11 | Plinth Beam |
| 12 | Ground Floor |
| 13 | Column |
| 14 | Ground Floor |
| 15 | First Floor |
| 16 | Second Floor |
| 17 | Roof Beam |
| 18 | Ground Floor |
| 19 | First Floor |
| 20 | Lintel |
| 21 | First Floor |
| 22 | Roof Slab |
| 23 | Ground Floor |
| 24 | First Floor |
| 25 | Second Floor |
| 26 | Stair Case |
| 27 | Ground Floor |
| 28 | First Floor |
| 29 | Chhaja/Shelf |
| 30 | First Floor |
| 31 | Ramp |
| 32 | Ground Floor |
| 33 | Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire, cost and conveyance of HYSD bars of Fe 500D complete in all respect as as per the specification and direction of the Engineer-in-charge. |
| 34 | Ground Floor |
| 35 | First Floor |
| 36 | Second Floor |
| 37 | Fly ash brick masonary in cement mortar (1:4) in Superstructure using fly ash brick of size 25cmx12cmx8cm of approved quality from approved quarry having crushing strength not less than 75 kg/ sqcm with immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, royalties of all materials and all labour with T&P etc. for scaffolding, watering and curing complete as per the specification and direction of the Engineer-in-charge. |
| 38 | Ground Floor |
| 39 | First Floor |
| 40 | Second Floor |
| 41 | 20mm thick cement plaster in cement mortar (1:6) over stone masonary including watering and curing with cost, conveyance, royalty of all materials, labour charges, T&P etc. required for the work completeas per the specification and direction of the Engineer-in-charge. |
| 42 | Ground Floor |
| 43 | First Floor |
| 44 | Second Floor |
| 45 | 16mm (3/4") thick cement plaster in cement mortar (1:6) finished smooth to inside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royaltyof all materials with cost of all labour, T&P etc. required for the work complete asper the specification and direction of the Engineer-in-charge. |
| 46 | Ground Floor |
| 47 | First Floor |
| 48 | Second Floor |
| 49 | 12mm (1/2") thick cement plaster in cement mortar (1:6) finished smooth to outside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royaltyof all materials with cost of all labour, T&P etc. required for the work complete asper the specification and direction of the Engineer-in-charge. |
| 50 | Ground Floor |
| 51 | First Floor |
| 52 | Second Floor |
| 53 | 6mm (1/2") thick cement plaster (1:4) in all floors to RCC surface finished smooth including watering, curing, cost, conveyance, royalty and taxes of all materials and labour charges with T&P etc. required for the work complete as as per the specification and direction of the Engineer-in-charge. |
| 54 | Ground Floor |
| 55 | First Floor |
| 56 | Second Floor |
| 57 | Finishing wall surface with weather coat paint two coats over a coat of priming to outside surface using approved quality of weather coat paint and water bound primer of approved shade including cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge. |
| 58 | Ground Floor |
| 59 | First Floor |
| 60 | Second Floor |
| 61 | Finishing wall surface of walls with Acrylic wall putty (water based) of approved make and finsihed smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials, taxes, labour, T&P etc complete |
| 62 | First Floor |
| 63 | Second Floor |
| 64 | Painting two coats with plastic emulsion paint over a coat of water bond cement primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. |
| 65 | First Floor |
| 66 | Second Floor |
| 67 | Providing, fitting and fixing antiskid Ceramic tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing with cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 68 | Ground Floor |
| 69 | First Floor |
| 70 | Providing, fitting and fixing antiskid Kota tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing with cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 71 | First Floor |
| 72 | Providing, fitting and fixing Kota tiles in dados,skirting and risers of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing with cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 73 | Ground Floor |
| 74 | Providing, fitting and fixing Ceramic tiles in dados,skirting and risers of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing with cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 75 | Ground Floor |
| 76 | Providing, fitting and fixing Kota tiles in dados,skirting and risers of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing with cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 77 | First Floor |
| 78 | Providing, fitting and fixing Chequered Tiles in dados,skirting and risers of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing with cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 79 | First Floor |
| 80 | Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing with cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete in all respect as per the specification and direction of the Engineer-in-charge. |
| 81 | Ground Floor |
| 82 | First Floor |
| 83 | Supplying and fixing 46mm size thick GI Doors and frame conforming to IS 277 galvanised plain skin passed sheets of 0.80mm in shutter & 1.20mm in frame with minimum 120 GSM zinc coating with profile dimension of 100mm x 58mm frame filled with polyurethane frame and shutter duly filled with Honeycomb and both coated with minimum 60 microns of RAL / wood finish powder coating accessories will be provided with doors etc complete. (TATA Pravesh or equally reputed brand). |
| 84 | First Floor |
| 85 | Supplying & fixing GI Window (IS 513 D quality) and frame conforming to IS 277 galvanised plain skin passed sheets of 0.6mm in shutter & 0.8mm in frame with minimum 120 GSM zinc coating and fitted with acryllic sheet of 4mm thickness & MS Grill of 10mm square MS bright bars coated with zinc phosphate primer or thermos etting Polyurethane paint of aliphatic grade providing high level of scratch resistance and durability accessories will be provided with windows etc complete. (TATA Pravesh or equally reputed brand). |
| 86 | First Floor |
| 87 | Supplying, fitting and fixing of Angle iron Door frame , Window frame, Window frame with grill using A.L size of ( 40 x40 x 5 ) mm M.S flats (25 x 5 ) mm including cost ,conveyance etc including cost of all materials & labour . |
| 88 | First Floor |
| 89 | Fitting fixing of F.R.P panelled shutter with F.R.P door frame in doors including cost of stainless steel hinges, screws ,aluminium aldrops, tower bolts, handles of approved quality size and make as per the direction of the Engineer-in-charge with sand blocks and hinged cleats cost, conveyance, royality and taxes of all materials and labour etc. complete in all respects. |
| 90 | First Floor |
| 91 | Making grooves of 3 mm deep & 10mm wide on plastered surface at all joints of concrete & brick masonry. |
| 92 | First Floor |
| 93 | Providing, fitting & fixing Ventilators of size 600mm x 300mm with well seasoned chemically treated sal wood frame and with Acrylic sheet louver with approved jally. |
| 94 | First Floor |
| 95 | Painting two coat with approved synthetic enamel paint to new wood & iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. |
| 96 | First Floor |
| 97 | Fixing and fitting 110 mm dia PVC rain water down pipe spouts of 500 mm length including cutting holes in parapet making good to the damages in CC 1:2:4 with portland slag cement |
| 98 | First Floor |
| 99 | Providing Black board of size 2m x 1.5m over brick walls 20mm thick cement plaster etc complete. |
| 100 | First Floor |
| 101 | Providing and fixing a Marble Plaque of size 5"x2.5"x1" (thick) with engraving informations for users as per direction of the Engineer-in-charge. |
| 102 | First Floor |
| 103 | Construction of embankment with approved material obtained from borrow pits with all lead and lifts, transporting to site by mechanical means within a lead of 5 km., spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H specifications etc. complete. |
| 104 | Supplying and Laying of Heavy duty factory made Interlocking Approved Brand Paver Block of 80 mm thick coral shaped on preparation of sub base with 30 mm sand and levelling laying of interlocking paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc. complete as per direction of Engineer-In-Chief. |
| 105 | Providing and fixing a Sign Board for informations for users as per direction of the Engineer-in-charge. |
| 106 | R.C.C. work of M-30 grade with 20mm and down grade black hard granite(crusherbroken) stone chips of approved quality from approved quarry including hoisting and laying concrete watering and curing etc. complete inlcuding cost, conveyance, royality and taxes of all materials and cost of all labour with T & P required for the work complete as per the specification and direction of the Engineer-in-charge. |
| 107 | E.I. |
| 108 | Wiring |
| 109 | Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) |
| 110 | -do- Group A |
| 111 | -do- Group B |
| 112 | -do- Group C |
| 113 | Recessed wiring to Fan Point in... |
| 114 | -do- Group B |
| 115 | -do- Group C |
| 116 | Recessed wiring to Exhaust Fan Point in….. |
| 117 | -do- Group C |
| 118 | S/F of fan hook "S" type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 119 | S/F of Angle holder replacing Ceilling Rose |
| 120 | Swich Board |
| 121 | S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board |
| 122 | S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required. |
| 123 | S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required |
| 124 | S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. |
| 125 | 2 Modular box with base & cover |
| 126 | 4 Modular box with base & cover |
| 127 | 6 Modular box with base & cover |
| 128 | 8 Modular box with base & cover |
| 129 | 12 Modular box with base & cover |
| 130 | Sub main |
| 131 | Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard) |
| 132 | 2x1.5+1x1.5 (1.8.1) |
| 133 | 2x2.5+1x1.5 (1.8.2) |
| 134 | 2x4+1x1.5 (1.8.3) |
| 135 | Circuit Breakers |
| 136 | S/F of "B/C/D" series SP MCB of 5 - 32A amp rating (As per direction of engineer in charge)240Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required single pole (SP) (2.6.1) |
| 137 | Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) |
| 138 | S/F of MCB 8 way Double door (2.3.6) |
| 139 | Earthing |
| 140 | Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 141 | Supply & laying 6 SWG G.I. wire in recess for loop earthing as required (3.17) |
| 142 | Fitting |
| 143 | Supply, Installation, Testing & Commissioning of exhaust fan upto 300 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43) |
| 144 | S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL |
| 145 | Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-High speed /Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS ) |
| 146 | S/F step type modular fan regulator |
| 147 | Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval typeincluding necessary connections. ( M-5 ) |
| 148 | Supply & Fixing of 60 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells) |
| 149 | panels |
| 150 | Supply & fixing of 63A TPNPanel board 1.63A MCCB (Make- Legrand/Seimens/L&T/C&S/) 2.63A kitkat & bus bar 3. 32A DP MCB- 4 nos 4. 63 A 4P load changeover switch (Legrand/Seimens/L&T/C&S)- 1nos 5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad) |
| 151 | P.H. |
| 152 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor P.V.C pipes conforming to ASTM-F-441(Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.- 20mm dia C-P.V.C. pipe [Internal] |
| 153 | 25mm dia C-P.V.C. pipe [Internal] |
| 154 | 32mm dia U-P.V.C. Pipe[External] |
| 155 | 40mm dia U-P.V.C. pipe[External] |
| 156 | supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for takingwater supply pipes and fittings including making good the damages etc. all complete as per P.H. specification and direction of E.I.C.-- 250mm thick walls |
| 157 | supplying all materials, labour, T&P and cutting holes in R.C.C walls,Floors, roofs for taking water supply pipes and fittingsincluding making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. |
| 158 | Supplying all materials,labour,T&P and cutting grooves in pucca floors and walls for taking G.I./ P.V.C pipes and making good the damages all complete as per specification and the direction of the E.I.C. |
| 159 | Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittingsof the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C.- 15mm dia. C.P Bibcock (Short body) with C.P Flange [Jaquar] |
| 160 | 15mm dia. C.P Bibcock (long body) with C.P Flange [Jaquar] |
| 161 | 15mm dia.C.P angle stopcockwith C.P Flange [Jaquar] |
| 162 | 20mm dia.C.P concealed stopcockwith C.P Flange [Jaquar] |
| 163 | 15mm dia C.P pillarcock [Jaquar] |
| 164 | 15mm dia C.P. Two Way Bib Cock with C.P Flange[Jaquar] |
| 165 | 15mm dia C.P. Health Faucet [Jaquar] |
| 166 | 15mm dia C.P Extension piece. |
| 167 | 25mm dia.PVC ball valve [Metal Ball] |
| 168 | 32mm dia.PVC ball valve[Metal Ball] |
| 169 | 40mm dia.PVC ball valve[Metal Ball] |
| 170 | Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishingetc all complete as per specification and direction of the E.I.C-15mm dia.C.P revolving shower |
| 171 | Supplying all materials, labour, T&P and fitting and fixing SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches with earth work including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer"s specification, testing etc all complete as per P.H specification and direction of the E.I.C. --110mm dia SWR pipe |
| 172 | 75mm dia SWR pipe |
| 173 | 110mm dia SWR P trap |
| 174 | 110mm dia SWR door Tee |
| 175 | 110mm dia SWR plain Tee |
| 176 | 110mm dia. SWR Door bend |
| 177 | 110mmdia. SWR Plain/Shoe bend |
| 178 | 110mm dia. SWR Cross door Tee |
| 179 | 110mm dia. SWR Offset. |
| 180 | 110 mm dia. SWR Cowl |
| 181 | 125mm dia. C.P. Grating |
| 182 | 75mmdia.SWR Plain tee |
| 183 | 75mm dia. SWR Door bend |
| 184 | 75mmdia. SWR Plain/Shoe bend |
| 185 | 50mm dia SWR pipe |
| 186 | 50mm dia. SWRPlain bend |
| 187 | supplying all materials, labour, T&P and cutting holes throughbrick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C.Necessary Jointing Materials fixing to coloums , wall wih Pipe clip and/ or Ironclamps , nails at internvals of 750mm or part thereof all complete.-- 250mm to 375mm thick wall |
| 188 | supplying all materials, labour, T&P and cutting holes through R.C.Cwall, floors, roof for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. |
| 189 | Supplying all materials, labour, T&P and fixing water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal etc all complete as per specification and direction of the E.I.C.- 580mm Orissa pan(Neycer/Cerra/ Parry ware/ Hindware) |
| 190 | Supplying all materials, labour T&P and fixing Wash Down Water Closet(European type W.C. pan) with Integral ‘S’ or ‘P’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.C--E.W.C. with ‘S’ trap Plain(Neycer/Cerra/ Parry ware/ Hindware) |
| 191 | Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Cerra/Parry ware/ Hindware) |
| 192 | Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C(Neycer/ Cerra/Parry ware/ Hindware) |
| 193 | Supplying all materials, labour T&P and fixing wash basins with hole for pillar taps with C.I. or M.S.brackets painted white, with 32 mm dia CP waste, 32mm dia PVC waste pipe, including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, etc all complete as per specification and direction of the E.I.C.- 550mm x 400mm WHB with all Fittings with C.P. Waste, PVC Waste Pipe & Connection Pipe. (Neycer/Cerra/ Parry ware/ Hindware) |
| 194 | Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.- 600mmx400mm B.E Mirror (fixed type) |
| 195 | Supplying all materials,labour, T&P and fixing standard sized CP towel rail/ring, coat hook complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C- CP Towel Rail with hook. |
| 196 | CP towel ring |
| 197 | Providing and fixing Stainless Steel Horozontal /Vertical Grab Bar 600mm length fixed to PVC Cleats with C.P. brass Screws wherever required with approved make & quality and as per the direction and to the satisfaction of Engineer-in-charge. |
| 198 | Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C |
| 199 | Supplying all materials, labour T&Pand fixing Half stall Magnumurinal including the connecting the urinal with waste pipe by means of white lead list with chopped hemp etc. all complete as per direction of E.I.C.-- Flat back lipped wall urinal (standing Urinal) including 32mm dia PVC Waste Pipe with brass coupling nut & 15mm dia PVC inlet connection Pipe [Neycer/CerraParrywear/Hindware] |
| 200 | Supplying all materials,labour, T&P and fixing glazed earthen ware Squatting plate size 450x350 mm with integral longitudinal flushing pipe including embedding the plate in 25mm thick cement mortar (1:8) laid over PCC (1:5:10) using 40 mm size metal etc all complete as per specification and direction of the E.I.C. 450 x 350 mm Squatting Urinal (Ladies) [Neycer/Cerra/Parrywear /Hindware] |
| 201 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.[First Floor] |
| 202 | Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C.[First Floor] |
| 203 | Supplying all materials, labour T&Pand fixing Marble partition wall for Urinal with cutting grooves on walls and making good the damagesincluding rubbing and polishing complete as per specification and direction of E.I.C. (1st Floor) |
| 204 | Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated usingE-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size "S" shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre"s standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/ Champagne/ Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the E.I.C |
| 205 | Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 206 | Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C. - Initial lift up to 1.50m[100 User] |
| 207 | From 1.50m to 3.00m depth |
| 208 | Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.[100 user S.T] |
| 209 | Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- .[100 user S.T] |
| 210 | Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- .[100 user S.T] |
| 211 | Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2with dimensional tolerence of +/- 8% in C.Mincluding watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- In F&P in c.m(1:3) (st-100) |
| 212 | In Super structure in c.m(1:4) |
| 213 | Supplying all materials, labour, T&P and providing reinforced cement concrete (1:1.5:3) with 12mm size H.G chips for R.C.Cworks including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- Ground Floor |
| 214 | Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.-- Ground Floor |
| 215 | Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- Ground Floor |
| 216 | Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.- 20mm thick C.P (1:3) G.Floor |
| 217 | 12 mm thick C.P in C:M (1:3) |
| 218 | Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.Ground Floor |
| 219 | Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works includingwatering curring and conveyance of all materialsto work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.Ground Floor |
| 220 | Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth includingwatering, ramming etc all complete as per direction of the E.I.C. |
| 221 | Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C.bafflewall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.Ground Floor |
| 222 | Supplying all materials, labour, T&P and providing & fixing P.V.C Tee in wall including filling the necessary with P.C.C(1:2:4)using 12mm size HG chips all complete including watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per direction of the E.I.C.- 16O mmXI 60mm X160mm PVC Tee |
| 223 | Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded inC.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C. |
| 224 | Supplying all materials, labour, T&P and providing pre-cast R.C.C. manhole cover with C.C (1:1.5:3) of 12mm size chips includingconveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- (size- 550mmx550mmx76omm |
| 225 | Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:1.5:3) mix using 12 mm size H.G chips, foundation concrete (1:3:6) using 40 mm size HG metal on bed and around trap , !st class Fly Ash Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap &C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.- Inside size 250mmx250mm Gully Trap Chamber |
| 226 | Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C- Inside size 750mmx750mm x450mm Inspection Chamber |
| 227 | Addle.depth |
| 228 | Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class Fly Ash Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C- Inside size 900mmx900mmx900mm Manhole Chamber |
| 229 | Addle.depth of 0.15 Mtr. |
| 230 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with pre cast R.C.C ringsjoined loose , gravel backing in the rear of well stening , pre cast R.C.C cover Slabs in C.C (1:2:4)using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- 0.90mdia.x 2.10m deep RCC Ring Soak Pit. |
| 231 | 1.20mdia.x 2.10m deep RCC Ring Soak Pit |
| 232 | Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brickwalling from bottom upto invert of inlet pipe and 1st class Fly Ash brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.- 1.80mdia.x 2.00m deep Soak Way Pit |
| 233 | Supplying all materials, labour, T&P and laying ofSWR (Type-B) soil waste pipes of the following internal diameter conforming to I.S.No-13592/1992in trenches of the depth upto 1.20 mtr including jointing with supply of approved rubber lubricant by non-heat application method on bedding with 150mm thick C:C (1:3:6) using h.g metal of 25 mm to 40 mm and then making allround encasing includingearthwork in excavation in all kinds of soil with refilling of trenches watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per direction of the E.I.C.- 110mm dia.with Allround concrete encasing. |
| 234 | 160mm dia.with Allround concrete encasing. |
| 235 | Sinking of 125x100mm dia tube well through Hand boring Method Supplying all materials, labour, T&P and setting up boring equipments including irrection of suitable stagging for installation of the required size of tube-well. Dismantling & removing the same after completion of the work including transportation of boring equipments clearing & leveling the site, excavation of mud pit channels etc., leveling of site all complete as per direction of E.I.C(Labour) |
| 236 | Supplying all labour, T&P & transportation of boring pipes, top casing, grouping pipes, PVC pipes and fitting, PVC well screens, cement, betoniteetc. including loading and unloading etc. complete as per direction of the E.I.C.(Labour) |
| 237 | Supplying all labour, T&P and drilling pilot bore not less than 102mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc.and withdrawing the boring pipes washing & keeping the bore clear for logging if required all complete as per the direction of EIC-- Pilot bore 100mm dia (00 mtr. to 360 mtr.) |
| 238 | Supplying all labour, T&P & reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc. all complete as per direction of E.I.C. -100 mm ot 150 mm dia( 00 mtr to 360 mtr) |
| 239 | 150 mm to 200 mm dia( 00 mtr to 360 mtr) |
| 240 | 200 mm to 250 mm dia( 00 mtr to 360 mtr) |
| 241 | Supplying all labour, Tools and plant and lowering the 300mm dia top casing pipe into position and removing the same after use as per the direction of Engineer-in-charge. |
| 242 | Supplying all labour, T&P and jointing materials and lowering the PVC casing pipes fitting and well screens in position including fitting of centralizer cutter plugs and washing the bore as per the direction of E.I.C.(Including cost of Materials)125 mm dia PVCPipe (Schedule-80) |
| 243 | 100 mm dia PVCPipe (Schedule-80) |
| 244 | 100 mm dia PVC strainer |
| 245 | 125x100 mm dia PVC R/S |
| 246 | 100 mm dia PVC Cone |
| 247 | Lowering of 125mm/100mm dia PVC Pipe |
| 248 | Supplying all labour, T & P and packing the bore with washed gravel ( size-P-6) around the pipes in good quality including cost of gravel etc. all complete as per direction of Engineer-in-Charge- |
| 249 | Cost of Gravel |
| 250 | Supplying all labour, T&P materials and providing sanitary sealing by cement slurry groutingaround the uppermost 3.00 mtrs. of 125 mm dia PVC casing pipe .including cost of cement all complete as per direction of E.I.C(including cost of 2 bags of Cement) |
| 251 | Cleaning the developing the tube well using compressor continuouslyto get clear and adequate dischargefrom the tube well including the supply and use of all necessary equipment and labour as per direction of E.I.C(Labour Charges) |
| 252 | Supplying all labour, T&P and materials for fitting and fixing of India Mark-II Deep well Hand Pump with cast Iron cylinder, 12mm/16mm dia B.S. Connecting rod, 32mm dia G.I.Pipe of required lengths with supply of extra socket of approved make all complete including carriage, coveyanceas per direction of Engineer-in-charge. |
| 253 | Supplyingall labour, T&P and materials for Construction of Masonary Platform for India Mark-II Hand Pump as per I.S. Specification of 1.85 mtrOutside with Cement Concrete (1:2:4) with 12mm size hard granite C.B. chips etc. all complete including 760mmx760mmx400mm deep cement concrete embeded around the bore well pipe as per direction of Engineer-in-Charge. |
| 254 | Supplying all materials, labour, T&P and construction of 100mm wide waste water drain for India Mark-II Hand Pump platform as per UNICEF design and specification with C.C (1:2;4) using 12mm size hard granite crusher broken chips etc. all complete as per direction of Engineer-in-Charge. |
| 255 | Supplying of ISI Mark 1.50 HP Single Phase Vertical Submersible Pump Set with Discharge of 2300-3000 liter/hour and a head of 45-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage. |
| 256 | Supplying all labour, T&P and fitting and fixing of 1.50 HP Single phase vertical Submersible Pump Set with commissioning and testing, Electrificationetc. all complete as per direction of EIC |
| 257 | Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.50 HP Single Phase Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 258 | Supplying and fitting and fixing of three core flat cable (2.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge. |
| 259 | Supplying and fitting & fixing of Plastic rope, M.S. Well Cover, M.S. Clamp, Stainless Steel Short piece, Bend & Socket including all const, conveyance and taxes etc. all complete as per direction of engineer-in-charge. |
| 260 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor PVC Pipes conforming to ASTM-D-1785/89(sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and direction of E.I.C-32mm dia HDPE Pipe [Inside Tw] |
| 261 | 32mm dia HDPE Pipe [External Including Earth Work] |
| 262 | 12 mm thick C.P in C:M (1:3) |
| 263 | Vent Base:-2 x 4 x 0.50 x 0.50 m= |
| 264 | ST Outside-2 x (6.46+2.86) x 0.30= |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
