Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 08-06-2024 | Corrigendum No 5 | Financial Bid | 12-06-2024 |
| 2 | 25-05-2024 | Corrigendum No 4 | Date | 12-06-2024 |
| 3 | 15-05-2024 | Corrigendum No 3 | Date | 01-06-2024 |
| 4 | 06-05-2024 | Corrigendum No 2 | Date | 22-05-2024 |
| 5 | 23-04-2024 | Corrigendum No 1 | Date | 13-05-2024 |
| Sl. No. | Item Description |
| 1 | SCHEDULE \"A\" B/R Works |
| 2 | Dismantling brick/PCC terracing tiles single layer in roof laid and pointed in cement mortar and removing/disposal off from the site complete all as specified and as directed by Engineer-in-charge. |
| 3 | Demolition of mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing/cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and Labour for Roughening surfaces of existing concrete surfaces of roofby picking , sweeping , clean and washing down with water to remove dust etc and brushing with neat cement slurry @ 3.0 Kg of cement per Sqm complete all as specified and directed by Engineer-in-charge. Note: The rate of neat cement slurry @ 3.0 Kg of cement per Sqm is included in this item and nothing shall be paid extra on this account. |
| 5 | Material and labour for cement concrete (1:2:4) type B-0, using 12.50 mm graded stone aggregates as in roof padding including mixing with Water Proof Compound as per manufacturer\"s instructions and finished even and fair complete all as specified and as directed by Engineeer-in-charge.Note :- Water Proof Compoundshall be measured and paid for separately under respective item of Schedule\"A\" BoQ. |
| 6 | Material and Labour for 15 mm thick screed bed or bedding layer in cement mortar (1:4) on roof surfaces,parapet or vertical beam surface (horizontal or vertical) finishing the surfaces even and fair complete all as specified and as directed by Engineer-in- charge. |
| 7 | Supply only liquid water prrofing compound ISI marked |
| 8 | Material and labour for tack coatlayer of blown grade bitumen of any penetration applied hot @ 1.70 Kg per Sqm andpriming the surface @ 0.30 Kg per Sqm and with and including material and labour for laying 3mm thick APP based polymer membrane of weighing not less than 3.5 Kg per Sqm reinforced with polyster non woven fabric (weight not less than 150 Gm per Sqm) laid on primed surface at by torch application with side overlap 75mm and end overlap 100mm and tucked into the chasesas a treatment for moderate condition complete all as specified and as directed by the Engineer-in-Charge. Note: The rate of3mm thick APP based polymer membrane is included in this item and nothing shall be paid extra on this account. |
| 9 | Material and labour for PCC (1:2:4) Type B0 using 12.5mm graded stone aggregate as in roof kerb (golla) or mud stops, side of roof sheet & similar work etc rounded or chamfered on edges including necessary form work etc complete all as specified and directed by Engineer-in-Charge. |
| 10 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge. |
| 11 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan exc. 6 metre mean radius built in cement mortar (1:6) complete all as specified and as directed by Engineer-in-charge. |
| 12 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 13 | Material and labour for rendering/plastering 10mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 14 | Material and labour for rendering/plastering 15mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 15 | Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces (external surface), finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | Material and labour for preparing newly plastered or concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces and applying two coat of olil bound distemper with (paint brush /with roller ) complete all as specified & directed by Engineer-in- charge |
| 17 | Material and labour forPreparation of old decorated surfaces (plastered/unplastered) of ceiling by remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom /steel patti / wire brush / sand papering or by any other mean including applying 2mm thick wall care puttyto make the surface smooth and glossy upto the entire satisfactionand after reparing the surface smooth applying two coat of oil bound distemperwith roller only complete all as specified and as directed by Engineer-in-Charge. |
| 18 | Material and labour for preparation of New plastered/ concrete surface of wall/Pillars/cornices by brooming down with using broom/sand papering or by other means, and preparing the surfaces smooth by applying 2mm thick wall care putty to make the surface smooth by using sander machine (with provision of dust sucking) upto entire satisfaction and after preparing the surface applyingtwo coats of plastic emulsion paint(with roller brush )complete all as specified and as directed by Engineer-in-Charge. |
| 19 | Matterial and labour for complete removal of existing treatment (any layers of existing treatment) and efflorescence from Old decorated surface of wall/pillars/cornices by scraping down with using Mechanical sander machine (including provision of dust sucking) upto entire satisfaction of Engineer-in-Charge brooming down and preparing the surfaces smooth and make good by applying2mm thick wall care puty withwhite cement based, Make Birla, JK or equvilent as approved by Engineer -in-Charge and sanding the surface by Mechanical sander machine to make the surface even and smooth upto entire satisfaction of Engineer -in-Charge and after that appplying two coat of plastic emulsion paint (with roller brush only) complete all as specified and directed by Engineer-in-Charge. |
| 20 | Material and labour for preparation of Newly plastered/ concrete surface of wall/Pillars/cornices by brooming down with using broom/sand preparing or by tany other means, and preparing the surfaces smooth by appling one coat of primer and applying one coat of 2mm thick wall care putty Make : Birla, JK or equivelent to make the surface evenand smooth by using sander Machine (With provision of dust sucking) upto entire satisfaction of Engineer-in-Charge and after preparing the surfaceapplyingthree coats of acrylic smooth exterior emulsion paint,as approved tint/colour by using paint roller brush complete all as specified and directed by Engr-in-Charge |
| 21 | Material and labour for complete removal of existing treatment (any layers ofexisting treatment) effloresence from old decorated surface of wall/pillars/ cormices by scraping down with using Mechanical sander machine( including provision of dust sucking) upto entire satisfaction of Engineer-in-Charge brooming down and preparing the surfaces and after that applying two coats of acrylic smooth exterior emulsion paint as approved tint/colour by using paint roller brush only complete all as specified and directed by Engineer-in-Charge. |
| 22 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. |
| 23 | Material and labour for vitrified ceramic coloured tiles (light shade) 10 mm thick square or rectangular area of each tile not exceeding 0.36 sqm, as in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 24 | Material and labour for vitrified ceramic coloured tiles (light shade) 10mm thick square or rectangular (same as floor tile, as per above item ), as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 10 mm thick bedding layer (rendering) in cement mortar (1:4) complete all as specified and directed by Engineer-in-Charge. |
| 25 | Material and labour for Non Skid ceramic coloured tiles7 to 8 mm thick square or rectangular area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile includingnecessary cutting as per site requirement, tiles laid over and including 15 mm thick bedding layer (screed) in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge. |
| 26 | Material and labour for Glazed ceramic coloured tiles of size 350mmx 250mm / 450mmX 350mm/ 450mmX 300mm, 7mm to 8mm thick, as in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement, tiles laid over and including 10 mm thick (Av thickness) bedding layer (rendering) in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform/steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge. |
| 28 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform/cooking plateform or as directed, including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement(1:2)using marble dust with admiture of pigmentto matchwith shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Material and labour for 18-20mm thick any of black/mahroon colour of marble work other than (table rubbed and polished) as in counter sunk wash basin, steps, jambs, pillars, windowcills, cooking platforms and like, set and including screed bed 15mm thick in cement mortar (1:4),including pointing in white cement(1:2)using marble dustwith admiture of pigment to match with shade of marble slab, including machine cutting to make it square or rectangular or as per site requirement including cleaning and extra polishing if required, complete all as specified and as directed by Engineer-in-Charge. |
| 30 | All as per item No 28 above but as in skirting/dado/riser etc including 10mm thick rendering in Cement mortr (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 31 | Material and labour for moulding the edges half round on exposed side (Rounding to edges of stone slabs one edge) of granite/marble as in kitchen shelf, cooking platform WHB counter, steps and other similar situations etc complete all as specified and as directed by Engineer-in-Charge. |
| 32 | M&L for PCC (1:3:6) type C0 using 12.5mm graded aggregate as in back filling of chowkats and for hold fast complete all as specified and as directed by Engineer-in-Charge. |
| 33 | Material and labour cutting holes in brick walls in cement mortar for inserting holdfast and making good dismantled portion in cement mortar 1:3 or cement mortar 1:2:4 type B1 using not exc half brick walls depth embeddded portion of holdfast or lugs for coller stand, measured from the faces jamb into walls complete all as specified and as directed by Engineer-in-Charge. |
| 34 | Demolition of cement concrete (unreinforced) in ground floor and above ground floors and paving not exceeding 15cm thickness below or above ground level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Material and labour for 75mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in flooring, hard standing, plinth protection/path etc. finished even and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | Material and Labour for 75mmCement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Material and Labour for machine pressed precast interlocking paver block 60 mm thick with grey cement and no pigment, factory made, any shape and size, conforming to IS 15658-2006, made out of M-35 grade concrete laid over and including 25 mm thick layer of sand cushioningcomplete all as specified and as directed by Engineer-in- charge. Note: The rate of 25mm thick layer of sand cushioning is included in this item and nothing shall be paid extra on this account. |
| 38 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames, wooden/PVC doors/steel ventilator) areanot exceeding 1.50 sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and asdirected by Engineer-in- charge. |
| 39 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) areaexceeding 1.50 sqm but not exceeding 4 Sqm each and removing from site including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast complete all as specified and asdirected by Engineer-in- charge. |
| 40 | Supply and fixingfactory made 105 x 60mm pressed steel frames, thickness of sheet 1.25mm for doors with one or more rebates including supply and fixing necessary lugs and lock strike plate, etc. , including fixing butt hinges suitable Nos as directed for each leaf, complete all as specified and as directed by Engineer-in- charge. Note : -(i) Butt hinges shall be measured and paid separately under appropriate item of BOQ. |
| 41 | Supply & fixing factory made plain framed panelled shutters (two panels as approved), 35mm thick of 2nd class hard woodwith lock rail and panel inserts of 12mm veneered particle board with commercial veneering on both faces. The size of rails and styles as per IS-1003 (Part-I), kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, including 2nd class soft wood kail beading 20mm wide tapering from 10mm to 5mm on one side and also fitted to chowkhatcomplete all as specified and as directed by Engineer-in- charge. Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item (painting) of BOQ. |
| 42 | Supply & fixing factory made glazed and skeleton shutter, 35mm thick of 2nd class hard woodopen rebated (two panels as approved) and prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc.Sizes of members as specified in SSR Part-I, Section 8 and fitted to chowkhats,menbers shall be kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and as directed by Engineer-in- charge.Note : -(i) The sutters shall be brought at site without primer and same shall be applying at site as per direction of Engineer-in-charge. Primer shall be measured paid separately under appropriate item of BOQ. |
| 43 | Supply and fixed solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawingcomplete all as specified and as directed by Engineer-in-Charge. |
| 44 | Supply and fixed factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engineer-in-Charge. |
| 45 | Supply and fixing 100mm long powder coated mild steel butt hinges medium weight cold rolled complete all as specified & directed by Engineer-in-charge. |
| 46 | Supply and fixing anodised aluminium handle cast type 125mm long complete all as specified & directed by Engineer-in-charge. |
| 47 | Supply and fixing anodised aluminium handle cast type 150mm long complete all as specified & directed by Engineer-in-charge. |
| 48 | Supply and fixing aluminium anodised barrel tower bolt of extruded section, 200mm longcomplete all as specified & directed by Engineer-in-charge. |
| 49 | Supply and fixing aluminium anodised barrel tower bolt of extruded section, 150mm longcomplete all as specified & directed by Engineer-in-charge. |
| 50 | Supply & fixingaluminium anodised sliding door bolts 250mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed by Engineer-in- charge. |
| 51 | Supply & fixing powder coated aluminium anodised frame, made out of aluminium section / aluminium chanel, powder coated(minimum thickness of powder coating not less than 50 micron), for doors, windows, ventilators with one or more rebate including jointing cleat for fixing etc. including taking down old unserviceable frame complete all as specified and as directed by Engineer-in-Charge.Note :- Weight of aluminium section/aluminium channel shall be physically ascertained through a board of officers convened by Accepting officer and payment shall be made only after the actual weight at site. |
| 52 | Supply & fixing anodised powder coatedaluminium shutter for window /Ventilator/ door made out of aluminium section weighing 0.55 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos andaluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 53 | Material and labour for mild steel work conforming to Fe-290 (GdeE-165)as in grills, gratings etc. with ends of bars shouldered and/ or rivetted or forged into spikes; framed guard bars, walkways, railing, framed work of water tanks and similar works complete all as specified and as directed by Engineer-in- charge. |
| 54 | Supply & fixing 5.5mm thick tinted sheet glass ordinary quality/figured glass pin head in squares not exceeding 0.5sqm in each pane and fixed with oil putty etc. as required or as directed complete all as specified & directed by Engineer-in- charge. |
| 55 | S&F mild steel 300mm long rat tail rod pattern spring including roller and roller plate and fixing to wooden frame with screw complete all as specified and directed by Engr-in-Charge |
| 56 | S&F in repair Floor door stoper (150mm) of aluminiuk alloy body and tngue, anodised , with hard drawn steel spring fixed in floor complete all as specified and directed |
| 57 | Supply & fixing galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tack or galvanised wire staplescomplete all as specified & directed by Engineer-in- charge. |
| 58 | Material and labour for Preparation ofnew wooden or wood based surfacesof any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed by Engineer-in- charge. |
| 59 | Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge. |
| 60 | Material and labour for preparation ofnew steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed by Engineer-in- charge. |
| 61 | Material and labour for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth by cleaning the dust and removing all loose particle with using sanded paper, clean cloths and dry paint brush & applying one coat of synthetic enamel paint (1st quality) of approved tint/colour to achieve glossing finish with using paint brush complete as specified and as directed by Engineer-in-Charge. |
| 62 | Demolition of cement concrete (unreinforced) in first floor, ground floor, sunken portion and paving at any thickness below or above floor level of any description and in any position including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 63 | Material and labour for sunken treatment to sunken floor, cleaning the surface by wire brush, rendering to floor and sides with 10mm thick in cement mortar (1:3) including mixing of liquid WPC in mortar @ 200ml per bag of cement of 50kg, finished even and smooth without using extra cement, after that material & labour providing two coat of two components (one part liquid two part powder) ready to use cementitious water proofing coating on properly prepared surface by brushing having elongation of > 50% for the applying water proofing treatment on horizontal and vertical surfaces of sunken floor, complete all as specified and as directed by Engineer-in-charge.NOTE:- (i) Applying 1st coat of two components modified polymer coating.(ii) Provn of glass fiber mess of 2mm x 2mm immediately on alone coating.(iii) Apply 2nd coat of two components modified polymer coating after 72 Hrs on horizontal and vertical surfaces. |
| 64 | Material and labour for 25mm thick cement concrete (1:2:4), type B-0 using 12.5 mm graded stone aggregate as in floor, sunken floor etc, finished rough to receive tiles, including mixing of liquid WPC in mortar @ 200ml per bag ofcement of 50kg, complete all as specified and as directed by the Engineer-in-Charge.(Note :- WPC shall be measured & paid separately as Supply only) |
| 65 | Material and labour for rendering/plastering 15mm thick in cement mortar (1:4) on any face of Brick walls or concrete surfaces including mixing of liquid WPC in mortar @ 200ml per bag ofcement of 50kg, finished even and smooth without using extra cementcomplete all as specified and as directed by the Engineer-in-Charge.Note :- Water proofing compound shall be measured & paid separately as Supply only |
| 66 | Material and labour for applying one coats of Dr fixit pidecrte in sunken floorportion of toilets and bathrooms chajja stair case etc by using of 1 to 2 Sqm and applying by brush etc, complete all as specified and directed by Engr-in-Charge |
| 67 | Material & Labour for PCC (1:5:10) type E-2 using 40mm graded stone aggregate as loose filling of sunken floors complete all as specified and as directed by Engineer-in-charge. |
| 68 | Material & Labourfor 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears,fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay and jointing with cement mortar including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge. |
| 69 | Material & Labourfor 100 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears,laid on floor/trenches and jointing with cement mortar including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge. |
| 70 | Material & Labourfor 75 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears,fixed to wall with stack clamps (interval of 1m) made out of FI 50x5mm and 16mm dia round iron stay and jointing with cement mortar including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge. |
| 71 | Material & Labourfor 75 mm bore cast iron soil waste and vent pipe (spun pipe ) in any length with or without ears, laid on floorand jointing with cement mortar including dismantling/taking down/out old pipe complete all as specified and as directed by Engineer-in- charge. |
| 72 | Material & Labour for 100 mm diacast iron floor trap with CP grating including jointing to waste pipewith solvent fixed in cement concrete(1:2:4) type B-1 using 20 mm graded stone aggregate including taking out old floor trap complete all as specified and directed by Engineer-in-Charge. |
| 73 | Material & Labour for 75 mm diacast iron floor trap with CP grating including jointing to waste pipewith solvent fixed in cement concrete(1:2:4) type B-1 using 20 mm graded stone aggregate including taking out old floor trap complete all as specified and directed by Engineer-in-Charge. |
| 74 | Supply & fixingin replacement 100mm bore cast iron bends (any radius)/elbo,diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge. |
| 75 | Supply & fixingin replacement 75mm bore cast iron bends (any radius)/elbo,diminishing pieces or tapers (larger bore measured) with oval access door fixed with cement joints complete all as specified and as directed by Engineer-in- charge. |
| 76 | Supply & fixingin replacement 100mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with ovalaccess door as specified & directed by Engineer-in- charge. |
| 77 | Supply & fixingin replacement 75mm bore CI branch pieces single (equal or unequal), ordinary or inverted (Spigot or socket type) or with parallel branch fitted with ovalaccess door as specified & directed by Engineer-in- charge. |
| 78 | S&F 100mm bore cast irontraps, \"P\" & \"S\" complete all as specified and directed |
| 79 | S&F 100mm bore cast iron cowlcomplete all as specified and directed |
| 80 | S&F 75mm bore cast iron cowlcomplete all as specified and directed |
| 81 | Supply & fixing in replacement 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints for drain or rain water fixed along walls with stack clamps made out of FI 50x5mm and 16mm dia round iron stay (interval of 1m) including nut bolt and PCC work, including dismantling/taking down old pipe complete all as specified and as directed by Engineer-in- charge. |
| 82 | Supply & fixing PVC (SWR) bends (any radius) suitable for 110mm bore pipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge. |
| 83 | Supply & fixing 110mmbore PVC (SWR) \"Y\"/\"T\" junction (double/ single ), equal or unequal (any radius) suitablepipe fixed to walls or laid in floor complete all as specified and as directed by Engineer-in- charge. |
| 84 | S&F in repair stainless steel plate rack standred of min size 750mm x900mm fixing with steel screw and complete all as necessary itemscomplete all as specified.Make : Parryware/Jayana/Hindware |
| 85 | Taking up or down existing galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc. including removing from site/keeping aside for reuse (serviceable as good condition as directed) complete all as specified and as directed by Engineer-in-charge. |
| 86 | Taking up or down existing galvanised steel water tubing (GI pipe)20mm bore including fitting/connection from wall/ceiling/floor/concealed etc. including removing from site/keeping aside for reuse (serviceable as good condition as directed) complete all as specified and as directed by Engineer-in-charge. |
| 87 | Supply and fixing galvanized steel tubing (GI pipe) medium grade 15mm bore ISI marked with all new fittingslike elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as required) and making good disturbed surfaces of walls including cutting and threading of existing pipe any dia for insertaion of tee branchincluding hole in wall to pass the pipe out side for connection as per site requirmentcomplete all as specified and as directed by Engineer-in- charge. |
| 88 | Supply and fixing galvanized steel tubing (GI pipe) medium grade 20mm bore ISI marked with all new fittingslike elbow, tee, union, socket, reducer etc. and fixed complete to walls, ceiling and laid in floor or concealed in walls including cutting chases in wall (as required) and making good disturbed surfaces of walls including cutting and threading of existing pipe any dia for insertaion of tee branchincluding hole in wall to pass the pipe out side for connection as per site requirmentcomplete all as specified and as directed by Engineer-in- charge. |
| 89 | Supply and fixing in repair vitreous china EWC complete set including flushing cistern,Seat Cover,Jet Sprayand with all assembly /fittings and connection to drain (or outgoing pipe) complete all as specified and directed by Engr-in-ChargeMake : Jaguar CAT Part No : VGS-WHT-81751P and VGS-WHT-81201 |
| 90 | S&F in repairs Vitreous china (White) Wash Hand Basin (WHB) Oval type Table Top Fancy including 32mm dia CP waste coupling, waste pipe, PVC connection and all necessary fittings complete all as specified and directed by Engr-in-ChargeMake : Jaguar Cat Part No : FNS-WHT-40931 |
| 91 | S&F5-6mm thick mirror including ingraved any pattern, or with wooden beading of any sizefixed to wall with CP screwd with top cap and all connected fitting complete all as specified and directed. |
| 92 | Supply & fixing in replacement bathroom Cabinet Mirror size 450mm x 350mm selected quality glass, complete all as specified and as directed by Engineer-in-charge. |
| 93 | Supply & fixing in replacement stainless steel sink made out of 1.00mm thick sheet, overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm, kitchen or laboratory withplugs, washers, waste pipe includingbedding in cement mortar, fixing in existing space or fixing with cast iron cantilever brackets and connecting union to waste pipe, including taking down old unserviceable sink including fixing to granite/marble stone complete all as specified and directed by Engineer-in-Charge. |
| 94 | Dismantling/taking down of existing unserviceable PVC water storage tanks capacity exc. 500 litre but not exc. 1000 litre complete all as specified and as directed by Engineer-in-charge. |
| 95 | Supply & fixing rotational mouldedpolyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection and including ball valve and gate valve, complete all as specified and as directed by Engineer-in-charge. |
| 96 | S&F in repairfor chromium plated toilet paper holder complete fixed to wall complete all as specified. Make : Parryware/Hidware/Priyag |
| 97 | Supply & fixingin replacement 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified and as directed by Engineer-in-charge. |
| 98 | Supply and fixing in replacement bib tap long bodycast copper alloy, chromium plated fancy type, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule15mm bore complete all as specified & directed by Engineer-in-charge. Note :- The minimum weight shall be as given in SSR or in relevant IS. |
| 99 | Supply & fixing in replacement Mixer valve 15mm bore, brass (cast copper alloy) chromium plated, mixer for mixing hot & cold water suitable for WHB/Wall/Sink , screwed down for iron pipe 15mm borecomplete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of mixer valve shall be as given in SSR or in relevant IS. |
| 100 | Supply & fixing in replacement hand shower (health faucet) ABS body including 1 meter long 8mm dia flexible tube and including wall hook including taking down old any type shower complete all as specified and as directed by Engineer-in-charge. Make :- Cat Part ALD-CHR-593N of Jaquar or equivalent (Equivalency approved by GE) in make mentioned in Appx A to PSS-II |
| 101 | S&FGlass sheet assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-charge. |
| 102 | Supply and fixing in replacement stop valve/angle valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock/angle valve shall be as given in SSR or in relevant IS. |
| 103 | Supply and fixingin replacement concealed stop cock cast copper alloy,chromium plated, fancy type, long shank and cup, screwed both ends suitable for15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Note :- The minimum weight of stop valve/stop cock shall be as given in SSR or in relevant IS. |
| 104 | Supply & fixing in replacement cromium plated shower rose 125mm size, with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-charge. |
| 105 | Supply & fixing in replacement gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS. |
| 106 | Supply & fixing in replacement gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 15mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. Note :- The minimum weight of gate valve shall be as given in SSR or in relevant IS. |
| 107 | Supply and fixing CP grating doom 125mm dia with/without waste hole (min weight 40gms) complete all as specified and directed |
| 108 | Supply and fixing 19mm internal dia MS pipe with PVC coated drapery rod (Curtain Rod) of approved make including fenials and brackets for door and window including taking down old curtain rod and palmet box complete all as specified and directed by Engr-in-Charge |
| 109 | Supply and fixing MS cromium plated, soap tray approximate 160mm, including fixing to wall with CP screws and PVC plug complete all as specified and directed by Engr-in-Charge |
| 110 | Excavation in trenches in soft / loose soil not exceeding 1.5 metre wide & not exceeding 1.5 metre in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed byEngineer-in-Charge . |
| 111 | Demolition and breaking up drain pipes SGSW, AC or reinforced concrete pipe upto and including 150 mm bore pipes, complete all as specified and directed by Engineer-in-Charge. |
| 112 | Material & labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate to drain pipe including packing under & haunching against the sides of pipe 150 mm dia ( internal) after they are laid and tested in trenches, complete all as specified and directed by Engineer-in-Charge. |
| 113 | Material & labour for 150 mm dia ( internal) Reinforced concrete pipes, class NP2, laid and jointed complete with collars laidin trenches & jointed, complete all as specified and as directed byEngineer-in-Charge . |
| 114 | Demolition of cement concrete of any description in ground floor or in any position not exceeding 15 cm thickness, complete all as specified and as directed byEngineer-in-Charge . |
| 115 | Material & labour for cement concrete 1:3:6 type C-2 using 40 mm graded crushed stone aggregate for foundations, fillings & mass concrete, sub base, plinth protection, complete all as specified and as directed byEngineer-in-charge. |
| 116 | Material & labour for cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate for manhole benching, flooring and coping, complete all as specified and as directed byEngineer-in-charge. |
| 117 | Supply & Fixed in repair SFRC (Steel fibre reinforced concrete) cover and frame (heavy duty HD-20 grade designation) size of cover 0.70 x 0.70 conferming to IS 12592, fixed in cement cocrete 1:2:4, complete all as specified and directed by Engineer-inCharge. |
| 118 | Returning/filling in including spreading, leveling, watering & well ramming in layers not exceeding 25 cm thick each, complete all as specified and as directed byEngineer-in-Charge. |
| 119 | Removal of excavated material to distance not exceeding 1.5 metre above the starting point, complete all as specified and as directed byEngineer-in-Charge . |
| 120 | Material and labour cutting into existing Manholes/septic tank for connecting new drain upto 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round to 3/4 section) in cement concrete (1:2:4) type B1 using finished and reforming benching as required complete all as specified and directed by Engr-in-Charge |
| 121 | M&L for 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet ,self for cupboard including cut edges of prelaminated board to be sealed with 6mm teak lipping and all necessary fittings including dismantling of board of any description and type complete all as specified and directed. |
| 122 | M&L for 12 mm thick prelaminated partical board interior grade prelaminated both side with decorative choice lamination fixed with screw to timber frame work/aluminium frame work including dismantling of board of any size and type complete all as specified. |
| 123 | S&F 30mm wide Continuous (piano) hinges, mild steel, bright finish or electrogalvanised fixing to wooden frame complete all as specified |
| 124 | S&F 100mm long fency type Stainless steel handles, cast type, polished bright complete all as specified and directed |
| 125 | S&F magnet catcher fixed in cabnet shutter (one portion) and wooden frame (other portion) with screw complete all as specified and directed |
| 126 | Demolition of RCC as in roof slabs (other than ground floors), beams, stair case, landing, chajjas, and similar suspended work (reinforcement cut as required to facilitate demolition) all as specified and directed by Engr-in-Charge |
| 127 | M & L for RCC 1:2:4 Type B0 (12.5mm graded stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, deck slabs and in shelves and the like.(Reinforcement will be measured and paid for separately) |
| 128 | M & L for RCC 1:2:4 Type B0 (12.5mm graded stone aggregates) as in fins, fascias, louvers, parapets, and railings exc. 60cm in height, balustrade, and the like. (Reinforcement will be measured and paid for separately) |
| 129 | Use and waste of form work to sides and soffits of floor or roof beams, roof slabs, cantilevers, shelves etc and similar items rough finished surface complete all as specified and directed by Engr-in-Charge |
| 130 | Use and waste of form work to sides and soffits of fins, louvers, fascia and similar items rough finished surface complete all as specified complete all as specified and directed by Engr-in-Charge |
| 131 | S & F mild steel TMT bars 10 mm dia , and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to Fe 410-W, Gde E-250 complete all as specified . |
| 132 | All as per ser item No.131 here-in-before but 6 to 8mm dia complete all as specified and directed by Engr-in-Charge. |
| 133 | All as per ser item No.131 here-in-before but 6 to 8mm dia in stirrups, spacess and binders complete all as specified. |
| 134 | M&L for rough cast plastering including 15 mm thick rendering in cement plaster 1 :4 complete as specified in SSR Part-I clause 14.22 as given .Note : Rough cast finish : After applying under coat of cement mortar 1:3 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1 shall be applied complete including taking down cement lime plaster and applying two coats of cement based paint over a coat of primerall as specified and as directed by the Engineer-in-Charge. |
| 135 | Material & Labour for 35mm thick precast cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate as in louvers and jallies/Jaffari (measured solid) including all moulding and MS wire but excluding frame and set in cement mortar (1:4) including necessary form work including taking down old broken/unserviceable jalli, complete all as specified and as directed by Engineer-in-charge. |
| 136 | Material and labour for rendering/plastering 10mm thick (matching with existing plaster thickness) in cement mortar (1:6) on old brick or concrete surfaces of walls/pillars /cornices in patches matching with existing, finished even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 137 | Material and labour for rendering/plastering 5mm thick (matching with existing plaster thickness) in cement mortar (1:3) on any face of ceiling in patches matching with existing, finished fair and even and smooth without using extra cement, complete all as specified and as directed by the Engineer-in-Charge. |
| 138 | Material and labour for applying two coats of white wash on newly plastered or unplastered ceiling surfaces including preparation ofsurfaces, complete all as specified and as directed by Engineer-in-charge. |
| 139 | Material and labour for applying one coat of white wash on old plastered or unplastered ceiling surfaces including preparation ofsurfaces, complete all as specified and as directed by Engineer-in-charge. |
| 140 | Material and labour for preparing of old surfaces smooth and make goodby applying average 3mm thick layer of white cement based wall care putty and sanding the surface by using mechanical sander machine to make the even and smooth upto entire satisfaction and after that applying two coats ofoil emulsion distemper (washable), as approved tint/colour by using paint roller brush over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 141 | Material and labour forPreparation of new decorated surfaces (plastered/unplastered) of wall including applying 3mm thick wall care puttyto make the surface smooth and glossy upto the entire satisfactionand after preparing the surface smooth applying two coat of oil bound distemperwith roller over a coat of primer complete all as specified and as directed by Engineer-in-Charge. |
| 142 | Material and labour for preparation of old plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying one coats of cement base paint as per approved tint/colour byusing paint brush complete all as specified and as directed by Engineer-in-Charge. |
| 143 | Material and labour for preparation of new plastered surfaces of walls/pillars /cornices by brooming down with using broom/sand papering or by any other mean, washing down with water and applying twocoats of cement base paint as per approved tint/colour byusing paint brush complete all as specified and as directed by Engineer-in-Charge. |
| 144 | Material and labour for brick work with sub class ‘B’ old size burnt clay bricks, straight or curved on plan to any radius in half brick walls built in CM (1:4), etc; complete all as specified and as directed by Engineer-in-charge. |
| 145 | Taking down shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm eachcomplete all as specified and as directed by Engineer-in- charge. |
| 146 | Supply & fixing anodised powder coatedaluminium shutter for door made out of aluminium section weighing 1.10 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos andaluminium hinges 04 Nos in each leaf (size of handle and hinge as directed), anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 147 | Supply & fixing anodised powder coatedaluminium shutter for window /Ventilator made out of aluminium section weighing 1.10 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles 2 Nos andaluminium hinges 04 Nos in each leaf (size of handle and hinge as directed) including peg stays as directed, anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 148 | Supply & fixing anodised powder coatedaluminium shutter for glass partition made out of aluminium section weighing 1.10 Kg/mtr, powder coated (minimum thickness of powder coating not less than 50 micron) including aluminium hardware i.e. necessary joining cleats, glazing clips, rubber neoprene packing, suitable size of aluminium handles, hinges (size of handle and hinge as directed) including neceesary arrangements as directed, anodised aluminium snap beading, screws etc including fixing of glass, complete all as specified and directed by Engineer-in-Charge.Note :- (i) Aluminium chowkhat frame shall be measured and paid separately under appropriate item of BOQ as supply and fixing. (ii) Glass and other filling material in panels shall be measured and paid separately under appropriate item of BOQ. |
| 149 | Supply and fixing anodised aluminium snap grid frame work of size of grid 605mm x 605mm for false ceiling including necessary notching and prepared holes, the snap grid shall consist of anodised aluminium main tee of size 36.5mm x 25mm x 1.4mm weighing 0.24 Kg/RM, cross and Intermediate tee of size 23.5mm x 26.4mm x 1.4mm weighing 0.191 Kg/RM. The main and cross tee shall be jointed at junction with steel screws or MS bolts, nuts and washers, the snap grid (main / cross tee sections) shall be supported at ends all along the wall with anodised aluminium angle of size 35mm x25mmx 2mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and duly suspended with 4mm GI wire hangers (upto 1200 mm length) adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long including providing 12mm thick gypsum board in grid fixed in false ceiling grid made of aluminium as per above specifications complete all as specified and as directed by Engineer-in-charge. |
| 150 | Supply and fixing 4 mm thick sheet glass ordinary quality and glazing with oil putty in squares exceeding 0.50 Sqm in each pane complete all as specified and as directed by Engineer-in-charge. |
| 151 | Supply and fixing in repairs 10 litres capacityPVCvalveless syphonic action type low level flushing cistern (white colour) with inlet, ball valve, float, handleincluding brackets and 32mm dia PVC flush pipe, PVC Connection 450 mm long with PTMT nuts suitable for 15mm bore pipe complete all as specified and directed by Engineer-in-Charge. |
| 152 | Supply & fixing in repair aluminium (extruded section) body door closer hydraulically regulated, designation No3, universal type suitable for door shutter of 851 to 1000mm in width and weight between 61 to 80 Kg, ISI marked complete all as specified & directed by Engineer-in-charge. |
| 153 | Supply and fixing solar control film 25 micron reflective type (greater sun control or equivalent) complete all as specified and directed by Engineer-in-Charge. |
| 154 | Supply and fixing in repair 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 155 | Supply and fixing in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball (polythene float) complete, screwed suitable for 20mm bore iron pipe complete all specified and as directed by Engineer-in-charge.Note :- The minimum weight of ball valve shall be as given in SSR or in relevant IS. |
| 156 | Supply & fixing in repair 150mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, complete all as specified and directed by Engineer-in-Charge. |
| 157 | Supply and fixing in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x460mm bowl size 410mm x330mm x160mm complete all as specified and as directed by Engineer-in-charge. |
| 158 | Supply and fixing in repalcement vitreous china bowl type Urinal, flat back type of size 315 mm x 300mm x 545mm, white including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and pointing around urinal back in cement, grating and union for discharge etc. completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incuding waste pipe and coupling and angle valve complete all as specified and as directed by Engineer-in-charge. Make : Jaguar CAT Part No : URS-WHT-13259 |
| 159 | Dismantling wall and ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness including cover fillets fixed in any position with nails fixed with screws complete all as specified and as directed by Engineer-in-charge. |
| 160 | supply and fixing in repair 19mm internal dia SS pipe drapery rod (Curtain Rod) of approved make including fenials and brackets for door and window including taking down old curtain rod and palmet box complete all as specified and directed by Engr-in-Charge |
| 161 | Supply & fixing in repair110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed by Engineer-in- charge. |
| 162 | Supply & fixing, factory made steel window/ventilator confirming to IS 1038 with side hung shutters including projecting type hinges, with steel handle, steel peg stay, complete, dovetailed welded, with one shop coat of zinc chromate primer without glazing bars including fixing of lugs in PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) including cutting holes for removal of old rusted hold fast and prepare the surface for new hold fast and making good disturbed area of walls and cills to match the existing surfces by bricks/ plastering works and painting work etccomplete all as specified & as directed by Engineer-in- charge. |
| 163 | EM SCHUDLE \"A\" |
| 164 | Taking down old unsv copper/aluminium point/submain wiring concealed / batten (light,fan, socket or power/submain) complete, including fixture and fittings suchasswitches,sockets,ceiling roses,bell push,bell electric,lamp holder,bulk head fitting, pendants, regulators, sockets, light fitting and any type switch board wooden/iron,round block etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc |
| 165 | Taking down old and unserviceable, distribution boardany type including , MCBs etc after removing all connection and make good the disturbed surface all as directed by Engr-in-charge. |
| 166 | M&L in replacementfor Sub main wiring with proper colour coding , insulated , unsheathed , multistranded ,copper conductor FRLS, cable of 2 run 6 Sqrmm for phase and neutral and one run of 4.0 Sqrmm for earth wire unsheathed , miltistranded , copper conductor FRLS, drawn through the existing rigid PVC concealed conduit fixed on wall. Two runs of cable for phase/neutral and one run of cable for earth will be measured and paid as one unit length. Note : Wiring shall be done in proper colour coding. |
| 167 | M&L for point wiring for one light/fan/5 Amps independent socket point/call bellpoint controlled by one 5 Amp switch with 1.5 Sqmm single core multistranded copper conductor FRLS, PVC insulated (unsheathed) heavy duty cable including continuous earth wire of size 1.5 sqmm copper conductormultistrand FRLS,PVC insulated (unsheathed) drawn into an including new concealed PVC rigid/steel conduit 1.8mm wall thicknessISI marked terminated into CI/pressed steel terminal boxes including 3.00mm thick hylam brand IS-2036 marked, laminated sheet cover for mounting switches, sockets, fan regulators etc complete all as specified. Note : (a) wiring shall be done by using proper colour coding(b) Earth wire shall be of green colour (c) On RCC roof/celing PVC conduit shall be provided on surface with proper fixing clips all as directed by Engr-in-Charge. |
| 168 | All as per item No 166.00 above but for multi 5 pin 5 amp socket outlet on same board |
| 169 | All as per item No 166.00 above but for multi 5 pin socket outlet 5 amp socketon independent board |
| 170 | All as per item No 166.00 above but for One bell/buzzer point controlled by one push button on the same board with other switches or independent with cable 1.5 Sq. mm size |
| 171 | All as per item No 166.00 above but for multi 6 pin 15 Amp socket outlet independent controlled by 15 Amp switch with 2.5 sqmm copper conductor multistrand cable pvc insulated FRLS and unsheathed cable in and including PVC rigid concealed conduit 20/25 mm dia and unsteathed copper conductor multistrand cable 1.5 sqmm as earth wire FRLS pvc insulated in green color all as directed by engr-in-charge.complete with new CI/pressed steel sunken black with hylum top sheet cover 3mm thick |
| 172 | S & F in replacement Socket outlet 5 Pin, 5A, flush type complete all as directed |
| 173 | S&F in replacement of angle/batten lamp holder on PVC square Blocks with PVC insulated body complete all as directed |
| 174 | M& L in replacement Self ballast LED retrofit Lamp with PVC body and PC Diffuser 9 watt 230 Volt 6500K Complete all as directed. |
| 175 | S&F in replacement forswitch piano, flush type single pole one way 5 Amp, 240 volts all as specified . |
| 176 | S & F forbell push , flush type single pole , 5 Amp, 240 volts all as specified . |
| 177 | M&L switch piano flush button single pole one way 15 Amp all as specified |
| 178 | M&L socket outlet 6 pin 15 Amp 240 volt multi purpose flush typeall as specified |
| 179 | S&F in replacementCalling bell Ding Dong/buzzer AC 230 Volts, single pole. |
| 180 | S&F in replacement Stepped type electronic fan regulator flush type on the existing phenolic laminated sheet. |
| 181 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor and taking down old fan and deposit to MES store all as directed. |
| 182 | M&L for replacement distribution boardsheet steel phosphatised powder coatedfor MCB with copper bus bar and neutral link earthing stud SPN 12 way 240 volts double door complete all as directed by Engr-in-Charge. |
| 183 | S&F ceiling rose, 3Phase/PVC/polycarbonate isolated body |
| 184 | S&F in replacementnew generation energy saving ,wall mounted LED Tube lightbatten fittings , extruded aluminum heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED duly fitted on pvc square block 6500K (4\" ft long ) with LED rod 20 watt, 230 Volts 50 Hz. |
| 185 | S&F in replacement MCB single pole and Neutral 32 Amp suitable for 240 volt. |
| 186 | S&F in replacement MCB single pole and Neutral 40-50 Amp suitable for 240 volt. |
| 187 | S&F in replacement MCB single pole 5-32 Amp suitable for 240 volt. |
| 188 | S&F in replacement MCCB 4 pole, 415 Volt fixed thermal and fixed maganatic setting of cap 125 Amps 16 KA |
| 189 | S&F in replacement of Vertical Distribution Board (TP&N) 4 way double door suitable forMCCB 125 Amp 16 KA four pole as incomer and out going MCBs and should be IP 43 protected with Copper BusBars, Neutral Links, Earthing bar all as specified and directed. including taking down old UNSV DB/MCB any type. |
| 190 | M&L for Earthing complete with galvanised steel earth plate electrode 60x60cmx6.3mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 191 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 192 | M & L for LED Mirror light fitting of 9/10 watt, 6000 K ,lineer & compact with decorative grey end caps,polycarbonate body and ribbed opal diffuser complete with lamp and all other accessories fitting arrangement including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector allas specified and directed. |
| 193 | Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at groung/First/Scond floor including plastering for making good to the original surfaces of any description disturbed including painting /distemper matching with the existing colour.Note : Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site. |
| 194 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louverscomplete with louver shutter including fixing rawl plug/nut & bolts. |
| 195 | Supply & installed Water heater storage type (Geyser) star rating, confirming to ISI complete, capacity 25 Ltrs geysers. |
| 196 | Labor for fixing of 4 Nos rawl plug of suitable size (4\"-6\") nuts & bolts, grouting work in RCC/Brick wall, cemented works labour charges for cutting to exisiting GI pipe line of size 15 mm dia in position for insertion of tee or branch connection jointing complete with necessary GI fittngs, plumbing work all as per site requirement. |
| 197 | Supply and fixing (concealed in wall or as directed) single pole and neutral sheet metal enclosure (Geyser Box) with a two pin and earth plug and socket complete with one single pole MCB of capacity 25 Amps, 240 volts, AC supply complete all as specified and directed by Engineer-in-Charge. |
| 198 | M & L for replacement of tubing GI \"MG\" with all fittings laid in floor or trenches including taking out old UNSV pipe of size 15 mm dia complete all as specified and directed |
| 199 | S&F Stop valves, cast copper alloy, screwed down, high pressure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia of pipe. |
| 200 | S&F PVC connection of size 15 mm dia with PTMT nuts of length 450 mm long (hot series braded, threaded and cold series) complete all as directed by Engr-in-Charge. Make: Prayag |
| 201 | S&F Bib tape cast copper alloy with crutch or butterfly handle screwed down , screwed for iron pipe for brass ferrule of size 15 mm bore. Make: Prayag |
| 202 | Labor for cutting to existing GI pipe of size 25/20 mm dia in position for addition/alteration or insertion of TEE for branch connection complete with cutting, threading and jointing/fixing including GI fitting as per site requirement |
| 203 | Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and making good Bottom surface for laying / removing of cable all as specified and directe in hard soil |
| 204 | S&L and testing cable XLPE Insulated screened PVC bedded galvanised steel strip or wire armoured, electric power cable (Heavy duty) with stranded aluminium conductor 1100 V grade cross sectional area 70 Sqmm, 3.5 core in and incl taking out old one all as specified and directed. |
| 205 | M&LSand filling in cushing bed of cableand consolidation complete as specified |
| 206 | Supply and laying comman burnt clay building sub class `B\" bricks, laid over sand Cushioning laid at right angle along with cable, all as specified and as directed. |
| 207 | Returning filling in excavated soil in trenches, watering and well ramming in layers n exc 25cm complete all as specified |
| 208 | Remove of excavated any type of soil to distance n exc 50m all as specified and directed |
| 209 | S&L GI tubing light graded incl all accessories for encasing cables for mechanical protection, laid under plinth/floors/path culverts with complete accessories such as bends/sockets/reducers/saddles incl necessary threading/drilling works all as specified and directed of sizes (MS work will be measured under separate item in schedule) 40 mm |
| 210 | S&F Lamp holder PVC/polycarbonate type with back plate suitable for batten fitting with LED bulb 9W |
| 211 | S&F Supply and fixing in replacement of LED lights fitting 1x 20W, 220V,AC decorative box type with driver,onnecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 212 | S&F Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 213 | S&Fin replacement of sheet metal encousers made out of CRCA mild steel sheet, double door, powder coated DB SPN 8 way 240 Volt, 200 AMP rated bus bar, dust and vermin proof suitable for incorporation of MCB\"s and isolators etc complete all as specified |
| 214 | M&L for sub mainwiring complete with two single core 6 sqmm, 1100 volts grade PVC insulated, multistranded copper conductor FRLSH cable (ISI marked) in and including PVC concealed conduit (medium quality ISI marked) and cutting of chases in wall including 6 sqmm single core copper earth wire to common earth and connecting to earth dolly complete all as specified. |
| 215 | M&L forsub wiring complete with two single core 4 sqmm, 1100 volts grade PVC insulated, multistranded copper conductor FRLSH cable (ISI marked) in and including PVC concealed conduit (medium quality ISI marked) and cutting of chases in wall including 6 sqmm single core copper earth wire to common earth and connecting to earth dolly complete all as specified. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
