|
| 1 | Third FloorR.C.C. work with M-20 grade In Different RCC Works having minimum compressive strength in work test of 200 Kg/Cm²in 15cm cubes at 28 days after mixing and texts conducted in accordance with relevance IS code using20 mm and downgraded size black hard granite crusher brokenstone chips and screened and washed sharp river sand of approved quality and from approved quarry including hoisting lowering and laying concrete and compacting by using vibrator, watering, curing for 28 days, including cost of centering & shuttering and finishing the exposed surface smooth providing grooves or beads where necessaryincluding cost, conveyance, royalty of all materials , cost of all labour, labour CESS T&P etc. required for complete the workin all respect but excluding cost and conveyance of M.S. rods or Tor steel & binding wires and labour charges for strengthening, cutting, bending grills and placing in proper position as per the direction of the Engineer-in-Charge. |
| 2 | Supplying, fitting and placing uncoated SeQR TMT barreinforcement including straightening bent up or coiled rods, cutting, bending, cranking, hooking, welding or jointing (if required)andbinding, tyingand placingin proper position as required for RCC works includingcost, conveyance ofsteel and binding wires of18 to 20 gauge and cost of all labour, labour CESST&Petc. required for complete the workin all respect as per drawing and technical specification and directed by the Engineer-in-charge.(Weight of reinforcement shall be calculated on the basis of IS 1732, wastage ,overlaps, couplings, welded joints ,spacer bars, chairs, stays, and annealed steel wire or other method of binding &placing shall not be considered for payment). |
| 3 | Supplying, fitting, fabricating and placing in position MSTrusses, Posts,etc completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 4 | Supplying fitting fixing precoatedsemigloss G.I. sheet 0.5 mm thicks etc. completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 5 | Providing fitting fixing MS Gates made out of ms angles andflats including cost of fabricationall labour, conveyance, loading, unloading, T&P, etc, completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 6 | Painting 2 (Two) coats with synthetic enamel paintto iron work over a coat of primer of approved colour, shade after sand papering , polishing the surface including cost, conveyance of all materials,all labour, labour CESS T&P , scaffoldingetc. required to complete the work in all respect as per drawing and technical specification anddirection of Engineer-in-Charge. |
| 7 | Providing ,Supplying fitting and fixing of Polished Vitrified floor tiles of premium grade having thickness 8mm to 10mm confirming to IS 15622:2006 (Group-B la) of size600mm x 600mm, Plain Ivory, in floors and treads on steps and landing on 20mm thick bed of cement mortar 1:4(1 cement : 4 screened and washed river sand ) jointed with neat white cementmixed with pigment to match he shades of the tiles ,curing for required days , including cost of pre cast tiles , cost , conveyance , royalty of all materials,cost of all labour , labour CESS and T&P required to complete the workin all respect as per specification and direction of Engineer-in-charge. |
| 8 | Fly ashbrick masonry in cement mortar (1:6) in Super structureusing Fly ash bricks of (23x11x8cm) size having a crushing strength of not less than 75 kg per Sq.cm with dimensional tolerance + 8 percent after immersing Bricks in water till saturation before use , including splays cutting, circular molding, chamfering, corbelling and all similar type of operations with all necessary projectionswatering, curing etc. complete including cost, conveyance, royalties,of all materials, cost of all labour, labour CESS T&P ,Scaffolding as required etc. complete in all respect asdrawing and technical specifications and as per directed by the Engineer-in-charge. |
| 9 | Providing 12 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 10 | Providing 16 mm thick cement plaster with cement mortar (1:6) with screened and washed sharp river sand for mortar and finished smooth to the rough surface of walls after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials, cost of all labour, Labour CESS,T&P, and scaffolding as requiredto completethe workin all respectas per the Direction of the Engineer-in-charge . |
| 11 | Providing & painting exterior surfaces of walls with two coatsofWeather seal coat paint ofapproved quality and shade from a recognized companyto give an even shade, after cleaning the plastered surface perfectly by watering and brushing including cost of scaffolding ,stagingand cost ,conveyance of all materials ,all labour, labour CESSand T&P required to complete the work in all respectas per specification anddirection of the Engineer-in-charge. |
