}
  • Home   ›
  •   Indian Tenders   › Tender Notice : 43098670

    • Tender For Increasing Capacity Of Transformer Under Edc-Kushinagar, kushinagar-Uttar Pradesh

    Purvanchal Vidyut Vitaran Nigam Limited has published Tender For Increasing Capacity Of Transformer Under Edc-Kushinagar. Submission Date for this Tender is 09-04-2024. Transformer Supply Tenders in kushinagar Uttar Pradesh. Bidders can get complete Tender details and download the document.




    Tender Notice

    43098670
    Tender For Increasing Capacity Of Transformer Under Edc-Kushinagar
    Open Tender
    Indian
    Uttar Pradesh
    kushinagar
    09-04-2024

    Tender Details

    Tender For Increasing Capacity Of Transformer Under Edc-Kushinagar

    Key Value

    Document Fees
    INR 3540 /-
    EMD
    INR 51000.0 /-
    Tender Value
    Refer document

    BOQ Items

    Name of Work: fo|qr ek/;fed dk;Z [k.M] xksj[kiqj ds {ks=kUrxZr fctusl Iyku o"kZ 2024&25 ¼Qst&II½ ds vUrxZr 33@11 ds0oh0 fo|qr midsUnz eFkkSyh ¼1x5,e0oh0,0 ls 2x5,e0oh0,0½ tuin&dq”khuxj dh {kerko``f) dk dk;Z ¼2½ 33@11 ds0oh0 fo|qr midsUnz iMjkSuk ¼8$10 ,e0oh0,0 ls 2x10 ,e0oh0,0½ tuin&dq”khuxj dh {kerko``f) dk dk;Z ¼3½ 33@11 ds0oh0 fo|qr midsUnz xksikyx<- ¼2x5,e0oh0,0 ls 10+5 ,e0oh0,0½ tuin&dq”khuxj dh {kerko``f) dk dk;Z rFkk ¼4½ 33@11 ds0oh0 fo|qr midsUnz [kM~Mk dh {kerko``f) ¼2x5,e0oh0,0 ls 10+5 ,e0oh0,0½ tuin&xksj[kiqj dk dk;Z lseh VuZdh vk/kkj ijA
    Sl. No. Item Description
    1Work No-1 Part-A(Materials Provided by contractor)
    2Main bus bar complete with structure
    3Terminal Gantry
    433 KV. Polymer Disc Insulator B&S
    533 KV Disc Fitting for Dog.
    6P.G. clamp for Dog conductor.
    733 KV. Top channel for cable stand & neutral earthing
    811 KV C/J Kit 3X185 mm² XLPE Indoor
    911 KV C/J Kit 3X185 mm² XLPE Outdoor
    1011 KV C/J Kit 3X300 mm² XLPE Indoor
    1111 KV C/J Kit 3X300 mm² XLPE Outdoor
    1233 KV C/J Kit 3X300 mm² XLPE Outdoor
    13Battery charger with 24 Volt battery with cabinet (As per Instruction of Supervision Authority)
    14Armoured copper control cable 2 x 2.5 mm2
    15Armoured copper control cable 4 x 2.5 mm2
    16PART - B- WORK Shifting & loading of following materials on private truck at store centre Padrauna & carriage up to 33/11 KV Sub-Station Mathauli Distt-Kushinagar & Un-loading of the same with proper stacking (Distance about 0 to 60 km)
    1733/11 KV ‘XLPE’ power cable.
    1811 KV Switchgear panels(I/C)
    1933 KV ‘VCB’ complete with all structure.
    2033 KV. C.T. with all structure.
    2133 KV Bus Type Isolator with all structure.
    2233 KV Line Isolator with all structure.
    2333 KV control Pannelwith all structure.
    2433 KV lightening arrester with all structure.
    2533 KV fuse set with structure
    2633 KV Post insulatorwith all structure.
    2711 KV Switchgear panels(O/G)
    28ACSR Dog conductor
    2933 KV PT with Structure
    30ST Pole 11 M Long
    3190lb, Rail pieces for T/F for transformer ( 44.64 Kg /Mtr)
    32MS angle 2.6 M
    3311 KV DP Material
    34S.T. Pole 9 M long.
    35M.S Angle cross bracing
    36Top Channel 100x50x2240mm
    37Clamps with nut bolt
    38extra support angle for cable support
    39clamp for extra angle
    40Number Plate with clamps.
    41Danger Board with Clamps.
    42Barbed wire.
    43Allumunium Paint.
    44Bolts, Nuts, & Washers.
    45Red Oxide Paint.
    46Stay complete (with Stay clamp and stay wire)
    47Earthing complete
    48Construction of power transformer plinth for 5 MVA transformer of size 3.5 x 3.5 x 1.5 mtr. including cost of all material as per drawing.
    49Earthing of 5 MVA power transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.
    50Jointing charges of 11 KV “XLPE” C/J kit 3x300/185mm2 indoor/Outdoor type
    51Neutral earthing of 5 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 20’ long and other earthing materials.
    52Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 5 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
    53Grouting of M.S. channel 3.2 mtr long for cable stand and welding of M.S. flat (3 Nos.) at equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
    54Installation of 33 KV control panel for “VCB” with complete earthing with installation of battery and battery charger in control room and making connection.
    55Laying of 11 KV “XLPE” power cable 3 x 300 mm2 / 185 mm2 including digging of pits of xize 0.5 x 0.5 mtr. covering of cable with sand and 1st class brick around the cable.
    56Laying of 33 KV “XLPE” power cable 3 x 300 mm2 including digging of pits of xize1.0 x1.0 mtr. covering of cable with sand and 1st class brick around the cable.
    57Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
    58Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
    59Testing of 11 KV switchgear panel in all respect.
    60laying control cable from switchyard to control room 33 KV panel by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete and including cost of laying.
    612 x 2.5 mm2
    624 x 2.5 mm2
    63Erection and grouting of “VCB” Structure mounting and fitting of “VCB” on erected structure with complete earthing.
    64Erection and groutingof following structure.
    6533 KV Bus Isolator structure
    6633 KV Line Isolator structure
    6733 KV fuse set structure
    6833 KV Post insulator structure
    6933 KV L.A. structure
    7033 KV PT Structure
    7133 KV CT Struture
    72Installationof following Equipments on erected structure
    7333 KV Bus Isolator
    7433 KV Lines Isolator
    7533 KV fuse set ( Providing Copper strip as required size for 33 KV fuse set)
    7633 KV Post insulator
    7733 KV L.A.
    7833 KV PT
    7933 KV CT
    80Rubber Mat(Provided by Contractor)
    81Painting of S/S Structure & equipments
    82Earthing of S/sOutdoor equipments (earthmat)
    83Earthing of Indoor equipments
    84Earhing of outdoor and indoor type switchyard earthing for newly erected structure as per proper specification with GI Earthing strip.
    85Painting of newly erected structure in switchyard (Applying on coat of good quality red oxide primer then two coat of good quality of high class luxol aluminium paint)
    86Charges For Cartage & Erection terminal Gantry,Making Bus-Bar & All Related complete work
    87Construction of approach road inside the switchyard 1.5 Mtr. wide with 1st class bricks on edge soling and tipping complete work including cost of all materials.
    88Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .
    89Work No-2 Part-A(Materials Provided by contractor)
    903x300 mm² XLPE Cable C/J Kit indoor
    913x300 mm² XLPE Cable C/J Kit outdoor
    923x185 mm² XLPE Cable C/J Kit indoor
    933x185 mm² XLPE Cable C/J Kit outdoor
    94Battery charger with 24 Volt battery with cabinet (As per Instruction of Supervision Authority)
    95Armoured copper control cable 2 x 2.5 mm2
    96Armoured copper control cable 4 x 2.5 mm2
    9733 KV. Top channel for cable stand & neutral earthing
    9833 KV PG clamp for Dog for jumpering of Busbar connection
    9911 KV DP Material
    100S.T. Pole 11 M long.
    101M.S Angle cross bracing
    102Top Channel 100x50x2240mm
    103Clamps with nut bolt
    104extra support angle for cable support
    105clamp for extra angle
    106Number Plate with clamps.
    107Danger Board with Clamps.
    108Barbed wire.
    109Allumunium Paint.
    110Bolts, Nuts, & Washers.
    111Red Oxide Paint.
    112Stay complete (with Stay clamp and stay wire)
    113Earthing complete
    114PART - B- WORK Shifting & loading of following materials on private truck at store centre Padrauna & carriage up to 33/11 KV Sub-StationPadrauna Distt-Gorakhpur & Un-loading of the same with proper stacking (Distance about 0 to 100 Mtr.)
    115ST Pole 11Mtr.
    11611 KV ‘XLPE’ Power cable.
    117ACSR Dog conductor
    11833 KV Control panel for Single Transformer
    11933 KV VCB, 750MVAwith Structure
    12033KV C.T.400/200/1A
    12133 kV PT
    12233 KV Line Isolator
    12333 KV Lightening Arrester
    12433 KV Post Insulator
    12533 KV fuse set with structure
    12611 KV Switchgear Incoming 600/300/5A, 350 MVA
    12711 KV Switchgear Outgoing 200/100/5A
    12833 KVBus Isolator
    12911 KV Bus coupler
    130Repairing of plinth and foundation for 10 MVA transformer as per requirement. Dismantling of T/F all fitting& connection, Rail pieces and T/F shifting to another place by crane.
    131Installation and mounting of VCB with complete connection of 33 KV VCB
    132Dismantling of Bus bar Jumpers,different earthings of existing 5 MVA T/F.etc. complete work and restringing of all connection.
    133Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
    134Laying of 11 KV “XLPE” cable 3 x 300/185 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
    135Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
    136Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
    137Grouting of M.S. channel 3.2 mtr longfor cable stand and welding of M.S. flatat equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
    138Jointing charges of 11 KV “XLPE” C/J kit 3x300/185 mm2 indoor/outdoor.
    139Dismantling of existing pale fencing and resetting after completion of trnasformer work.
    140Mounting, Installation and complete connection and earthing of 33 KV C.T.
    141Installation of 33 KV PT, wiring and earthing with complete work.
    142Installation of 33 KV control panel, wiring with complete earthing and respectively conection with battery and battery charger in control room.
    143Installation of 33 KV fuse setwiring and earthing with complete work.
    144Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
    145Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
    146Testing and commisssioning of 33/11 KV switchgear panel in all respect.
    147Installation of 33 KV Post insulatorwiring and earthing with complete work.
    148Mounting, Installation and complete connection and earthing of 33 KV C.T.
    1492 x 2.5 mm2
    1504 x 2.5 mm2
    151Indoor equipment earthing
    152Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .
    153Painting of erected structure in switchyard.
    154Work No-3 Part-A(Materials Provided by contractor)
    1553x300 mm² XLPE Cable C/J Kit indoor
    1563x300 mm² XLPE Cable C/J Kit outdoor
    1573x185 mm² XLPE Cable C/J Kit indoor
    1583x185 mm² XLPE Cable C/J Kit outdoor
    159Battery charger with 24 Volt battery with cabinet (As per Instruction of Supervision Authority)
    160Armoured copper control cable 2 x 2.5 mm2
    161Armoured copper control cable 4 x 2.5 mm2
    16233 KV. Top channel for cable stand & neutral earthing
    16333 KV PG clamp for Dog for jumpering of Busbar connection
    164PART - B- WORK Shifting & loading of following materials on private truck at store centre Padrauna & carriage up to 33/11 KV Sub-Station Gopalgarh Distt-Kushinagar & Un-loading of the same with proper stacking (Distance about 0 to 50 km)
    16511 KV ‘XLPE’ Power cable.
    166ACSR Dog conductor
    16733 KV Control panel for Double Transformer
    16833KV C.T.400/200/1A
    16933 KV VCB, 750MVA with Structure
    17033 kV PT
    17111 KV Bus coupler
    17233 KV Bus Isolator
    17333 KV Lightening Arrester
    17433 KV Post Insulator
    17533 KV fuse set with structure
    17611 KV Switchgear Incoming 600/300/5A, 350 MVA
    17711 KV Switchgear Outgoing 200/100/5A
    178Repairing of plinth and foundation for 10 MVA transformer as per requirement. Dismantling of T/F all fitting& connection, Rail pieces and T/F shifting to another place by crane.
    179Installation and mounting of VCB with complete connection of 33 KV VCB
    180Dismantling of Bus bar Jumpers,different earthings of existing 5 MVA T/F.etc. complete work and restringing of all connection.
    181Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
    182Laying of 11 KV “XLPE” cable 3 x 300 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
    183Mounting, Installation and complete connection and earthing of 33 KV C.T.
    184Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
    185Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
    186Grouting of M.S. channel 3.2 mtr longfor cable stand and welding of M.S. flatat equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
    187Jointing charges of 11 KV “XLPE” C/J kit 3x300/185 mm2 indoor/outdoor.
    188Dismantling of existing pale fencing and resetting after completion of trnasformer work.
    189Installation of 33 KV PT, wiring and earthing with complete work.
    190Installation of 33 KV control panel, wiring with complete earthing and respectively conection with battery and battery charger in control room.
    191Installation of 33 KV fuse setwiring and earthing with complete work.
    192Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
    193Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
    194Testing and commisssioning of 33/11 KV switchgear panel in all respect.
    195Installation of 33 KV Post insulatorwiring and earthing with complete work.
    196Laying from switchyard to control room for 33 KV panel, CT and 10 MVA T/F by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete .
    1972 x 2.5 mm2
    1984 x 2.5 mm2
    199Indoor equipment earthing
    200Painting oferected structure in switchyard.
    201Work No-4 Part-A(Materials Provided by contractor)
    2023x300 mm² XLPE Cable C/J Kit indoor
    2033x300 mm² XLPE Cable C/J Kit outdoor
    2043x185 mm² XLPE Cable C/J Kit indoor
    2053x185 mm² XLPE Cable C/J Kit outdoor
    206Battery charger with 24 Volt battery with cabinet (As per Instruction of Supervision Authority)
    20733 KV. Top channel for cable stand & neutral earthing
    20833 KV PG clamp for Dog for jumpering of Busbar connection
    209Armoured copper control cable 2 x 2.5 mm2
    210Armoured copper control cable 4 x 2.5 mm2
    21111 KV DP Material
    212S.T. Pole 11 M long.
    213M.S Angle cross bracing
    214Top Channel 100x50x2240mm
    215Clamps with nut bolt
    216extra support angle for cable support
    217clamp for extra angle
    218Number Plate with clamps.
    219Danger Board with Clamps.
    220Barbed wire.
    221Allumunium Paint.
    222Bolts, Nuts, & Washers.
    223Red Oxide Paint.
    224Stay complete (with Stay clamp and stay wire)
    225Earthing complete
    226PART - B- WORK Shifting & loading of following materials on private truck at store centre Padrauna & carriage up to 33/11 KV Sub-Station Khadda Distt-Kushinagar & Un-loading of the same with proper stacking (Distance about 0 to 50 km)
    22711 KV ‘XLPE’ Power cable.
    228ACSR Dog conductor
    22933 KV Control panel for Single Transformer
    23033 KV VCB, 750MVA
    23133 kV PT
    23233 KV Line Isolator
    23333 KV Lightening Arrester
    234ST pole 11 M
    23533 KV Post Insulator
    23633 KV fuse set with structure
    23711 KV Switchgear Incoming 600/300/5A, 350 MVA
    23811 KV Switchgear Outgoing 200/100/5A
    23933 KVBus Isolator
    24011 KV Bus coupler
    241Repairing of plinth and foundation for 10 MVA transformer as per requirement. Dismantling of T/F all fitting& connection, Rail pieces and T/F shifting to another place by crane.
    242Installation and mounting of VCB with complete connection of 33 KV VCB
    243Dismantling of Bus bar Jumpers,different earthings of existing 5 MVA T/F.etc. complete work and restringing of all connection.
    244Transformer body earthing at two places including cost of G.I. strip, G.I. pipe and other earthing materials required.(delta type)
    245Laying of 11 KV “XLPE” cable 3 x 300/185 mm2 including digging of pits of size 0.5 x 0.5 mtr. covering of cable with sand and 1st class bricks around and top of the cable.
    246Neutral earthing of 10 MVA transformer complete including cost of G.I. strip, G.I. pipe 1.5” dia 30’ long and other earthing materials.(delta type)
    247Grouting of M.S. Channel 3.2 mtr. long for neutral earthing support of 10 MVA transformer with help of G.I. strip 50 x 6 mm and copper flexible bond etc.
    248Grouting of M.S. channel 3.2 mtr longfor cable stand and welding of M.S. flatat equal distance for fastening cable by clamp with nuts and bolts mounting of cable at cable stand and connection of jumpers.
    249Jointing charges of 11 KV “XLPE” C/J kit 3x300/185 mm2 indoor/outdoor.
    250Dismantling of existing pale fencing and resetting after completion of trnasformer work.
    251Installation of 33 KV PT, wiring and earthing with complete work.
    252Installation of 33 KV control panel, wiring with complete earthing and respectively conection with battery and battery charger in control room.
    253Installation of 33 KV fuse setwiring and earthing with complete work.
    254Shifting of 11 KV switchgear to control room and placing in control room with grouting of bolts and mounting of switchgear panels properly.
    255Electrical connection of 11 KV switchgear panel and fitting of Bus Bar and P.T.
    256Testing and commisssioning of 33/11 KV switchgear panel in all respect.
    257Installation of 33 KV Post insulatorwiring and earthing with complete work.
    258Erection of Double pole structure on 11 mtr ST Pole for Composite line (11 KVone side overhead and one side cable rising) including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for(M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp,Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .
    259Laying from switchyard to control room for 33 KV panel, CT and 10 MVA T/F by digging trench in switchyard including cost of sand and 1st class bricks with covering and making connection complete .
    2602 x 2.5 mm2
    2614 x 2.5 mm2
    262Erection of Double pole structure on 11 mtr ST Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .
    263Painting oferected structure in switchyard.
    Disclaimer :
    We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
    Tell us about your Product / Services,
    We will Find Tenders for you
    Cnet Technologies

    We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.

    About Us

    Services

    Browse Tenders

    For Sales Inquiry

    Connect With Us

    Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

    For Tender Information Services Visit : TenderDetail