Public Works Department-PWD has published Construction Of Residential Buildings, 2 Nos Of Ty- I And 2 Nos. Of Ty-Iii For Staffs Of District Administration At Sarli Co Hqr, Kuring Kumey District. Submission Date for this Tender is 08-04-2024. Building Work Tenders in Kurung Kumey Arunachal Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Type I=2.00 Nos. |
2 | SITE DEVELOPMENT:Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto1.50 m. |
3 | MAIN BUILDING |
4 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
5 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
6 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
7 | Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
8 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5mm nominal size). |
9 | Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by manufacturers. |
10 | Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
11 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
12 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth an |
13 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surfac 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
14 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to M20 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
15 | Centring and shuttering including strutting, propping etc and removal of form work for : Foundation, footings, bases of columns etc. and mass concrete. |
16 | Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
17 | Lintels, beams, girders, bressumers and cantilevers etc. |
18 | Column, pillars, posts and struts etc. |
19 | Reinforcement of RCC work including bending, binding and placing in position complete. Cold twisted bars. |
20 | Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand). |
21 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
22 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. |
23 | Extra for brick masonry in superstructure above plinth level up to floor two level. |
24 | Providing approved best available local wood (Class - B II) work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position. |
25 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
26 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws. 38 mm thick best available local wood, class - B I |
27 | Providing and fixing 38 mm thick wire gauge shutters using galvanized mild steel wire gauge of IS gauge designation 140G with wire of dia 0.56 mm for doors, windows and clerestory windows including anodized aluminum butt hinges with necessary screws. |
28 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws. 35 mm thick |
29 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal |
30 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. Plain grill. |
31 | Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete. 300 x 16 mm |
32 | Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete. 250 x 10 mm |
33 | 200 x 10 mm |
34 | Providing and fixing MS handles with necessary screws etc complete. 125 mm |
35 | 100 mm |
36 | Providing and fixing MS Hooks and Eyes. 200 mm |
37 | Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessary mouldings etc. |
38 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
39 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
40 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. 40 mm thick |
41 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor. 18 mm thick |
42 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
43 | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. 0.63 mm thick GI sheet |
44 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.63 mm thick GI sheet |
45 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
46 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. Best local approved quality wood. |
47 | Extra for making chamfered edges of beading. |
48 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
49 | 15 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall. |
50 | Neat cement punning. |
51 | White washing with lime on new work (two or more coats) to give an even shade. |
52 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade. |
53 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
54 | Painting two coats with oil type wood preservative of approved brand and manufacture on new work. |
55 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
56 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
57 | Applying priming coat with ready mixed genuine red lead paint ofapproved brand and manufacture on steel work. |
58 | Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white, grey or green shades on new work to give an even shade. |
59 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
60 | Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar |
61 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm |
62 | Providing laying and jointing glazed stone ware pipe grade "A" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150 mm dia SW pipes |
63 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design. 150 mm dia SW pipes |
64 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement : 5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse |
65 | Construction of soak pit 1.2 x 1.1 x 1.2 m filled with brick bats including SW drain pipe 100 mm dia and 1.20 m long complete as per standard design. |
66 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). 15 mm nominal bore |
67 | 20 mm nominal bore |
68 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). 20 mm nominal bore |
69 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
70 | Providing and fixing brass stop cock of approved quality. 15 mm nominal bore |
71 | Providing and fixing PVC connection pipe with brass union. 45 cm length 15 mm nominal bore |
72 | Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet. 150 mm dia |
73 | Providing and fixing ball valve (brass) of approved quality complete. Low pressure with copper floats 20 mm nominal bore |
74 | Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work. 15 mm dia pipe |
75 | Providing and filling sand all round GI pipes in external work. 20 mm dia pipe |
76 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvan Orissa Pattern WC Pan |
77 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
78 | Providing and fixing kitchen sink including making all connection excluding cost of fittings. |
79 | Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins. |
80 | Providing and fixing CP brass waste for wash basins and sinks. 32 mm dia |
81 | Providing and fixing MI fisher union for wash basin and sinks. 32 mm dia |
82 | Providing and fixing CP Brass or MI trap for wash basin and sinks. 32 mm dia |
83 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap. |
84 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
85 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. |
86 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). 750 x 20 mm size |
87 | Providing and fixing sand cast iron cast/iron (spun) soil, waste and vent pipes. 100 mm dia |
88 | 50 mm dia |
89 | Providing and fixing sand cast iron heel rest sanitary bend. 100 mm dia |
90 | 1.20 m high welded steel wire fencing with 1.80 m RCC posts of standard design placed at every 3 m apart embedded in cement concrete blocks 45 x 45 x 60 cm of mix 1 : 5 : 10(1 cement : 5 fine sand : 10 stone aggt. 40 mm nominal size), corner end and every 10th post to be strutted and embedded in cement concrete blocks of 70 x 45 x 50 cm of same mix provided with welded steel wire fabric 0.90 m wide, rectangular mesh 75 x 25 mm size weighing not less than 7.75 kg per Sq.m. fixed between the two posts fitted and fixed with GI staples on wooden plugs or tied to 6 mm bar nibs with binding wire including earth work in excavation, concrete work and cost of posts, struts etc complete. |
91 | Providing and fixing of steel gate. |
92 | Furnitures |
93 | Wooden Cots |
94 | Plastic ArmChair |
95 | Water filter (10.00 litter Capacity ) |
96 | Meat Safe |
97 | Wooden Almirah |
98 | Type III=2.00 Nos. |
99 | SITE DEVELOPMENT:Earth work in excavation in soils containing 50% or more of shingle or small size boulders upto 30 cm size including banking in 20 cm layers and breaking clods, ramming and dressing up for the purpose of making embankments or filling up ground depressions lead upto 50 m and lift upto1.50 m. |
100 | MAIN BUILDING |
101 | Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, intoplinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m. |
102 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete. |
103 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
104 | Providing and laying in foundations and plinth cement concrete 1 : 5 : 10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering. |
105 | Providing and laying damp proof course 38 mm thick with cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 12.5mm nominal size). |
106 | Extra for providing and mixing water proofing material in cement concrete work in the proportion recommended by manufacturers. |
107 | Applying a coat of hot bitumen (mashphalte 80/100 or equivalent) using 1.70 Kg per Sq.m. on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. |
108 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcementin : 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
109 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth an |
110 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surfac 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
111 | Reinforcement cement concrete work in columns, pillars, piers, abutments, post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to M20 1 : 1.5 : 3 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
112 | Centring and shuttering including strutting, propping etc and removal of form work for : Foundation, footings, bases of columns etc. and mass concrete. |
113 | Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height). |
114 | Lintels, beams, girders, bressumers and cantilevers etc. |
115 | Column, pillars, posts and struts etc. |
116 | Reinforcement of RCC work including bending, binding and placing in position complete. Cold twisted bars. |
117 | Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand). |
118 | Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level. |
119 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. |
120 | Extra for brick masonry in superstructure above plinth level up to floor two level. |
121 | Providing approved best available local wood (Class - B II) work in frames of doors, window, clerestory windows and other frames, wrought framed and fixed in position. |
122 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
123 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws. 38 mm thick best available local wood, class - B I |
124 | Providing and fixing 38 mm thick wire gauge shutters using galvanized mild steel wire gauge of IS gauge designation 140G with wire of dia 0.56 mm for doors, windows and clerestory windows including anodized aluminum butt hinges with necessary screws. |
125 | Providing and fixing best available local wood glazed shutters for doors, windows and clerestory window using 7.5 kg/Sq.m. (3 mm thick glass panes) including black enamelled MS butt hinges with necessary screws. 35 mm thick |
126 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal |
127 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. Plain grill. |
128 | Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete. 300 x 16 mm |
129 | Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete. 250 x 10 mm |
130 | 200 x 10 mm |
131 | Providing and fixing MS handles with necessary screws etc complete. 125 mm |
132 | 100 mm |
133 | Providing and fixing MS Hooks and Eyes. 200 mm |
134 | Providing and fixing 2.50 cm thick approved local wood eaves boards 23 cm wide with necessary mouldings etc. |
135 | Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during lying including painting the exposed portion of loop all as per standard design complete. |
136 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately). |
137 | Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. 40 mm thick |
138 | Cement plaster skirting (up to 30 cm height) with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, including rounding of junctions with floor. 18 mm thick |
139 | White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry. |
140 | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. 0.63 mm thick GI sheet |
141 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete. 0.63 mm thick GI sheet |
142 | Providing and fixing 4.0 mm thick asbestors plain sheet ceiling of approved quality with necessary nails etc.complete (frame work for base to be paid separately). |
143 | Providing and fixing plain, square edged wooden beading 38 mm x 12 mm section with screws of approved quality for ceiling. Best local approved quality wood. |
144 | Extra for making chamfered edges of beading. |
145 | 12 mm cement plaster 1 : 4 (1 cement : 4 fine sand). |
146 | 15 mm cement plaster 1 : 6 (1 cement : 6 fine sand) on the rough side of single or half brick wall. |
147 | Neat cement punning. |
148 | White washing with lime on new work (two or more coats) to give an even shade. |
149 | Distempering with dry distemper of approved brand and manufacture (two or more coats) and of required shade on new work including priming coat of whiting to give an even shade. |
150 | Applying one coat of distemper primer of approved brand and manufacture on wall surface. |
151 | Painting two coats with oil type wood preservative of approved brand and manufacture on new work. |
152 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
153 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work. |
154 | Applying priming coat with ready mixed genuine red lead paint ofapproved brand and manufacture on steel work. |
155 | Painting two or more coats on GI sheets with superior ready mixed paint of approved brand and manufacture in white, grey or green shades on new work to give an even shade. |
156 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade. |
157 | Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar |
158 | Construction of cement concrete drain 15 cm wide and 15 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm |
159 | Providing laying and jointing glazed stone ware pipe grade "A" with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150 mm dia SW pipes |
160 | Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15cm thick as per standard design. 150 mm dia SW pipes |
161 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement : 5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse |
162 | Construction of soak pit 1.2 x 1.1 x 1.2 m filled with brick bats including SW drain pipe 100 mm dia and 1.20 m long complete as per standard design. |
163 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). 15 mm nominal bore |
164 | 20 mm nominal bore |
165 | Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work). 20 mm nominal bore |
166 | Providing and fixing brass bib cock of approved quality. 15 mm nominal bore |
167 | Providing and fixing brass stop cock of approved quality. 15 mm nominal bore |
168 | Providing and fixing PVC connection pipe with brass union. 45 cm length 15 mm nominal bore |
169 | Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet. 150 mm dia |
170 | Providing and fixing ball valve (brass) of approved quality complete. Low pressure with copper floats 20 mm nominal bore |
171 | Painting G.I. pipes and fittings with white paint over a coat of ready mixed priming coat both of approved quality for new work. 15 mm dia pipe |
172 | Providing and filling sand all round GI pipes in external work. 20 mm dia pipe |
173 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvan Orissa Pattern WC Pan |
174 | Providing and fixing white vitreous china wash basin with RS or CI brackets painted white 15 mm CP brass pillar taps and CP brass chain with rubber plug 32 mm CP brass waste of standard pattern, 32 mm dia CP brass trap and MI unions complete, including cutting and making good the walls where required. |
175 | Providing and fixing kitchen sink including making all connection excluding cost of fittings. |
176 | Providing and fixing CP Brass Chain and rubber plug complete for sink or wash basins. |
177 | Providing and fixing CP brass waste for wash basins and sinks. 32 mm dia |
178 | Providing and fixing MI fisher union for wash basin and sinks. 32 mm dia |
179 | Providing and fixing CP Brass or MI trap for wash basin and sinks. 32 mm dia |
180 | Providing and fixing 100 mm sand cast iron grating for gulley, floors or nahni trap. |
181 | Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleadt with CP brass screws and washers. |
182 | Providing and fixing 600 x 120 mm glass shelf with CP brass brackets and guard rail complete, fixed to wooden cleadts with CP brass screws. |
183 | Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleadt with CP brass screws (heavy quality). 750 x 20 mm size |
184 | Providing and fixing sand cast iron cast/iron (spun) soil, waste and vent pipes. 100 mm dia |
185 | 50 mm dia |
186 | Providing and fixing sand cast iron heel rest sanitary bend. 100 mm dia |
187 | 500 mm dia |
188 | 1.20 m high welded steel wire fencing with 1.80 m RCC posts of standard design placed at every 3 m apart embedded in cement concrete blocks 45 x 45 x 60 cm of mix 1 : 5 : 10(1 cement : 5 fine sand : 10 stone aggt. 40 mm nominal size), corner end and every 10th post to be strutted and embedded in cement concrete blocks of 70 x 45 x 50 cm of same mix provided with welded steel wire fabric 0.90 m wide, rectangular mesh 75 x 25 mm size weighing not less than 7.75 kg per Sq.m. fixed between the two posts fitted and fixed with GI staples on wooden plugs or tied to 6 mm bar nibs with binding wire including earth work in excavation, concrete work and cost of posts, struts etc complete. |
189 | Providing and fixing of steel gate. |
190 | Furnitures |
191 | Wooden Cots |
192 | Plastic ArmChair |
193 | Water filter (10.00 litter Capacity ) |
194 | Wooden Table |
195 | Revolving Chair |
196 | SEPTIC TANK = 25.00 USERS |
197 | Earth work in excavation in foundation trenches not exceeding 1.50 m width or 10 Sq.m. on plan or drains not exceeding 1.50 m in width or 10 Sq.m. on plan including dressing of sides and ramming of bottoms, lift upto 1.50 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. b) Hard Soil |
198 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth |
199 | Brick work with best available local bricks in foundation and plinth in cement mortar 1:3 (1 cement : 3 fine sand). |
200 | Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth |
201 | Reinforced cement concrete in suspended floors, roofs, landings and balconies upto floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centring and shuttering and reinforcement with 1 : 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size). |
202 | Reinforcement of RCC work including bending, binding and placing in position complete. a) Cold twisted bars. |
203 | 12 mm cement plaster 1 : 3 (1 cement : 3 fine sand). |
204 | Construction of soak pit 1.2 x 1.1 x 1.2 m filled with brick bats including SW drain pipe 100 mm dia and 1.20 m long complete as per standard design. |
205 | Constructing brick masonry manhole with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg), cement concrete 1 : 4 : 8. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail