Construction Of Day-Care Phc N Building At Danpur Of Derabish Block In The Dist. Of Kendrapara For The Year 2023-24. Construction Of Building Work, Kendrapara-Odisha

TDR : 43091625

Tender Notice
BOQ

Expired

Kendrapara , Odisha

Tender Brief : Construction Of Day-Care Phc N Building At Danpur Of Derabish Block In The Dist. Of Kendrapara For The Year 2023-24. Construction Of Building Work

Document Fees
₹ 10000 /-

EMD
₹ 119137.0 /-

Tender Value
₹ 1.19 Crore /-

Submission Date
16-04-2024

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil Work
2	Earth work in excavation of foundation trenches in hardsoil within initial lead and lift including dressing and leveling the bed upto the required depth and depositing the excavated materials away from the working area etc.complete as per the specification and direction of the Engineer-in-charge.
3	Providing single under reamed piles foundation with R.C.C. M-20 using 12mm BHGCB chips of 9.00 mtr long & 375 mm dia including cost of boring but excluding cost of M.S. rods/tor steel and labour charges of cutting bending and binding of steel etc complete.
4	Supplying, filling in foundation and plinth with sand including watering andramming with cost, conveyance, royality andtaxes of all materials and cost of labour with T&P required for the work etc. complete (Measurement will be taken on finished section only)as per the specification and direction of the Engineer-in-charge.
5	ProvidingCement concrete (1:3:6 ) using 40mm. sizehard crusher broken grinitemetal of approved qualityfrom approved quarry in foundation and plinth including hoisting , lowering , laying in layers not exceeding 0.15mt. in thick , compacting , water curing withall cost, carriage, royalty, all taxes, labour &T. & P. etc.completeas per specification and direction of E.I.C.
6	Cement Concrete (1:2:4) with 12mm size hard granite chips includimg hoisting and laying etc complete as per direction of the engineer-in -charge.
7	Fly ash brick masonary in cement mortar (1:6) in foundation and plinth using fly ash brick of size 25cmx12cmx8cm having crushing strength not less than 75 kg/ sqcm with immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties of all materials and all labour, T&P etc. for scaffolding, watering and curing etc. complete as per the specification and direction of the Engineer-in-charge.
8	Ground Floor
9	Fly ash brick masonary in cement mortar (1:6) in Superstructure using fly ash brick of size 25cmx12cmx8cm having crushing strength not less than 75 kg/ sqcm with immersing the bricks for minimum 6 hours in water before use with necessary projections, splays, cutting, circular moulding, corbelling etc. including cost, conveyance, taxes, royalties of all materials and all labour with T&P etc. for scaffolding, watering and curing complete as per the specification and direction of the Engineer-in-charge.
10	Ground Floor
11	First Floor
12	RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying and compacting concrete by using vibrator with watering and curing for 28 days, centering and shuttering and finishing the exposed surface smooth providing grooves or beads where ever necessay including cost, conveyance, royalties and taxes of all materials and cost of all labour with T&P required for the work etc. complete in all respect but excluding cost of M.S.Rods or Tor Steel and binding wires and labour charge for bending binding and tying the grills etc.complete in all respect as as per the specification and direction of the Engineer-in-charge.
13	Pile Cap
14	Plinth Bend
15	Column up to plinth
16	Column in Superstructure
17	Ground Floor
18	1st Floor
19	Wall Beam & T- Beam
20	Ground Floor
21	1st Floor
22	Stair Case
23	Ground Floor
24	Lintel
25	Ground Floor
26	Chajja
27	Ground Floor
28	Shelves
29	Ground Floor
30	Roof Slab
31	Ground Floor
32	1st Floor
33	Providing HYSD bar reinforcement for R.C.C. work including Straightening, cutting, bending, binding, welding, tying the grills, laying and placing in proper position as per approved design and drawing including cost, conveyance of 18 to 20 gauge binding wire, cost and conveyance of HYSD bars of Fe 500D complete in all respect as as per the specification and direction of the Engineer-in-charge.
34	Ground Floor
35	1st Floor
36	12mm(1/2\")thick cement plaster (1:4) in all floors over brick work finished smooth including cement punningincluding watering, curing, cost conveyhanace, royalty and all taxes of all materials and labour with T&P required for the work etc.complete as per direction of Engineer-in-charge.
37	Ground Floor
38	12mm thick cement plaster in cement mortar (1:6) finished smooth to outside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royaltyand taxes of all materials with cost of all labour, T&P etc. required for the work complete asper the specification and direction of the Engineer-in-charge.
39	Ground Floor
40	1st Floor
41	16mm thick cement plaster in cement mortar (1:6) finished smooth to inside surface of brick walls after racking out joints including watering and curing with cost, conveyance, royaltyand taxes of all materials with cost of all labour, T&P etc. required for the work complete asper the specification and direction of the Engineer-in-charge.
42	Ground Floor
43	1st Floor
44	20 mm thick cement plaster ( 1:4 ) for grading plaster over roof slab including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the E.I.C
45	Ground Floor
46	Supplying, fitting and fixing vitrified tile in floors of size (600mmx600mm of approved make conforming to IS:13755 laid on 20mm thick cement mortar (1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour, T&P etc required for the work all complete as per direction of Engineer-in-charge. (for new work)
47	Ground Floor
48	Labour for supplying and fitting of Ceramic Walltiles on walls including all cost, conveyance, tax, royalty, T&P etc., complete as directed by the E.I.C.
49	Ground Floor
50	Fittingof Granite tilesinfloorstreadsonstepsandlandingon 25mm thickbedofcementconcrete ( 1:1 )joinedwith neat cement punning etc.
51	Ground Floor
52	Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge.
53	Ground Floor
54	Suppling and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC)(FENESTA/NCL VEKA LTD.)Casement Door-60-Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mm x 25 mm for outer frames,102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5 mm mullion profile capable of mounting single glazing sustem,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & weldewd through fusion welding the door sash shall be fitted with 12 mm thick WPC Board of Greenply make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminum 1 No. per set of sashes and the system is to be installed at the site using anchore fasteners,silicon rubber sealent,easy glazing/deglazing at site etc.,including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.
55	Suppling and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC)(FENESTA/NCL VEKA LTD.)Three panel sliding window-60-series duly manufactured using UPVC reinforced profile of 108 mm x 45 mm x 2.5 mm for outer frame and Window Sash of 39 mm x 58 mm x 2.5 mmcapable of mounting single glazing sustem,structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5 mm prefabricated & weldewd through fusion welding the door sash shall be fitted with 6 mm thick clear toughened glass of SAINT-GOBAIN makeduly fixed with EPDM weathering seal resistant and the system is to be installed using reinforced Larg couplerat the site using anchore fasteners,silicon rubber sealent,easy glazing/deglazing at site etc.,including cost and conveyance of all materials,accessories,labour charges,materials and product conforming to ASTM D 638-14,EN-477-95 and other applicable codes and standards.
56	Finishing wall surface with acrylic wall putty finished smooth to exposed new plastered surfaceincluding cost of all materials etc. complete as per the specification and direction of the Engineer-in-charge.
57	Ground Floor
58	Distempering two coat over a coat of priming to the interior surface using approved quality of distemper and water bound primer including cost, conveyance, royalty and taxes of all materials and labor withT&P required for the work complete in all respectas per the specification and direction of the Engineer-in-charge.
59	Ground Floor
60	1st Floor
61	Finishing wall surface with weather coat paint two coats over a coat of priming to outside surface using approved quality of weather coat paint and water bound primer of approved shade including cost, conveyance, royalty and taxes of all materials, labour charges, T&P etc. required for the work complete as per the specification and direction of the Engineer-in-charge.
62	Ground Floor
63	1st Floor
64	Supplying, fitting and fixing of M.S. Door & window grill and gate made out of (35x35x5)mmsize angular frame with square bar M.S. flat for grills of approved design includingcost, conveyance,royalty & taxes of all materials, labour charges T&P etc. required for the work complete including iron fittingsas per the specification and direction of the Engineer-in-charge.
65	Ground Floor
66	1st Floor
67	Painting two coats in all floors to new wood andiron work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge.
68	Ground Floor
69	1st Floor
70	Supplying ,fitting & fixing of stainless of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mmx32mm x2mm @ rate 0.90mtr . c/c and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification, buffing , polishing etc with cost ,conveyance, taxes of all materials , labour, T&P etc. required for the complete in all respect.
71	Ground Floor
72	Supplying, providing & Fixingof50mm thick of RCC Jallyetc complete in all respect as per direction of the Engineer-in-charge.
73	Ground Floor
74	Providing cement concrete (1:1.5:3) with 12mm & down gredenominal size of crusher broken hard granite stone aggregate of qpproved quality from approved quarry for cement concrete road/CD works including hoisting, lowering & laying in position in layers with proper packing & ramming by means of vibrator to proper slope & level including curing with cost, conveyance, royalty & taxes of all materials required for the work including running & hire charges of machineries required for the work including all labour for the work complete in all respect as per direction of the Engineer-incharge.
75	Providing dummy groove joints @ 5.0M. Interval for concrete pavements including filling the groove with bitumen, cost of all materials,labour,T&P required for the work etc. complete and as per the direction of the Engineer-in-Charge.
76	Providing laying 80 mm thick cement concrete inter locking paver brick of M35 grade and of approved make veraity colour and size by block making machine with strong vibratory compaction of approved design and shape laid in required colour and parteen 50mm thick compacted bedof coursesand etc. complete.
77	E.I Works
78	Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )
79	-do- Group A
80	-do- Group B
81	-do- Group C
82	Recessed wiring to Fan Point in...
83	-do- Group B
84	-do- Group C
85	Recessed wiring to Call Bell Point in...
86	-do- Group C
87	Recessed wiring to Exhaust Fan Point in…..
88	-do- Group C
89	S/F of fan hook \"S\" type made of 16 mm MS rod for fixing in the Existing RCC Roof.
90	S/F of Angle holder replacing Ceilling Rose
91	S/F of 5A. Modular Switch & 5A.Modular Socket outlet of ISI marked on existing board
92	S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano typemodular switch, connection, painting etc as required.
93	S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of5 pin 15/16 amp. piano type Modularswitch & Socket, connection, painting etc as required
94	S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch& 1 no of Mini MCB complete with wiring on 12 modularM.S. box with modularcover.
95	S/F of 1 no of 5 pin 15/16 amp.Socket , 1 no of switch & 1 no of15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as requiredfor Inverter connection
96	S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.
97	2 Modular box with base & cover
98	4 Modular box with base & cover
99	6 Modular box with base & cover
100	8 Modular box with base & cover
101	12 Modular box with base & cover
102	Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire -Finolex/L&T/Anchor/Havels/V-guard)
103	2x1.5+1x1.5 (1.8.1)
104	2x2.5+1x1.5 (1.8.2)
105	2x4+1x1.5 (1.8.3)
106	4x6+2x2.5(1:8:10)
107	Inverter wiring (1x1.5smm) Copper wire (1.19.1)
108	Supply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.)
109	S/F of 6 way (6+18) TPN MCB DB double door with provision of 63Amp 4P MCB-1No., 32A DP MCB-3Nos. &6 to 32Amp SP MCB-12Nos.
110	Earthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2)
111	Supply & laying 8 SWG Cuwire in recess for loop earthing as required (3.18)
112	Supply, Installation, Testing & Commissioning of exhaust fan upto 300 mm sweep in the exising opening, including making the hole to suit the size of the above fan making good the damaged complete, connection, etc as required. (1.43)
113	S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)
114	S/F of 18-25Watt L.E.D Tube light fittingwith all accessories and connections (Make:HPL-Neptune Havells-Elite LED Pride Plus/PAC/Crompton-RetroPLL
115	Supply of 1200mm A.C. Ceiling fan with all accessories and connections with out fan regulator (Make:Usha-Striker Neo/Crompton-High speed /Anchor-Turbo speed star/Havels-Samrat ES/Orient-Summer Breeze pro/Great white-Aldous/Pollycab-Vital HS )
116	S/F step type modular fan regulator
117	Supply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval typeincluding necessary connections. ( M-5 )
118	Supply & Fixing of 60 Watt single L.E.D street light fittingwith LED & Electrinic driver including all accessories and connections (Make:Crompton/Phillips/HPL/Polycab/Havells)
119	S/F of10w Watt LED Bulb
120	S/F of 1.5T 3Star split type AC Machine, Make-Carrier/Voltas/Hitachi
121	S/F of 5KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard
122	S/F of 2250 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous
123	S/F of 15A socket on 2Modular Board board for A.C
124	S/F of 25AMoter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)
125	Supply & fixing of 100 A TPN Panel board1. 100A MCCB (Make- Legrand/Seimens/L&T/C&S/) & 100A kitkat & bus bar2. 32 A DP MCB(Make- Legrand/Seimens/L&T/C&S/)- 2nos 3. TPN Busbar-1set4. 63Amp 4P Changeover-1No.5. Digital Volt meter & Ameter three phase6. All accesories & Connection (Rating & Danger borad)
126	P.H Works
127	Earthwork in all kinds of soil in excavation of foundation trencheswithin 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.(a) Initial lift upto 1.5 mtr
128	From 1.5 mtr to 3.0 mtr depth
129	Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.
130	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
131	Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
132	Supplying all materials,labour, T&P and providing Brick work with Fly ash Brick having crushing strength not less than 75 Kg/CM2with dimensional tolerence of +/- 8% in C.Mincluding watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
133	Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a) 20 mm thick C.P in C:M (1:3)
134	Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
135	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling them after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
136	Supplying all materials, labour, T&P and providing Reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
137	Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
138	Supplying all materials, labour, T&P and making M.S. Step Iron in 12mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded inC.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
139	Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C.bafflewall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
140	Supplying all materials, labour, T&P and providing 110mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded inP.C.C(1:1.5:3)using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
141	Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works includingwatering curring and conveyance of all materialsto work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
142	Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth includingwatering, ramming etc all complete as per direction of the E.I.C.
143	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing etc all complete as per P.H specification and direction of the E.I.C. (a) 110mm diameter U-PVC SWR pipes
144	110mm U-PVC P-trap
145	110mm U-PVC SWR Single junction door
146	110mm U-PVC SWR Double junction door
147	110mm U-PVC SWR door bend
148	110mm U-PVC SWR Offset
149	110mm U-PVC SWR plain bend
150	110mm U-PVC SWR vent cowl
151	125 mm dia C.P Grating
152	75mm diameter U-PVC SWR pipes
153	75mm U-PVC SWR Plain bend
154	Supplying all materials, labour, T&P and fixing porcelain glazed tiles in floors, on 25mm thick bed of cement mortar 1:1 joined with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. all complete as per specification and direction of the E.I.C. (a) Ground Floorl
155	Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados/skirtings on 12mm thick cement plaster (1:3) joined with neat cement slurry mixed with pigments to match the shades of the tiles including rubbing and polishing etc. all complete as per direction of the E.I.C.
156	supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking HCI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. (a) 375 mm thick wall
157	250 mm thick wall
158	Supplying all materials, labour, T&P and laying in trenches U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer\"s specification, testing, earthwork in excavation in all kinds of soil and providing bed concrete in P:C:C (1:4:8) using 40 mm size metal and haunch top the pipe with refilling of trenches etc all complete as per P.H specification and direction of the E.I.C. (a) 110 mm dia PVC Pipe all round
159	160 mm dia PVC Pipe all round
160	Supplying all materials, labour T&Pand fixing Water closet, (Orissa pattern squating pan) duly embeded in c.c. (1:5:10) using 4cm h.g. metal all complete as per direction of E.I.C. (a) 580mm Orissa pan (Neycer/Cerra/ Parry ware/ Hindware)
161	Supplying all materials, labour, T&P and fixingwash down water closet(E.W.C) with integral \"S\" or \"P\" trap to the floor with wooden plug and C.P screw including jointing the trap with soil waste pipe in C.M(1:1) & PVC Seat cover etc all complete as per specification and direction of the E.I.C.(a) EWC with Seat Cover(Hindware/Parryware)
162	Supplying all labour materials T&P Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated usingE-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size \"S\" shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre\"s standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigmentscomplete in all respect as per specification and direction of the E.I.C
163	Supplying all labour materials T&P Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gelcoat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reiforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre\"s standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
164	Supplying all materials, labour, T&P and constructing Inspection Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C. (a) Inside size 760mm x 760mm x 460mm
165	Addl depth of 0.15mtr to 0.90mtr
166	Supplying all materials, labour, T&P and construction Manhole Chamber of the following sizes withcement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips,12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, paymentof royalty, taxes etc. all complete as per approved specification and direction of E.I.C. (a) Inside size 9100mm x 910mm x 910mm
167	Supplying all materials, labour, T&P and constructing Gully Trap chamber of the following inside size with 8 cm thick precast cover slab in CC (1:2:4) mix using 12 mm size H.G chips, foundation concrete (1:4:8) using 40 mm size HG metal on bed and around trap , !st class KB Brick work in CM (1:6) in F & P and inside 12 mm thick cement plaster (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI gully trap 150mmx150mm size C.I grating etc. all completed as per approved drawing, specification and direction of E.I.C.
168	Supplying all materials, labour, T&P and constructing soakway pit of the following size with dry brickwalling from bottom upto invert of inlet pipe and 1st class KB brick work in CM (1:6) for the remaining height at top, 12mm thick Cement Plaster (1:4) inside and outside over masonry brick work, gravel packing in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a) 1.20 m diax 2.0 m deep soakway pit
169	Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast R.C.C rings joined loose gravelbacking in the rear of well steining, RCC cover slab in CC (1:1.5:3) using 12mm HG chips, fitted with iron lifting handles including earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C. (a) 0.91 m diax 2.10 m deep soakway pit
170	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C.(a) 20mm dia C-PVC pipes(Internal)
171	supplying all materials, labour, T&P and cutting holes through existing brick/stone masonry walls for taking GI/PVC pipes and fittings including making good the damages in cement mortar (1:4) etc. all complete as per P.H. specification and direction of E.I.C. (a) walls
172	supplying all materials, labour, T&P and cutting grooves in pucca Floors, and walls for taking G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:3:6) including finishing with 12mm C.P (1:3) complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C.
173	Supplying all materials, labour T&P and fixing wash basins with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. (a) 550mmx400mmW.H.basin
174	(b) Fixing of Pedestrial for W.H.B
175	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification and direction of the E.I.C.(a) Mirror with plastic moulded frame
176	Supplying all materials,labour, T&P and fixing standard sized CP towel rail complete withCP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. (a) 20mmx450mm long CP towel rail
177	Towel Ring
178	Supplying all materials, labour, T&P and fixing CP soap holder complete with CP brass brackets fixed to wooden plugs with CP screws as per specification and direction of the E.I.C. (a) CP soap holder
179	Supplying all materials, labour T&P and fitting and fixing of C.P Shower with 15mm or 20mm inlet with C.P Shower arm including polishingetc all complete as per specification and direction of the E.I.C. (a) 15 mm dia C.P Shower with arm (Parryware make)
180	Supplying all materials, labour T&P and fixing Stainless Steel Kitchen Sink with C.I. or M.S.brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing PVC waste pipe of 32mm nominal diameter for Sink including brass check nut complete, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the E.I.C. (a) 510x404x200 mm stainless steel kitchen sink (Mousumi make)
181	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling or floor G.I. pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling,and floor, testing all complete as per specification and the direction of the E.I.C. (a) 25mm dia C- PVC pipes
182	20mm dia C-PVC pipes
183	Supplying all materials, labour, T&P and fitting and fixing Brass/CP fittings of the following nominal bore with supply of all jointing materials etc. all complete as per specification and the direction of the E.I.C. (Jaquar Make) (a) 15mm dia CP Bib Cock
184	15mm dia CP (L.B) Bib Cock
185	15mm dia CP Angle Stop Cock
186	15mm dia CP Concealed Stop Cock
187	15mm dia CP Pillar Cock
188	15mm dia CP Two in One Bib Cock
189	15mm dia CP Health Fluccet
190	25mm dia Brass or gun metal Full Way Valve
191	15mm dia CP Extension Nipple
192	15mm dia CP Flange
193	Supplying all materials, labour T&P and fitting and fixing 10 Ltrs capacity PVC low level flushing cistern with a pair of C.I. or M.S.brackets complete with fittings such as syphonic arrangement, 15mm nominal size Brass/PVC ball valve with polythene float, CP/Brass handle, unions and couplings for connection with inlet, outlet, overflow pipes, 32mm dia PVC flush bend, 15mm dia PVC connection pipes including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main with etc all complete as per specification and direction of the E.I.C. (a) 10 lit PVC L/L Cistern
194	Supplying all materials, labour, T&P and construction of masonry staging with providing 1st class K.B. Brick work in C.M.(1:6) of 0.46mtr height in staging, 12 mm cement plaster in C.M (1:6), R.C.C. Beam of 0.25mx0.30mx2.60m & roof slab of 1.40mx1.40m in C.C (1:1.5:3) using 12mm size H.G.Chips including centering, shuttering, bending and binding of rod etc watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a) 2000 lits capacity on the roof of (Ground loor)
195	Supplying all materials, labour, T&P and Fitting and Fixing of Rotational moulded polythene cylindrical vertical water storage tank conforming to 15701/1996including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jamnuts, including hoisting upto a height of 5 mtr aboveG.Land placing the tank in required position including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C. (a) 2000 lits capacity on the roof of (Groundfloor)
196	Sinking of 125mm x 50mmTubewell through Hand Boring Method
197	Supplying all materials, labour, T&P and setting up boring equipments including irrection of suitable stagging for installation of the required size of tube-well. Dismantling & removing the same after completion of the work including transportation of boring equipments clearing & leveling the site, excavation of mud pit channels etc., leveling of site all complete as per direction of E.I.C. (a) Setting for depth 0.00m to360m.
198	Supplying all labour, T&P & transportation of boring pipes, top casing, grouping pipes, PVC pipes and fitting, PVC well screens, cement, betoniteetc. including loading and unloading etc. complete as per direction of the E.I.C.(Labour)
199	Supplying all labour, T&P and drilling pilot bore not less than 102mm dia without casing pipes in all kinds of soil and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments extra sockets etc.and withdrawing the boring pipes washing & keeping the bore clear for logging if required all complete as per the direction of EIC
200	Supplying all labour, T&P & reaming the pilot bore to the following sizes and depths without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc. all complete as per direction of E.I.C. (a) 100 mm ot 150 mm dia( 00 mtr to 360 mtr)
201	b) 150 mm to 200 mm dia( 00 mtr to 360 mtr)
202	c) 200 mm to 250 mm dia( 00 mtr to 360 mtr)
203	Supplying all labour, Tools and plant and lowering the 300mm dia top casing pipe into position and removing the same after use as per the direction of Engineer-in-charge.
204	Supplying all labour, T&P and jointing materials and lowering the PVC casing pipes fitting and well screens in position including fitting of centralizer cutter plugs and washing the bore as per the direction of E.I.C.(Including cost of Materials) (a)125mm dia PVC Schedule
205	b) 50mm dia PVC Pipe & Stainer Schedule
206	Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in thebore around the 50mm dia PVC casing pipe etc. all complete as per the direction of E ngineer- in- charge(Cement and Bentinite will be supplied by Contractor)
207	Supplying all labour, tools and plant and grouting with cement bentonite slurry for saline sealing in thebore around the 125mmmm dia PVC casing pipe The uppermost layer up to3.00 mtr etc. all complete as per the direction of Engineer- in- charge(Cement and Bentinite will be supplied by Contractor)
208	Supplying all labour tool & plant and material for cleaning the developing the tube well using compressor continuouslyto get clear and adequate dischargefrom the tube well including the supply and use of all necessary equipment and labour as per direction of E.I.C.
209	Supplying of the following materials with fittings and fixing in proper position with cost, carriage and all other taxes etc complete. as per the direction of E.I.C. (a) 125 mm dia PVCPipe (Schedule-80)
210	b) 50 mm dia PVCPipe (Schedule-80)
211	c) 50 mm dia PVC strainer
212	d) 125x50 mm dia PVC R/S
213	e) 50 mm dia Plug Cutter.
214	Supplying of ISI Mark 1.00 HP Single Phase Vertical Submersible Pump Set with Discharge of 900-1000 liter/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charage.
215	Supplying all labour, T&P and fitting and fixing of 1.00 HP Single phase vertical Submersible Pump Set with commissioning and testing, Electrificationetc. all complete as per direction of EIC
216	Supplying and fitting and fixing of ISI Mark DOL Starter of reputed make like BCH or Equivalent for 1.00 HP Single Phase Submersible Pump including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge.
217	Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI Make of reputed company line BCH/Finolex or Equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of Engineer-in-charge.
218	Supplying and fitting & fixing of Plastic rope, M.S. Well Cover, M.S. Clamp, Stainless Steel Short piece, Bend & Socket including all const, conveyance and taxes etc. all complete as per direction of engineer-in-charge.
219	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and dir of E.I.C. a)32/40mm dia HDPE Pipe (External)

Need a Bussiness Loan? Apply Now!
Buy Digital Signature
Bidding Support

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Construction Of Day-Care Phc N Building At Danpur Of Derabish Block In The Dist. Of Kendrapara For The Year 2023-24. Construction Of Building Work, Kendrapara-Odisha

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Construction Of Day-Care Phc N Building At Danpur Of Derabish Block In The Dist. Of Kendrapara For The Year 2023-24. Construction Of Building Work, Kendrapara-Odisha

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us