Military Engineer Services-MES has published Tender For Special Repair And Additional Alteration Of Bldg No T-65 (Auditorium) And Bldg No T-34A, T-34B At Age B/R-Ii And Age E/M Under Ge Babina Cantt. Submission Date for this Tender is 29-04-2024. Auditorium Construction Tenders in babina Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2024 | Postponed | Date | 29-04-2024 |
| 2 | 16-Apr-2024 | Amendment | BOQ | 29-04-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 2 | Dismantling of plain or corrugated steel sheeting, any guage, thickness includidng nainital or similar pattern in roof covering complete all as specified and as directed. |
| 3 | S & F Pre- painted galvalume aluminum zink coating GI based corrugated steel0.50mm thick and AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and as directed. |
| 4 | S & F Pre- painted galvalume aluminum zink coating GI based plain steel0.50mm thickand AZ- 150 of an colour having tensile strength of 550mpa as in roof covering/cladeding to wall, fixed with self tapping screw complete all as specified and as directed. |
| 5 | Dismantling timber scantling unframed work 40 sq. cm and over in section in any position complete all as specified and as directed. |
| 6 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-290 Gde E-165 complete all as specified and as directed. |
| 7 | Taking down, Erection and Re-Fixing of Roof trusses (framed), trusses, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. all as specified and directed. |
| 8 | M&L mild steel work in hand rails, half round or other steel section or core for Wind ties for roof including securing bolts, post and struts cutting tops to shape as directed, drilling holes, notching for wire etc and similar work confirming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 9 | M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer, over 10cm in width or girth,not otherwise described complete all as specified and as directed. |
| 10 | Dismantling walland ceiling boards (fibre, pump, insulation etc,) or insulation boards of any thickness including cover fillets complete all as specified and as directed. |
| 11 | M&L for aluminium anodised snap grid frame work of the following (a)Main Tee section 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) (b)Section alongwith wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) (c)Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) (d) Snap grid shall be fixed to G.I Flat 40 x 3mm supporting hangers consisting of 4mm dia G.Irodn.exc 1.20m length with J bolts nuts and washer etc as per manufacture instructions & complete all as directed. |
| 12 | M&L for 4mm thick high pressure steam cured non asbestos fiber cement design board of size 600mm x 600mm fixing in ceiling complete all as specified and diredted. |
| 13 | Demolition ofBrickwork of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed. |
| 14 | M&L brick work with fly ash bricks (FASB) conferming to IS 12894, of strength M-10 straight or curved on plan exc 6m mean radious built cement mortar 1:6 complete all as specified and as directed. |
| 15 | M&L for Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in lime mortar 1:3 or cement mortar 1:6 complete, n exc 3m in length complete all as specified and as directed. |
| 16 | M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in copping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and as directed. |
| 17 | Taking down cement plaster on brick or stone walls etc incl racking out joints hacking for key and scrabbing down with water etc complete all as specified and as directed. |
| 18 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces CM 1:6, and finishing the surface even and smooth without using extra cement completeall as specified and directed. |
| 19 | Demolition of cement concrete (unreinforced) in ground floor or pavings n.exc 15cm thickness (below or above ground floor) complete all as specified at site complete all as specified and as directed. |
| 20 | M&L for 75mm thick cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in flooring, plinth protection /path finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | Dismantling floor hearth wall tiling including cement mortar bedding but not backing removing serviceable meterial to store complete all as specified and as directed. |
| 22 | M&L for coloured ceramic tiles 7 to 8 mm thick (square / rectengular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6 etc complete all as specified and as directed. |
| 23 | M&L for coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado etc. set and jointed in neat cement slurry and pointed in colour cement to match to floor, over and incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 24 | M&L for 25mm thick PCC 1:2:4,type B-0, (using 12.5mm graded stone aggregate) as in sub floor conplete all as specified and directed. |
| 25 | M&L for glazedcoloured ceramic tiles 300 x 600 x 7mm thick for work on vertical surface such as skirting, dado, set & jointed in cement slurry and pointed in white or coloured cement to match the existing wall surfaces, over and incl 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 26 | M&L for machine cut kota stone slab flooring 18 - 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, over and including 15mm thick screed bed or bedding layer in cement mortar 1:4,etc complete all as specified and as directed. |
| 27 | M&L for machine cut kota stone slab 18 - 20mm thick, in riser of steps, skirting, dado and pillar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete,incl 10mm thick rendering on wall or conc surfaces in cement mortar 1:4 ,complete all as specified and as directed. |
| 28 | M & L Chequered cement concrete Glossy tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurryin floors over 15mm CM (1:6) thick screed bedding specified and directed by engr-in-charge. |
| 29 | M&L for complete remoal of existing treatment from wall and appying two coat of oil bound distemper with roller over including prepration of surface complete all as specified and as directed. |
| 30 | M&L for a coat of JK/Birla wall care putty 1mm thick including preparation of surface complete all as specified and as directed. |
| 31 | M&L for applying two coat of cement base paint including preparation on new plaster surfaces of external surface complete all as specified and as directed. |
| 32 | M&L for preparing old surfaces of wall andapplying two coats of cement base paint on external surface complete all as specified and as directed. |
| 33 | M&L for complete removal of existing treament on wall and applying two coat of white wash all as specified and as directed. |
| 34 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each etc complete all as specified and as directed. |
| 35 | -do- but exc 1.5 Sqm and n exc 4 sqm each. |
| 36 | S&F for powder coated aluminium sliding windows with glazed/ fly proof shutters having top rail of section 41mmx20mmx1.6mm thick, bottom rail of section 41x20x1.6mm thick ,vertical style of section 38x20x1.6mm thick etc. including necessery jointing cleats ,glazing clips, rubber packing ,snap beading, screws handle and locking system etc, fitted including using standard aluminium section including necessery fittings and fixtures complete all as specified and directed. |
| 37 | S&F powder coating Anodised aluminium sliding windows/ventilator with glazed without sash bars, aluminium sections weighing 0.55 kg/m etc. including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed. |
| 38 | S&F for 125 mm x 60 mm size pressed steel frames for door with one or more rebates including necessary fixing lugs, hinge lock strike plate ect including one shop coat of red oxide primer including cutting holes and making good in PCC 1:2:4type B1 using 20mm graded stone aggregate complete all as specified and as directed. Note :- 10mm deformed bar shall be provided in bottom & PCC will be provided in hollowframe in same rate. |
| 39 | S&F Locally made 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides etc complete all as specified and as directed. |
| 40 | S&F Locally made30 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.20 (a),divided into squares with plain chamfered rounded, mitered and rebated sash bars etc complete all as specified and as directed. |
| 41 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube etc complete all as specified and as directed. |
| 42 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail,paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to thestiles & rails with suitable PVC sheet beading, and joined together with solvent cementall as directed and specified by Engineer-in-Charge. |
| 43 | S&F mild steel flat iron of size 25x3 mm as in hold fasts and clamps & similar small articles confirming to Fe-410-W or Fe-290 complete all as specified and as directed by the Engr-in-Charge. |
| 44 | S&F Stainlesss steel wire cloth, 0.36mm nominal dia of wire and avg width of aperture 1.40mm fixed with stainless steel wire staples etc complete all as specified and as directed. |
| 45 | M&L two coat synthetic enamel paint over one coat of pink primer on new wooden surface of any description not otherwise described over 10 cm width or girth etc complete all as specified and as directed. |
| 46 | S&F but hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 100 mm size in toilet with PVC doors etc complete all as specified and as directed. |
| 47 | S&F aluminium anodised barrel tower bolts of extruded section and fixed fixed 200 mm long etc complete all as specified and as directed. |
| 48 | S&F aluminum handles cast type anodized 150 mm size etc complete all as specified and as directed. |
| 49 | S&F mild steel, 300 mm ordinary rat rail rod pattern door spring including roller and roller plate etc complete all as specified and as directed. |
| 50 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and as directed. |
| 51 | M&L framed work such as grills, gratings, etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders ; framed balusters; walk ways; railings; framework of watertanks and similar work conforming to Fe 290. Gde-E-165 complete all as specified and as directed. |
| 52 | S&F Figured glass, Pin head type 3mm thick ordinary quality and glazing with including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, each pane in square n. exc 0.5 sqm in each pane complete all as specified and as dirrected |
| 53 | S&F for 4.8mm to 5mm thick tinted sheet glass of size n. exc. 0.5 Sq. m each pane, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, each pane complete all as specified and as directed by the Engr-in-Charge. |
| 54 | S&F fancy type Stainless steel conduit curtain rod 32mm dia with fancy knob, ends and brackets complete all as specified and as directed by the Engineer-in-charge. |
| 55 | S&F in repairs vitreous china squatting pan "ORISSA PATTERN " size 580mm x 440mm "white with integral foot rest (excluding flushing cistern and flush pipe ) with "P" or "S" trap, front or back inlet including connection to trap and to flushing pipe anti syphonage pipe etc complete all as specified and as directed |
| 56 | S&F in repairs vitreous china wash down water closet (Pedastal pattern) "white (excluding flushing cistern and flush pipe ) including connection todrain or out going pipe andto flushing pipe anti syphonage pipe and making good to floor complete all as specified and as directed. |
| 57 | S&F in repair cast copper alloy chromium plated jet spray for EWC complete all as specified and as directed. |
| 58 | S&F in repairs hand shower (health faucet) (ABS chromium plated) with 8mm dia, 1m long flexible tube with wall hook complete all as specified and directed. |
| 59 | S&F in repairs 10 ltr capacity PVC low level flushing cistern white, ISI marked make as specified with inlet, float valve and handle including breacket with 32mm dia PVC pipe 600mm long complete all as specified and directed |
| 60 | S&F in repair vitreous china wash handbasin, white flat back, size 550mmx400mm fixed on and including cast iron cantilever brackets 32mm dia brass waste coupling and including fixing of tap waste fitting and union complete all as specified and as directed .Note: pillar tap shall be measured as supply only under respective items |
| 61 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 62 | S&F in repair brass chromium plated tubler towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as dirceted |
| 63 | S&F in repair CP soap dish 150x150 mm sizeheavy duty fixed to wall with brass chromium plated screws complete all as specified and as directed. |
| 64 | Taking up or down 15mm doa bore existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 65 | Taking up or down 20mm doa bore existing steel tubing and connections including cleaning for refixing or removal to store complete all as specified and as directed. |
| 66 | S&F, jointing 15mm diab bore and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed. |
| 67 | S&F, jointing20mm diab bore and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed. |
| 68 | S&F 500 litre capacity of rotational moulded polyethylene water storage tank multilayered construction, ISI marked of make specified (cylindrical vertical with closed top) hoisted and fixed in position including S&F 20 mm dia GI pipe medium grade washout pipe 450 mm long with plug and 20 mm dia GI pipe medium grade overflow pipe 600 mm long with fittings complete all as specified in SSR Part-I complete all as specified and as directed. |
| 69 | S&F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 70 | Supply only 20 mm boreBall valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. .(Minimum weight 20mm-210 gms complete all as specified. |
| 71 | S&F PVC connection 15mm dia with Brass nuts of length 450mm etc complete all as specified and as directed. |
| 72 | S&F brass CP mixer 15mm dia bore mixing hot & cold water pillar tap for wash hand basin screwed down for iron pipe and fixed complete all as specified and as directed. |
| 73 | S&F in repair 15 mm bore angle stop cock long threadfancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 74 | S&F in repair 15 mm bore stop cock long thread (concealed type) fancy type chromium plated cast copper alloy, screwed down high pressure with crutch or butter fly handle screwed both and for iron pipe or for union and fixed etc complete all as specified and as directed. |
| 75 | S&F in repair 15 mm bore bib taps long bodychromium plated fancy type, cast copper alloy with crutch or butter fly handle screwed down screwed for iron pipe or for unions and fixed 15 mm boreetc complete all as specified and as directed. |
| 76 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union complete all as specified and as directed. |
| 77 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors and taking down old PVC /CI/Concrete pipe complete all as specified and as directed. |
| 78 | S&F PVC (SWR) 110mm bore bends any radius complete all as specified and as directed. |
| 79 | S&F PVC (SWR) pipes75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floor and taking down old PVC /CI/Concrete pipe complete all as specified and as directed. |
| 80 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints fixed to walls and taking down old PVC /CI/Concrete pipe complete all as specified and as directed. |
| 81 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. |
| 82 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and as directed. |
| 83 | S&Fin repair floor trap size 75mm dia out let with grating including connection to waste pipe with cement jointing including taking down existing trap complete all as specified and directed. |
| 84 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed. |
| 85 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 86 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfacesCM 1:4, and finishing the surface even and smooth without using extra cement completeall as specified and directed. |
| 87 | M&L for Vitrified Ceramic tiles any colour 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15mm thick screed bed or bedding layer in cementy mortar 1:6etc complete all as specified and as directed. |
| 88 | M&L for Vitrified Ceramic tiles any colour 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1 sqm, in vertical surfaces such as skirtings/dados or risers to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in cement mortar 1:4 etc complete all as specified and as directed. |
| 89 | M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling & mass concrete in floor complete all as specified and as directed by Engineer -in-charge. |
| 90 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade and fixed with grey cement and pigment over andincluding 50mm thick sand cussion complete all as specified and directed. |
| 91 | Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 92 | M & L for existing treatment from wall and appying two coat of oil bound distemper with roller with including prepration of surface complete all as specified and as directed. |
| 93 | M&L for existing treament andapplying two coat of cement base paint on external surface complete all as specified and as directed. |
| 94 | M & L for preparation of new surfaces of wall and appying two coat of oil bound distemper with roller complete all as specified and as directed. |
| 95 | Taking down Iron/steel door frame with shutters of any description exc 4 sqmeach complete all as specified and directed. |
| 96 | S&F powder coated anodised aluminium frame for doors, windows, ventilators and partition with one or more rebates including joining cleat for fixing etc. fixed in position by means of steel screws and patent rawl plugs / bolts / hold fasts of suitable size complete all as specified and directed. |
| 97 | M&L for powder coated anodised aluminium door shutter fabricated out of aluminium section 1.60mm thick two side openable with top rail and stiles of size 83x44mm, lock and bottom rail of size 100x44mm, (two panels) with and including 5 mm thick plain colour PVC sheet (Rajshree make) and5mm thick ordinary sheet glass duly covered with tinted solar control film, including jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, anodised aluminium fittings such as hinges (B-21) handles (disc type), tower bolts (200mm long), locking device with duplicate keys complete all as specified and directed. |
| 98 | S&F for powder coated anodised aluminium window with frame complete (double shutter double leaf) side hung type with stainless steel but hinge, one shutter glazed with and including 5mm thick plain sheet glass and other shutter with stainless steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapples rubber gasket stopper aluminium grills ofaperture size of grill 70 mm, aluminium anodised handle 100mm long, aluminium anodised tower bolts 100mm long and peg stay etc complete and size of aluminium frame 100mm x 40mm x 1.55mm and shutter frame size 40mm x30mm x 1.55mm complete with all fittings etc and making good the disturbed surfaces by plastering and destempering/painting etc complete all as specified and as directed by the Engr-in-Charge. |
| 99 | S&F for Powder coated anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 100 | S&F for 4.8 to 5mm thick Sheet glass of size n.exc 0.5 Sq. m each pane, ordinary qualityincluding jointing cleats, glazing clips, rubber packing, aluminium anodised snap beading, screws, each pane complete all as specified and as directed by the Engr-in-Charge. |
| 101 | S&F for aluminium die cast body door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 Kg and fixed in repair complete all as specified and as directed. |
| 102 | S&F fancy type Stainless steel conduit curtain rod 25mm dia with fancy knob, ends and brackets complete all as specified and as directed by the Engineer-in-charge. |
| 103 | Taking downcarefully unserviceable aluminium point wiring (light, fan, socket or power) complete with fitting such as switches, ceiling roses, lamp holders, sockets, fan regulators, wooden terminal box plastic laminated sheet cover from TW battens including TW batten or drawing from existing conduit removing including TW batten all as specified and as directed by Engr-in-Charge. |
| 104 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 105 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 106 | M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke( FRLS ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed . |
| 107 | Description same as per item No 106 above but one fan point controlled by one switch & regulator. |
| 108 | Description same as per item No 106 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. |
| 109 | Description same as per item No 106 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. |
| 110 | Description all as per item No 106 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 111 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 112 | S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected. |
| 113 | S&F switch piano flush button type 15 Amp single pole one way complete all as specified and asdirected. |
| 114 | S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 115 | S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected. |
| 116 | S & F Sheet metal enclosure double door concealed suitable for distribution board when MCB to be used having 100 Amp rated bus bar 8 ways 240 volts complete all as specified and as directed. |
| 117 | S&F MCB single pole and neutral 40 Amp/63 Amp 240 V ,10KA , "C" series, connected with copper lugs complete all as specified and as directed. |
| 118 | S&F Rigid non-metallic PVC conduit 25mm dia(external) ISI marked concealed and including cutting necessary chases on wall/ceiling surface for drawing of conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts,saddles, pipe hooks etc. complete all as specified and as directed. |
| 119 | Supply and lay river bed sand free from sharp materialsa for Sand cushioning for cables 8 cm below the cable and 15 cm above the cable all as specified and directed . |
| 120 | Supply and laying GI pipe 50mm bore "LIGHT GRADE" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed. |
| 121 | Supply,laying connecting and testing in replacement of cable XLPE insulated,screened,PVC bedded galvanized steel strip or wire armoured electric power cable (heavy duty) 1100 V grade with multi stranded aluminium conductor of size 35 sqmm 4 core as per IS 7092 Pt-I completeall as specified and as directed. |
| 122 | S&F MCB single pole 6 to 32Amps 240 V,10KA, "C" series, connected with copper lugs complete all as specified and as directed. |
| 123 | S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 125 Amps "C" series complete all as specified and as directed. |
| 124 | Supply and laying un-reinforced precast.concrete cable protection cover of class LV, type-1, flat size 250mm x 150mm x 40 mm,factory madeof specified make , complete all as specified and directed. |
| 125 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for foundation etc or for shafts , wells, cesspit, manholes, pipe lines, pier holes etc n exc 10Sqm on plan and n exc 1.5m in depth & getting out in any type of soil complete all as specified and directed. |
| 126 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and directed. |
| 127 | Removing excavated at a level n.exc 50m m and depositing where directed at a level n exc 1.5m above starting point complete all as specified and as directed. |
| 128 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 129 | S & F delux Fan Regulator electronic rotary, step type 240 Volt50 Hz,complete all as specified as directed. |
| 130 | S&F exhaust fan, copper binding, steel body AC, Single Phase, 230V of size 450mm sweep, 1400RPM with blades and frame and louvers including all arrangement of making holes in wall, making good and finishing of disterbed surfaces to match with existing surfaces complete all as specified and as directed. |
| 131 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx"B" to PS . |
| 132 | M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts gradecable drawn into conduit (Existing / new)including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and as directed Note:- (a) Two runs of6 sqmm cable and one run of 6 Sqmm cable as earth leadwith conduit shall be measured as one unit length for payment. (b) New conduit and conduit accossories shall be measured separately. |
| 133 | Supply and fixing decorative gate light MOON (OPAL) made up of high grade unbreakable polycarbonate materials suitable for retrofit bulb upto 20W LED lamp complete all as specified and directed by Engr-in- Charge. |
| 134 | Supply and fixing decorative wall light fixture (FLORATE) including LED valve 10 Watts complete all as specified and directed by Engr-in- Charge. |
| 135 | Supply and fixing in repair 22W LED 6000k Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 22watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 136 | S&F LED security/street light fittings1x35W LED 5700K energy saving and envoiremental frendly long life versatile pressure die cast aluminium housing with acrylic cover as diffuser with IP 66 protection and impact resistance of IK 07 luminaire with high power LED as light siurce and electronic driver suitable for pole dia 35mm including 35mm dia light grade tube bracket, bend to shape 1.80m long with two numbers clamp of size 50mmx6mm with nuts, bolts, washers etc including connection with 1.5Sqmm two single core PVC insulated and PVC sheathed cable stranded copper conductor upto ceiling rose and fixing on wall /pole complete as ditrected by Engineer in Charge. Make: Bajaj Cat Part No BRLEP20WLEDWH or equivalent make as specified in Appendix B to particular specification. |
| 137 | S&F in replacement of 36W of size 2 feet x 2 feet LED 6500K recessed mounting luminaire glare free suitable for armstrong/grid ceiling in MS/CRCA housing with high brightness LEDs including wiring upto and terminating into existing ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 138 | S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCBcomplete all as specified and directed. |
| 139 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
