Military Engineer Services-MES has published Tender For Addition/Alteration And Special Repairs To Married Accommodation Bldg No 67And Provn Of Fire Fighting Sump For Auditorium At Icgas Daman. Submission Date for this Tender is 30-04-2024. Building Work Tenders in daman Daman And Diu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-04-2024 |
| FileName | File Description | File Size |
| 5d1bebf5-5b9d-4a7e-b7ab-82d70810501b.html | Tender Notice | 0 KB |
| 8737rar.rar | Tender Document | 0 KB |
| BOQ_726498.xls | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Demolition of plain cement concreteand pavings (unreinforced) in any position (below or above ground level) n exc 15 cm thick and removal of the same outside MD land etc complete all as specified and directed. |
| 2 | Taking down shutters onlyof any description exc. 1.00 Sqm not exc 2.00 Sqm each etc complete all as specified and as directed . |
| 3 | Taking down Chowkats or frames not exceeding 1.5 sq. m each with shutters (without taking off shutters from the frames) etc complete all as specified and as directed. |
| 4 | Taking down door/ window shutterwith frame without taking off shutters from frame of any description exc. 1.50 Sqm not exc 4.00 Sqm each etc complete all as specified and as direted. |
| 5 | M & L for Resecuring or easing & adjusting without taking down shutters of any description exc 1.00 sqm not exc 2.00 sqm each complete all as specified and directed. |
| 6 | Dismantling of wall boarding as in pelmets any thickness et complete all as specified and as directed. |
| 7 | Dismantling structural steel work including doors, gates,grills and any type etc working height n.exc 12 mtrs complete all as specified. |
| 8 | Demolition of reinforcement cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work. |
| 9 | M&L for brickwork with sub class "B" bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 including demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 10 | M&L for 15mm thick rendering in CM 1:6 internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc complete all as specified and directed. |
| 11 | M&L for 15mm thick rendering in CM 1:6 internal plaster on brick/concrete surfaces finished even and smooth without using extra cement etc including taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land complete all as specified and directed. |
| 12 | M&L for rendering in CM 1:4, 20 mm thick in two coats (15 mm under coat + 5mm finishing coat) on brick/concrete surfaces with 3% water proofing compound in finishing coat and finishing the surface even and fairincluding taking down cement plaster on brick masonry walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water and removal of debries out side from MD land complete all as specified and directed. (Note :- WPC will be measured and paid seperately). |
| 13 | Supply only integral Water Proofing Compound ISI marked all as specified & directed. |
| 14 | M&L for preparation of newly plastered surfaces of wall and applying one coat of wall primer to the surfaces and finally applying two coats of oil bound distemper, over and including 3mm thick wall care putty on walls complete all as specified and as directed. |
| 15 | M&L for preparation on new plastered surface of wall, chajja, parapet etc and applying two coats of weather proof acrylic emulsion paint over a coat of acrylic primer etc complete all as specified and as directed. |
| 16 | M&L for preparation of existing painted surfaces of walls, chajjas, parapets etc and applying one coat of acrylic exterior paint (Brand Apcolite Apex manufactured by Asian Paints or equivalent as approved by GE), as per the manufactures instructions and as directed, removing the loose materials and filled with crack sealing compound of approved make if necessary including scaffolding etc complete all as specified and as directed. |
| 17 | M&L for complete removal of existing treatment and preparation of surfaces including filling of the holes/cracks on walls with plaster putty and applying two coats of oil bound distemper paint onwalls over a coat of alkali resistant primer etc over and including 3mm thick wall care putty on walls complete all as specified and as directed. |
| 18 | M&L for preparation of old decorated surfaces and applying one coat of white wash on ceilings complete all as specified and as directed. |
| 19 | S&F for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm asin floor etc set and jointed in neat cement slurry and pointed in white or coloured to match coloured tiles over 20 mm screed bedding in cement mortar 1:4 including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 20 | S&F for glazed ceramic tiles 8mm to 10mm thick such as in floor etc area exceeding 0.18 Sqm each but not exc 0.38 Sqm each and jointed in neat cement slurry and pointed in white or coloured cement to match over and including20 mm screed bedding in cement mortar 1:4including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 21 | All as per serial item No 20 above but in skirting/dados over and including15 mm rendering as in backing coat in cement mortar 1:4including dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 22 | S&F for glazed ceramic coloured tiles 350x250x7mm/ 450x350x7mm thick on vertical surfaces such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick rendering in CM (1:4) as in backing coatincluding dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 23 | M&L for marble work (Abu plain) 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris out side from MD land all as specified and directed. |
| 24 | M&L machine cut and premirror polished kota stone slab 20 to 25mm thick as in cills/ staircase treads in single piece, laid over screed bed, set and jointed in neat cement slurry and pointed with cement and pigments to match the shade of slab complete including rubbing & polishing including 15 mm thick screed bed in CM (1:6) including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris out side from MD land all as specified and directed. |
| 25 | M&L machine cut and premirror polished kota stone slab 20 to 25mm thick as in vertical surfaces like risers, skirtings etc, fixed and jointed in neat grey cement slurry and pointed withcement and pigments to match the shade of slabincluding 20 mm thick screed bed in CM (1:6) including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris out side from MD land all as specified and directed. |
| 26 | M&L black Cudappa stone slab 20 to 25mm thick as in shelves, partitions etc, laid and jointed in neat cement slurry and pointed with cement and pigments to match the shade of slabincluding rubbing & polishing cutting of brick walls & making good in including 15 mm thick screed bed in CM (1:6) including dismantling of old stone slabs and tiles of any description or thickness in floors, aprons etc. and removal of debris out side from MD land all as specified and directed. |
| 27 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 28 | M&L for extra for two nos grooves over staircase treads complete all as specified and directed.Note : Two nos grooves will be measured and paid as one unit. |
| 29 | M&L for grinding & mirror polishing existing kota stone flooring. |
| 30 | M&L 100 mm thick cement concrete type C-2, 1:3:6 using 40 mm graded stone aggregate as sub base all as specified and as directed. |
| 31 | M&L Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment over and including 50mm thik crushed stone sand and including dismantling of old stone sett / interlocking paver tiles of any description or thickness laid dry or laid dry and pointed all as specified and as directed. |
| 32 | M&L for cement concrete as in road kerbs or copings and the like of Type B1, 1:2:4 (using 20mm graded stone aggregate) round or chamfered on edge including necessary use and waste of formwork. |
| 33 | M&L mild steel of gde Fe 410-0 as in hold fast fixed to steel/wood door/widow frames including tarring and sanding etc complete all as specified and as direted . |
| 34 | S&F 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought framed, rebated on the solid,single or double rebate rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as direted. |
| 35 | S&F 30mm thick flush shutters,solid core construction,with block board core and plywood face panels,commercial type on both sides etc complete all as specified and as directed . |
| 36 | S&F 30 mm thick 2nd class hard woodglazed and skeleton shutters openrebated and prepared to receive glass and gauze etc but divided into squares with plain ,chamfered or rounded, metred and rebated sash bars any numbersas specified in SSR part I section 8 , clause 8.24 (a) to fitted to chowkhats. |
| 37 | S & F factory made PVC solid PVC door frame chowkhat size 50mm x 47mm made out of 5 mm plain colour PVC sheet rainforced with MS square tube, supplying and fixing in opening complete all as specified and as directed. |
| 38 | S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frames shall covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and both sides prelaminated PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail, panelling, of both sides prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading, and jointed together with solvent cment, styles and rails feathered at edges, supplying & fixing in the frame at site as per specification and drawing. |
| 39 | S & F stainless steel butt hinges medium weight 100 mm size in any position all as specified and as directed. |
| 40 | S&F 75mm long butt hinges, stainless steel, medium weight fixed with stainless steel screws and galvanised mild steel hinge pins complete, all as specified and directed. |
| 41 | S&F aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed. |
| 42 | S&F aluminium anodised barrel tower bolt of extruded section 100 mm long fixed in any position etc complete all as specified and as direted. |
| 43 | S&F extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed . |
| 44 | S&F extruded aluminium alloy handle fabricated type anodised 100 mm long fixed in any position etc complete all as specified and as directed . |
| 45 | Supply and fix 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed . |
| 46 | S&F aluminium alloy body and tongue, anodised floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed . |
| 47 | Supply only for Brass Door Viewer 180 Degree Glass Lens with Perfect Matching Main Door complete all as specified and as directed . |
| 48 | S & F 100 mm sizealuminium anodised hasp & staplesfixed with screws etc complete all as specified and as directed by EIC. |
| 49 | M&L for preparation of new wood surfaces of any description exc 10cm width or girthand applying two coats of synthethic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 50 | M&L for standard aluminium section "heavy grade" powder coated of approved colour as in sliding windows, Ventillators, partitions and doors frames, shutters of required sizesincluding, rubber gasket, PVC wheel with ball bearing, concealed type lock and fixing of glass complete all as specified and directed.Makeof aluminium section - ""Jindal/ Indalco/ Hindalco. (Note: (i)The measurement shall be recorded weight of aluminium section only and rate quoted shall deemed inclusive of rubber gasket, rubber beading, PVC wheel with ball bearing, concealed type locks, handle etc(ii) Glass shall be measured and paid separately as supply only. |
| 51 | S&F 5.00 mm thick float glass fixed in aluminium sliding window shutters etc complete all sas specified and directed. |
| 52 | S&F Solar controlled film 50 micron reflective type sticked to glass as per instructions of manufacturers all specified and directed. |
| 53 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and as directed. |
| 54 | S&F aluminium anodised XPM grill aluminium alloy DG 202 grill 4.8 mm thick (in the shape of expanded metal of aluminium XPM jalli) opening size 59mm (length expansion) and 45 mm (width expansion) fixed in and including E/H frame all as per manufacturers instruction and as directed. |
| 55 | S&F 4.00 thick frosted glass fixed in ventilators etc in required sized, complete all as specified and as directed |
| 56 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples on exisitng wooden beading etc complete all as specified and directed. |
| 57 | S & F in repair concealed type locks suitable for aluminium sliding windows of approved colour and pattern and fixed as directed etc complete all as specified and directed. |
| 58 | S & F in repairs Nylon ball bearings fixed to aluminium sliding windows/doors of approved make and pattern etc complete all as specified and directed. |
| 59 | Supply and fix in repairs, 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolt and sliding of extruded sections or cast aluminium alloy etc complete all as specified and as directed . |
| 60 | S&F in repairs aluminium anodised barrel tower bolt of extruded section 200 mm long fixed in any position etc complete all as specified and as directed. |
| 61 | S&F in repairs extruded aluminium alloy handle fabricated type anodised 150 mm long fixed in any position etc complete all as specified and as directed. |
| 62 | S&F in repairs aluminium alloy body and tongue, anodised floor door stopper 150 mm long with hard drawn spring fixed in any position etc complete all as specified and as directed. |
| 63 | S & F in repairs 100 mm sizealuminium anodised hasp & staplesfixed with screws etc complete all as specified and as directed. |
| 64 | M&L 18mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and as directed . |
| 65 | M&L for 6mm thick teak wood lipping fixed with nails etc complete all as specified and as directed . |
| 66 | M&L for french polishing on surfaces of any description, width or girth including cleaning and preparing the surface etc complete all as specified and as directed . |
| 67 | M&L for 0.9mm thk Decorative laminate type I of surface finish ,colour and pattern as approved fixed with approved adhesive all as per makers instructions and etc complete all as specified and as direted. |
| 68 | S & F in repairs 20 mm dia Aluminium Powder coated curtain rods cut to lengths as required and fixed including brackets as directed etc complete. |
| 69 | M&L for preparation of old painted wooden surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed . |
| 70 | S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished etc complete all as specified and as direted . |
| 71 | S&F magnetic catcher of approved sizeand pattern fixed to shutters etc complete all as specified and directed. |
| 72 | M&LFormwork Rough finished surfaces of flat concrete to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 73 | M&L RCC Nominal mix Type B1 1:2:4(20 mm graded aggregate)as in chajjas complete all as specified and directed. |
| 74 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified as directed. |
| 75 | M&L Mild steel TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified as directed. |
| 76 | M&L Mild steel TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified as directed. |
| 77 | M&L for Framed work such as grills, gratings, etc, with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290. Gde E-165 etc all as specified and directed. |
| 78 | M&L for preparation of new steelsurfaces exc 10cm width and girth and applying two coats of synthetic enamel paint over a coat ofprimer etc complete all as specified and as directed. |
| 79 | M&L for scrubbing and removing all the dirt and rust from the old steel surfaces exc 10cm width or girth and then applying one coat of synthetic enamel paint complete all as specified and as directed . |
| 80 | Supplying an laying 16mm dia CPVC pipe SDR 13.5 & plain CPVC SDR 11 fittings on walls and ceiling or laying under floors including taking up/down GI 15 mm dia bore medium grade galvanized steel tubing with all fittings from old positions all as specified and directed. |
| 81 | S&F in repairs20mm dia bore medium grade galvanised steel tubing with all fittings fixed to walls, ceilings or laid under floors complete all as specified and directed. |
| 82 | S&F PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors including dismantling of cast iron pipes of any description with fittings fixed to walls or laid in floors/trenches complete all as specified and directed. |
| 83 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls with fastners including dismantling of cast iron pipes of any description with fittings fixed to walls or laid in floors/trenches complete all as specified and directed. |
| 84 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls with fastners including dismantling of cast iron pipes of any description with fittings fixed to walls or laid in floors/trenches complete all as specified and directed. |
| 85 | S&F PVC (SWR) bends any radius 75mm dia. |
| 86 | S&F PVC (SWR) bends any radius 75mm dia with access door. |
| 87 | S&F PVC (SWR) bends any radius 110mm dia. |
| 88 | S&F PVC (SWR) bends any radius 110mm dia with access door. |
| 89 | S&F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia with access door |
| 90 | S&F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia with access door |
| 91 | S&F PVC (SWR) branch piece, double (double Y), equal or unequal 75mm dia |
| 92 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia |
| 93 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door |
| 94 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia |
| 95 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door |
| 96 | S&F PVC (SWR) vent cowl 75mm dia |
| 97 | S&F PVC (SWR) vent cowl 110mm dia |
| 98 | M&L Cast iron floor/nahani trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and as directed. |
| 99 | M&L Cast iron floor/nahani trap 100mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) etc complete all as specified and as directed. |
| 100 | M&L for PCC 1:5:10 using 40 mm graded stone aggregate mixing with WPC as in filling and mass concrete in sunken portion etc complete all as specified and as directed. |
| 101 | S&F in repairs waste coupling 32mm brass chromium plated ISI for WHB/sink complete all as specified and directed . |
| 102 | S&Fin repairssink with drainage board made of stainless steel 1 mm thick kitchenwith plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe over all size not less than 915mm x 460mm and bowl size not less than 410mmx330mmx160mm, complete all as specified. |
| 103 | S&F in repairs stainless steel plate rack standard size 31X36X10 inch ,complete and fixing with rawl plug and steel screws , complete all as specified and as directed. |
| 104 | S&F in repairs standard size EWC white colour with P/S trap white coloured with and including PVC white colouredseat cover,10 ltr capacity PVC valveless,syphonic action type, low level flushing cistern with inlet, ball valve, float valve and handle including brackets including all connecting to flushing cistern. |
| 105 | S&F in repair vitreous china WHB white, flat back size 550mm x 400 mm including cutting for and pinning in ends of CI brackets, pillar taps etc and making good wall or floor fitting to match existing surface complete all as specified and directed. |
| 106 | S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed. |
| 107 | S&F in repairs Health Faucet with 1 meter CP flexible tube & hookand all necessary fittings all as specified and directed. (Make: Prayag) |
| 108 | S&F in repairs 2 way bib cock double handle with flange and all necessary fittings all as specified and directed.(Make: Prayag) |
| 109 | S&F in repair chromium plated fancy typebib tap 15mm complete at any position etc complete all as specified and as directed. |
| 110 | Supply & fix in repairs Pillar tap cast copper alloy with capstan head, fancy type, chromium plated screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete15 mm dia suitable for WHB complete all as specified and directed by Engr-in-Charge. |
| 111 | S&F in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterflyhandle screwed both ends etc complete all as specified and as directed . |
| 112 | S&F in repairs bathroom shelf of PTMT fixing with and including chromium plated brass screws and wooden plastic cleats (minimum weight 300gms) to plastered/tiled walls etc complete all as specified.(Make: Prayag) |
| 113 | S&F in repair towel rail 600 mm long of PTMT fixed with and including Chromium plated brass screws and wooden / plastic cleast.(Minimum weight 170 gms) |
| 114 | S&F in repair towel ring of long PTMT fixed with and including chromium plated brass screwes and wooden/plastic cleats (minimum weight 90gms) complete all as specified and directed. |
| 115 | S & F in repair looking mirror 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plgs with chromium plated brass screws and cup washers complete all spd and directed by Engr-in-Charge. Make ; Atul/Saint Gobain/Modi Guard. |
| 116 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 117 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 118 | S&F in repairsgrating doom 125 mm dia of PTMT (Minimum weight 40 gms) with waste hole complete all as specified and directed. |
| 119 | S&F in repairs 32mm dia Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixedcomplete all as specified and directed . |
| 120 | S&F in repair white colour PVC drain pipe long socket waste pipe for wash basin / kitchen sink water outletcomplete all as specified and directed. |
| 121 | Dismantling of mud phuska or concrete bedding including Complete removal of existing water proofing treatment and cleaning of original roof by brooming, washing and roughening roof surfacecomplete all as specified and directed |
| 122 | Material and labour PCC 1:2:4 type B-1 using 20mm graded mechanically crushed stone aggregate complete all as specified and directed. |
| 123 | M&L for 15mm thick screed bed in CM (1:4) laid on roof surfaces mixed with itegral water proofing compound @ 3% by weight of cement, including finishing the surfaces even and smooth without using extra cement.(Note: WPC shall be measured and paid separately at supply ratesall as specified and directed. |
| 124 | M&L for WPT to non accessible RCC roof slab/chajja/canopy/parpet etc or accesible roofto be executed surface thoroughly wire brushed, washed and dried up and cleaned of all foreign matter and dust to receive Shalitex primer @300 gms/sqm for laying 3.00 mm thick super thermolay (APP modified membrane with polyster reinforcement) 3.6 Kg/Sqm laid by torch application method and 75mm overlap in longitudinal direction and 100mm in transverse direction, a coat of silver shield (solar reflective aluminium paint) @ 0.12 Kg/Sqm all as per mfgs instructions etc complete all as specified and as directed.Make- Tikitar, STP texas, Shivam Hyperplast, Pidelite all as specified and directed. |
| 125 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil all as specified and as directed. |
| 126 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and as directed. |
| 127 | Excavating in trenches, n exc 1.5 m wide and exceeding 1.5m but n exc 3 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as specified and as directed. |
| 128 | M & L for cement concrete 1:4:8 type D-2 using 40mm graded coarse stone aggregates as in foundaton filling and mass concrete all as specified and as directed. |
| 129 | M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough fininshed flat surfaces of concrete, complete all as specified and as directed. |
| 130 | M & L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair fininshed flat surfaces of concrete, complete all as specified and as directed. |
| 131 | M & L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. for fair finished surfaces, complete all as specified and as directed. |
| 132 | M & L for formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for fair finished surfaces, complete all as specified and as directed. |
| 133 | M & L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for fair finished surfaces, complete all as specified and as directed. |
| 134 | M & Lfor Reinforced Cement Concrete M-30 design mix (using 20mm graded coarse stone aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. |
| 135 | M & Lfor Reinforced Cement Concrete M-30 design mix (using 20mm graded coarse stone aggregates) as in columns , pillars, piers, post and structs complete all as specified and as directed. |
| 136 | M & Lfor Reinforced Cement Concrete M-30 design mix (using 20mm graded coarse stone aggregates) as in walls, retaining walls, basement walls, ballast walls, and the like any thickness above top of footing including attached pilasters and buttresses complete all as specified and as directed. |
| 137 | M & Lfor Reinforced Cement Concrete M-30 design mix (using 20mm graded coarse stone aggregates) as in slabs supported on walls, beams and columns in floor/roof, landing, balconies canopies, deck slabs and as in shelves complete all as specified and as directed. |
| 138 | M&L for preparation of newly plastered surfaces of wall and applying one coat of alkali resistant primer and finally applying two coats of oil bound distemper, complete all as specified and as directed. |
| 139 | Removing excavated material exc 200m but not exc 500m and depositing where directed at any level complete all as specified and as directed. |
| 140 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed. |
| 141 | Materialand labour for point wiring, in repairs complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawnthroughand including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modularswitches , sockets,fan regulators etc. including modular plate coverof required size with necessarystainless steel cadmium platedscrews andincluding 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One light point/ Fan Point controlled by one switch. |
| 142 | Materialand labour for point wiring, in repairs complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawnthroughand including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modularswitches , sockets,fan regulators etc. including modular plate coverof required size with necessarystainless steel cadmium platedscrews andincluding 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . |
| 143 | Materialand labour for point wiring, in repairs complete with 1.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawnthroughand including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modularswitches , sockets,fan regulators etc. including modular plate coverof required size with necessarystainless steel cadmium platedscrews andincluding 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board . |
| 144 | Materialand labour for point wiring, in repairs complete with 2.5 sqmm PVC insulated, FRLS type, ISI marked,conforming to IS-694/1990 unsheathed, concealed wiring multistranded,single core, copperconductor cable 1100 volts grade colour code cablesdrawnthroughand including PVC conduit size not less than 25 mm dia medium grade such as Tee ,Corner, overlaping connector etc.along the suface of walls/roofs/ ceilings/floors etc including concealed PVC box for fixing of and including modular plate as per no of switch modules flush mounted suitable for fixing modularswitches , sockets,fan regulators etc. including modular plate coverof required size with necessarystainless steel cadmium platedscrews andincluding 1.5 Sqmm PVC insulated, multistranded, FRLS type,unsheathed (Green colour),single core, copper conductor cable as earth continuity conductor andconnecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switchon independent board. |
| 145 | Supply & fixing modular type switch 6 Amps ,1way,1 module. |
| 146 | Supply & fixing modular Switch socket Combination 16A, 6 pin, 3 module |
| 147 | Supply & fixing modular type Switch socket combination 2 in 1, 5 A flush type |
| 148 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body all as specified and as directed. |
| 149 | Supply & fix modular type fan regulator stepped type 120 W- 2 module suitable for 1200mmto 1400mm sweep ceiling fans all as specified and as directed. |
| 150 | Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 151 | Supply and fix LED mirror light along with fixture,10 watts, 220V,with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 152 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 153 | Taking down and refixing of ceiling fan 1200mm sweep to 1400mm sweep of any make from its existing position after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body capacitor, holder, terminal adoptor, screws nuts and washers etc replacement of spare parts/accessories such as ball bearings, gun metal bushes, capacitor, conopy top and bottom shackle clip assembly, rewinding of fan motor, painting andincluding hanging / fixing back in existing location and making cable connections and testing for its satisfactory performance complete all as specified and directed. |
| 154 | Taking down and refixing of exhaust fan 250mm sweep to 300mm sweep of any make from any height after disconnecting of electric connection for carrying out repairs including servicing, overhauling, greasing etc after cleaning the body internally and externally with cleaning agent and renewal of spare parts such as split pins, capacitor holder, terminal adaptor, nuts, bolts and washers etc and replacement of components / accessories such as ball bearing, gun metal bushes, capacitor, rewinding of fan motor including fixing back in exiting location and making cable connections and testing for its satisfactory performance complete all as specified and directed. |
| 155 | S&F copper conductor cable 3 core 1.5 Sqmm PVC insulated, sheathed flexible multistranded 1100 Volts grade for making connection to ceiling fan from ceiling rose complete all as specified and as directed. |
| 156 | Taking down storage type electric water heater (Geyser)25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric connection and water pipe connections andfixing back in same location and makingwater pipe connections and cable connections and testing for its satisfatory functioning complete all as specified and directed. |
| 157 | Supply and fix LEDwall mounted street light 35watts New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 with suitable size of wall mounted GI bracket, clamps nuts and washer complete all as specified and directed. |
| 158 | Material and labour forearthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected togalvanized steel strip 25 x 4 mm size by means of bolts, nuts, check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, light grade, and 40 mm bore galvanised iron light grade for earth strip protectionincluding all excavation earth work in any type of soil, PCC pit in PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) and RCC 1:2:4, type B1 (using 20 mm graded stone aggregate)for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm),with charcoal, salt, funnel complete all as shown in the electrical plate No 3 of SSR part –I and testing of earthing on completion complete all as specified & directed. Note:- Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length. |
| 159 | Supplying, fixing, testing and commissioning of Booster pumps for 440 V, 3 Phase, 50 Hz Confirming to IS- 12469 :1988 With CI Casing bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for 440 volts, 3 phase, 50 Hz 30m head, 450 LPM discharge complete all as specified and as directed. |
| 160 | Supplying, laying and testing of GI tubing of size 50mm dia medium grade in any length with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc laid in trenches/on walls /floors/road cross complete all as specified and as directed. |
| 161 | Supplying, laying and testing of GI tubing of size 40mm dia medium grade in any length with all GI fittings such as bend, tee, short piece, socket, union, nipple, connector, elbow etc laid in trenches/on walls /floors/road cross complete all as specified and as directed. |
| 162 | Supplying, fixing and testing of DOL starter three phase, 415 Volts, 50Hz for 7.5 HP pump set complete with inbuilt accessories such as contactor, relay etc and fully prewired in sheet steel enclosures and connecting to the existing system including testing complete all as specified and as directed. |
| 163 | S & F cast iron non return valveof size 50mm dia complete all as specified and as directed. |
| 164 | S & F gun metal foot valveof size 50mm diawith check nuts complete all as specified and as directed. |
| 165 | S & F gun metal globe or gate valve of size 50mm diawith iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and as directed. |
| 166 | S & F gun metal globe or gate valve of size 40mm diawith iron wheel head, screwed both ends for iron pipes and fixed complete all as specified and as directed. |
| 167 | S & F for PVC insulated, PVC sheathed cable galvanised steel strip or wire armoured electric control cable heavy duty with stranded copper conductor of size 4 core 4 Sqmm complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
