Military Engineer Services-MES has published Tender For Additional/Alternator To Building No P 521 And P522 At Af Stn Chabua In Domestic Area Under Ge (Af) Chabua. Submission Date for this Tender is 23-04-2024. Building Work Tenders in chabua Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 15-Apr-2024 | Other Corrigendum | Other | 23-04-2024 |
| Sl. No. | Item Description |
| 1 | SCH "A" PART-I B/R |
| 2 | Taking down chowkat with shutters of any description without taking off shutters from framearea exc 1.50 but not exc. 4.0 Sqm each complete all as specified and directed. |
| 3 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 4 | Dismantling wrought iron or mild steel work of any description not otherwise for complete all as specified . |
| 5 | Taking down roof trusses, coupled rafters or trussed beams above 4 mtr and upto 8 mtr span including housing and fixing trusses etc. after repairs including tightening up wedges, cotters bolts etc. for height upto 5 Mtr including necessary scafolding / raising / lowering complete all as specified and directed. |
| 6 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 7 | Taking down cement plaster on brick or stone walls etc including racking out joints hacking for key and scrubbing down with water etc complete all as specified and as directed. |
| 8 | Demolition of cement concrete unreinforced in ground floors and pavingsn.exc 15 cm thickness (above or below GL) complete inclusive of removal of debris out side defence land all as specified and as directed. |
| 9 | Dismantling floor hearth and wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises, complete all as specified and directed. |
| 10 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed. |
| 11 | S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc.,complete all as specified and directed. |
| 12 | M&L for Plain cement concrete type C-1 1:3:6 (using 20mm graded aggregates) for filling pressed steel chowkats complete all as specified and directed. |
| 13 | S&F for 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 14 | S & F 35mm thick factory made Ind class hard wood glazed and skeleton shutters , open rebated and prepared to receive glass , gauze etc divided in square with plain , chamfered or rounded mitred and rebated sash bars any number , edges of framing plain , chamfered or rounded , fitted with cut and mitered beads for securing glass etc , complete all as specified in SSR Part I section 8 , clause 8.24 ( a ) fitted to chowkat complete all as specified and as directed by Engr-in-charge. |
| 15 | S&F for 200 mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed. |
| 16 | S&F for 150 mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed. |
| 17 | S&F 150 mm long anodized aluminium handles, cast type complete all as specified and as directed. |
| 18 | S&F 100 mm stainless steel butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed. |
| 19 | S&F 300mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 20 | S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework or water tanks and similar work confirming to Fe 290 Gde-E-165 complete all as specified and directed. |
| 21 | S&F anodised aluminium window shutters in three track sliding (whichever the case may be ordered to sliding horizontally or vertically) with two or more shutters with sliding arrangement with two or more shutter rubber beading and glazing clips using aluminium sections weighing not less than 0.55 Kg/Mtr etc complete and inclusive ofnecessary hardware i.e. locking mechanism, handle and 4.8mm thick selcted quality glass for glazing and stainless steel wire cloth 0.71mm dia with width of aperture 1.18mm including necessary gasket / neoprene / rubber packing / beading etc all as specified and directed. |
| 22 | S&F anodised aluminium ventiator with louvers withpartially guaged shutter using 5 mm thick x 10 cm wide frostedglass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M including fosted glass louvers and allied items to facilitate louver action etc complete all as specified and as directed. |
| 23 | S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles.MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails.MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC "C" channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thickprelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg give on page 146 of SSR 2004 part 11.The width of stiles and rails shall be as specified in para 8B.2.1 on page 134 of SSR 2004 part 11.Each PVC door shutter leaf consist of 4 Nos 100 mm long MSbutt hinges. complete all as specified and directed. |
| 24 | S&F Factory madewood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mmprelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in sketch on page 150 of SSR 2004 Part 11 complete all as specified and directed. |
| 25 | M&L for MS structural steel work, framed as in trusses, purlins, rafter, post, cleats etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and directed. |
| 26 | S&F gusset plates, angle, cleats, etc incl necessary welding drilling for fixing complete all as specified and directed. |
| 27 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or "J"/"L"hooks complete all as specified and directed. |
| 28 | All as per item No. 27 here-in-before but plain sheet as in ridges, gutters, facia bd etc complete all as specified and directed. |
| 29 | M&L for preparation of new steel surfaces of any description of Iron surfaces, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 30 | M&L for preparation of new wooden surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 31 | M&L for brick work with sub class "B" bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 32 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and directed. |
| 33 | M&L forPCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 34 | M&LforPCC 1:2:4 type B -0 (using 12.5mm graded stone aggregate) as in coping and kerbs etc including necessary formwork etc complete all as specified and directed. |
| 35 | M&L for rendering 15mm thick in CM 1:4 (in two coats 10mm thick in CM 1:4 and 5mm thick finishing coat in CM 1:4 using water proofing compound as per manufacturer"s instruction)on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified and as directed. Note : Supply of integral water proofing compound will be measured and paid for separately under respective item of schedule. |
| 36 | M&L for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed. |
| 37 | Supply only Integral waterproofing compound. |
| 38 | M & L for preparation of newly plastered surface of wall and applying two coats of OBD of approved tint and pattern over one coatof primer over and including a coat of 2mm thick wall care putty on wallcomplete all as specified and directed |
| 39 | M&L for preparation of old plastered surfaces of wall and applying one coats of oil bound distemper including filling depressions of walls with wall care putty complete all as specified. |
| 40 | M&L preparation of new plastered surfaces of wall and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in comouflage pattern complete all as specified and directed. |
| 41 | M&L complete removal of old treatment of old existing surfaces of wall and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) in comouflage pattern inclusive of filling depressions with exterior grade wall putty all as specified. |
| 42 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 43 | M&L for PCC (1:2:4) type B-1, (Using 20 mm graded stone aggregates) 25 mm thick as in levelling course / sub base complete all as specified and directed. |
| 44 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in basin platform and urinal partition inclusive of cutting chases / holes if ordered as counter of wash basin platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granitecomplete all as specified and directed. |
| 45 | M&L for machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete as supports of granite counter / platforms inclusive of grinding of exposed edgescomplete all as specified and directed. |
| 46 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15 mm thick screed bed layer in CM (1:6)complete all as specified and directed. |
| 47 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in skirting and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 10 mm thick backing coat in CM (1:4)complete all as specified and directed. |
| 48 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , as in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile over and including 15 mm thick screed bed layer in CM (1:6) complete all as spd and directed. |
| 49 | M&L for glazed coloured ceramic tiles of size 450 x 300 x 7 mm thick on vertical surfaces, set and jointed in neat cement slurry and pointed with white cement to match the coloured tiles including 10 mm thick rendering in CM (1:4) for vertical sub base complete all as specified and directed. |
| 50 | M&L for providing 75 mm thickPCC 1:3:6 type C-2 (using 40 mm graded stone aggregates) as in plinth protection complete all as specified and directed. |
| 51 | M&L for Gl frame work (snap grid) for false ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm longcomplete all as specified and directed. Note: Ceiling tiles/board shall be measured and paid sepreately under respective items. |
| 52 | M&L for 4 mm thick non asbestos cement boards as in false ceiling with exposed face printed with pattern to match existing ceiling boards and painted / white laminated, fixed to GI snap grid frame work as in ceilings complete all as specified and directed. |
| 53 | S&F rotional molded polythylenewater storage tank 1000 ltr capacity 3 layered (Cylinderical vertical with closed top) with tank nipple 20mm bore hoisted and fixed in position complete all as specified and directed. |
| 54 | S&F 20mm bore ball brass valve, high pressure with polythene float and fly nut completescrewed for iron pipe or brass ferrule complete all as specified and directed. |
| 55 | S&F 20mm dia gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 56 | S&F bevelled edge mirror of selected quality mounted on plastic frame covered back with commercial and fixed on wooden plug with chromium plated brass screws and cup washer complete all as specified and directed. |
| 57 | S&F 15mm bore steel tubing fixed on wall / floor including all fittings and necessary cutting of chases for concealed portion etc complete all as specified and directed. |
| 58 | S&F 20mm bore steel tubing fixed on wall / floor including all fittings complete all as specified and directed. |
| 59 | S&F 15mm bore chromium plated bib cock fancy type,complete all as specified and directed. |
| 60 | S&F 15mm bore chromium plated angle cock fancy type, complete all as specified and directed. |
| 61 | S&F 15mm bore chromium plated pillar cock fancy type, complete all as specified and directed. |
| 62 | S&F 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock with long shank and cup (concealed type) screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed. |
| 63 | S&F brass chromium plated over head shower rose with arm 125 mm size with long body with swivel joint including fixing to steel pipe or union, complete all as specified and as directed. |
| 64 | S&F water closet (Squatt Pattern) complete including provn of cement concrete bedding Orissa pattern size 580x440mm white integral foot rests (excluding flush pipe or flushing cisterns) including connection to trap and to flushing pipe anti syphonage pipe etc and making good to floor complete all as specified and directed. |
| 65 | S & F vitreous china wash down water closet pan ( pedestal pattern ) coloured ( including two Nos fixing bolts incl plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device but excluding flushing cistern and flush pipe ) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etcincluding making good to floor with and including fixing of P or S trap , complete all as specified. |
| 66 | S&F vitreous china urinal, half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including chromium plated spreader and chromium plated waste coupling 32mm dia complete all as specified and directed. |
| 67 | S&F vitreous china flat back or counter type wash basin, white of size 550 x 400 mm including brackets, complete all as specified and directed. |
| 68 | S/F brass chromium plated waste coupling 32mm dia complete all as specified and directed. |
| 69 | S&F PVC connection 15 x 450mm complete all as specified and directed. |
| 70 | S/F PVC waste pipe for 32 mm dia complete all as specified and directed. |
| 71 | S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / wallscomplete all as specified and directed. |
| 72 | S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors / wallscomplete all as specified and directed. |
| 73 | S&F 110mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door,complete all as specified and directed. |
| 74 | S&F 75mm PVC (SWR) (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access door,complete all as specified and directed. |
| 75 | S&F 110mm PVC (SWR) reducer, complete all as specified and directed. |
| 76 | S&F 110mm bore PVC (SWR) branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches |
| 77 | S&F PVC (SWR)Nahani trap 75mm bore with SS grating with or without holes incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed |
| 78 | S&FPVC (SWR)gully trap 150 x 100 quare or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as directed |
| 79 | S&F PVC (SWR)cowl 75/100mm dia as required complete all as specified and directed. |
| 80 | S&F 110mm bore PVC (SWR) junction double, (double T), equal or unequal with access door complete all as specified and directed. |
| 81 | S&F PVC(SWR) Coupler 75/110 mm dia complete all as specified and directed. |
| 82 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed. |
| 83 | M&L for cement concrete type C-2 1:3:6 (using 40mm graded aggregates) as in foundations, filling and mass concrete complete all as specified and directed. |
| 84 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / loose soil complete all as specified and directed. |
| 85 | M&L for broken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 86 | M&L for 100mm thick cement concrete type C- 2, 1:3:6 (40mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 87 | M&L for 60mm thick rubber moulded coloured glossy finish precastcement concrete interlocking pavers blocks / tiles Grade M-35 made with grey cement andno pigment manufactured by automatic hydraulic compression with high compressive strength ,any size, pattern and shape as approved by GE complete all as spd anddirected |
| 88 | M&L for sand cuhiioning / filling under floors or in foundations including watering and consolidation complete all as spd anddirected |
| 89 | Excavating over areas, n exc 1.5 m deep and getting out in soft / loose soil complete all as specified and directed. |
| 90 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed. |
| 91 | Removal excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 92 | M&L for brick work with sub class "B" Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:4 complete all as specified and directed. |
| 93 | M&L for TMT bar 8mm dia and over cut to length bent to shape reqd incl cranking bending etc complete & binding with MS wire (annealed) not less than 0.9mm dia in reinforcement (@ 150MM c/c both ways) complete all as specified and directed. |
| 94 | M&L for cement concrete type B1 1:2:4 (using 20mm graded stone aggregates) in precast cover slabs for manholes cover and similar articles with plain faces etc set in cement mortar 1:4 including use and waste of formwork complete all as specified and directed. |
| 95 | M&L for 15mm thick rendering in CM 1:4 for internal / external wall of manhole surfaces complete all as specified and directed. |
| 96 | M&L for PCC 1:3:6 type C2 (Using 40mm graded stone aggregates) as in surface channels and drains complete all as specified and directed. |
| 97 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 98 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out, complete all as specified and directed. |
| 99 | M&L for 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with colars laid in trenches and jointed as specified complete all as specified and directed. |
| 100 | M&L for concrete bed to drainpipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C2 using 40mm graded stone aggregate complete all as specified and directed. |
| 101 | Cutting into existing manholes for connecting new drain, making good to pipe 150 mm bore and rendering cutting out existing benching for and formingbranch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) smooth finished, and reforming benching as required complete all as specified and directed by Engr-in-Charge. |
| 102 | SCH "A" PART-II E/M |
| 103 | Taking down copper /aluminium point wiring (light, fan,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing m,aterials to store for keeping in safe custody or for taking credit ( credit a for above items should be made as per condition seperately ) and making good distrubed surfaces ofwalls, floors etc. |
| 104 | Taking down carefully copper/aluminium Sub main wiring of any size fromsurface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 105 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site. |
| 106 | M&L for point wiring with 1.5 Sqmm PVC insulated and unsheathed FRLS single core multistranded copper conductor point in and including PVC rigid non metalic concealed conduit 19/20mm dia, medium duty, ISI marked to be teminated in pressed steel terminal boxes including 1.5 Sqmm PVC inslulated and unsheathed FRLS single core multistranded copper earth continuity conductore controlled by one switch and / or one regulator complete for following items complete all as specified and directed. |
| 107 | All as per ser item No.104 (here-in-before) but one 3pin socket out let 5 Amps on the same board complete all as specified and directed |
| 108 | All as per ser item No.104 ( here-in-before) but one 3pin socket out let 5 Amps on the Independent board complete all as specified and directed |
| 109 | All as per Srl items No.104 (here-in-before)but point wiring with 2.5 Sqmm for15 AmpsSocket out let with 2.5 sqmm earth continuity.complete all as specified and directed |
| 110 | Supply and fix modular switch 1 way, 6 amps, 1 modulecomplete all as specified and directed |
| 111 | Supply and fix modular switch 1 way, 16 amps, 1 modulecomplete all as specified and directed |
| 112 | S/F modular socket, 6 Amps, 2/3 pin combined 2 module complete all as specified and directed |
| 113 | S/F modular socket, 6/16Amps, 2/3 pin combined 2 modulecomplete all as specified and directed |
| 114 | S/F modular fan regulator, 120 watt, 2 modulecomplete all as specified and directed |
| 115 | S&F ceiling rose surface backelite three terminals, PVC/polycarbonate, insulated bodycomplete all as specified and directed |
| 116 | Supply and fixing in replacement LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. rose complet |
| 117 | Supply & Fixin replacement Factory made, sheet steel distribution boards,VTPN, 4 Ways, 415 Volts double door type, protection class ( IP-42) suitable for mounting MCB DBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus barcomplete all as specified and directed. |
| 118 | Supply and fix MCCB,3 Pole, 63 Amps , with breaking capacity 25KA , Thermal magnetic trip Unit,fixedthermal Fixed magnetic (FTFM), Ics=100% Icu,AC 415 volt ,50 HZ complete all as specified and as directed. |
| 119 | Supply & Fix in replacement Factory made, sheet steel distribution boards,SP and N, 4 Ways, 240 Volts double door type, protection class ( IP-42) suitable for mounting MCB DBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus barcomplete all as specified and as directed. |
| 120 | Supply & Fixin replacement Factory made, sheet steel distribution boards,SP and N, 8 Ways, 240 Volts double door type, protection class ( IP-42) suitable for mounting MCB DBs confirming to IS-13032, IS-8623, BS-5484 with min 200 Amps rating copper bus barcomplete all as specified and as directed. |
| 121 | S&F MCB SP 240 volt 6 to 32 Amps "c" series 10 KA complete all as specified and directed at site. |
| 122 | S&F MCB DP 240 volt 40 Amps "C" Series 10 KA complete all as specified and directed at site. |
| 123 | S&F MCB DP 240 volt 32 Amps "C" Series 10 KA complete all as specified and directed at site. |
| 124 | Supply and draw submain wiring with two single core 4 sqmm FR PVC insulated copper cable 1100 volts grade multistrand, unseathed conductor drawn into FR PVC casing and caping and all necessary fittings including 4 sqmm multi strand FR PVC insulated copper wire for earth continuty conductor connected to common earth dollycompleteall as specified and directed. (Notes: 3 runs of 4 sq mm cable and 1 run of PVC conduit shall be measured as one unit) |
| 125 | Supply and fix in repair factory made sheet metal enclosure single pole & neutral with a two pin & earth plug and socket of 20 amps capacity complete all as specified and directed at site. |
| 126 | M &L for GI Earthing complete with GIearth plate electrode 60cm x 60cm x 6 mm buried directly in ground verticvally to depth not less than 2.25 mtr below ground level andwith top edge ofthe plate at a depth not less than 1.5 mtr below ground level, size of dipth 0.90x 0.6 x 2.25 mtr ,earth plate connected to galvanised earthwire of size 4.00 mmdia 7.5 mtr long by means of brazing nuts, bolts, check nuts, & washers,testing of completion (drawn in earth lead protection pipe light gade GI of size 15 mm dia and 20 mm light grade GI pipefor watering) by means brazing at both edges with vertical plane of electrode all as shown in plate No 3 of SSRPart - I connected to earthing lead with Main switch/main control board,filling with charcoal dust and common salt ,including necessary excavation and earth work in any type of soil ,perforated watering pipe,funnel with wire mesh,earth lead protection pipe light grade PCC chamber 1:3:6 type C1 (for even finish on both the faces) and RCC cover 1:2:4 Type B1,450 x450 x50 mm thick with 6 mm dia CTD bars 150 mm c/c with 2 Nos of handles of 10 mm dia steel rod all as specified and directed and testing on completion and connected to equipment with lugs and screw nuts etcincluding taking down old unsv GI earthing all as specified and directed by Engr-in-Charge |
| 127 | Cutting bituminous road/path for passing of elect cable through GI pipes and making good to the cut surfaces by concreating with PCC 1:3:6 to match with the adjescent surfaces complete all as dircted at site. |
| 128 | Supply and laying under roads, under culverts along poles Lightgrade GI pipe of 40 mm bore diacable protection complete all as specified and directed at site. |
| 129 | S &F ceiling fan 1200 mm sweep BEE 5 star rated single phaseAC energy saving with Fan hook,clamp,necessary nuts,bolts,,washer and suitable length mild steel down rod duly making holes etc complete as per manufacture specification. |
| 130 | S&F Heavy duty Exhaust Fan 300mm sweep with louvers and fixing arrangement and making necessary chesses,cutting, holl and making good to the disturbed portion all as specified and directed at site. |
| 131 | S&F Blanking Plates for covering of MCCB DB open space complete all as specified and directed at site. |
| 132 | Supply,laying in trench/on walls with new saddles & clamps etc as per site requirement) ,jointing, testing andcommissioning with new XLPE insulated,armoured,heavy duty,PVC sheathed electric cable with aluminium conductor,1100 volts grade connecting towith new cable aluminium lug andcable glandsof cross sectional area 16 sqmm 4 core including taking down old unsv service cableall as directed. |
| 133 | Supply & fixing in replacement LED street light luminaries of cap 25 watt, SPD -10KV internal with lense, 240 volt, ,pressure dia cast aluminium housing frame,heat resistant toughtened clear glasswith frame complete with accessories , IP 66 protection,pre wired up to a terminal block and mounting attachment,including pvc connector for connection complete all as specified and directed |
| 134 | Supply and fix street light bracket made out of 25 mm bore galvanised iron ,light grade (approx 1.5 mtr in length) including necessary two nos suitable size of clamp with nuts, bolts and washers, etc and two coatsof synthetic enameled paint over a coat of red oxide primer complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
