Military Engineer Services-MES has published Tender For Repair Replacement Of Swts Pipe Line Fire Fighting System, Repair/Replacement Of Control Valve And Other Connected Works Inside Depot Area At Mil Stn Bharatpur.. Submission Date for this Tender is 25-04-2024. Fire Fighting Consumable Tenders in bharatpur Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 13-Apr-2024 | BOQ | BOQ | 25-04-2024 |
| Sl. No. | Item Description |
| 1 | M & L for attending break down of water supply pipe line and repair to CI/DI/GIwater mains of size 80 mm to 150 mm dia at a given notice including necessary excavation in mud, in any type of soil by manual or using special T &P etc.De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars bends/tail peaces etc and making joints complete all as specified and as directed. |
| 2 | M & L for attending break down of water supply pipe line and repair to CI/DI/GIwater mains of size 200 mm to 300 mm dia at a given notice including necessary excavation in mud, in any type of soil by manual or using special T &P etc.De-watering from the trenches by using pump sets, rectification of leakages, fixing of CI specials such as collars bends/tail peaces etc and making joints complete all as specified and as directed. (Note for srl item Nos 1 to 3 :-(a) CI fittings, lead Joints etc shall be measured and paid separetely. (b)The cost of excavation / earth work and repairs to damaged roads, existing structure etc shall be deemed to be included in the quoted unit rate (c)The quoted rated is deemed to be inclusive of transportation and other expenses required for the resource deployment at the complaint site around scattered Military station under AOR of GE Bharatpur. (d) Work will be carried out in any area under juridiction of GE Bharatpur. |
| 3 | Supply and replacement MS clamp /saddle piece made out of MS flat iron suitable to make ferrule and clamping forstopping of leakage branch connections complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe including drilling as per site requirement complete with MS nuts, bolts, washers and rubber packing for complete for following sizes of pipe: |
| 4 | 150 mm bore |
| 5 | 100mm bore. |
| 6 | 80mm bore. |
| 7 | M&L of run lead joint to CI spigot and socketedpipe of bore 80 mm dia complete all as specified and directed |
| 8 | M&L of run lead joint to CI spigot and socketedpipe of bore 100 mm dia complete all as specified and directed |
| 9 | M&L of run lead joint to CI spigot and socketedpipe of bore 150 mm dia complete all as specified and directed |
| 10 | M&L of run lead joint to CI spigot and socketedpipe of bore 250 mm dia complete all as specified and directed |
| 11 | Bends tapers any type, (straight, bend, increasing, decreasing or double socket etc). Tee pieces single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of CI fittings upto 250 bore |
| 12 | Excavation of trenches in any type of soiln.exc 1.5 M wide and n.exc 1.5 M in depth fortaking out / laying of pipe lines and getting out in soft/loose soil forming bottom surfaces to required gradientscomplete all as specified and as directed. |
| 13 | Returning, filling in and including spreading, leveling, watering and well ramming in layersn.exc 25 cm thick complete all as specified anddirected |
| 14 | Removing excavated surplus materials toa distance not exceeding50 Mtrs and depositedwhere directed at a level not exceeding 1.5 Mtr above starting point complete all as specified anddirected. |
| 15 | Taking up or down G.I. tubing and connectionand stacking neatly for reuse andremoving the balance material from site of size 25mm bore complete all as specified and directed. |
| 16 | Taking up or down G.I. tubing and connectionand stacking neatly for reuse andremoving the balance material from site of size 40mm bore complete all as specified and directed. |
| 17 | Taking up or down G.I. tubing and connectionand stacking neatly for reuse andremoving the balance material from site of size 50mm bore complete all as specified and directed. |
| 18 | Taking up or down G.I. tubing and connectionand stacking neatly for reuse andremoving the balance material from site of size 80mm bore complete all as specified and directed. |
| 19 | S&F GI tubing medium grade ISI markedincluding all fittings laid in trenches / fixed on wallof size 25 mm bore all as specified and directed. |
| 20 | S&F GI tubing medium grade ISI markedincluding all fittings laid in trenches / fixed on wallof size 40 mm bore all as specified and directed. |
| 21 | S&F GI tubing medium grade ISI markedincluding all fittings laid in trenches / fixed on wallof size 50 mm bore all as specified and directed. |
| 22 | S&F GI tubing medium grade ISI markedincluding all fittings laid in trenches / fixed on wallof size 80 mm bore all as specified and directed. |
| 23 | M&L in repairs gun metal gate or globe valveswith iron wheel head (ISI Marked), screwed bothends for iron pipe and fixed of size 25 mm bore |
| 24 | M&L in repairs gun metal gate or globe valveswith iron wheel head (ISI Marked), screwed bothends for iron pipe and fixed of size 40 mm bore |
| 25 | M&L in repairs gun metal gate or globe valveswith iron wheel head (ISI Marked), screwed bothends for iron pipe and fixed of size 50 mm bore |
| 26 | Taking out the unseviseable CI pipe lines including all fittings with spigot and socket ends and lead joints including burning out joints and recovering lead and cleaning the pipes internal/external for reuse the following bore of pipes:- |
| 27 | 100 mm bore |
| 28 | 150 mm bore |
| 29 | 250 mm bore |
| 30 | Refixing and laying only cast iron pipe with spigot end socketed any class in available length complete in trenches all as specified and directed for the following bore of pipe:- |
| 31 | 100 mm bore |
| 32 | 150 mm bore |
| 33 | 250 mm bore |
| 34 | Supply, laying in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 standard length of K-7 specification with outside zinc coating complete including necessaary rubber gasket joints complete of the following sizes : Note :-(i) Excavation and earth work will be measured and paid separately. (ii) Rubber gasket joints shall be deemed to be included in quoted rate. |
| 35 | 100 mm bore |
| 36 | 150 mm bore |
| 37 | 250 mm bore |
| 38 | construction of brick masonry vavle pit of internal dimension 90cmx90cmx90cm depth with sub class "B" bricks in cm (1:4) and 10 mm thick plastering in CM(1:4),PCC (1:4:8) type D2 (Using 40mm grade broken stone aggregate) as in foundation lean concrete PCC (1:3:6) type CI (Using 20mm grade broken stone aggregate ) as in bedding and copping MS frame with 40x40x6mm angle iron 3 mm thick MS sheet cover plate with locking arrangement, hinges and twocoats of sythetic enamel paint over one coat of red oxide primer including preparation of surface three coats of white wash on plaster surface (exposed to view) including necessary excavation in soft loose soil returning filling in and removal of surplus soil to a distance not exceeding 50mm complete allas specified and directed. |
| 39 | S&F in replacement of sluice valve 80 mm boreclass PN-Iwith flanged and iron wheel head, shut and open directed cast on it andincluding jointing materials, rubber gasket suitablesize nut bolts and washer etc completeall asspecified and directed. |
| 40 | S&F in replacement of sluice valve 50 mm boreclass PN-I.6with flanged and iron wheel head, shut and open directed cast on it andincluding jointing materials, rubber gasket suitablesize nut bolts and washer etc completeall asspecified and directed. |
| 41 | S&F in replacement of sluice valve 100 mm boreclass PN-I.6with flanged and iron wheel head, shut and open directed cast on it andincluding jointing materials, rubber gasket suitablesize nut bolts and washer etc completeall asspecified and directed. |
| 42 | S&F in replacement of sluice valve 150 mm boreclass PN-I.6with flanged and iron wheel head, shut and open directed cast on it andincluding jointing materials, rubber gasket suitablesize nut bolts and washer etc completeall asspecified and directed. |
| 43 | S&F in replacement of sluice valve 200 mm boreclass PN-I.6with flanged and iron wheel head, shut and open directed cast on it andincluding jointing materials, rubber gasket suitablesize nut bolts and washer etc completeall asspecified and directed. |
| 44 | S&F in replacement of sluice valve 250 mm boreclass PN-I.6with flanged and iron wheel head, shut and open directed cast on it andincluding jointing materials, rubber gasket suitablesize nut bolts and washer etc completeall asspecified and directed. |
| 45 | supply and fixing in replacement of non return valve/ Air Release Valve, flanged ends PN I ISI Marked of 100 mm bore complete all as specified and directed. |
| 46 | supply and fixing in replacement of non return valve/ Air Release Valve, flanged ends PN I ISI Marked of 150 mm bore complete all as specified and directed. |
| 47 | Taking down/ attending water sample in suitable bottle for testing of bio and chemical each test Ph, Tutbidity, Total dissolved soilds, Aluminium, calcium, chloride, Flouride, all specification as per IS 105009(2012) for the following locations. |
| 48 | Semi underground sump 100000 Glns capacity at Mallah pump house |
| 49 | Overhead reservoir of 50000 Glns capacity at sewar Fort |
| 50 | Semi underground sump 50000 Glns capacity at KLP Area |
| 51 | Perimeter area Tube Well No 07 |
| 52 | Semi underground sump 100000 Glns capacity at Madoni hills |
| 53 | Overhead reservoir of 75000 Glns capacity at kanjoli line |
| 54 | Dismantling of sluice valve of size 250 mm dia from existing pipe line and remove the spindle and inner gate and replace with new stainless steel spindle and require lathe work for inner gate at work shop and re- assembling the valve on its original position and testing complete all as specified and directed. |
| 55 | Dismantling of sluice valve of size 150 mm dia from existing pipe line and remove the spindle and inner gate and replace with new stainless steel spindle and require lathe work for inner gate at work shop and re- assembling the valve on its original position and testing complete all as specified and directed. |
| 56 | Dismantling of sluice valve of size 100 mm dia from existing pipe line and remove the spindle and inner gate and replace with new stainless steel spindle and require lathe work for inner gate at work shop and re- assembling the valve on its original position and testing complete all as specified and directed. |
| 57 | Cutting and repair of existing road/PCC path for laying of pipe line complete all as specified and directed |
| 58 | supply and fixing 1x 9 watt square shaped Integral decorative LED (Warm white) Bollard ploycarbanate diffuser and IP 65 protection and mounting of fitting with PCC foundation all as directed Make :- Havells/ Bajaj or Equivelents |
| 59 | Supply and fixing 45 Watt (Warm white) LED Post of with high aesthetics and premium looks provided with die cast aluminum housing and polycarbanate opal diffuser and IP protection all as directed Make: Bajaj Cat Part No - BGCP45WLED WW |
| 60 | M&L submain wiring complete with 2X 4 Sqmm single core multi stranded PVC insulated and sheathed cable FRLS copper conductorand one run of 4 Sqmm copper cable for earth continuity conductorand including 25mm bore rigid PVC conduit with all PVC accessories fixed on concealed surface complete. |
| 61 | M&L of PCC 1:2:4 type C-2, 20 mm graded aggregate filling and mass concrete, road finishing, trust/protection blocks for pipe lines/ installation damaged PCC paths concrete all as specified and directed |
| 62 | M&L for carried out checking of control panel wiring of firefighting sytem with all controls inluding replacement of all pressure switches (03 Nos) and wiring as per existing design etc for controlling of pressure of pipe line by jockey pump, electric/ diesal operated fire fighting pumps etc complete The following will carried out are as under : a) The jockey pump start when pressure gone to maintain below 2.50 Kg/Cm2 in line. b) When pressure below 2.50 Kg/Cm2 than the centrifugal pump start to maintain the pressure in pipe line. c) If the electric supply is not avail the command goes to Diesel engine pump to maintain required pressure in pipe line. d) Replace the pressure switchs as per existing model - 03 Nos e) replace all internal wiring with 4 Sqmm as required length/ core with required copper lugs, etc f) repalce the contractor 6 as per existing model - 02 Nos |
| 63 | M & L for disconnecting and removing the defective centrifugal pump of 100 HP capacity of any make from the installed position by putting dummy plate to suction and delivery line,opening the pump, renewal the worn out parts, and dismantling of impeller and metal filling on pitted cavity and balancing the impeller,plolishing the shaft, distance piece,replacing shaft sleeves,wear rings,bearing, check nut & studs,gland resizing, key way, key, lantern ring, bearing housing and balancing the shaft assembly,assembling the pump with new gasket & gland packing and greasing complete all as directed. |
| 64 | Taking down old rusted hydrant valve and Supply & fixing landing valve hydrant type A confirming to IS 5290 with 63 mm dia gun metal instantanous type single headed outlet complete with all accessories for connecting hose pipe complete all as specified and directed. |
| 65 | Supply and fixing in replacement of weather proof standard fire hose box made of 18 gauge MS Sheet 800mm X 600mm X 250mm with double door with 4 mm thick glasses and door frame made of 16 gauge MS sheet painted fire red out side and brilliant white inside yard |
| 66 | Material & labour of CP hose cotton breaded of size 15 mtr long of dia 63mm including couplings at both ends to fix at one to hydrant valve 63 mm and other end fix in nozzle complete all as specified and directed |
| 67 | Material & labour of Branch pipe gun metal 63 mm instantaneous inlet, made threaded outlet, 15mm bore nozzle long complete all as specified and directed |
| 68 | M&L for carrying out Servicing of Diesel engine driven split case multistage pump set of capacity 92to 100 KW installed at fire fighting location. (a)Replacement of Oil filter element -01 Set (b)Replacement of fuel filter element -01 Set (c)Air filter element- 01 No. (d)Replacement of complete V-belt ( set of three) as per sample -01 set (e)Replacement of complete rubber hose connectors of Turbo charger Line -01 Set (f)Replacement of fuel pipe as per sample set of 06 nos-01Set (g)Replacement of oil pipe set as per sample-01Set(h) Replacement of Oil Complete - 01 Job(j) Replacement of coolant Complete -01 Job (k) Servicing of self starter & charging alternator including replacement of worn out bushing, bearing & carbon brushes. (l) Cleaning of fuel tank and complete painting of tank and DG set with pump. |
| 69 | Dismantling the defective squrrel cage induction motor from bed,disconnecting control wirings and earth wiring,dismanlting the couplings,transporting from pump houses to civil work shop for following replacement/ repairs works, removing of bearings, replacingthe unserviceable worn out bearing with new bearings suitable for driven end and non-driven end including cleaningthe winding, improve the insulation to required IR value,inspecting the core of stator,rotor,dynamic balancing & balance tesing of rotor,inspecting of cooling fan etc,replacing worn/rested nut, bolt,washer and re-assembling the motor,transporting to civil work shop to pumphouse, connectingwith necessary electrical connections,fixing & aligning motor with pump including testing and commissioning of 100 HP Capacity complete all as specified and directed. Note : The cost of the items replaced will be paid separately under respective items of Sch "A" |
| 70 | Rewinding complete with appropriate guage of supper enamelled copper wire as per existing guage and turns with insulating materials of best quality including varnishing (insulation) ovening and all as directed. |
| 71 | Replacement of existing u/s ball bearing of suitable size - 02Nos. |
| 72 | M&L for replacement of existing u/s pump coupling MS with rubber inserssion bronze bush with nuts and bolts complete alongwith making required allingement for smooth running (without vibration) of pump motor all as specified and directed. |
| 73 | M&L for replacement of existing u/sfan blade all as directed |
| 74 | M&L for replacement of existing u/s fan casing |
| 75 | M&L for replacement of existing u/s connection plate incl copper terminals nuts, washers, cable lugs and connection plate and screws all as directed. |
| 76 | Supplying and laying synthetic Rubber mats for electrical installation purposesuitable for electrical shock safety of sizes 2m x 1m x 12mm chequre type black complete . |
| 77 | Supply and fixing of Lithium base Energy efficient integrated Solar street light of 32 watt insingle FRP bodyduly polyurethane coating (Camouflage color), encases with monocrystalline solar PV panel of 65-67Wp,lithium battery 11.1/12.8V,33.0 AH with inbuilt BMS,IP 65, High brightness W-LED(160-180lm/watt) lamp with Aluminium reflector for better light distribution ,CRI>70, color temp 5700K-6500K Microcontroller based charge controller cum driver,automaticdimming function(First 04 hrs at fullbrightness& rest of the time at lower light level with PIR motion sensor), Dusk to dawn operation,suitable to working temp (-) 10C to (+) 55C ,weight not more thatn 16-18 Kg with adjustableMS clamp suitablefor pole/wall mounting etc complete as required including taking out old unserviceable street / wall light fittings .Make: AXXON/HAVELLS/PHILLIPS Protections: Short circuit, overload,Reserve polarity and battery protection.Firm should provide vital parametres Test report from NABL accredited lab and should be of made in India with CE & ROHS complaint. (Excavation & earth work shall be measured separately) |
| 78 | S&F in repairs fully automatic star Delta starters in sheet metal enclouser suitable for 15 HP capacity, 415V, 50Hz, all Complete all as specified and directed Make : L&T/BCH/Siemens |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
