Military Engineer Services-MES has published Tender For Provision Of Toilet Block At 3 Up Air Ncc And Improvement Of Ttcle Storage Site With False Ceiling At Afs Chakeri Kanpur. Submission Date for this Tender is 30-04-2024. False Celing Tenders in chakeri Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 23-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 30-04-2024 |
| Sl. No. | Item Description |
| 1 | Excavating in trenches n exc 1.5 m wide and n exc 1.5 m in depth for foundation, sewage line, manholes n exc 10 sqm on plan and n exc 1.5 m depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling, mass concrete complete all as specified and directed. |
| 3 | M&L Brick work with fly ashbricks, straight or curvedon plan exc 6m meanradius, built in CM 1:6 complete all as specified and directed. |
| 4 | M&L Damp proof course 40 mm thick PCC 1:2:4 type B-0 to horizontal or vertical surface including necessary form work complete all as specified and as directed. Note :WPC shall be measured and paid separetely under respective items. |
| 5 | M&L for PCC (1:2:4) Type B-0 using 12.50 mm graded stone aggregate as in coping on brick/concrete wall complete all specified and directed. |
| 6 | M & L for Formwork to sides and soffits of floor or roof beam, beam hauchings, griders, bressum-mers, lintles, cantilevers shelves including supports overhangs, etc. also splays between floors and beams, etc for rough finished complete all as specified and directed. |
| 7 | M&L for RCCType A-1(1:1.5:3) Nominal Mix using 20mm graded stone aggregate Beams, cantilevers, bressummers, lintels over1.5m span complete all as specified and directed. |
| 8 | Formwork to soffits of suspended slabs (rough finished surfaces) such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed. |
| 9 | M&L for RCCType A-1(1:1.5:3) Nominal Mix using 20mm graded stoneSlabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the lik complete all as specified and directed. |
| 10 | M&L for TMT bar 5 mm dia and over upto and including 10 mm diaas in stirrups, spacer and binders complete all as specified and directed. |
| 11 | M&L for TMT bar 10 mm dia and over cut to length, benet to shape required including cranking bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia as in reinforecement complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick on fair facesofbrick or stone masonry of wallin CM (1:6) finishedeven and smooth without using extra cement complete all as specified and as directed. |
| 13 | Supply only integral water proofing compound conforming to IS-2645-2003 complete all as specified and directed. |
| 14 | M&L for preparation over a coat of primer of surfaces and applying two coats of cement based paint over a coat of primer on walls , all as specified and directed. |
| 15 | M&L for rendering 10 mm thick on fair faces of brick or stone masonry in ceiling in CM (1:3) finish even and smooth without using extra cement complete all as specified and directed. |
| 16 | M&L three coats of white wash on new plastered brick/concrete surfaces of ceiling including preparation etc complete all as specified and directed. |
| 17 | M&Lfor hard core of guage n exc. 63mm, broken stone, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 18 | M&L 75 mm thick cement concrete 1:4:8 type D-2 (40 mm garded aggrgate) as in sub base of floor complete all as specified and as directed. |
| 19 | M&L 25 mm thick PCC 1:2:4, type B-1 (using 12.50 mm graded stone aggregate), as in floor complete all as specified and as directed. |
| 20 | M & L for Non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18Sqm(Ist quality ) conforming to IS-13755, as in floor set and jointed in neat cement slurry and pointed in coloured cement to match the surface over and including 15 mm thickscreed bed in CM 1:6 complete all as specified and directed. |
| 21 | M&L for glazed ceremic colouredtiles 300 x 200x 7 mm thick (Ist quality) conforming to IS-13753, as in vertical surface such as skirting/dado set and joined in neat cement slurry and pointed in coloured cement to match the surfaceover and including 10 mm thick rendering in CM 1:4, complete all as specified and as directed. |
| 22 | M&L 75 mm thickPCC 1:3:6 type C-1 (using 40 mm graded stone aggregate) as in plinth protection & finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 23 | S&F mild steel confirming to Fe-410 (Gde- E-250), as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. complete all as specified and directed. |
| 24 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa Az-150 as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 25 | S & F for 12mm thick perforated false ceiling at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 X 595 mm of approval texture design and patterns having moisture content less than 2 %, humidity resistance of 99 %, NRC 0.50 to 0.75 as per IS 8225 : 1987, Noncombustible as per BS 476 (Part-4)- 1970 and light reflectance of 85 % (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 1200mm and secondary intermediate cross -T of size 15 x 32 mm of length 600 x600 mm, suspended from ceiling using galvanised mild steel items (galvanised @ 80 grams per Sqm), 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x25x2 mm galvanised iron perimeter of size 24 x 24 x 0.40 mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws complete all as specified and directed. |
| 26 | M&L for PVC (SWR) floor trap withgrating including jointing to waste pipe fixed with solvent cement.Diameter of outlet in 75 mm) complete all as specified and directed. |
| 27 | S & F vitreous chinaurinal half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including60mm long brass screws pointing around urinal back in cement complete all as specified and directed. |
| 28 | S&F urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 29 | S&F vitreous china Squatting Pan "Orrisa" pattern 580x440mm size pan white with front or back inlet with integral "foot rest, incl PVC (SWR) "P" or "S" trap 110mm dia & provn of lime concrete bedding complete all as specified and directed. |
| 30 | S&F 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including Flush pipe of polyetylene of low or high density or PVC. 32mm dia, for low level cisterns brackets etc complete all as specified and directed. |
| 31 | S&FPVC connections 15mm size with PTMT nuts of length 450mm long complete all as specified and directed. |
| 32 | S&F bib taps cast copper alloys with crutch or butterfly handle chromium plated fancy type, screwed down screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 33 | S&F chromium plated angle valve suitable for 15mm bore GI tubing complete all as specified and directed. |
| 34 | S&F Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets etc including 32mm dia waste coupling complete all as specified and as directed. |
| 35 | S & F pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for union pipe and fixed to 15mm dia pipe complete all as specified and directed. |
| 36 | M&LBottle trap 40mm dia bore of PTMT having minimum water seal of 25mm .(Minimum weight 40mm-270 gms) complete all as specified and directed. |
| 37 | S&F 650x450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. complete all as specified and directed. |
| 38 | S&F 15mm bore galvanized iron tubes medium grade with all fitting and fixed complete to walls, ceiling or laid in floor complete all as specified and directed. |
| 39 | All as per item No. 38 above but 20mm dia bore complete all as specified and directed. |
| 40 | S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 41 | S&F of factory made solid PVCdoor frame (chowkhat) of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced withM.S. squre tube, S&F in opening complete all as specified and directed. |
| 42 | S&F of factory made solid PVC moulded door shutter 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the font face on back face S&F in frame as per specification and drawing. |
| 43 | S&F 75mm size, mild steel butt hinges, medium weight cold rolled complete all as specified and as directed. |
| 44 | S&F aluminium anodised, barrel tower bolt of extruded sectionsize 150 mm long complete all as specified and as directed. |
| 45 | S&F aluminium handle cast type anodised, size 100mm long complete all as specified and as directed. |
| 46 | S&F 500 Ltrcapacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specifiedall as specified and as directed. |
| 47 | S&F Ball brass 20mm bore valve, high pressure, with polythelene float & flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 48 | S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed. |
| 49 | All as per item No. 48 here-in-before but 110mm dia bore complete all as specified and directed. |
| 50 | Returning filling in including spreeding, leveling, watering and well ramming in layers n. exc 25 cm thick in soft /loose soil complete all as specified and directed. |
| 51 | Removal of excavated soil not exc 50m and depositing where directed at a level n.exc 1.5m above the starting point all as directed. |
| 52 | Excavation over areasn exc 1.5m deep and getting out in soft/loose soil complete all as specified and directed. |
| 53 | Excavation over area exceeding 1.50 Mtr but not excavation not exceeding 3.00 Mtr complete all as specified and directed. |
| 54 | M&L PCC 1:4:8 type D-2 (using 40 mm graded stone agg) as in foundation of man holes complete all as specified & directed. |
| 55 | M&L brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed. |
| 56 | M & L rendering 15mm thick on brick wall or concrete surface consisting two layers of 5mm thick in cement mortar 1:4 over 10mm thick in CM (1:6) mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed. (Note:- Water proofing compound shall be measured and paid saparately.) |
| 57 | Supply only water proofing compound complete all as specified and directed. |
| 58 | M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in bed to drain pipes of 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 59 | M&L for Reinforced cement concrete pipes of dia 200 mmclass NP3, laid and jointed complete with collars complete all as specified and directed. |
| 60 | M&L precast RCC 1:2:4 type B1 (Nominal Mix) as in landings, cover slab,chajjas etc.and similar articles with plain faces set in CM 1:6 complete all as specified and directed. |
| 61 | S&F cast iron soil, sand cast pipes of 100 mm dia waste and vent pipes in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed. |
| 62 | S&F CI vent cowl 100 mm complete all as specified and directed. |
| 63 | Demolition of stone slaband tiles of any description or thickness bedded in cement mortarinfloors, aprons etc complete all as specified and directed. |
| 64 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 65 | Excavating in post holes in soft soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm |
| 66 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.11611979 grade St.-240 complete all as specified and directed. |
| 67 | Fixing only Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengthsi.e. within 20mm of the length indicated grade Fe-410 complete all as specified and directed |
| 68 | M&L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.. |
| 69 | M&L Cement concrete in foundations, filling and mass concrete type B-1 (1:2:4) using 20 mm graded stone agregate complete all as specified and directed |
| 70 | Dismantling structuralsteel workincluding doors, gates but excluding framed truss etc complete all as specified and directed |
| 71 | Supply & laying of XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade 400 sqmm, 3.5 corelaid in trenches/panel or passing through pipe including connecting with suitable lugs, nuts and bolts and testing complete all as specified and directed |
| 72 | Supply & laying of XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade 240 sqmm, 3.5 corelaid in trenches/panel or passing through pipe including connecting with suitable lugs, nuts and bolts and testing complete all as specified and directed |
| 73 | Supply and filling fine sand ( or stone dust ) to the full width of trenches for protection of cables including spreading and punning down complete of all as specified. Note : Thickness of sand/stone dust shall be measuredafter punning. |
| 74 | M&L laying well burnt old sizebricks, sub class "B" bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection complete all as specified & directed. |
| 75 | Supply and fixing of GI pipe light grade of size 40 mm bore for laying in trenches/floors for protection of LT cable, complete all as specified and directed. |
| 76 | Supply and Fix ON Load Change over switch having capacity 630 Amp, 4 pole, 415 Volts with suitable enclosure made out of 3.15mm thick, CRCA sheet totally enclosed, weather, dust & vermin proof, epoxy powder coated over a coat of zinc chrome primer, factory made, weather proof,having locking arrangement of suitable size to accommodate all accessories with support of angle iron of size 50 x 50 x 6mm to cover all corner and standing legs of angle iron complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
