Mishra Dhatu Nigam Limited has published Providing And Laying Chain Link Fencing, Barbed Wire Laying At Township And Construction Of Shed For Cisf Quarter Guard At. Submission Date for this Tender is 22-04-2024. Shed Construction Tenders in hyderabad Telangana. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | BOQ for Mod-I :Providing & laying of chain link fencing for D-1 Quarter and Barbed wire laying for quarter no D-4,D-5 & D-6 at Midhani Township |
2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. (For all kinds of soils) leveling the soil surface as per instructions of Engineer - in - charge. |
3 | Providing and laying in position cement concrete of specified grade M15 excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) top surface finish with power trowel machine. |
4 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete |
5 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm |
6 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used.With G.I. barbed wire |
7 | Supply of Labours |
8 | (a) Skilled |
9 | (b) Un-Skilled |
10 | Module-II: BOQ for Construction of Shed for CISF quarter guard at Ty.sheds |
11 | Demolishing RCC work by manually/ mechanical means including cutting reinforcement bars manually/by mechanical means in RCC works, stacking of steel bars and disposal of unserviceable concrete at a place directed by Engineer- in- Charge. |
12 | Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation / trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
13 | Providing and laying in position cement concrete of specified grade 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 20 mm nominal size derived from natural sources) |
14 | Supply & fixing of structural steel - M.S Steel Insert plates, Angles, including caps, bases, splices etc. built-up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, kerb angles, channels and beams, etc at all levels as per drawing. The cost of providing gas cutting including gas bottles, welding machines, welding rods , all tools required etc is in the scope of contractor. The cost also includes the cost of one coat of redoxide primer & two coats of synthetic enamel paint complete. All tools , tackels,scaffolding etc are to be arranged by contractor. |
15 | Providing and fixing colour coated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail