Military Engineer Services-MES has published Tender For Welcome Maintenance , Day To Day Maint & Repair To Joinery, Plumbing, Sanitary, Roof, Plastering, Certain E / M Works And Other Connected Bldg Repair Work In Md Offers Accommodation And Other Areas Of Age B / R-Ii Under Ge ( North ) Amb. Submission Date for this Tender is 13-05-2024. Shed Construction Tenders in ambala Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 25-Apr-2024 | Amendments to Date | Date | 13-05-2024 |
| FileName | File Description | File Size |
| 980fd3cc-27dd-4c33-b99e-c38c50d1216a.html | Tender Notice | 0 KB |
| BOQ_726002.xls | Tender Document | 0 KB |
| Tenderdocument.pdf | Tender Document | 0 KB |
| Tendernotice_1.pdf | Tender Document | 0 KB |
| Sl. No. | Item Description |
| 1 | Schedule "A" Part-I (B/R itmes) Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | Material and labour rendering 15 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:4 andfinishedeven and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Material and labour rendering 10 mm thick on any faces of brick work or concrete wall surfaces in cement mortar 1:6 andfinishedeven and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | M&L rendering 05 mm thick on any faces of brick work or concrete ceiling surfaces in cement mortar 1:3 andfinishedeven and smooth without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 5 | M&L rough cast plaster 15 mm thickin cement motar 1 :4 complete as specified in SSR Part-I, clause 14.22 shall consisting of following:- firstly apply under coat in cement mortar 1:4 not less than 10 mm thick and while still it is in plastic state the rough cast mixture consisting of crushed stone or fine gravel agg. which is generally of size between 6 to 12 mm depending on texture required mixed with coarse sand and cement in the ratio 1:1:1 shall be applied, complete all as specified and as directed by the Engineer-in-Charge. |
| 6 | M&Lpreparation of newly plastered surfaces of wall and applying two coats of cement based paint complete all as specified and as directed by the Engineer-in-Charge. |
| 7 | M&L preparation of newly plastered/ unplastered surfaces of walls and applying two coats of oil bound distemperwith painting roller over a coat of alkali resistant primercomplete all as specified and as directed by the Engineer-in-Charge. |
| 8 | M&L preparation of newly plastered/ unplastered surfaces of brick/concrete ceiling and applying three coats of white lime wash complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | M&L preparation of old decorated brick/concrete, plastered / un plastered surfaces of wallsby brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white lime wash complete all as specified and as directed by the Engineer-in-Charge. |
| 10 | M&L preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the walls, pillars, cornices etc.complete all as specified and as directed by the Engineer-in-Charge. |
| 11 | M&L preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper with paintingrolleron walls, pillars, cornices etc.complete all as specified and as directed by the Engineer-in-Charge. |
| 12 | M&L preparation of old decorated brick/concrete, plastered / un plastered surfaces of ceilingby brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white lime wash on ceiling surfaces.complete all as specified and as directed by the Engineer-in-Charge. |
| 13 | M&Lpreparation of old decorated woodensurfacesof any description, not otherwise described, over10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed by the Engineer-in-Charge. |
| 14 | M&Lpreparation of old decorated steelsurfacesof any description, not otherwise described, over10 cm width or girth and applying one coat of synthetic enamel paintcomplete all as specified and as directed by the Engineer-in-Charge. |
| 15 | M & L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of cement base paint complete all as specified and as directed by the Engineer-in-Charge. |
| 16 | M & L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of oil bound distemperwith painting roller over a coat of alkali resistant primer complete all as specified and as directed by the Engineer-in-Charge. |
| 17 | M & L complete removal of existing treatment on ceiling surfaces (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of white lime wash complete all as specified and as directed by the Engineer-in-Charge. |
| 18 | M&L preparation of new/old plastered surfaces of wall andapplying2 to3mm thick wall care putty white cement based in two or more coats to achive smooth surface complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | M & L complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, wasing down with water to remove loose particles etc and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqmover and including priming coat of exterior primer applied @ 0.90 litre per 10 Sqmcomplete all as specified and as directed by the Engineer-in-Charge. |
| 20 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches,pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and as directed by the Engr-in-charge. |
| 21 | M&L for brick work with sub class "B" old size bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 22 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge. |
| 23 | M&LNon-skid ceramic coloured tiles joint free premium/1st quality(square/rectengular) 7 to 8 mm thick, area of each tile exc 0.11 sqm but not exc 0.18 sqm as in floor, set and jointed in neat cement slurry and pointed in colouredcement to match the surface over and including screed bed 15 mm thick in cement mortar 1:6complete all as specified and as directed by the Engineer-in-Charge. |
| 24 | Material and labour glazed ceramic coloured tiles joint free 1st quality in vertical surfaces/ skirtings/dados of size 450x300x7mm thick/300 x 600 x 7 mm thickor nearest size as required , set and jointed in neat cement slurry and pointed in white or colouredcement mixed with pigmentto match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4complete all as specified and as directed by the Engineer-in-Charge. |
| 25 | Material and labour vitrified ceramic light shade tilespremium/1st quality 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm and notexceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick cement screed bed in CM 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | Material and labour vitrified ceramic light shade tilespremium/1st quality 10mm thick of same description as of floor tiles in serial item No.25 abovebut 100mmto 200mm height as in skirting, set and jointed in neat cement slurry and pointed in white or colouredcement mixed with pigmentto match over and including 10mm thick rendering on fair faces of brick / concrete surfaces in cement mortar 1:4complete all as specified and as directed by the Engineer-in-Charge. |
| 27 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n exe 15 cm thickness (below or above ground level) complete all as specified and as directed by the Engineer-in-Charge. |
| 28 | M & L75 mm thick PCC 1:4:8 Type D-2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement complete all as specified and as directed by the Engineer-in-Charge. |
| 29 | M & L25 mm thick PCC 1:2:4, type B0 as insub base floor (using 12.50mm gradedcrushed stone aggregate), finished even & fair without using extra cement complete all as specified and as directed by the Engr-in-charge. |
| 30 | M & L providing 75 mm thick cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in plinth protection/hardstanding laid in alternatebays (not exc 2 Sqm each )and finished even and smooth without using extra cement and providing jointsthroughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight including form work complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | Material and labour for 16 to 18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick rendering in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge. |
| 32 | M &L 10mm thick coloured paver heavy duty tilesof size 300 x 300mm in floors etc set and jointed in neat cment slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1 :4 ,complete all as specified and as directed by the Engineer-in-Charge. |
| 33 | M & L galvanised iron tubing 20 mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floorsas in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 34 | M & L galvanised iron tubing 15mm bore medium grade with all fittings and fixed complete to walls and ceilings or laid in floorsas in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 35 | S & F 15mm bore cast copper alloy fancy type chromium plated stop valves with long shank and cup (concealed type), screwed down, high pressure with capstan head, scrwed both ends for iron pipe or for unions as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 36 | S & F15mm bore cast copper alloy chromium plated angular stop valveswith capstan head, screwed down, high pressure scrwed both ends for iron pipe or for unions as in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 37 | S & Ffancy type pillar tap of 15mm bore, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 38 | S&F bib taps 15mm bore fancy type brass chromium plated with long body,wall flanges and capstan head,screwed down,screwed for iron pipe or for brass ferrule and fixed as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 39 | S & F CP brass wall mixture 3-in-1 system with provision foroverhead shower complete with 115 mm long bend pipe , connecting legs & wall flange with overhead showeras in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 40 | S&F asin repair brass chromium palted WHB/sink mixer swan neckfor mixing hot & cold water for 15mm borepipes including all connecting fittings, screweddown for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge. |
| 41 | S & FPVC connections 15 mm sizewith PTMT nuts of length 450 mmas in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | S & Fvitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing ofwaste fitting etc as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 43 | S & Fvitreous chinatable top wash hand basin white,of size 565mmx420mmx140mm fixed on and including cast iron cantilever bracket,32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing ofwaste fitting etc as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | S&F PVC cabinet type looking mirror size 450 mm x 600 mm box typeincluding all necessary items as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 45 | S&F as in repair brass chromium plated shower rose 100mm dia swivel type with arm of standard size as per site complete all as specified and as direced by the Engineer-in-charge. |
| 46 | Supply and fixing vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device and complete accessories as in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 47 | S & Fsingle piece water closet wtih PP soft close seat cover, hinges, fixing accessories and accessories set, cistern fittings, S or P Trap complete fixed as in repair complete all as specified and as directed by the Engineer-in-Charge. Make : Jaquar Cat Part No SLS -WHT-6855S /CERA Cat part No.S10131095 /Hindware Cat Part No.20085 (S-30) |
| 48 | S&F as in repairheatlh faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in positioncomplete all as specified and as directed by the Engineer-in-Charge. |
| 49 | S & F10 ltr PVC valveless syphonic action type flushing cistern with brackets, flush pipe etc complete including inlet ball valve float and handle including brackets, of approved make including all connections & flush pipes for WC as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 50 | Supply and fixing as in repairgrating doom100mm dia ofstainless steel with or without waste holecomplete all as specified and directed by Engineer-in-Charge. |
| 51 | S & Fsinks with drainage board made out of stainless steel 1mm thick sheet for kitchenwith plugs, PVC corrugatedwaste pipe, brass chromium plated coupling including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mmwith bowl size 410mm x 330mm x 160mm as in repaircomplete all as specified and as directed by the Engineer-in-Charge |
| 52 | S&F kitchen plate rack of stainless steel sheet 1mm thickness size750mm x 900mm x250mm and having weight not less than 8.00 Kg each as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 53 | S & F corner Glass shelf 300 mm(with brassbracket)including fixing with brass screwsto wall complete fixed as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 54 | Supply & fixingas in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide and 60cm long with chromium plated guard and railing , complete all as specified and as directed by the Engineer-in-Charge. |
| 55 | S & F soap dish, brass chromium plated, approximate size 160x160x90mm, fixed to plugs with chromium plated brass screws as in repair complete all as specified and as directed by the Engineer-in-Charge |
| 56 | S&F brass chromium plated toilet paper holder complete fixed to wall as in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 57 | S & F stainless steel fancy type peg setof 05 (05 Nos of hook in each) including fixing with steel screw and PVC rawel plugcomplete all as specified and as directed by the Engineer-in-Charge. |
| 58 | Supply and fixing plastic water closet seat cover, white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device as in repair complete all as specified and as directed by the Engineer–in–Charge. |
| 59 | S & F stainless steel towel rack of size600 mm x 250mm with lower hanger including brackets,fixed as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 60 | S & F as in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. |
| 61 | S&F as in repair stainless steel tumbler holder and fixing with stainless screws to wall complete all as specified and as directed by the Engineer–in–Charge. |
| 62 | S & F 15 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for ironpipe as in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 63 | S & F 20 mm bore Gun-metal, globe or gate valves with iron wheel head, screwed both ends for ironpipe as in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 64 | Supply and fixing as in repairwater storage tank, 500 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20mm dia high pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore,complete all as specified and as directed by the Engineer-in-Charge. |
| 65 | Supply and fixing as in repairwater storage tank, 1000 ltr capacity, HDPE triple layer, white colour, conforming to IS, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm diahigh pressure with polythene float and flynut, screwed and suitable for iron pipe 20 mm bore, complete all as specified and as directed by the Engineer-in-Charge.. |
| 66 | M & L 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 67 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified & directed by the Engr-in-Charge. |
| 68 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or fixed to walls complete all as specified and as directed by the Engineer-in-Charge |
| 69 | S&FPVC(SWR)bends of any radius, for 110mm bore pipes, with access doors, complete all as specified and as directed by the Engineer-in-Charge. |
| 70 | S&F 110mm bore PVC (SWR) juction single (Single T) equal are unequal with acces doorcomplete all as specified and as directed by the Engineer-in-Charge. |
| 71 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors or fixed to wallscomplete all as specified and as directed by the Engineer-in-Charge |
| 72 | S&FPVC(SWR)bends of any radius, for 75mm bore pipes, with access doors, complete all as specified and as directed by the Engineer-in-Charge. |
| 73 | S&F 75mm bore PVC (SWR) juction single (Single T) equal are unequal with acces doorcomplete all as specified and as directed by the Engineer-in-Charge. |
| 74 | Taking down chowkats or frames areanot exceeding 1.50 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr-in-charge. |
| 75 | Taking down chowkats or frames area exceeding 1.50 Square meter andnot exceeding 4.00 Square meter (without taking off shutters from the frames) and removing from site, including cutting holes for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces to match with existing finish complete all as specified and as directed by the Engr-in-charge. |
| 76 | Taking down shutters of any description area exc 1 sqm and not exc 2 sqm each and removing the same from site complete all as specified and as directed by the Engineer-in-Charge. |
| 77 | M&L for rolled mild steel framed work as in chowkats ofdoor or gates of angle or other section with gusset plates, rails braces etc. complete. drilled for fixing for steel sheeting or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges and hanging ,door fitting (exclusive of steel sheeting or other covering, running rails and guides) also fastening and fixingconforming to Fe-410-W (Grade E-250) quality "A" complete all as specified and as directed by the Engineer-in-Charge. |
| 78 | Supply and fixing factory made 2nd class hard wood 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (Part-1) kiln seasoned and chemically pressure treated complete all as specified and as directed by the Engineer-in-Charge. |
| 79 | Supply and fixing factory made 35 mm thick 2nd class hard wood glazed and skeletonshutters,open rebated and prepared to receive glass , gauze etc. (without sash bars) ,edges of framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part-I, Section-8, clause 8.24 (a) (wood shall be kiln seasoned and chemically pressure treated) complete all as specified and as directed by the Engineer-in-Charge. |
| 80 | S&F double shutter steel window box type ERW hollow P section comprising of glazed/gauged skeleton shutterfabricated fromfollowing sections :- (a) ERW hollow P section frame of size 60 mm x25 mm made from 1.25 mm thick MS sheet (02 Nos i.e. 01 for glazed shutter and 01 for gauzed shutter ). Both P section shall be welded with flat iron 25x03 mm thick all around of frame on both inner and outer faces . (b) Style and rails of window shutters shall be fabricated with ERW hollow P section of size 50 mm x25 mm made from 1.00 mm thick MS sheet and comprising of 02 Nos sash bars for glazed window leafof T – section20 x 03 mm thick and one No sash bar of 20 mm x 3 mm thick section for gauzed winodw leaf . (c) Vertical mullion shall be ERW hollow T -section of size 60 x 25 mmmade from 1.25 mm thickMS sheet (d) The above steel window shall be deemed to include the following accessories/ fittings : i)Hold fast 150mm long mild steel flat iron 12x3 mm thick made to shape- 04 Nos per window ii)Handle of Z section 20mmx25mm, 100mm long – 01 No per leaf. iii) MS tower bolt stove enamelled150mm long- 2 Nos per leaf. iv) Z section 20mmx25mm, 100mm long stopper – 01 No per leaf. (v) Cleat 55 mm long of solid square 15x20x.63mm square - 01 No per leaf |
| 81 | item No. 80 (contd....) vi)Pintal hinges 12 x 75 mm- 2 Nos each leaf vii) 10mm square Guard bar @ 10 cm c/c welded to frame . (viii) Two coat of Synthetic enamel paint over one coat ofred oxide primer. (ix) 0.36mm nominal dia of stainless steel wire mesh and average width of aperture of 1.40mm fixed in gauzed skelton shutter ofwindow with flat iron 15 x 03 mm with steel screws . (x) 3mm thick sheet glass, ordinary qualitywith oil putty in square n. exc 0.5sqm in each pane fixed in glass shutter of window. (xi) Fabrication and fixing arrangements as per specification including cutting holes and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as require and make finish good to the existing surface complete all as specified and directed. Notes : (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frames shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery, grill and other accessoriries as mentioned above. (iii) The window upto1.00 metre width shall consists of two leaves both for gauzed shutter and glazed shutter and all the shutters are openable.The window more than 1.00 metrewidth shall have two openable leaves onboth outer sidefor gauzed shutter and glazed shutter and middle leaf/shutter shall be fixed type. |
| 82 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm prelam PVC sheet on single side used instead of plain colour PVC sheet reinforced with MS square tube, edges will be painted to match with prelam sheet andfixed in opening complete all as specified and as directed by the Engineer-in-Charge. |
| 83 | S&F factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick (styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | M & LPCC 1:3:6 type C1 using 20mm graded crushed stone aggregate as in holdfasts complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | S & Fstainless steel butt hinges 100mm longmedium weight complete all as specified and as directed by the Engineer-in-Charge. |
| 86 | S&F 200 mm long aluminium anodised barrel tower boltsof extruded section and fixed complete all as specified and asdirected by the Engineer-in-Charge. |
| 87 | S&F 150 mm long aluminium anodised barrel tower boltsof extruded section and fixed complete all as specified and asdirected by the Engineer-in-Charge. |
| 88 | S&F 150 mm long aluminium handle fabricatedtype anodisedcomplete all as specified and as directed by the Engineer-in-Charge. |
| 89 | Supply and fixing 300mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge. |
| 90 | M & L sheet glass 3.00mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane as in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 91 | M & L frostedsheetglass 3mm thickand glazing with oil puttyor aluminium snap beading, rubber gasketin square not exc 0.5 sqm in each paneas in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 92 | M & L sheet glass 4.8mm thick ordinary quality and glazing with aluminium snap beading, rubber gasketin square not exc 0.5 sqm in each paneas in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 93 | M&L12 mm thick prelaminated particle board exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet , shelves for cupboard, frame with door if required including 3mm thick 2nd class hardwood leeping patti on cut edge of boardsas in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 94 | Supplyand fixingstainless steel wire cloths0.36 mm nominal dia of wire and averagewidth of aperature 1.40 mm and fixed with stainless steelwire staplecomplete all as specified and as directed by the Engineer-in-Charge. |
| 95 | Supplyand fixing as in repairstainless steel wire cloths0.36 mm nominal dia of wire and averagewidth of aperature 1.40 mm and fixed with stainless steelwire staplecomplete all as specified and as directed by the Engineer-in-Charge. |
| 96 | S&F mild steel 150 mm ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and as directed by the Engineer-in-Charge. |
| 97 | S & F stainlesssteel curtain rod 25mm dia having wall thickness 1.00mmwith and including stainless steeldecorative brackets,two lotto for each rod length at both endetc fixed with stainless steel screws as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 98 | M&Lpreparation of new woodensurfacesof any description, not otherwise described, over10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge. |
| 99 | S&F 18mm thick lead free PVC celuka ply ( minimum density 600 Kg/ Cum) of both side plain ofwhite colour fixed with stainless steel screws and solvent cement / adhesive to make kitchen / bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete all as per manufacturer"s specifications/ instructions as in repair complete all as specified and as directed by the Engr-in-charge. |
| 100 | S&F 18mm thick lead free PVC celuka ply (minimum density 600Kg per cum) of single side rigid lamination of approved colourand other side plainwhite colour fixed with stainless steelscrewsand solvent cement / adhesive to make kitchen / bed rooms cabinet sides, top and bottom and shelves inside the cabinets complete all as per manufacturer"s specifications/ instructions as in repair complete all as specified and as directed by the Engr-in-charge. |
| 101 | S & F for LEED FREE PVC Celuka ply 12 mm thick (minimum density600 Kg/Cum) of single side rigid lamination of approved colour and other side plain white colour fixed with stainless steel screws and solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawers sides complete as per manufacturer"s specifications as in repair complete all as specified and as directed by the Engr-in-charge. |
| 102 | S & F stainless steel (304 grade) modular kitchen pull out trays, baskets, cutlery trays, big utensil trays etc. of shape & size as directed by Engineer-In-Charge alongwith fixing acessories complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF, GLEN and GODREJ. |
| 103 | S & F stainless steel telesopic channel of best quality available in the marketof full extension load capacity minimum 50 Kg complete all as specified and directed by Engineer-in-Charge. Make : HETTICH, KAFF,GLEN and GODREJ. |
| 104 | S & F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified and direcrted by EIC Make : HETTICH, KAFF,GLEN and GODREJ. |
| 105 | S & F auto closing hinges of size 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position compete all as specified and directed by the EIC. Make : HETTICH, KAFF,GLEN and GODREJ. |
| 106 | Dismantling wooden scantlingof any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 107 | M & L mild steel rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates of Fe-410-W(Gde E-250) quality-B complete all as specified and as directed by the Engineer-in-Charge. |
| 108 | Dismantling of plain or corrugated ACsheet of any thickness incl Nainital or similar pattern coverings, complete all as specified and as directed by the Engineer-in-Charge. |
| 109 | S & FPre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick,having Zinc coating 150 gm per sqm(Az-150)of any colour having tensile strength of 550 Mpaas in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge. |
| 110 | S & FPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa, having Zinc coating 150 gm per sqm(Az-150)as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge. |
| 111 | Dismantling ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets of any size/ description complete all as specified and as directed by the Engineer-in-Charge. |
| 112 | S & F 5mm PVC hollow sheet (the thicknees of inner wall 0.7 to 1.00mm) panelling inclusive of solvent cement and fixing at site with U clip or PVC frame as per specifications and drawing complete all as specified and as directed by the Engineer-in-Charge. |
| 113 | Dismantling Brick tiles or terracing tiles, single layer on roofs complete all as specified and as directed by the Engineer-in-Charge. |
| 114 | Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by the Engineer-in-Charge. |
| 115 | M & L for providing cement concrete 1:2:4 Type B1 using 20mm graded crushed stone aggregate as in roof kerbs or mud stops,padding, rounded or chamfered on edges including from work where ever required complete all as specified and as directed by the Engineer-in-Charge. |
| 116 | Material & Labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bitumious primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25 degree centegrate temprature andviscosity 70-160 cps over the primer coat with overlap of 100mm at theside and 150mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standred practice as per manufacture"s instructions . The vital physical and chemical parameters of themembrane shell be under ;- (i) Joint strength in longitudinal and transverse direction at 23 degree centegrateat 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150 degree centegrate when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane onlycomplete all as specified and as directed by the Engineer-in-Charge. |
| 117 | M & Lcement concrete tiles 30 cm x 30cm x 20 mm thick, machine pressed laid on screed bed and joints groutedflush in CM (1:3) mixed with 5% crude oil by weight of cement including screed bed 15 mm thick in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge. |
| 118 | S&F 32 mm dia PVC waste pipe of standard length for wash hand basin / Kitchen sink etc asin repair complete all as specified and as directed by the Engineer-in-Charge. |
| 119 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts, wells, manholes etc. not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed by the Engineer-in-Charge. |
| 120 | Returning, filling in, including spreading, levlling ,watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer-in-Charge. |
| 121 | Removing surplus excavated materialto a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge. |
| 122 | M&Lpreparation of new steelsurfacesof any description, not otherwise described, over10 cm width or girth and applying two coats of synthetic enamel paintover a coat of red oxide primer complete all as specified and as directed by the Engineer-in-Charge. |
| 123 | Schedule "A" Part-II (E/M itmes) Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, pendant, lamp holder, regulators,socket outlet, etc and removing unserviceable materials from site of work and making good disturbed surfaces of walls, floors with cement mortar and white/colour wash to match with existing surfaces etccomplete all as specified and as directed by the Engineer-in-Charge. |
| 124 | Material and labour for point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall surfaces and on surface on ceiling surfacesand incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS-H, 1100 volt grade with multi stranded copper conductorgreen colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box or pressed steel terminal boxes modular type of size/modules as required at site with earth dolly(boxesshall be galvanised or painted with two coats of anti corrosive paint over a coat of red oxide primer bothinternally and externally) including provision of new covered plate over sunken box for housing themodular switches , modular socket outlets,modularfan regulators etc.for one light/fan/exhaust fan point controlledby one way switch,complete all as specified and as directedby Engineer-in-Charge. Note :-a) .All chases will be cut by chase cutter only b) Switch, socket outlet and fan regulators to be measured and paid forseparately . |
| 125 | Description same allas per item No. 124 but for One 3 pin 5 Amps socket outlet controlled by one switch on same board,complete all as specified and as directedby Engineer-in-Charge. |
| 126 | Description same all as per item No.124but for One 3 pin, 5 Amps, socket outlet controlled by one switch on independent board,complete all as specified and as directedby Engineer-in-Charge. |
| 127 | Description same all as per srl item No 124 here-in-before but for one socket outlet 15 Amp with 2.50 sq mm PVC insulated, unsheathedcable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 2.50 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copperwire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge. |
| 128 | Description same all as per srl item No 124 here-in-before but for one socket outlet 15 Amp with 4 sq mm PVC insulated, unsheathedcable FRLS-H, 1100 volt grade ISI marked with multi stranded copper conductor along with 4 sqmm PVC insulated , unsheathed cable green colour FRLS-H, 1100 volt grade ISI marked with multi stranded copperwire as earth continuity conductor connected to common earth dolly complete all as specified and as directed by the Engineer-in-Charge. |
| 129 | Supply and fix modular switch 1 module, single pole, one way 6 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 130 | Supply and fix modular switch 1 module, single pole, one way 16 Amps flush type, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 131 | Supply& fixmodular socket outlet2/3 pin combined,6 Amp, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 132 | Supply& fixmodular socket outlet3/3 pin combined, (6pin), 6/16 Amp, one way, two module, 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 133 | S&F electronic Fan regulator modular 100 watt, 1 module, 230 volts , 50 Hz, AC supply suitable for ceiling fan any type/make/sweep complete all as specified and as directed by the Engineer-in-Charge. |
| 134 | S&F modular bell push 6 Amp, 1 way, 1 module, 230 volts complete all as specified and as directed by the Engineer-in-Charge. |
| 135 | Supply & fixcalling bell ding dong 230 volt including removing unserviceable bell, complete all as specified and as directed by the Engr-in-charge. |
| 136 | Supply and fix ceiling rose surface type 2/3 terminalpolycarbonate, isolated body complete all as specified and as directed by the Engineer-in-Charge. |
| 137 | Supply and fixing lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directedby Engineer-in-Charge. |
| 138 | S&F LED lamp 9 wattthreaded/pin end, warm/cool lamp type as per site requirement suitable for fixing onbatten/angular holders as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 139 | Supply and fixing as in repair 20 watt linear tub road with PC housing for optimum light output, specially designed diffuser to avoid direct view of LED complete all as specified and as directedby Engineer-in-Charge. |
| 140 | Supply and fixing LED batten fitting 10-12 watt, 2 feet, aluminium housing and electronic driver including tube rod 10/12 watt cool/warm typeindustrial model complete,connecting with copper conductor flexible cablefrom ceiling rose to connector of the light complete all as specified and as directed by the Engineer-in-Charge. |
| 141 | Supply and fixingas in repairLED surface mounted bulk head luminaries 8-10 watt with min 800 lumen, industrial model, IP 65, aluminium housing, surge protection including driver & LED lampetc complete with all accessories, connecting with copper conductor flexible cablefrom ceiling rose to connector of the light as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 142 | S&F as in repair LED Bldg Security Light Fittings of capacity 20-25 watt made up of die castaluminiumhousing with black epoxy powder coating with cover heat resistance glass safety input voltage range 170 to 270 volts, industrial model with IP-65 protection and other connected accessories including electronic driver, service bracket of MS pipe 25 mm bore medium grade of length 0.90 mtr with MS clamps, bolts, nuts, and washers and suitable reducer for connecting fitting to MS pipe as required at site and two coats ofsynthetic enamel paintoverone coat of red oxide primer on mild steel work and making electrical connection, complete all as specified and as directed by the Engineer-in-Charge. |
| 143 | S&F single pole and neutral enclosure with a two pin and earth plug and socket 20 Amp complete with and including one single pole MCB.20 Amp, 10 KA "C" curve including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. |
| 144 | Supply and fix sheet metal MCB DB SPN 4 way with 200 Amps rated bus bar single pole and neutral withdouble door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces as in repaircomplete all as specified and as directed by the Engr-in-charge. |
| 145 | Supply and fix sheet metal MCB DB SPN 12 way with 200 Amps rated bus bar single pole and neutral withdouble door IP-54 fixed on wall duly grouted in solid block wall or on wooden board in and including copper lugs/thimbles duly crimped for connection, including making smooth the disturbed surfaces as in repaircomplete all as specified and as directed by the Engr-in-charge. |
| 146 | Supply and fix sheet metal enclosure triple pole & neutral, 415 volts, 4 way with 200 Amp rated bus bar flush /surface mounting double door with and including fixed type MCCB 100 Amp, 4 pole, 415 volts, 16 KAthermal adjustable type duly grouted in solid block wall or on wooden board in and includinglugs/thimbles duly crimped for connectionincluding making smooth the disturbed surface including removing old unserviceable enclosure complete all as specified and as directed by the Engr-in-charge. |
| 147 | Supply and fix MCB SP, 6-40 Amps, 240 volt,10 KA ,"C" curve as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 148 | Supply and fix MCB SPN, 40 to 63 Amps, 240 volt,10 KA ,"C" curve as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 149 | S & laying sub main wiring with two run of 4 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 4 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI markedmulti stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in PVC conduit medium gradeISI marked of adequate size for housing the wirescomplete all as specified. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.(ii) Three runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 150 | Supply and fixing LED batten fitting 18-20 watt, 4 feet, aluminium housing with electronic driver including tube rod 18/20 watt cool/warm typeindustrial model completeconnecting with copper conductor flexible cablefrom ceiling rose to connector of the lightas in repaircomplete all as specified and as directed by the Engineer-in-Charge. |
| 151 | Supply and fixing ceiling fan down rod 100cm long made out of 15 mm bore light grade GI pipe/MS pipe having provision of fixing U clamp & Fan including painting the pipe with superior quality white colour synthetic enamel paint as in repair complete all as specified and as directed by the Engr-in-charge. |
| 152 | Taking down and refixingexisting serviceable LED fittings of any description after cleaning complete all as specified and as directed by the Engineer-in-Charge. |
| 153 | Taking down and refixing existing serviceable security light fittings of any description after cleaning complete all as specified and as directed by the Engineer-in-Charge. |
| 154 | Disconnecting water supply/electric connection, taking down carefully electric geyser of any capacity and refixing the same after complition of work including making water supply/electric connectioncomplete all as specified and as directed by the Engineer-in-Charge. |
| 155 | S&FMCB 4 pole , 100 Amp, 415 Volts, 16 KA ,including fixing arrangement, andremoving oldunserviceable MCB complete all as specified and as directed by the Engr-in-charge. |
| 156 | S&F asin repair 9/12 watt LED light fitting wall mounting fixture (sketch type) including LED lamp compact and energy efficient epoxy powder coated luminaire and connecting with copper conductor flexible cablefrom ceiling rose to connector of the light complete including removing unserviceable light fittings all as specified and as directed by the Engineer-in-Charge. |
| 157 | Supply and fixing of heavy duty exhaust fan 300mm sweep with corrosion resistant steel body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotor mounted on two ball bearings, aerodynamically contoured blades, PVC base framewith rubbermountings for silent operation, maximum watt input not more than 50 watt, 1400 RPM,metal blades and shutter type louvers self-openable/ closeble for protecting the entrance of birds and testing as in repair complete all as specified and as directedby Engineer-in-Charge. |
| 158 | S & FLED post top luminaire 30W- 35W, 5700K, IP-65 made of pressure die-cast aluminium housing & clear glass 240 volt, 50HZ, AC supply completewithall accessories internally pre wiredincludingelectronic driver, connecting with fitting and including provision of 3 core PVC flexible copper conductor from electric supply source to connector of the light, including disconnecting and taking down existing light fitting and removing old unserviceable fitting complete all as specified and as directed by the Engr-in-charge. |
| 159 | Supply and fixas in repair modular PVC sheet/cover plate 3 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge. |
| 160 | Supply and fix asin repair modular PVC sheet/ cover plate 4 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge. |
| 161 | Supply and fixas in repair modular PVC sheet / cover plate 6 way suitable for fixing switch/socket/fan regulators etc on existing MS boxes of any make as per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge. |
| 162 | S & F switch piano flushtype , single pole, one way,6 Amp, 240 volt complete all as specified and as directed by the Engr-in-charge. |
| 163 | S & F bell push flushtype , single pole, one way,6 Amp, 240 volt complete all as specified and as directed by the Engr-in-charge. |
| 164 | S & F switch painoflush type , single pole, one way,16 Amp, 240 volt complete all as specified and as directed by the Engr-in-charge. |
| 165 | Supply& fixsocket outlet3 pin, 2 in 1, multipurpose6 Amp, flush type 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 166 | Supply& fixsocket outlet3 pin, 2 in 1, multipurpose16 Amp, flush type 230 voltscomplete all as specified and as directedby Engineer-in-Charge. |
| 167 | S & layingas in repair sub main wiring with four run of 10 sqmm PVC insulated , unsheathed cable FRLS-H,1100 volts grade ISI marked with multi stranded copper conductor and one run of 10 sqmm PVC insulated , unsheathed cable FRLS-H, 1100 volt grade ISI markedmulti stranded copper conductor as earth continuty conductor connected to common earth dolly including concealed on wall/ceiling surfaces in PVC conduit medium gradeISI marked of adequate size for housing the wirescomplete all as specified. Note: (i) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB.(ii) Five runs of cable and one run of PVC conduit shall be measured and paid as one unit length. |
| 168 | S&F as in repair of step type electronic Fan regulator modular 100 watt,1 module complete all as specified and as directed by the Engineer-in-Charge. Make: As per site requirement including removing unserviceable items, complete all as specified and as directed by the Engr-in-charge. |
| 169 | S & Fas in repair 3mm thick hylem sheets of size8" x 5"including refixing the serviciable switchs, sockets, regulator etc complete all as specified and as directedby Engineer-in-Charge. |
| 170 | S & Fas in repair heating coil 2000 watt in existing geyser of any type round/triangularcomplete all as specified and as directedby Engineer-in-Charge. |
| 171 | S & F thermostat range of 30-80 degreeas per site requirementas in repair complete all as specified and as directedby Engineer-in-Charge. |
| 172 | S&F brass connection pipe having wire mesh coating over it with PTMT nuts and washers suitable for connecting geysers inlet and outlet with GI tubings including taking out old unserviceableconnections all as specified and as directed by Engr-in-charge. |
| 173 | Supply and fixingas in repairheavy duty wall mounting fan450 mm sweep with corrosion resistant PVC body, minimum noise, operation and maintenance free design, totally enclosed, highly efficient, heavy duty motor with pressure die cast aluminium rotormounted on two ball bearings, aerodynamically contoured blades, rigid frame ,1400 RPM,PVC blades andtesting complete all as specified and as directedby Engineer-in-Charge. |
| 174 | Note:-Amount of credit ofRs. 66,794.00 for retrieved materials is mentioned in Schedule of Credit Page No. 146 to 148 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
