Orissa Mining Corporation Limited has published Tender For Construction Of Security Barrack G Plus 3 At Dubna Mines Of Barbil Region In The District Of Keonjhar.. Submission Date for this Tender is 12-04-2024. Barrack Tenders in Kendujhar Odisha. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Civil Work |
| 2 | Excavation, loading, unloading and carriage by mechanical means of all kinds of soil, including stoney earth, gravel and moorum etc interspread with boulders upto 1/2 cum size with all lifts and delifts including trimming of slopes and bed to design section and depositing the the excavated materials away from work site as per the specification and as directed by the Engineer in-charge within an initial lead of 1.5km from the place of excavation complete to a depth of 3 mtr as per direction of EIC |
| 3 | Excavation of founation in lateriterock or any hardrock (other than granite or disintigrated rock) removedby chiselling including dressing and levelling the bednot exceeding 1.5m in depth and depositing the excavated materials at places away from the work site with all leads and lifts, T&P etc. comp. as directed by EIC. |
| 4 | Carriage and disposal of surplus earth within a lead of 05 km including loading and unloading and cost of conveyance, labour & T&P required to complete the work as per direction of EIC. |
| 5 | Filling in foundation and plinth with good river sand including laying,watering and ramming in 23 Cm. (9”)thick layers with all leads and lifts comp. inclusive of all cost of labour , T&Prequired for the work etc. complete as per direction of EIC. |
| 6 | P.C.C. of prop. (1:3:6) in foundation using 40 mm. size crusher broken hard granite metal of approved quality from approved quarry including lowering, laying concrete to required levels laid in layers not exceeding 150mm thick including cost, conveyance, royalties of all materials, watering and curing and cost of all labour, T&P required for the work etc. comp as per direction of EIC. |
| 7 | C.C. of prop. (1:2:4) in allfloors using 12mm (1/2”) size hard crusher broken granite chips of appd. Quality from appd. quarry including centering, shuttering to wall side & lowering, laying, concrete, watering and curing etc. comp. to required levels laid in layers not exceeding 150mm thick including cost, conveyance, royalties of all materials and cost of all labour, T&P required for the work etc. complete as per direction of EIC |
| 8 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills IN FOOTING |
| 9 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Column Ground Floor |
| 10 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Column First Floor |
| 11 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Column Second Floor |
| 12 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Column Third Floor |
| 13 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Column Terrace Floor |
| 14 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Plinth Beam |
| 15 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Beam Ground Floor |
| 16 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Beam First Floor |
| 17 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Beam Second Floor |
| 18 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Beam Third Floor |
| 19 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Beam Terrace Floor |
| 20 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Lintel Ground Floor |
| 21 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Lintel First Floor |
| 22 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Lintel Second Floor |
| 23 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Lintel Third Floor |
| 24 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills in Lintel Terrace Floor |
| 25 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Slab Ground Floor |
| 26 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Slab First Floor |
| 27 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Slab Second Floor |
| 28 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Slab Third Floor |
| 29 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inRoof Slab Terrace Floor |
| 30 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inStaircase Ground Floor |
| 31 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inStaircase First Floor |
| 32 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inStaircase Second Floor |
| 33 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inStaircase Third Floor |
| 34 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inChajja in Ground Floor |
| 35 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inChajja in FIrst Floor |
| 36 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inChajja in Second Floor |
| 37 | R.C.C M-20 grade concrete with20mm & down graded hard crusher broken granite chips including hoisting and laying concrete, watering and curing for three weeks centering and shuttering and finishing the exposed surfaces smooth, providing beads or grooves where necessary including cost, conveyance, royalty of all material, dismantling the centering, shuttering work after the period as specified by the EIC and cost of all labour, T&P required for the work comp. in all respect, excluding cost of reinforcement, binding wires and labour charges for bending, binding and tying the grills inChajja in Third Floor |
| 38 | Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work, including cost, conveyance of HYSD bars Fe500 and binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC in Ground Floor |
| 39 | Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work, including cost, conveyance of HYSD bars Fe500 and binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC in First Floor |
| 40 | Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work, including cost, conveyance of HYSD bars Fe500 and binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC in Second Floor |
| 41 | Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work, including cost, conveyance of HYSD bars Fe500 and binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC in Third Floor |
| 42 | Supplying HYSD bars of approved quality size and grade and cutting, bending, binding and tying the grills in proper position as required for the RCC work, including cost, conveyance of HYSD bars Fe500 and binding wires of 18 to 20 gauge and cost of labour,T & P and other materials complete in all respact as directed by the EIC in Terrace Floor |
| 43 | Fly ash brick masonry in C.M.(1:6) after immersing the bricks having minimum crushing strength of 75 Kg/Cm2 in water for 24 hours having size of 25cmx12cmx8cm in foundation & plinthwith ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC. |
| 44 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC in Ground Floor |
| 45 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC in First Floor |
| 46 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC in Second Floor |
| 47 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC in Third Floor |
| 48 | Fly ash brick masonry in C.M.(1:6) having minimum crushing strength of 75 Kg/Cm2 size of 25cmx12cmx8cm in Superstructure with ornamental molding and other similar type of works with all necessary projections, splays corbelling, cutting, champering, including cost conveyance, royalties of all materials, cost of all labour, T&P required for the work etc. compl. in all respect as per direction of EIC in Terrace Floor |
| 49 | 12mm (1/2") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC in Ground Floor |
| 50 | 12mm (1/2") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC in First Floor |
| 51 | 12mm (1/2") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC in Second Floor |
| 52 | 12mm (1/2") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC in Third Floor |
| 53 | 12mm (1/2") thick cement plaster (1:6) for finished smooth surface of brick walls after racking out the joints including watering and curing etc. comp. with cost conveyance, royalty of all materials and cost of all labour, T&P scaffolding required for the work complete as per the direction of EIC in Terrace Floor |
| 54 | 16mm (5/8") thick cement plaster with (1:6) for finished smooth to outside surface of brick walls in all floors racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Ground Floor |
| 55 | 16mm (5/8") thick cement plaster with (1:6) for finished smooth to outside surface of brick walls in all floors racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in First Floor |
| 56 | 16mm (5/8") thick cement plaster with (1:6) for finished smooth to outside surface of brick walls in all floors racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Second Floor |
| 57 | 16mm (5/8") thick cement plaster with (1:6) for finished smooth to outside surface of brick walls in all floors racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Third Floor |
| 58 | 16mm (5/8") thick cement plaster with (1:6) for finished smooth to outside surface of brick walls in all floors racking out the joints including watering and curing etc. Complete. with cost , conveyance, royalty of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Terrace Floor |
| 59 | 6mm thick cement plaster (1:4) to RCC surfaces/ ceiling finished smooth including closed deep chiping and slury treatment including watering and curing etc. Comp. with cost , conveyance, of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Ground Floor |
| 60 | 6mm thick cement plaster (1:4) to RCC surfaces/ ceiling finished smooth including closed deep chiping and slury treatment including watering and curing etc. Comp. with cost , conveyance, of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in First Floor |
| 61 | 6mm thick cement plaster (1:4) to RCC surfaces/ ceiling finished smooth including closed deep chiping and slury treatment including watering and curing etc. Comp. with cost , conveyance, of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Second Floor |
| 62 | 6mm thick cement plaster (1:4) to RCC surfaces/ ceiling finished smooth including closed deep chiping and slury treatment including watering and curing etc. Comp. with cost , conveyance, of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Third Floor |
| 63 | 6mm thick cement plaster (1:4) to RCC surfaces/ ceiling finished smooth including closed deep chiping and slury treatment including watering and curing etc. Comp. with cost , conveyance, of all materials and cost of all labours, T&P scaffolding required for the work complete as per direction of EIC in Terrace Floor |
| 64 | Supplying all materials, labour, T&P and fixing prepolished Kota tile of 16 mm thick above 0.10 sqm on floors on 20 mm thick bed of cement mortar (1:4) (1 Cement : 4 sand) jointed with neat cement, slurry mixed with pigment to match the shades of tiles complete as per specification and direction of EIC including cost, carriage, cost of all labour, T&P required to complete the work in Ground Floor |
| 65 | Supplying all materials, labour, T&P and fixing prepolished Kota tile of 16 mm thick above 0.10 sqm on floors, steps, dado on 20 mm thick bed of cement mortar (1:4) (1 Cement : 4 sand) jointed with neat cement, slurry mixed with pigment to match the shades of tiles complete as per specification and direction of EIC including cost, carriage, cost of all labour, T&P required to complete the work in First Floor |
| 66 | Supplying all materials, labour, T&P and fixing prepolished Kota tile of 16 mm thick above 0.10 sqm on floors, steps, dado on 20 mm thick bed of cement mortar (1:4) (1 Cement : 4 sand) jointed with neat cement, slurry mixed with pigment to match the shades of tiles complete as per specification and direction of EIC including cost, carriage, cost of all labour, T&P required to complete the work in Second Floor |
| 67 | Supplying all materials, labour, T&P and fixing prepolished Kota tile of 16 mm thick above 0.10 sqm on floors, steps, dado on 20 mm thick bed of cement mortar (1:4) (1 Cement : 4 sand) jointed with neat cement, slurry mixed with pigment to match the shades of tiles complete as per specification and direction of EIC including cost, carriage, cost of all labour, T&P required to complete the work in Third Floor |
| 68 | Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 20 mm thick cement mortar (1:4) (1 cement:4 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Nitco / Kajaria / Bell / Somany/Pavit) in Ground Floor |
| 69 | Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 20 mm thick cement mortar (1:4) (1 cement:4 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Nitco / Kajaria / Bell / Somany/Pavit) in First Floor |
| 70 | Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 20 mm thick cement mortar (1:4) (1 cement:4 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Nitco / Kajaria / Bell / Somany/Pavit) in Second Floor |
| 71 | Supplying all materials, labour, T&P and fixing antiskid ceramic floor tile of 300mmx300mm size of approved brand and shade on 20 mm thick cement mortar (1:4) (1 cement:4 sand)jointed with neat cement, slurry mixed with pigment to match the shed of tiles complete as per specification and direction of EIC including cost, carriage of all materials cost of all labour, T&P required to complete the work.(Tiles should be of Nitco / Kajaria / Bell / Somany/Pavit) in Third Floor |
| 72 | Supplying all materials,labours.T & P and fixing glazed ceramicwall tile of 200mmx300mm/300x450 mm size of appd. Brand and shadein wall / dados skirting and risers of steps on 12mm thickcement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost, conveyance, royalitiesof all materials and cost of all labour,T & P required for the work etc as per direction of EIC..(Tile of Bell/ Somany/ Kajaria/ Nitco/Johnson/Pavit to be used.) in Ground Floor |
| 73 | Supplying all materials,labours.T & P and fixing glazed ceramicwall tile of 200mmx300mm/300x450 mm size of appd. Brand and shadein wall / dados skirting and risers of steps on 12mm thickcement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost, conveyance, royalitiesof all materials and cost of all labour,T & P required for the work etc as per direction of EIC..(Tile of Bell/ Somany/ Kajaria/ Nitco/Johnson/Pavit to be used.) in First Floor |
| 74 | Supplying all materials,labours.T & P and fixing glazed ceramicwall tile of 200mmx300mm/300x450 mm size of appd. Brand and shadein wall / dados skirting and risers of steps on 12mm thickcement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost, conveyance, royalitiesof all materials and cost of all labour,T & P required for the work etc as per direction of EIC..(Tile of Bell/ Somany/ Kajaria/ Nitco/Johnson/Pavit to be used.) in Second Floor |
| 75 | Supplying all materials,labours.T & P and fixing glazed ceramicwall tile of 200mmx300mm/300x450 mm size of appd. Brand and shadein wall / dados skirting and risers of steps on 12mm thickcement plaster (1:3) jointed with neat cement slury mixed with pigment to match the shades of the tiles complete including cost, conveyance, royalitiesof all materials and cost of all labour,T & P required for the work etc as per direction of EIC..(Tile of Bell/ Somany/ Kajaria/ Nitco/Johnson/Pavit to be used.) in Third Floor |
| 76 | Providing Granite stone prepolished 20 mm thick in flooring of approved quality, colour and size in kitchen slab, floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in Ground Floor |
| 77 | Providing Granite stone prepolished 20 mm thick in flooring of approved quality, colour and size in kitchen slab, floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in First Floor |
| 78 | Providing Granite stone prepolished 20 mm thick in flooring of approved quality, colour and size in kitchen slab, floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in Second Floor |
| 79 | Providing Granite stone prepolished 20 mm thick in flooring of approved quality, colour and size in kitchen slab, floors, treads on steps and landings in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and grouted with neat white cement slurry jointing the tile with neat white cement slurry mixed with required quantities of pigments of approved marks to match the shades of the granite tile including cost, conveyance, loading, unloading, royaltiesof all materials, cost of all labour, T&P required for the work etc. complete in all respect as per specification and direction of Engineer-in-charge in Third Floor |
| 80 | Providing and fixing in position WPC frames of size 125mmx65 mm to doorsfixed with MS hold fast of 35x5mm embedded in cement concrete blocks 15x10x10cm of 1:3:6 (1 cement : 3 coarse sand : 6 graded sTonnese aggregate 20mm nominal size) complete with all materials, labours, T & P including cost, conveyance, loading, sundries required for the work etc. complete in all respect as directed by the Engineer-in-charge (Make:Greenply/Century/Alstone) |
| 81 | Providing, fitting and fixing of 32mm thick BWR factory made flush door with both side lamination with 1mm thick laminates as per the specification complete with all materials, inclusive of all hardware material, hinges, nails, screws, doorknobs, handles, topper etc. including the cost of all materials, labour and T&P and overheads etc. complete. The exposed wood work shall be finished with automotive paint. two coats with primer. The rates also includes the cost of 40 x 25mm wooden beading for the partition in front of the door and finished with automotive paints and as per direction of EIC. (BWR board will be of Century / Gattani / Mayur) |
| 82 | Providing and fixing of35mm thickWPC Door Shutter(Solid) with pvc edge leaping to the periphery of the shutter with lamination filishing all around as per detailed drawing with including, all hardwares & fixtures, SS tower bolt(150mm),Door stopper,SS aldrop(250mm),SS handle(200mm length),ss handle (150mm length) & SS Butt hinges -125mm x 65mm x2.12mm .including cost, conveyance, loading, T&P required for the work etc. complete in all respect as directed by the Engineer-in-charge.(Make:Greenply/Century/Alstone) |
| 83 | Supplying fitting and fixing of 12mm thick Toughened glass door with top and bottompatch fittingsincluding cost of Floor Spring, door handleandall fittings with cost of all labour, materials andT&P etc. complete as per direction of EIC. (Hardware fittings should be DORMA/HATTICH make) |
| 84 | Supplying, fitting, fixing angle, window frames with M.S. grills as per approved drawing and design given by EIC in all floors made out of standard rolled steel section 40mm x 40mm x 6mm size with corners of frames duly metered and electrically welded with 6 nos. of hold fast for doors and 4 nos. hold fast for windows with required nos. of 100mm and 14 SWG thick for door and 75mm and 14 SWG thick for windows including provision of 50mm hinges for cleats duly welded window frames are to be provided with M.S.Grills made out of 19mm x 5mm flat duly welded to the frame including one coat of anti-corrosive red oxide paint as per direction of EIC. |
| 85 | Supplying, fitting, fixing of system window (sliding/Fixed type) made up powder coated aluminum Section 151-154, 151-155, as windows frame section No. 151-155, 151-153 and 151-167 as shutter frame with 5mm thick Reflective glass as panel fitted with rubber beading including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge. (Make:Domal/Aluk/Reclad) |
| 86 | Providing, Supplying & applyingfinishing wall surface of wall with Acrylic wall putty (water based) of approved make and finished smooth and even surface to recive painting on the interior and exterior surface of the wall including watering curing cost conveyance taxes of all materials cost of all labour and T&P required for the work etc. complete in Ground Floor |
| 87 | Providing, Supplying & applyingfinishing wall surface of wall with Acrylic wall putty (water based) of approved make and finished smooth and even surface to recive painting on the interior and exterior surface of the wall including watering curing cost conveyance taxes of all materials cost of all labour and T&P required for the work etc. complete in First Floor |
| 88 | Providing, Supplying & applyingfinishing wall surface of wall with Acrylic wall putty (water based) of approved make and finished smooth and even surface to recive painting on the interior and exterior surface of the wall including watering curing cost conveyance taxes of all materials cost of all labour and T&P required for the work etc. complete in Second Floor |
| 89 | Providing, Supplying & applyingfinishing wall surface of wall with Acrylic wall putty (water based) of approved make and finished smooth and even surface to recive painting on the interior and exterior surface of the wall including watering curing cost conveyance taxes of all materials cost of all labour and T&P required for the work etc. complete in Third Floor |
| 90 | Providing, Supplying & applyingfinishing wall surface of wall with Acrylic wall putty (water based) of approved make and finished smooth and even surface to recive painting on the interior and exterior surface of the wall including watering curing cost conveyance taxes of all materials cost of all labour and T&P required for the work etc. complete in Terrace Floor |
| 91 | Providing two coats of plastic emulsion painting of approved shade (Washable type) over a coat of primer to give an even shade to surface of wall, including cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete as directed by EIC.( Paints of Berger/ ICI/ Nerolac / Asian to be used)in Ground Floor |
| 92 | Providing two coats of plastic emulsion painting of approved shade (Washable type) over a coat of primer to give an even shade to surface of wall, including cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete as directed by EIC.( Paints of Berger/ ICI/ Nerolac / Asian to be used)in First Floor |
| 93 | Providing two coats of plastic emulsion painting of approved shade (Washable type) over a coat of primer to give an even shade to surface of wall, including cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete as directed by EIC.( Paints of Berger/ ICI/ Nerolac / Asian to be used)in Second Floor |
| 94 | Providing two coats of plastic emulsion painting of approved shade (Washable type) over a coat of primer to give an even shade to surface of wall, including cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete as directed by EIC.( Paints of Berger/ ICI/ Nerolac / Asian to be used)in Third Floor |
| 95 | Providing two coats of plastic emulsion painting of approved shade (Washable type) over a coat of primer to give an even shade to surface of wall, including cost, conveyance of all materials, cost of all labour, T&P required for the work etc. complete as directed by EIC.( Paints of Berger/ ICI/ Nerolac / Asian to be used)in Terrace Floor |
| 96 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) in Ground Floor |
| 97 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) in First Floor |
| 98 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) in Second Floor |
| 99 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) in Third Floor |
| 100 | Weather coat two coats of approved brand and shade overa coat of primer over exterior surface of wall exposed to weather including cost of brush, scaffolding, staging charges with cost, conveyance of all materials, cost of all labour, T&P etc. complete as directed by EIC. (Weather coat should of ICI/Berger/Asian is to be used) in Terrace Floor |
| 101 | Painting two coats with anticorrosive paint of appd. Brand of synthetic enamel paint cost, carriage and quality over a coat of red-oxide primer to iron works including cost of all materialscost of all labour and T&P, scaffolding etc required for the work etc. comp. (paints of Burger, Nerolac, J&N & Asian ICIBrand is to be used.) in Ground Floor |
| 102 | Painting two coats with anticorrosive paint of appd. Brand of synthetic enamel paint cost, carriage and quality over a coat of red-oxide primer to iron works including cost of all materialscost of all labour and T&P, scaffolding etc required for the work etc. comp. (paints of Burger, Nerolac, J&N & Asian ICIBrand is to be used.) in First Floor |
| 103 | Painting two coats with anticorrosive paint of appd. Brand of synthetic enamel paint cost, carriage and quality over a coat of red-oxide primer to iron works including cost of all materialscost of all labour and T&P, scaffolding etc required for the work etc. comp. (paints of Burger, Nerolac, J&N & Asian ICIBrand is to be used.) in Second Floor |
| 104 | Painting two coats with anticorrosive paint of appd. Brand of synthetic enamel paint cost, carriage and quality over a coat of red-oxide primer to iron works including cost of all materialscost of all labour and T&P, scaffolding etc required for the work etc. comp. (paints of Burger, Nerolac, J&N & Asian ICIBrand is to be used.) in Third Floor |
| 105 | Filling in foundation and plinth or floor with excavated earth or moorum or extra good earth including laying, watering and ramming in 23 Cm (9") thick layers with all necessary leads and lifts complete inclusive of all cost of labour T&Petc. complete as per direction of EIC. |
| 106 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90 mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification buffing, polishing etc with cost, conveyance of all materials, labour, T&P etc required for the complete in all respect as per direction of EIC. (Make:- Jindal) |
| 107 | Providing edge moulding to 20 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 108 | Providing 25mm thick grading concrete in C.C. (1:2:2) laid in proper slope over terrace roof slab by using two part of sand, one part of cement and two parts of6mm size black hard crusher broken granite chips with addition of water proofing compound of approved brand and quality to be mixed with specified ratio including watering, curing, cost, conveyance, royalties of all materials, cost of all labour, T&P etc. complete as required for the finished item of work as directed by the Engineer-in-charge in Terrace Floor |
| 109 | Construction of granular Sub-base by providing closegraded (Grading-II) materials, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve desired density complete as per Clause-401-1 of MoRT&H and as per direction of EIC. |
| 110 | Supplying and laying of M30 grade heavy duty factory made hydraulically pressed and mechanically compacted pre castUni Paver blocks of 60mm thick of approved shape by preparation of sub base with 50mm sand and leveling,laying of approved shape and size paver block with sand binding and final compaction with plate vibrator finishing the surface including cutting of blocks at the edges with all labour and materials etc complete in all respect confirming to IS 5758:1984 as per direction of Engineer-in-charge.(Make-Samudyam/GICO or equivalent) |
| 111 | 12mm (1/2”) thick cement plaster (1:4) with neat cement punning over brick masonry wall in all floors after racking out the joints including watering and curing etc. complete with cost, conveyance, royalty and cost of all materials and cost of all labour, T&P, required for the work complete as per specification & direction of EIC. |
| 112 | Supplying all labour and materials for construction of inspection chamber of size 760mmX760mmX450mm including earth work excavation in all kind of soil, CC (1:4:8) with 40 mm size metal,C.C. (1:2:4) with black hard granite chips of 12mm (1/2") size, brick work using K.B.Bricks having minimum crushing strength not less than 75 Kg. per cm2 in C.M. (1:6) 12mm cement plaster (1:3) inside the chamber and over benching, cement flush painting (1:3) to outside of the Chamber, providing R.C.C. roof slab with C.C. (1:2:4) with broken hard granite chips 12mm, bending, binding and tying the grills and centering and shuttering, providing C.I. manhole cover with two coats and anti corrosive paint and filling the cavity along the chamber with excavated earth including channelling the bed of manhole etc. complete as per P.H. specification & direction of EIC. |
| 113 | Labour for drilling a perfectly vertical bore hole of 250x125mm dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rigs or combination drilling rigs (1200 cfm/ 300 psi) as required to suit the site condition as per the direction of Engineer-in-charge including use of own rigs with its accessories, tools and plant and consumables etc for lowering of 200 mm dia PVC/GI pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (GI/PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the bore well). Drilling Hole (0 to 140 Mtr.) |
| 114 | Lowering of 125 mm dia GI/PVC pipe of Schedule-80 with or without slotted pipe as per necessity from ground level & fitted up to perfectly vertical position including cutting & threading of pipe, Supplying and fixing of all jointing materials, tools & plant etc. complete & keeping the top of the casing pipe threaded plugging tube wells to prevent entry of foreign materials from above including cost, carriage, royalty and taxes of all materials cost of all labour, T&P etc. complete as directed by EIC. (Make:- Oriplast / Hariplast/Supreme) |
| 115 | Cleaning & developing the bore well using their own compressor continuously working till clear & adequate discharge is obtained from the tube well including supply & use of all necessary equipments and labour as per the direction or Engineer-in-Charge. (Developing the bore well by DTH/ ROTARY drill). |
| 116 | Laying in trenches High Density Polyethylene Pipes of 62 mm outside dia of PN 16 and SDR 7.4 conforming to IS 4984 - 1995 and Specials and jointing by Fusion welding method including excavation of trench and laying the pipe and filling the trench with excavated earth and testing as per specification complete as per direction of EIC. (Make: Oriplast/ Supreme/ Hariplast/Jindal ) |
| 117 | Supplying fitting and fixing of 62 mm dia tappered stainless steel nipple with stainless steel nut & bolt of approved quality including cost conveyance of all materials as per direction of EIC. |
| 118 | Supplying all materials, labour, tools and plant and providing sanitary sealing by cementconcrete grouting of annular space around GI/PVC/MS housing pipe upto 5 mtrs below ground level (as per drawing) to plug the bore hole including cost of cement etc. all complete as per direction of Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing as per direction of EIC. |
| 119 | Conveying, supplying & packing the bore with washed gravel/ pebbles of required size & specification around the pipe including cost, carriage, royalty of all material, cost of all labour, T&P etc. complete as per direction of EIC. |
| 120 | Supplying and fixing of 150mm dia M.S. cap over the top of 125mm dia casing pipe etc. complete as per direction of EIC |
| 121 | Supplying and tying engineering rope of 8 mm dia nylon of approved quality and size with the submersible pump and HDPE pipe including all cost as per direction of EIC. |
| 122 | Supplying, installation, commissioning & testing of 2 HP single phase water cooled submersible pump of low discharge high head upto 100mtr , 250V/ 50Hz including all accessories, T&P etc. complete work as directed by EIC. (Make- KSB TEXMO / Kirloskar) |
| 123 | Supplying, fitting & fixing of two way control panel board with automatic DOL starter (L&T) fitting with MS angle & MS box with locking arrangement suitable upto 2 HP submersible pump including all accessories, all materials, cost of all labour for installation, T&P etc. complete as per the direction of EIC. (Make- BCH/ Havells/ Simens / L&T) |
| 124 | Supplying & lowering 4 sqmm submersible flat copper cable of Finolex/ Havell’s/Polycab make from pump set to starter panel including all accessories, cost of all labour, cost of all materials T&P etc. complete as per the direction of EIC. |
| 125 | Supplying all materials, equipments, labour and conducting reconnaissance survey integrated hydrological and geophysical survey and selection of potential source for exploration of ground water including selection and recommendation of site for successful drilling of production bore well as per direction of EIC |
| 126 | Supplying and fixing of 32AMp sigle phase main switch of Anchor -make including all accessories, cost of all labour, cost of all materials T&P etc. complete as per the direction of EIC. |
| 127 | Supplying, fitting & fixing of Service Line in 6 Sqmm PVC weather proof twin core alluminium cable run on 8 SW/ G.I wire and lined with link clip 1" dia G.I Pipe for service (100.00 Mtr length) |
| 128 | Supplying all materials and fixing of chemical earthing including supply of 25 kgs back filling compound including excavation earth chamber with RCC slab cover with all accessories, labour cost, T&P etc compleete as per direction of EIC. |
| 129 | Fixing of Brass or Gun Metal Full Way Valve of 32 mm diameter conforming to IS:781-1995 of the following nominal sizes with wheel as per specification required to complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc as per PH specification all complete as per direction of Engineer-in-charge.(Make:- Shakti / Leader) |
| 130 | Supplying all materials, labour, T&P and fitting & fixing 40 mm dia brass non return valve with supply ofjointing materials completeas per specification and direction of the Engineer in charge. (Make:- Shakti / Leader) |
| 131 | Providing and laying in trenches 32 mm galvanized mild pipe conforming to IS:1239/2004, Part-1 of the following nominal bore and tube fittings including testing as per specification complete. including Earth work eath work in excavation and filling of earth complete as specification and direction of EIC. |
| 132 | Supplying all materials, labour, T&P and fixing European Wash Down Water Closer and seat cover with integral "S" or "P" trap to the floor/wall with wooden plug and chromium plated screws including jointing the trap with soil pipe in cement mortar (1:1) etc all complegte as per specification and direction of EIC. (Make:- CNS WHT 959SPP /Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 133 | Supplying all materials, labour T&P for fitting and fixing 550x440mm of approved make IWC Pan with 4" dia PVC "P" trap including supply of necessary jointing materials, cement concrete, sand etc. for fixing the pan, "P" trap including cutting the floor and making good to the damages etc. all complete as per direction of EIC and as per PH specification. (Make: Hindware-ORISSA PAN/Jaquar/ Kohler/ Cera/ Tota/ Roca/Parryware/Grohe ) |
| 134 | Supplying all materials, labour T&P and fitting and fixing of 10 ltr. Capacity PVC Low level flushing cistern with flush bend and a pair of white enameled coat iron bracket 12mm dia PVC inlet connection pipe (0.45 m long) with brass union including cutting hole and making good to the same and connecting the inlet pipe with supply main etc. all complete as per specification and direction of EIC. (Make:Jaquar make- JCS WHT 2400 with flush control/ Kohler/ Cera/ Tota/ Roca/Parryware/Grohe) |
| 135 | Supplying all materials, labour, T&P and fixing of wall hung half pedestal wash hand basin with hole for pillar taps with cast iron or M.S. brackets painted white including cutting holes in wall and making good the damages including fixing of CP waste, PVC waste pipe and PVC connection pipes recessed at the back for the reception of pipes and fittings /fixtures of approved make with supply of all jointing materials complete including 15 mm dia CP pillar cock as PH specificationetc. all complete as per specification and direction of the Engineer in charges. (Make:Jaquar/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 136 | Supplying all materials, labour, T&P and fixing 600mmx600mm size B.E Mirror( fixed type) over 6mm thick WPC board backing with supply of all jointing materials complete as per PH specification and direction of EIC (materials to be approved by the EIC before use) (Make-Saint Gobin/ Modi/ Golden Fish / Silver Fish). |
| 137 | Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP sink cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:Jaquar KUP 35037PM/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 138 | Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP long body bib cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:Jaquar/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 139 | Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP bib cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make: Jaquar/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 140 | Supplying all materials, labour, T&P and fixing standard sized Two wayBib cock ofapproved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification complete as per direction of Engineer-in-charge. 15mm dia CP Two waybib cock with Flange (Make:Jaquar/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 141 | Supplying all materials, labour, T & P and fitting and fixing 15mm dia CP anglular stop cock withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:Jaquar KUP 35053PM /Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 142 | Supplying all materials, labour, T&P and fixing standard sizedChromium Plated Glass Shelf corner ofcomplete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge.jaquar-ACN-1173 /Kohler/Cera/Tota/Roca/Parryware/Grohe |
| 143 | Supplying all materials, labour, T&P and fixing (a) CP soap case holder complete with CP brass brackets fixed to wooden plugs with CP screws or (b) Liquid soap container - Glass container or Plastic container with CP lid and brackets fixed to wooden plugs with CP screws or (c) white glazed tooth brush holder fixed to wooden plugs with CP screws as per specification and direction of the Engineer in charges. (Make: Jaquar AKP 35731P /Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 144 | Supplying all materials, labour, T&P and fitting fixing of 5000 ltr. Capacity PVCwater tank(Sintex make triple layer) over roof slab in proper position including providing over flow, wash out, extra socket jam nut if required complete as per specification and direction of Engineer-in-Charge including cost, carriage, taxes of all materials, cost of labour, T&P required to complete the work as per direction of EIC. |
| 145 | Supplying all materials, labour, T&P for fitting & fixing and laying20mm dia UPVC pipe(sch-80) and fittings including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme) |
| 146 | Supplying all materials, labour, T&P for fitting & fixing and laying25mm dia UPVC pipe(sch-80) and fittings including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme) |
| 147 | Supplying all materials, labour, T&P for fitting & fixing and laying32 mm dia UPVC pipe(sch-80) and fittings including supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including earth work in all kind of soil and rock and refilling the trenches including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme) |
| 148 | Providing, fixing, Testing and Commissioning Stainless Steelkitchen sink with drain board (304 grade SS) of size 36""x18""x10"" with drain board with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever requiredincluding cutting and making good the wall wherever required complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc as per PH specification all complete as per direction of Engineer-in-charge.(Make:NIRALI OLYMPIA or equivalent) |
| 149 | Supplying all materials, labour, T&P for fitting and fixing and laying 110 mm dia unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps etc as per PHspecification and direction of the Engineer in charge.(Make-Hariplast/Oriplast/Supreme) |
| 150 | Supplying all materials, labour, T&P for fitting and fixing and laying 75 mm dia unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion including supply of all jointing materials like Gaskets, adhesive, solvent, cement etc and fixing to walls with supply of wooden plugs and nails, bobbins, clamps etc as per PHspecification and direction of the Engineer in charge.(Make-Hariplast/Oriplast/Supreme) |
| 151 | Supplying all materials, labour, T&P for fitting & fixing and laying 110 mm dia PVC Door bend ofincluding supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:ORIPLAST/ Hariplast / Supreme) |
| 152 | Supplying all materials, labour, T&P for fitting & fixing and laying 110mm dia PVC SWR Tee including supply of all jointing materials like gaskets, adhesive ,solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make :- Oriplast/Hariplast/Supreme) |
| 153 | Supplying all materials, labour, T&P for fitting & fixing and laying 110 mm dia PVC HR bend ofincluding supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:ORIPLAST/ Hariplast / Supreme) |
| 154 | Supplying all materials, labour, T&P for fitting & fixing and laying 110mm dia PVC cowel ofincluding supply of all jointing materials like gaskets, adhesive ,solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme) |
| 155 | Supplying all materials, labour, T & P and fitting and fixing 25mm dia upvc ball valve withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:ORIPLAST/ Hariplast / Supreme) |
| 156 | Supplying all materials, labour, T & P and fitting and fixing 32 mm dia upvc ball valve withsupply of all jointing materials complete as per specification and direction of the Engineer - in - charge. (Make:ORIPLAST/ Hariplast / Supreme) |
| 157 | Providing and fixing health faucet with 1.2 m ss braided hose pipe and swivel hook including all fittings completeincluding cutting and making good the wall wherever required complete with all parts and internal fittings of approved make with ISI mark and supplying of necessary brackets, screws etc as per PH specification all complete as per direction of Engineer-in-charge. (MakeJaquar ALD 573/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 158 | Supplying all materials, labour, T&P and fixing Flat back standing urinal with speader of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge.(MakeJaquar/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 159 | Providing all materials, labour,T&P and fittings and fixing of urinal valve of approved make etc complete including cutting the wall and making good the damages, including cost of all materials complete as per PH specification and direction of Engineering-in-charge. (Make:Jaquare/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 160 | Supplying all materials, labour, T&P for fitting & fixing 110mm dia PVC double junction with doorincluding supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make:- Oriplast / Hariplast/ Supreme) |
| 161 | Supplying all materials, labour, T&P for fitting & fixing 110mm dia PVC single junction with doorincluding supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make:- Oriplast / Hariplast/ Supreme) |
| 162 | Supplying all materials, labour, T&P for fitting & fixing and laying 75 mm dia PVC Door bend ofincluding supply of all jointing materials like gaskets, adhesive, solvent cementetc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC.(Make:ORIPLAST/ Hariplast / Supreme) |
| 163 | Supplying all materials, labour, T&P for fitting & fixing and laying 75 mm dia PVC Teeofincluding supply of all jointing materials like gaskets, adhesive ,solvent cement etc. and fixing to walls with supply of wooden plugs and nails, bobbins, clamps including scaffolding, testing etc. as per direction of EIC. (Make:ORIPLAST/ Hariplast / Supreme) |
| 164 | Supplying all materials, labour, T&P and fixing standard sizedChromium PlatedShower with shower arm complete with Chromium Plated brassbrackets fixed to wooden plugs with Chromium Plated brassscrews as per specification and direction of the Engineer in charge.(Make:Jaquar/Kohler/Cera/Tota/Roca/Parryware/Grohe) |
| 165 | Supplying all materials, labour, T&P and fixing standard sized 600 mm Towel Rack ofcomplete with all as per specification and direction of the Engineer in charge. jaquar-ACN-1181FS /Kohler/Cera/Tota/Roca/Parryware/Grohe |
| 166 | Supplying, fixing and testing PVC Nahani trap with SS frame and cover 90mm dia outlet fixed on a bed of cement concrete with (Heavy duty type) etc., complete 90 mm dia |
| 167 | Providing and fixing cupboard with 1mm thick laminates(all visible sides), 19mm ply in front and sides and shelves , 6mm ply on back including SS hinges , depth 16inches, Handle and Tower Bolt along with brass special quality bright finished brass cupboard or wardrobe locks with four levers of approved quality including necessary screws etc. complete as per design approved by Engineer-in-Charg. in all floor |
| 168 | Supplying and filling of 50 mm size brick aggregate including cost of all materials, labour, T& P required to complete the work as per direction of EIC |
| 169 | Supplying all materials, labour, T & P and making MS step iron by using 16mm diameter MS steel bars and fixing into walls of man hole/ septic tank etc complete as per specification and direction of EIC. |
| 170 | Electrical works |
| 171 | Supply & Recessed wiring to light point / first light of group control/ call bell point/ exhaust fan point /wall fan point with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked in 20 mm dia non-metalic PVCconduit with 6 Amp, 250 V clip in type Modular switch ISI marked and ceiling rose ISI marked mounted on G.I modular box with face plate & cover of suitable size ,with 1.5 sq.mm FRLSH PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge.Average length: 5 Mtr |
| 172 | Supply & Recessed wiring to secondary light pointlooped from primary light point with 1.5 Sq mm FRLSH PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVCconduitwith 1.5 Sq mm FRLSH PVC insulated single core multistrand copper conductor for running earth including3 plate ISI marked Ceiling rose with all accessories & connection as per direction of Engineer in charge. Average Length: 3Mtr |
| 173 | Supply & Recessed wiringwith 5 / 6 Amp Modular socket outletwith6Amp, 250 V clip in type modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable size on existing boardincluding all accesories and connection on same switch board as per direction of Engineer in Charge. |
| 174 | Supply & Recessed wiringfor2 x 6 Amp Modular socket outlet controlled by 2 nos6Amp, 250 V clip in type Modular switch ISI markedmounted on single G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection on separate board as per direction of Engineer in Charge. |
| 175 | Supply & Recessed wiringfor 6 pin 16 Amp Modular socket outletwith 16Amp, 250 V clip in type Modular switch ISI markedmounted on G.I moular box with face plate & cover of suitable sizeincluding all accesories and connection as per direction of Engineer in Charge. |
| 176 | Supply & Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge. |
| 177 | Supply & Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge. |
| 178 | Supply & Recessed wiring to submain in 4 x 6sq.mmFR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 40 mm dia non-metalic heavy duty PVC conduit 1.6 mm thick along with 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required including all accesories and connection as per direction of Engineer in Charge. |
| 179 | Supply and fixingof 12 waySPN Glazed double doorhorizontal type MCB distribution board, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. Incoming:-40 Amp 4 Pole, B-Series MCB-1 No. Outgoing:- 6-32 Amp SP, B-Series MCB-8 Nos as required including all accesories and connection as per direction of Engineer in Charge. |
| 180 | Supply and fixingof 6 waySPN Glazed double doorhorizontal type MCB distribution board, 415 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic cover for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. with Incoming:- 32 Amp 4 Pole, B-Series MCB-1 No. Outgoing:- 6-32 Amp SP, B-Series MCB-2 Nos as required including all accesories and connection as per direction of Engineer in Charge. |
| 181 | Supply,Installation, Testing and Commissioning of Recess mounted indoor type 18W ROUND LED Luminaire with LED Lamp Similar to Havells Cat No. LHEAABP6IN1W018 with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC |
| 182 | Supply,Installation, Testing and Commissioning of 6 Amp angle holder with 9W LED bulb with all accessories and lamp etc. directly on wall,including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 183 | Supply and fixing of 10W bulk head fitting with enclosure including all accessories, cost of labour, T&P etc complete the work as perDirection of Engineer-In-Charge. |
| 184 | Supply,Installation, Testing and Commissioning of Recess mounted indoor type 36W 2"x2" Square LED Luminaire with LED Lamp with all accessories and lamp etc. directly on ceiling /wall or recessed in false ceiling , including connection with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor and earthing as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC |
| 185 | Supply , fixing& termination ofIP65 90Watt OutdoorStreet Light LEDLuminaire fittings with GI bend pipe, accessories to hold the GI bend pipeincluding all accessories, cost of labour, T&P etc complete the work as perDirection of Engineer-In-Charge. |
| 186 | Supply and fixing of 7.5 watt Screw type LED fillament based bed lamp with enclosure including all accessories, cost of labour, T&P etc complete the work as perDirection of Engineer-In-Charge. |
| 187 | Supply, Installation, Testing and Commissioning of BLDC ceiling fan 1200mm sweep with remote controller, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 188 | Supply, Installation, Testing and Commissioning of 300 mm dia 900 RPM Heavy Duty Metalic Exhaust Fan with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 189 | Supply, Installation, Testing and Commissioning of 450mm dia 1400 RPM Industrial Type metalic Exhaust Fan with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 190 | S/f of 5 star rated wall fan Supply, Installation, Testing and Commissioning of 5 star rated wall fan 400mm sweep, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq.mm FR PVC insulated single core multiatrand copper conductor etc. as required including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 191 | Supply and fixing of chemical Earthing of with 3mtr long40mm dia chemical filled comound and GI earth electrodeincluding excavation of earth pit with highly conductive back filled chemical compund of 2 x25kg , brick work in cement mortar masonary workwith removable cover for Earth pit chamber ofsuitable size including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 192 | Supply and Fixing of spike copper Lightning arrester of 9mm dia 912mm long solid including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 193 | Supply and laying of 6 SWG GI loop earth wire in PVC conduit including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 194 | Supply and Laying of 25x3 mm GI Earthing Strip including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 195 | Supply and fixing of 5kg dry powder typefire extinguisher including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 196 | Supply and laying of3.5core 70 sq mm XLPE Armoured Aluminum Cables intrench & laying with sand, protective covering including all accessories, labour cost, T&P etc complete work as per Direction of EIC. |
| 197 | Supplying and making end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed / XLPE aluminum cable of 1.1 KV as required. 3.5 core x 70 sqmm A2XFY.(2 Run for each feeder) |
| 198 | Supply, installation,testing & commissioning of floor mounting front operated front access extensible type cubicle panel (Double Door, Outdoor Type) totally enclosed, dust and vermin proof with IP-65 protection with hinged and lockabale doors.CRCA sheets including Busbars,interconnections,tinned copper crimping lugs, bonding to earth and painting suitable for use at 415 V, 3phase 4 wire 50 Hz system, and to withstand a fault level of 35KA symmetrical for 1 sec at 415 V complete as per specifications, as required and as below : All switchboards shall have provision for entry of cables from the bottom as required. All live accessible parts shall be shrouded and all equipment shall be finger touch proof. The bus bars shall be insulated with heat shrinkable sleeves.SMC/DMC shrouds and busbar supports shall be used MAIN PANEL with INCOMER:- 200A 4P Onload Change Over Switch-1 No., 200A 4P MCCB (50kA)- 1 No, 50kA Type-I+II 3P+N SPD-1 No. 100Amp 4P HRC Fuse set with Fuse-1 Set OUTGOING:- 125A 4P MCCB (50kA) - 1 Nos, 63A 4P MCCB(25kA) - 4 Nos, 32A 4P MCCB(25kA)- 2 Nos, 16A DP MCCB- 2 Nos. and 3nos 250/5A CT, 1 No 0-200A Digital Ammeter, Digital Voltmeter, R-Y-B Indicating Lamp and 250 A aluminium Bus Bars including all accessories, cost of labour, T&P etc complete the work as perDirection of Engineer-In-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
