Military Engineer Services-MES has published Tender For Repair To Roof Treatment And Allied Pre Monsoon Maintenance Including Structural Repair And Other Repairs To Distress Concrete To Certain Building At Zone A And B Under Age Br Ii In Ge Gomantak Vasco. Submission Date for this Tender is 19-04-2024. Shed Construction Tenders in vasco Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 08-Apr-2024 | amendment1 | BOQ | 19-04-2024 |
| Sl. No. | Item Description |
| 1 | Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., complete all as specified and as directed. |
| 2 | Material and labour for rendering 10 mm thick on brick or concrete surfaces in CM 1:6 finished fair and even complete all as specified and directed. |
| 3 | M&L for applying one coat of alkali resistant primer on plasteredsurfaces over 3 mm thick Birla white wall care putty and applying two coat of oil bound distemper including preparation the surfaces complete all as specified and directed. |
| 4 | M&L for rendering 15 mm thick on brick work or concrete surfaces in cement mortar 1:4 including liquid WPC @ 200 ml per bag of cement finished even and smooth without using extra cement complete all as specified and directed. (Rate of Water proofing compound shall deemed to be included under this item). |
| 5 | M&L for roof and wall treatment by applying two coat of PU & Acrylic based Elostomeric Coat in UV shade having OVOC coating over a coat of primer on roof/chajja projections and external walls complete all as specified & directed. |
| 6 | Providing and applying 20 mm thick ready mix external sand faced cement plaster with neat cement rendering at all locations in two coats on masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete all as specified & directed. Make : Asian paint/ ACC/ JK Cement |
| 7 | Apply a coat of SmartCare Primero with dilution ratio of 1:1 with water maintain a coverage of 100 sq.ft/ltr complete all as specified & directed. |
| 8 | M&L for preperation of new surface wall/ceilling by scrapping/rubbing,applying two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion with silicon additives,over a coat of fibre reinforced elastomeric liquid water proofing membrane (Asian paint damp proof+ultima suprema,exterior anti fungal paint or equivalent) , on new plastered surfaces walls/ceilling and cornires brooming down or steel wire brushing scrapping down with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory wall care putty of Birla wall care or equivalent wherever required complete all as manufacturers instructions. (Manufatured by : Asian paints damp proof + Ultima suprma or Equivalents Make). NoteThe Application of paint to be done by the authorised applicators of asian paint or eqlt make and contractor shall submit a written gurantee with the authorized dealer of 8 years for any type of colour fading,peeling,flaking,growth of fungus,seepage of water through the paint applied area or any other damages to the paint). Also the dealer shall appoint a person to inspect and validate the application of the system in stage wise manner. |
| 9 | Chipping off existing loose, damaged concrete from RCC members of all affected RCC Columns, beams, slabs and chajjas on external and internal facades etc beyond main r/f.(if required in the opinion of the consultant), carefully with chisel and hammer including relieving structural members such as column, beam and slabs of their superimposed load partially or fully by provision of adjustable steel props, frames etc. Providing and applying "Rusticide SS" Rust passivator or equivalent as specified in the Brand names to existing r/f bars including wire brushing of r/f, cleaning, washing of concrete etc complete as directed. Providing and applying two coats of rust preventor slurry made out of "Polyalk Fixoprime" or equivalent as specified in the brand names and cement in proportion 1:1.5 to exising r/f bars as directed complete. Providing and applying bonding coat of slurry made out of "Polyalk EP" or equivalent as specified in the brand names and cement in proportion 1:1 to concrete and r/f substrates complete as directed. Providing and applying "Polyalk EP" or equivalent as specified in the brand names. Polymer modified cement mortar in required porportion (1:5:15) to RCC members including hand packing, curing and making the surface rough for plastering complete all as specified and directed. |
| 10 | M&L 5 mm thick rendering in cement mortar 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for applying 3 mm thickputty on ceilling surfaces and applying two coat of oil bond distemper including preparation the surfaces complete all as specified and directed. |
| 12 | M&L for preperation of old surface wall/ceilling by scrapping/rubbing,applying,two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion with silicon additives,over a coat of fibre reinforced elastomeric liquid water proofing membrane (Asian paint damp proof+ultima suprema,exterior anti fungal paint or equivalent), on plastered surfaces walls/ceilling and cornires brooming down or steel wire brushing scrapping down with steel scrapper smoke soot moulds moss and efflorescent slats brading oil and greasy spots etc and making proper surface by applying ready mix preparatory wall care putty of Birla wall care or equivalent wherever required complete all as manufacturers instructions. (Manufatured by : Asian paints damp proof + Ultima suprma or Equivalents MAke). NoteThe Application of paint to be done by the authorised applicators of asian paint or eqlt make and contractor shall submit a written gurantee with the authorized dealer of 8 years for any type of colour fading,peeling,flaking,growth of fungus,seepage of water through the paint applied area or any other damages to the paint). Also the dealer shall appoint a person to inspect and validate the application of the system in stage wise manner. |
| 13 | M/L for Replacement of steel reinforcement with TMT bars of appropriate size where 20% of cross section is reduced including dismantling of rusted steel including application of rust converter FEOVERT and applying protective coating IPNET-RB complete all as specified and directed. |
| 14 | Providing and laying Super fluid microconcrete-Roffe crete repairs(or equivalent as specified in the list of brand names) in beam bottoms, columns, slabs etc. including mixing with 5mm to 10mm size aggregates, water proof plywood/steel plate shuttering, pouring, tamping, consolidating, curing etc complete as per manufacturer"s specification and consultant"s instructions. The item shall be paid on actual consumption of microconcrete. |
| 15 | M/L Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, column ,cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 16 | M&L for applying two coats of Anti fungal paint-APEX wting over a coat of primerto match the existing colour including preparation of newly plastered surface of wall. complete all as specified and directed. |
| 17 | Material and labour for one coat of oil bound distemper on wall including preparation of old plastered surfaces complete all as specified and directed. |
| 18 | Material and labour for one coat of oil bound distemper including preparation of old plastered surfaces on ceilling surfaces, complete all as specified and directed. |
| 19 | Complete removal of existance treatment of wall andapplying a layer of 3mm thickwall care putty in two coat on wall and applying two coat of oil bond distemper complete all as specified and directed |
| 20 | Complete removal of existance treatment of ceiling andapplying a layer of 3mm thickputty in two coat on ceilling surfaces and applying two coat of oil bond distember complete all as specified and directed |
| 21 | Material and labour preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in-Charge. |
| 22 | Material and labour preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as directed by Engr-in-Charge. |
| 23 | M&L for applying one coats of exterior emulsion paint (Apex or weather coat), white or tinted on old surfaces of wallsincluding prepration of surfaces complete all as specified and directed. Note for item No. 3, 5, 8, 11, 12, 16 to 23 : Rate quoted by contractor shall include washing floors, removing all spots, cleaning glass, joinery, electrical fittings, wiring etc. completeall as directed at site. |
| 24 | Dismantling floor, hearth or wall tilingalso in patches including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 25 | M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match colour of tiles over and including 15 mm thick screeding in CM 1:4 complete all as specified ( screed bed shall not be measured and paid separately). |
| 26 | M&L glazed ceramic white tiles 300 x 200 x 6 to7 mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick rendering in cement mortar 1:3 complete all as specified and directed. |
| 27 | M&L Vitrified Ceramic tiles 9 to 10 mm thick dark shade, square/ rectangular polished, area of each tiles not exceeding 0.36 sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM1:4 complete all as specified and directed. |
| 28 | M&L for Bitumen blown any grade, applied hot, one coat, to concrete surfaces at the rate of 1.5 kg. per Sqm per coat complete all as specified and directed. |
| 29 | M&L for laying of Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 Ltr/per sqm. complete all as specified and directed. |
| 30 | M&L PCC Cement concrete type D2 (1:4:8) 40mm graded in filling in sunken floor and mass concrete including demolition of existing PCC in sunken floor complete all as specified and directed. |
| 31 | S&F in repair Vitreous china, white,Squatting pan ,"Orrisa" pattern size 580 x 440 mm with integral foot rest water closet), front or back inlet complete, connection to drain pipe and to flushing pipe, antisyphonage pipe etc. complete including making good to floor to match with the exisitng complete all as specified and directed. |
| 32 | S&F in repair PVC seat cover colour or white closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hanging devices,colour match with Existing EWC seat complete all as specified and directed. |
| 33 | S&F in repair 10 Ltrs capacity, PVC valveless, syphonic action type, low level flushing cistern moulded from virgin poly propylene, white, with inlet, ball valve, float and handle complete with all internal accessories and fixed to wall, PVC flush pipe 32 mm dia 90 cm long fixed properly to inlet of WC complete all as specified and directed |
| 34 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 35 | S&F in repair vitreous china wash basin (WHB), white, flat back, size 550mmx400mmincluding CI cantilever brackets, 32 mm diabrass Chromium plated waste fittingswith long screw shanks and fly nuts, flange end embedded in red lead cement, including cutting for and pinning in ends of brackets or erecting stand complete all as specified and directed. |
| 36 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern),white (excluding flushing cistern and flush pipe) complete all as specified and directed. |
| 37 | S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copperalloy, with capstan heads, chromium plated, screwed down for 15 mm bore pipe, high pressure with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 38 | S&F in repair 15 mm nominal bore Chromium plated, fancy type, Stop valves / angle valve screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 39 | S&F in repair two way Angle/stop cock, 15 mm nominal bore Chromium plated, screwed down, high pressure, with crutch handle, screwed externally both ends for unions etc. and fixed complete all as specified and directed. |
| 40 | S&F in repair 15 mm nominal bore Bib taps, long body fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 41 | S&F in repair 15mm bore pillar taps, long nose fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 42 | S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15 mm dia pipe superior quality with minimum 1 m long flexible pipe and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 43 | S&F in repair brass chromium plated shower rose 125 mm dia with or without swival joints, with CP long shank including fixing to 15 mm dia pipe or union all as specified. |
| 44 | S&F in repair Towel rail of brass chromium plated 900 mm longwith and including chromium plated brass screws wooden / plasticcleatscomplete all as specified and directed. |
| 45 | S&F in repair toilet paper holder, superior quality, fancy type, brass chromium platedwith wall hook bracket complete all as specified and directed. |
| 46 | Material &Labourfor Cutting chases, pinning in. making good to facings where equired and pointing in cement mortar 1:3 to ends or edgesand cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 47 | S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed. |
| 48 | S&F in repair grating doom 100 mm dia of stainless steel (min wt 25gms) complete all as specified and directed. |
| 49 | S&F in repair 600mm x 450mm edge less mirror 5.5mm thick of selected quality glass, mounted on 6 mm thick or AC building board or commercial plywood and fixed to wooden plugs with CP Brass screws and cup washers complete all as specified. |
| 50 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 51 | M&L for fixing woven fibre glass mesh min 40 GSM of size 2 mm x 2mm fixed on APP membrane and providing cement concrete tiles 20cm x 20cm x 20mm thick, with grey cement and pigment set, jointed and pointed in neat cement slurry laid over 15 mm thick screed in CM 1:4 complete all as specified and directed. |
| 52 | Taking down existing treatment along with PCC padding of any thickness and roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete. |
| 53 | Filling and reinstating of separation cracks: Opening the separation cracks at the junction of RCC and masonry where ever directed and instructed into "V" Grooves 2 to 3" from either side of the cracks by carefully marking areas to be opened up using a cutting machine and skillfully/carefully chiseling with a well sharpened chisel and hammer as directed including wire brushing and washing of concrete substrata and masonry walls with water jet to the surfaces thus prepared to the entire satisfaction of the consultant as instructed and directed. Moistening the cracks, provinding and applyin priming/bonding coat of slurry made out of "Polyalk EP" and cement (or equivalent as specified in the list of brand names) in proporiton 1:1 to surfaces prepared as instructed and directed. Filling the cracks/grooves by providing and applying "Polyalk EP" Polymer modified cement mortar (or equivalent as specified in the list of brand names) in proporiton 1:5:15 (Polyalk EP: Cement: Graded Sand/Quartz Sand) on the prepared surfaces and finishing it in the level with the existing plaster including hand packing, curing and making the surface similar to the external plastering using wooden floats/punch etc. complete all as specified and directed. |
| 54 | M&L for Drilling holes of required sizes upto 16 mm dia and up to 50 mm depth in concrete and cleaning, Provinding and fixing 12 mm dia Aluminium/PVC injection nipples and securing the same and Providing and injeciting cementitious grout using CEBEX-112 additive of "FOSROC" at the rate of 225 grams per bag of cement and using suitable mechanical gun/pump including mixing etc complete all as specified and directed.. |
| 55 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) mixed with and including integral waterproofing chemical PIDIPROOF LW mixed @ 200 millilitre per 50 Kg cement of DR FIXIT of PIDILTE INDUSTRIES LTD or STP No. 1 (LIQUID)as in padding on roof surface for correcting / making proper slope on roof, surface finished fair and even without using extra cement complete all as specified and directed. |
| 56 | M&L for rendering 10 mm thick on brick or concrete surfaces in CM 1:4 finished fair and even including mixed with liquid water proofing compound (as per manufacturers instructions)on concrete surfaces complete all as directed. Note : Water proofing compound shall measured and paid separately |
| 57 | Suppy only liquid water proofingCompound all as specified and directed. |
| 58 | M&L for laying water proofing treatment using 4mm thick APP modified membrane consisting fiver layers membrances with features as specified weighing not less than 3.5 kg per sqm reinforced with non woven polyester fiber @ 160gm/Sqm laid over a coat of cold applied bituminous primer @ 0.40 kg/sqm by torching the membrance and sealing the over lap by 100mm length side and 150mm width side all as per manufacturer instructions including joints and changes in direction be curved with cement mortar 1:3 mixed with SBR latex @ 200 ml/bag of cement curved well before laying membrance, all as per manufacturer instructions and to the satisfaction of Engr-in-Charge. Note: (i) Irrespective of lap the net covered area will only be measured for payment. (ii) Rate is inclusive of APP membrane, SBR Latex (iii)Applying a coat of bituminius aluminium paint @200 gm /sqm (minimum ) in two coat . |
| 59 | M&L for cleaning of bushes/plants/vegetations on walls/roof/chajjas/ceilings and removing/digging out the roots filling the hole and including applying antigrowth chemical and making good surfaces with cement concrete type, B1, 1:3:6, using 20 mm graded stone aggregate all as directed. Note :- Each Bush/Plant more than 12 inch height removed shall be measured as one unit |
| 60 | S&F in repair Glass shelf with CP railing (22 x 6") complete all as directed. Make:- Nixo-Cat part no- ES01A/Hilife/Cera/Prayag |
| 61 | S&F in repair, Glass corner shelf with CP railing(12" x 12") complete all as directed. Make-Nixo-Cat no-ES03A/Hilife/Cera/Prayag |
| 62 | Disconnecting existing tanks exc 250 & n exc 500 capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as directed |
| 63 | Disconnecting existing tanksexc 500 & n exc 1000 capacity, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as directed. |
| 64 | Dismantling of PVC existing water tank of exc 500 ltrs & n. exc 1000 ltr capacityincluding taking down from roof/staging and removing from site complete all as specified and directed. |
| 65 | Dismantling PVC water tanksExc 250 ltrs but not 500 ltrs for the following size including taking down from roof/staging and removing from site complete all as specified and directed. |
| 66 | S&F1000 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 complete all as specified and directed. |
| 67 | S&F500 Ltrs capacity rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991complete all as specified and directed. |
| 68 | Taking up or down 20 mm dia steel tubing and connection and removal from site complete all as specified and directed |
| 69 | Taking up or down 25 mm dia steel tubing and connection and removal from site complete all as specified and directed |
| 70 | Refixing old 20mm dia steel tubing in walls, ceilling, floors etc.and connection in new or old positionsincluding new or old fittings and cleaning of old pipe (walls, ceilling, floors etc.) |
| 71 | Refixing old 25 mm dia steel tubing in walls, ceilling, floors etc.and connection in new or old positionsincluding new or old fittings and cleaning of old pipe (walls, ceilling, floors etc.) |
| 72 | Supply, fixing, laying & testing CPVC pipes 20 mm SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 73 | Supply, fixing, laying & testing CPVC pipes 25 mm SDR 11 including Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed |
| 74 | S&F in repair Ball brass valves 20 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 75 | S&F in repair Ball brass valves 25 mm dia, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and directed. |
| 76 | S&Fin repair PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to walls or in floors in clean or foul condition including clamps complete all as specified and directed. |
| 77 | S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive laid in trenches or in floors including necessary earthwork and demolition of PCC haunching etc. complete all as specified and directed. |
| 78 | S&F PVC (SWR) bends any radius 75 mm dia complete all as specified and directed. |
| 79 | S&F PVC (SWR) bends any radius 110 mm complete all as specified and directed. |
| 80 | S&F in repair PVC Tank covers of 500/ 1000 ltr with PVC nuts & bolts and rounded autolock ISI Mark complete all as specified and directed. |
| 81 | M&L for preparation of new steel and iron surfaces of any description, over 10 Cm in width or girth, not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide premier complete all as specified & directed. |
| 82 | Taking down Chowkhats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 sqm each including making good the wall surface complete all as specified and directed. |
| 83 | S&F PVC Solid mouldedDoor Frame of Size 50 x 47 mm & more made out ofmininum 5.0 mm thick Coloured with Plastic Trim decoratedPVC Sheet Reinforced with Mild Steel Square Tube complete all as specified and as directed. |
| 84 | S&F Factory Made PVC Solid mouldedDoor Shutter 30mm thick (Style) consisting of frame made out of Mild Steel Tubes for Top and Bottom Rails, Mild Steel Frame shall becovered with heat moulded Plain Colour PVC "C" Channel having a PVC Sheet Strip of 20 mm width stuck inside with Solvent Cement for Stiles and Plain Colour PVC Sheet for Top Rail, Lock Rail and Bottom Rail on either Side and as Gap insert for Top Rails & Bottom Rail, Panelling of Plain Colour PVC Sheet to be fitted in the Mild Steel Frame welded/sealed to the Stiles and Rails with suitable PVC Sheet Beading and Joined together with Solvent Cement and fixing in the Frame at Site complete all as specified and as directed. |
| 85 | Taking down Chowkhats or framesexc. 1.50 Sqm and n.exc 4.00 Sqm each with shutters (without taking off shutters from the frames) and including making good the wall surfaces complete all as directed. |
| 86 | Taking down shutters of any description exc. 1 Sqm and n exc 2 Sqm each complete all as directed. |
| 87 | S&F second class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 88 | S&F 2nd class HW35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 89 | M&L for 2nd class hard wood Kiln seasoned and chemically pressure treated glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 90 | S&Faluminium anodised wire mesh of size 1.5 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters rate including removal of wiremesh, aluminium grills/ aluminium window shutters wherever required and refixing them in position after fixing of wiremesh complete all as specified and directed. |
| 91 | S&Faluminium anodised wire mesh of size 1.5 mm x 3 mm mesh, 20 Gauge thick in doors/window shutters complete all as specified and directed. |
| 92 | S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked) complete all as specified and directed. |
| 93 | S&F butt hinges medium weight cold rolled mild steel 100 mm long (ISI marked) complete all as specified and directed. |
| 94 | S&F 150 mm long Aluminium handles, cast type (ISI marked) complete all as specified and directed. |
| 95 | S&F250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed. |
| 96 | M&L plain cement concrete 1:3:6 type C-1 using 20mm graded stone aggregate as in filling in hold fast and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed. |
| 97 | M&L mild steel work as hold fasts and similar small articles conforming to Fe-290, Gde E-165 complete all as specified and directed. |
| 98 | M&L for preparation ofnew or previously untreated surfaces of wood or wood based materials of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 99 | Dismantling reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 100 | Dismantling of structural steel work complete all as specified and directed. |
| 101 | S&F rolled mild steel in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde. 290E) quality-B complete all as specified and directed. |
| 102 | Dismantling Plain or Corrugated Steel Sheeting of any gauge or similar pattern Roof Coverings complete all asspecified and directed. |
| 103 | S&F Pre-painted galvalume (hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon, AZ 150 gm/sqm both side), Zincalume (steel) based corrugated sheet 0.50 mm thick, of an approved colour, having tensile strength of 550 Mpa and finished with resin coat on both surfaces as in roof covering/ cladding to wall, including flashings, ridges, valley etc fixed with self tapping screws complete all as specified. |
| 104 | Removing building materials by truck or tractor with using of if necessary JCB machine and trolly load min 3.00 Cum each load for upto 3 to 5 km including loading, unloading and stacking at the destination and depositing out side defence land complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
