Military Engineer Services-MES has published Tender For Additional/Alternator Of Building No P-889 And Provision Of Grease Trap In Dsc Mess At Af Stn Naliya. Submission Date for this Tender is 13-04-2024. Building Work Tenders in naliya Gujarat. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 06-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 13-04-2024 |
| Sl. No. | Item Description |
| 1 | M & L for Precast Cement Concrete block masonry with solid blocks of plain cement concrete 1:3:6 type C1 using 20 mm graded aggregate exc 10 cm in width and setting in CM 1:6 all as specified and as directed |
| 2 | Taking down of cement plaster from surfaces of wallof any description including raking out joints, hacking out for key, scrubbing down with water etc including complete treatment if any all as specified and as directed |
| 3 | M&L for rendering 10mm thickcement plaster on concrete surfaces of walls in CM 1:6 , finished the surface even and smooth wihout using extra cement etc complete all as specified and directed |
| 4 | M&L for rendering 15mm thick in two coat (10+5mm) cement plaster on concrete surfaces in CM 1:6 in base coatand2nd coat 5mm thick in CM 1:4 usingwater profing compund (3% by weight) complete all as directed. Note: WPC shall be measured and paid separately under relevant item of BOQ |
| 5 | Supply only integral water proofing compound all as specified and directed. |
| 6 | M&L preparation of new plasteredsurfaces of walls, and applying two coats of oil bound distemperover a coat of primer complete all as speified and as directed. |
| 7 | M &L for preparation of new plastered surfaces of walls andapplying two coats of exterioremulsion paint over a coat of primer in camoflage pattern etc complete all as per specified and directed |
| 8 | M&L for stone aggregate hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 9 | M&L for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base flooring all as specified and directed |
| 10 | M & L for 75 mm thick Cement concrete type B1, 1:2:4 (20mm graded aggregate) finished even and smooth using extra cement complete all as specified and as directed. |
| 11 | M & L for 75 mm thick Cement concrete type B1, 1:2:4 (20mm graded aggregate) all as specified and as directed. |
| 12 | M & L for vitrified ceramic tiles 10 mm thick (square/rectangular) polished , area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm in floor etc. in white or coloured cement to match including 25 mm thick PCC 1:2:4 type B-0 (12.5 mm graded stone aggregate ) in floor ,set and jointed in neat cement slurry and pointed in white or coloured cement to match jointed in neat cement slurry and pointed in white /coloured cement over 10 mm thick screedbed in CM 1:4 all as specified and as directed |
| 13 | S & F in repairs, 10 ltr capacity PVC valve less syphonic action type, flushing cistern, low level, white with inlet ball valve, flush pipe float and handle including brackets complete all as specified and directed |
| 14 | Demolition of cement concrete (unreinforced) for old water proofing treatment of any description and in any position not otherwise specifically provided for any thickness above ground floor including removing debris out side MD land complete all as specified and directed |
| 15 | M&L complete removal of existing water proofing treatment from top of roof and canopies/ chajjas of buildings including taking down plaster, removing the debris outside of MD land, roughening the old concrete roof/ floor by picking sweeping clean and washing down with water to removing dust etc., brushing neat cement slurry with 3.0 kg of cement per sq meter and rendering 10mm thick cement plaster in CM 1:3 on roof slab/canopies/ chajjas with water proofing compound @ 3 % of weight of cement and making plastered surfaces to receive water proofing treatmentfinished fair and evenand preparing, clean and dry plastered roof surfaces and applying APP modified water proofing membrane with mineral finish, non woven polyster reinforcement/mat not less than 3mm thick having weight not less than 3kg/Sqm with overlapping of 10cm at joints over a coat of bitumenous filler/ primer conforming to IS 3384-1986 and applying @ 250gm/ Sqm through approved applicator and applying all as per manufacturers instructions complete all as specified and as directed.complete all as specified and directed. Note: 1. The quoted rate is inclusive of removing earthstrip/cables and refixing the same after execution of water proofing membrane work. No claim what so ever shall be entertained on this issue in later stage. 2. Water proofing compound shall be measured and paid for seperately as supply only. 3. The quoted rates shall be inclusive of overlape. |
| 16 | M&L for 40 mm thick (average thickness) PCC (1:2:4), type B1, using 20mm graded stone aggregate as levelling course laid to slope as required, finished even & fair without using extra cement. complete all as specified and directed |
| 17 | M&L for preparation of old decorated/painted surfaces of walls and applying two coats of plastic emulsion paintcomplete all as specified and directed |
| 18 | S&F in position anodised aluminium powder coated (minimum 50 micron thickness) sliding door shutter with frame, partly glazed with 5.5mm thick tinted glass and partly panelled with 9 mm thick both side decorative prelaminated particle board exterior grade including rubber bead, joining cleat for fixing, aluminium door handle 150mm size and tower bolt 200mm size, double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing brass pivot, mortice lock vertical type of mild steel 4 levers of size 100mm etc as mentioned here in below complete all as specified and as directed:- (a) Frame (top and side) section - 101.60 x 44.75 x 2.4mm (Section No. 14021) (b) Vertical members of shutter Section-85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section - 83.50 x 44.45 x 2.00mm (Section No 19581) (d) Lock rail (middle member) of shutter Section - 150.00 x 44.45 x 3.00 mm (Section No. 19596) (e) Bottom Members of shutter Section - 150.00 x 44.45 x 3.10mm(Section No. 19584) (f) Glazing clip for securing glass - 0.80 mm thick (Section No. 19370). Note:- Section No. given above are of make Jindal, Contractor may use similar section of other make mention in Appx A. Make:- Make of aluminium section : Jindal/ INDAL/ Hindalco as approved by GE |
| 19 | M&L for preparation of old painted wooden surfaces of any description, over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed |
| 20 | S&F for steel work Fe-410-W(Gde E-250) quality in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc all as specified and directed |
| 21 | S&F for Mild steel screw bolts (machine made) length of bolt exc 22.5cm and n exc 30cm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long all as specified and directed |
| 22 | S&F for pre-prainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fix with self tapping screws all as specified and as directed |
| 23 | S&F in repair for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers fixed in repair complete all as specified and directed. |
| 24 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed. |
| 25 | S&F in repair 15 mm dia CP pillar cock complete all as specified and directed |
| 26 | S&F in repair vitreous china wash basin white, flat back, size 550 x 400 mm including 15mm dia fancy type CP pillar tap, 32mm dia flexible waste pipe and fixing with brackets complete all as specified and directed |
| 27 | S&F in repairs PVC waste pipe flexible 32mm or 40mm bore 60cm long for sink or WHB complete all as specified and directed. |
| 28 | S&F in repairs 15 mm dia chromium plated bib cock with flange complete all as specified and directed |
| 29 | S&Fin repairs 15mm bore chromium plated stop cock/angle cockStop valves,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 30 | S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified |
| 31 | S&F in repair flush pipe 32 mm dia for low level flushing cistern fixed in repairs complete including refixing of cistern at its position complete all as specified and directed. |
| 32 | M&L for preparation old plastered or unplastered, surfaces of walls and applying two coats of white wash all as specified and directed |
| 33 | Demolition of brick work or stone/boulder masonary, built in CM including all quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified |
| 34 | Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 35 | M&L for point wiring with 1.5 sq mm FRLS single core PVC insulated unsheathed 1100 V grade with multistranded copper conductor drawn through PVC conduct with all accessories concealed in the wall/roofs etc and incl provision of 1.5 sq mm PVC insulated and unsheathed copper conductor as earth continuity conductor and connected to common earth dolly incl fabricated steel terminal box made out of 1.6 mm thick MS sheet concealed in the wall with 3 mm thick laminated sheet top cover for mounting the switches, socket outlets, fan regulators etc all as specified and directed for following. |
| 36 | One light/Fan point controlled by one switch. |
| 37 | One socket 3 pin outlet 5 amp on independent board. |
| 38 | One 3 pin socket outlet 5 amp on the same borad with otherswitches |
| 39 | All as per item No. 45 above but with copper conductor cable for one 3 pin socket outlet 15 amp independent board with cable 2.5sq mm and 2.5 sq mm copper cable as earth continuity conductor complete all as specified and directed |
| 40 | S & F switch piano flush type single pole one way 5 amp complete all as specified and directed |
| 41 | S&F ceiling rose three terminal/PVC polycarbonate, isolated body complete all as specified and as directed. |
| 42 | S&F switch socket combination 2 in 1,3 pin 5/15 amp flush type complete all as specified and directed |
| 43 | S&F switch socket combination 2 in 1,5 amp flush type complete all as specified and directed |
| 44 | S &F in replacement of socket outlet 2 in 1,3/5 pin 5 amp multi purpose, flush type complete all as specified and directed |
| 45 | Supply and fixing LED lights fitting 1x 18W, 220V AC decorative box type with driver, holder including LED tube light coonnecting up wirth three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed |
| 46 | S&F in replacement sub main wiring drawing through PVC conduit with two single core 4 sq mm and one run of 4 sq mm as earth wire of stranded copper conductor PVC insulated and unsheathed cable of 1100 volts grade complete all as specified and as directed. Note : One run of PVC conduit and three runs of cabe shall be measured as one unit. |
| 47 | S&F in replacement of MCB DB SPN 4 ways double door with 240 volt, 200 amps rated bus bar with all accessories fixed in the wall including taking old DBs any type and cap and making good and match with the existing surface of wall all as specified and directed. |
| 48 | S&F in replacement of MCB 6 to 40 amps single pole 240 volts, complete all as specified and directed. |
| 49 | M&L for earthing complete with galvanized GI earth plate electrode of size 600x600x6.00 mm, buried directly in ground (earth pit not less than 2.25 mtr below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth lead wire 4.0 mm dia by means of bolts, nuts, check nut and galvanized iron or steel including earth work in any type of soil, charcoal salt 15 cm around the earth plate as shown in electrical plate No 3 of SSR part1991,20 mm dia watering pipe medium grade 1.50 mtr long GI protection pipe light grade 15 mm dia from earth pit to main board (NOTE:- maximum length of GI protection pipe with each earth shall not be less than 7.5 mtrs) including necessary excavation, RFR, Removal with, providing RCC 1:2:4 type B1 with 40mm thick RCC cover with 6mm dia MS rods as in reinforcement at 150mm c/c both ways including testing on completion. |
| 50 | Demolition of cement concrete (unreinforced) in ground floors and pavings exc 15 cm in thickness (below or above ground level) complete all as specified and directed |
| 51 | M&L for 75mm thick cement concrete type B1, 1:2:4(20mm graded agg) and finishing cement concrete surface even and smooth using extra cement all as specified and as directed. |
| 52 | Supply & fixing of Oil and grease trap of length - 48", Width - 24", Height - 24" manufacturred with stainless steel material of grade SS 304, with provn of Inlet and Outlet size : as required and the volume - 450 litres complete all as specified and as directed. |
| 53 | Cutting into existing manholes for conncetion new drains 150 mm internal dia old pipe and making good to pipe and rendering benching for forming branch channel (1/2 Band to 3/4 section) in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate smooth finished and reforming benching as required complete all as specified and directed. |
| 54 | Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) set in cement mortar 150 mm internal dia of pipe, complete all as specified and directed. |
| 55 | Salt glazed stone ware (SGSW) grade "A" drain pipes 150mm internal dia laid in trenches on concrete bed and jointed, complete all as specified and as directed. Note: Excavation, earth work and concrete bed shall be measured and paid for separately under respective items under this BOQ. |
| 56 | M&L for concrete bed to drain pipes, including packing under and haunching against the sides of pipes after they are laid and tested in Plain Cement Concrete 1:3:6 type C-2 ( using 40mm graded stone aggregates ) for 150 mm bore of pipe complete all as specified and as directed. |
| 57 | M&L for 15mm thick plastering in cement mortar (1:4) of cement mixed with water proofing compound including finishing the surfaces even and smooth without using extra cement all as specified and directed. Note:WPC shall be measured and paid separately as per manufacturing instruction as supply only. |
| 58 | M&L for precast cement concrete block masonary walling with solid blocks of PCC (1:5:8) (20mm graded aggregates), exc 10cm in width and setting in CM (1:6) complete all as specified and as directed. |
| 59 | M&L for precast RCC 1:2:4 type B-I (using 20mm graded stone aggregate) as in man hole cover set in cement and sand mortar 1:4 as directed with necessary form work complete, all as specified and directed |
| 60 | M&L for TMT bars, 6 to 8 mm dai cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia all as specified and as directed. |
| 61 | S&F 110 mm dia bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed |
| 62 | S&F PVC 75mm dia (SWR) pipes single socketed, in any lenth with rubber ring joints, fixed to wall complete all as specified |
| 63 | S&F PVC (SWR) bend any radius for 110mm bore pipe incl jointing material complete all as specified and directed |
| 64 | S&F PVC (SWR) bend any radius for 75mm bore pipe incl jointing material complete all as specified and directed |
| 65 | S&F PVC (SWR) branch piece, single (single Y) equal or unequal for 110mm dia bore incl jointing material complete all as specified and directed |
| 66 | S&F PVC (SWR) junction single (single T) equal or unequal for 110mm dia bore complete all as specified and directed |
| 67 | S&F PVC (SWR) Junction, single (single T) equal or unequal for 75mm dia bore complete all as specified and directed |
| 68 | GENERAL NOTE: IF ANY SIMILAR ITEMS FOUND IN THE BOQ THE LOWE RATE OF THE SIMILAR ITEMS SHALL BE CONSIDERED FOR PAYMENT. NO CLAIM WHAT SO EVER SHALL BE ENTERTANED ON THIS ASPECT. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
