Military Engineer Services-MES has published Tender For Additional/Alternator To Certain Or Md Accommodation Of Inf Bn At Choudhary Line , Birpur Under Ge ( P ) Dehradun. Submission Date for this Tender is 22-04-2024. Building Work Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Apr-2024 | Amendment | Other | 22-04-2024 |
| 2 | 09-Apr-2024 | BOQ Amendment | BOQ | 22-04-2024 |
| 3 | 09-Apr-2024 | Date Amendment | Date | 22-04-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling asbestos cement (corrugated , semi corrugated, etc.) sheets in roof coverings.Complete all as specified and directed. |
| 2 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings.Complete all as specified and directed. |
| 3 | Dismantling timber scantling 40 sqcm & over in section uframed in any position. Complete all as specified and directed. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified. |
| 5 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc.Laid, bedded and pointed in any mortar complete as directed and specified. |
| 6 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed. |
| 7 | Demolition of brick work in cement mortar including all quoins, arches, pillars etc, but excluding ashler facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 8 | Taking down cement plaster of any description, thickness on brick, stone, concrete surfaces including racking out joints, hacking for key, scrubbing down with water, removal of rubbish and cleaning, etc complete as directed and specified. |
| 9 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. |
| 10 | Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed. |
| 11 | Taking down shutter of any description exc. 1.0 Sqm but n.exc 2.0 Sqm each and removing from site complete all as specified and directed. |
| 12 | Taking down shutter of any description exc 2.0 Sqm each and removing from site complete all as specified and directed. |
| 13 | Taking down shutter of any descriptionn.exc 1.00 Sqm each and refixing in same opening with easingand adjusting complete all as specified and directed. |
| 14 | Taking down shutter of any descriptionexc 1.00but bot exc 2.00 sqm each and refixing in same opening with easingand adjusting complete all as specified and directed. |
| 15 | Dismantling of cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories upto 100 mm dia jointed in cement mortar and taking out of walls, floors or trenches, if required complete all as specified and directed. |
| 16 | Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge |
| 17 | Taking up or down 15 mm steel tubing and connections complete all as specified and directed. |
| 18 | Taking up or down 20 mm steel tubing and connections complete all as specified and directed. |
| 19 | M&L PCCD 2, 1:4:8 75 mm th (40mm graded aggregate) in floorsub base |
| 20 | M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete ncl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6. Complete all as specified and directed. |
| 21 | M&L Machine Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete incl 10 mm thick rendering on brick surface in CM 1:4. |
| 22 | M & L for 25 mm thick PCC 1:2:4 type B-0, using 12.5 mm graded stone aggregate as in floors, to receive surface of tile complete all as specified and directed. |
| 23 | M & L for non-skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) of size 600 x 600 mm in floorsetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6,complete all as specified and directed. |
| 24 | M & L for non-skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular) of size 400 x 400 mm in floorsetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6,complete all as specified and directed. |
| 25 | M & L for non-skid coloured ceramic joint free tiles 7 to 8 mm thick (square/ rectangular)as in Skirting, riser etc (length of tiles not less than 600 mm) set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering in CM 1:4 complete all as specified and directed. |
| 26 | M&L Glazed ceramic tiles coloured 300mmx 450mm , 7 to 8 mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces of wall incl 10 mm thick rendering on brick surface in CM 1:4.complete all as specified and as directed. |
| 27 | M & L 18 to 20mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge. |
| 28 | M&L 75mm thick PCC 1:3:6 type C-2, (20 mm graded stone aggregate)as plinth protection and finishing even and smooth without using extra cement incl making joints 12mm wide of full depth of PCC at every 3 meters and at every change in direction and filling the same with sealing compund grade "A" incl necessary formwork. Complete all as specified and directed. |
| 29 | M&L forbrick work with old size bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed. |
| 30 | Ditto as per item No. 29, but except bricks. |
| 31 | M&L for 15mm thick rendering in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonaryfinishedeven and fair without using extra cement complete all as specified and directed. |
| 32 | M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM 1:4 finished even and fair. Complete all as specified and directed. |
| 33 | M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete to be finshed even and smooth without using extra cement over 10 mm thick in 1:4 as dubbing coat after applying one coat of alkaline anticorrosion chemical coating having specific gravity of 1.2 to 1.22 upon exposed reinforcement as per manufacturer instruction etc complete all as specified and as directed |
| 34 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof adding/staging of water tank etc including necessary fromwork, eathering, slightly rounded or chamfered angles and throating complete all as specified and as directed |
| 35 | M & L for water proofing treatment to RCCroof by APP based modified polymeric membrane (weight not less than 3.6 kg/sqm) as following step (a)The surface of roof,parapet and gutters,drain mouths etc over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,moss,dust etc by wire brushing and dusting.For cast iron drain outlets a grove shall be cut around to tuck in the treatment.Concrete angle fillets shall be provided at junctions between roofs and vertical faces of wall (parapet and other walls) around obstacles such as pipes chimney stacks, etc and other similar situation to ease up about corners. (b) Primer conforming to IS:3384-1965 @0.30 kg/sqm to be applied on prepared surface,till the surface is properly impregnated. (c) Apply a coat of bitumen 85/25 grade @1.20 kg/sqm over primer. (d) Over the coat of bitumen as above APP modified polymeric membrane ( weight not less than 3.6 kg/sqm) unrolled and bonded completely to the substrate with side over lap of 75mm or end over lap of 100 mm.The overlaps are then sealed/fused by flame or bitumen as per manufacture instruction. A coat of hot blown bitumen grade 85/25 @ 1.20 kg/sqm shall be applied on top of APP modified polymeric membrane and finally it will be finished with a coat of aluminium paint @ 0.20 kg/sqm as per manufacturer instructions. |
| 36 | S & F for 2nd classclean sawn hard wood in scantling. |
| 37 | M & L 595 mm x 595 mm false ceiling system , using hot dipped galvanised steel section exposed surface with precoated capping, GItee(Galvanised @120 grms, both side inclusive and black painted groove on all T webs) and cross tee of size 24 x 32 mm & 24 x 27 mm having 0.27 mm gauge at every 600 mm c/c interval and wall angle of size 19 x 19 mm having 0.35 mm gauge fixed to the wall. The above grid is to be suspended at every 1200 mm c/c in both direction using 2mm thick pre-straightened GI wire laying designer tile ivory painted (high pressure steam cured) of 4 mm thickness (as per IS 14862) of size 595 x 595 mm and ant ine of the design e-board (cascadev or electra) , back of the tile duly sanded and finished with a coat of protective paint over the formed grid etc complete all as specified and directed. |
| 38 | S&F 35 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides. Complete all as specified and directed. |
| 39 | S&F 30 mm thick factory made flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides. Complete all as specified and directed. |
| 40 | S&F IInd class hard wood, 35mm thick skeleton shutters open rebated & prepared to receive, glass, gauge etc. (without sash bars), edge of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc,size of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a); supplied and fitted to chowkahts. Complete all as specified and directed. |
| 41 | Preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer. Complete all as specified and directed. |
| 42 | Preparation of old wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint . Complete all as specified and directed. |
| 43 | S & F factory made WPC single extruded 100% lead free ROHS certified board of 18mm thick pre laminated moulded shutter for kitchen, cupboards. The laminated shutter should bepre laminated side with different design and other side plain white of density not less than 600 kg / cum manufactured by an ISO 9001:2015 certified company. The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity and complete all as specified and directed. |
| 44 | Supply & fixing factory made single extruded WPC(Wood polymer composite)Solid door frame/ chowkat of size 100X50 comprising of virign PVC polymer of K value 58-60 (suspension grade ) calcium corbonate and natural fibers ( wood powder/rice husk /wheat husk)and non toxic additives (max toxicity index of 12 to 100 gms) fabricated with mitred joints and applying PVC solventcement and screwed with full body threaded star headed SS screws having min frame density of750Kg/cum screw withdrawal strength of 2200 N (face) & 1100 N edge,minimum compressive strength of 58 N/mm2, moduus of elasticity 900N/mm2 and resistance to spread of flame of class "A" category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in postion with SS dash fasterns / hold fast of required dia and length,colour of door frame to match that of shutter all asspecified and directed. |
| 45 | S&F factory madesingle extrudedWPC (Wood polymer Composite) Solid Plain Flush Door Shutter of 30 mm sizecomprising of virgin PVC resin of K value 58-60 (Suspension Grade), Calcium Carbonate and natural Fibers (Wood Powders/ rice husk/ wheat husk) and Non toxic additives (max toxicity index of 12 for 100 gms) havingmin density of650 Kg/Cum and screw withdrawal strength of 1800 N (Face) &900 N (Edge) Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being Termite/ Borer proof. Water/ Moisture Proof, Fire retardant and fixing withstainless steel but hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer - in- Charge, Materia test certificate and authentication should be compulsory provided by the manufacturing company. |
| 46 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded |
| 47 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete |
| 48 | S&F for mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding, FE-290 grade E-165 complete all as specfied and directed. |
| 49 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty or fixed with bead/ glazing pins in squares n.exc. .5 sqm each pane all corner of glass to be fixed with silicon complete all as specified and directed. |
| 50 | S&F 4 mm thick Figured glass, pin head type and glazing with oil putty in squares n.exc 0.5 sq. m in each pane complete all as specified and directed. |
| 51 | S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed |
| 52 | S&F Stainless steel tower bolt 200 mm long. complete all as specified and as directed |
| 53 | ---ditto-- as per item No. 52 but fixed in repairs |
| 54 | S&F Stainless steel sliding door bolt size 200 mm with hasp, staple (bolttype)and fixing clips of sheet, . Complete all as specified and directed by Engr-In-charge. |
| 55 | ---ditto-- as per item No. 54 but fixed in repairs |
| 56 | S&F150 mm long SS handle, complete all as specified and as directed |
| 57 | ---ditto--as per item No.56 but fixed in repairs |
| 58 | S&F double legged SS floor door stopper 150 mm long. Complete all as specified and as directed |
| 59 | S&F bal catches with 8 mm dia steel ball magnet catches for cuboard shutter including strking plate as approved etc completeall as specified and as directed |
| 60 | S&F in repair mild steel helical door spring 300 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with weldingto steel frames complete all as specified and directed |
| 61 | S&F in repairs stainless steel decorative curtain rod of 25 mm bore withincluding brakets 02 nos finalie 02 nos) etc complete all as specified and as directed |
| 62 | S & F hydraulic concealed hinge with clip on installation and integrated Silent System, opening angle not less than 100º, For shutter thickness 15 - 24 mm full overlay type shutters, hinge cup dia 35 mm including necessary fixing arrangement with SS screw complete all as specified & directed. |
| 63 | S & Fforstainlesssteel glossy finish hat peg set of five tier with necessary fitting complete all as specified and directed. |
| 64 | S&F in repairs 500 litre rotational moulded tripple layer polyethlene water storage tanks white colour (cylindrical vertical with closed top) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 65 | Disconnecting existing tanks capacitynot exc 500 ltr, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. |
| 66 | S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed |
| 67 | S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed |
| 68 | M & L for cutting chases, pinning in brick/PCC blocks wall in making good to facings where required and pointing in cement mortar 1:3 and cutting chases for concealed water tubing etc and making good complete all as specified and as directed |
| 69 | S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 70 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 20 mm dia bore pipe (including in short length) complete all as specified and as directed |
| 71 | Taking up or down 15 mm steel tubing and connections, including cleaning for refixing in new or old position(walls, ceiling, floors etc). Complete all as specified and directed. |
| 72 | Taking up or down 20mm steel tubing and connections, including cleaning for refixing in new or old position(walls, ceiling, floors etc). Complete all as specified and directed. |
| 73 | S&F in repairs vitreous chinaware coloured wash hand basin with pedestalofsize 55X40 cmcomplete including fancy CP pillar tap, CP brass waste coupling ,waste pipe including fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed. |
| 74 | S & F in repair fancy type 125mm size square brass CP shower rose with or without swivel joints complete all as specified and as directed. |
| 75 | S&F in repair bib tap long body fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed |
| 76 | S & F Brass CP wall mixer 15 mm bore(wall mounted type) for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and as directed |
| 77 | S&F in repair stop valves/angle valves fancy typechromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionsfixed for 15 mm dia bore pipe complete all as specified and as directed |
| 78 | S&F in repair 15mm bore Pillar taps fancy type, cast copper alloy, with long swan neck , chromium plated, screwed down high pressure, with or without lettered `Hot" or `Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixedall as specified and as directed |
| 79 | S&F as in repair Bevelled edge mirror frame less of selected quality of size 600 mm x 450 mm fixed with 4 nos SS studs etc complete all as specified and as directed |
| 80 | S&F in repairtubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed |
| 81 | S&F in repair PVC connection of 45 cm length including brass nuts complete all as specifiedand as directed |
| 82 | S&F fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. |
| 83 | S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with CP railing fixed with fancy type screws complete all as specified and directed. |
| 84 | S&Fin repairs vitreous china squatting pan orissa pattern long pan size 580 mm x440mm white with spun pipe ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed |
| 85 | S&F in repair PVC low level flushing cistern 10 litres, valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, flushing pipe complete all as specified and directed. |
| 86 | S&F in repair for 75 mm bore out let cast floor trap spun pipe (conforming to IS 3989) incl cockroach trap with gratings including including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed |
| 87 | S&F for 75 mm bore Cast ironspun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and as directed |
| 88 | S&F for 100 mm bore Cast ironspun pipe (conforming to IS 3989) soil, waste and vent pipes, in any length with or without ears with lead joints, laid in trenches or in floors or vertically cast, complete all as specified and as directed |
| 89 | S&F100 mm bore cast iron Bends of (any radius),spun pipe (conforming to IS 3989) diminishing piecs or tapers (larger bore measured) complete all as specified and as directed |
| 90 | S&F50 mm cast iron cowlsspun pipe (conforming to IS 3989) complete all as specified and as directed |
| 91 | S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen with plug/waste pipe washers including cantiliver bracket or, connecting unions etc over all size 915 x 460mm with bowel size 410mm x 330mm x 160mm complete all as specified and as directed |
| 92 | S&F MSjoist channel (Fe 410-W Gde E-250 Quality A), angle or Tee section MS tubes, flats square bars etcfixed indepently or framed or without connecting plates ,trusses etc any type framing including purlins and rafters etc confirming to Grade Fe 410-0 or Fe-310-0 complete all as specified and directed by Engr-in-Charge |
| 93 | S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 94 | S & F pre-painted galvalume aluminium zinc coating GI based plain steel 0.50 mm thick for ridge cover of any colour as directed by GE having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge |
| 95 | S&F framed work as in doors or gates of angle or other section Fe 410 W Gde E 250 with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 96 | S&F 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete including cutting out of existing sheet if required complete all as specified and directed. |
| 97 | S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 98 | S&F 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed |
| 99 | M & L PCC 1:3:6 Type C 0 usind 12.5 mm graded stone aggregate for backing of door chawkhats complata all as specified and directed by Engr-in Charge |
| 100 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 101 | M&L for Preparation of old steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint etc complete all as specified and as directed |
| 102 | Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with creosote. Complete all as specified & directed. |
| 103 | M&L three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed |
| 104 | M&L for complete removal of existing treatment from wall upto plaster surface by washing, rubbing down and stopping of existing treatment including cleaning of mortar drops, smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots etc and preparation of plasteredsurfaces finally rubbed and smooth with sand paper all as directed by Engr-in-charge. |
| 105 | M&L for applying two coats of acrylic distemperover a coat of primer, white or tinted over 0.75 to 1 mm thick putty in two coat over old plastered surface. Complete all as specified & directed. |
| 106 | M&L for applying two coats of acrylic distemperover a coat of primer, white or tinted over 0.75 to 1 mm thick putty in two coat over newly plastered surface. Complete all as specified & directed. |
| 107 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old plasteredsurfaces. Complete all as specified and directed. |
| 108 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surfaces. Complete all as specified and directed. |
| 109 | M & L applying two coats of cement based paint over a coat of primer on old/new plastered surface incl preparation of surfaces complete all as specified and directed by Engineer-in-Charge. |
| 110 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed |
| 111 | Demolition ofcement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed |
| 112 | M&L forreinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall, landing, balconies, canopies, deck slabs and in shelves and like in repair to Chajjas, Claddings, soffits etc including bonding agent, complete all as specified and directed. Note:-Reinforcement to be measured & paid under respective items. |
| 113 | M&L for form work to chullah hoods, chajjas, troughs and similar items includingedges for rough finished surfaces of concrete flat, complete all as specified and directed. |
| 114 | M & L for form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 115 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete incl welding etc (if reqd) all as specified and directed. |
| 116 | --ditto-- as per item 115 above but 6mm to 8mm. |
| 117 | Supply only liquid water proofing compound complete all as specified and directed. |
| 118 | Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loosesoil complete all as specified and directed by Engineer-In- Charge. |
| 119 | Returningfilling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed by Engineer-In- Charge. |
| 120 | Removing excavated material exceeding 250M but not exc 500m and depositing where directed. Complete all as specified and directed by Engineer-In- Charge. |
| 121 | M&L for providing plain cement concrete 1:4:8 type D-1 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified and directed by Engr-In- Charge. |
| 122 | M&L for providing precast cement concrete coping with plain fair faces incl chamferes, weathering,throating etc type B0, 1:2:4using 12.5mm graded stone aggregate and set in CM 1:4 complete all as specified and directed by Engineer-In- Charge. |
| 123 | M & L for cement concrete 1:3:6 type C-2 for 150 mm dia in concrete bed to drain pipes including packing under and haunching against the sides of pipes etc complete all as specified and directed by Engineer-In- Charge |
| 124 | M & L for reinforced concrete pipes,150mm dia class NP-2 laid and jointed complete with collars complete all as specified and directed by Engineer-In- Charge. |
| 125 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1 : 4 mixed with water proofing compound finished even and smooth without using extra cement complete all as specified and directed by Engineer-In- Charge. (Water proofing compound shall be measure and paid separatelly). |
| 126 | Supply only liquid water proofing compound complete all as specified and directed by Engineer-In- Charge. |
| 127 | M&L for 15mm thick rendering on other than fair faces of brick work in CM 1 : 6 finished even and smooth without using extra cementcomplete all as specified and directed by Engineer-In- Charge. |
| 128 | Cutting into existing manholes for connecting new drains making good to pipe and rendering,cutting out existing benchingfor and forming branch channel (1/2 or 3/4section ) in cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified and directed by Engineer-In- Charge. |
| 129 | M&L for mild steel TMT bars 10 mm dia and over cut to length and bent to shape required and binding with mild steel wire dia not less than 0.9 mm (annealed) complete all as specified complete all as specified and directed by Engineer-In- Charge |
| 130 | M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab and man hole covers etc complete all as specified and directed by Engineer-In- Charge. |
| 131 | S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 132 | S&F in repairs Gun metal gate valve iron wheel head screwed both ends for iron pipe of 20 mm bore complete all as specified and directed. |
| 133 | Surface excavation n exc 30 cm deep and averaging 15 cm and getting out in any type of soil complete all as specified. |
| 134 | Removing excavation material surplus soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified & directed. |
| 135 | M& L for 75 mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as in sub base floor / pavings complete all as specified and directed. |
| 136 | M&L heavy duty coloured parking tiles 10 to 12 mm thick dark shaded (Square /rectangular ), area of each tile not exceeding 0.36 sqm in floor etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade, incl 15 mm thick screed bed in cement mortar 1:4. Complete all as specified and as directed. |
| 137 | Taking down carefully copper/Aluminum point wiring (light, fan socket and power) complete including switches, ceiling rose lamp holder and regulator etc and removing from site and making good disturbed surfaces of walls/floors etc complete all as specified and directed by Engr-in-charge Note: old point wiring obtained from Sl item no 2-3 of Sch A. |
| 138 | M&L point in replacement wiring with 1.5 Sqmm (nominal area) two single core PVC insulated unsheathed multi stranded copper conductor cable 1100 volts grade, FRLS-H grade in and including medium dutyconcealed PVC conduit 20 mm dia or higher and conduit fittings and all accessories with suitable size of Metal flush box suitable for mounting of modular switches, sockets, fan regulator etc with modular plate and frame of 01 module to 18 module as required at site, including contineous earth wire PVC insulated, unsheathed, multi stranded copper conductor cable 1.5 sqmm (nominal area) FRLS-H grade, green colour, up to common earth and connected to earth dolly compete all as specified and directed of the following. Note : 1. Point wiring should be carried out on surface mounted rigid PVC conduit or casing-caping on existing RCC beam, column, roof or false ceiling. 2. Colour code will be maintained as per IE rule i.e. Red/Yellow/Blue for phases, Black for Neutral and Green for earth wire. 3. Cost of Modular Metal flush box, modular plate and frame deemed to be included in quoted rate for point wiring. 4. Make of Modular metal flush box, modular plate and frame, switch, socket, regulator, bell push should be same. 5. Switch, socket, regulator, bell push will be measured and paid under respective item. |
| 139 | One light point point /bell buzzer point controlled by one 1 way switch. |
| 140 | One ceiling fan/Exhaust fan point controlled by one 1 way switch through Regulator. |
| 141 | One three pin 6 Amp socket on same board. |
| 142 | One three pin 6 Amp socket on independent board |
| 143 | All as per item No 2.4 above but one 3 pin socket outlet 16 Amp independent, with cable 2.5 Sq mm size, with earth continuity coductor of size 2.5 Sq mm. |
| 144 | S&F modular switch 1 way 6 A 1 module complete all as specified & directed. |
| 145 | S&F modular switch 1 way 16 A 1 module complete all as specified & directed. |
| 146 | S&F modular socket 6 A- 2/3 pin combined 2 module complete all as specified & directed. |
| 147 | S&F modular socket 6/16 A- 2/3 pin combined 2 module complete all as specified & directed. |
| 148 | S&F modular bell push, 6 A, 1 module complete all as specified & directed. |
| 149 | S&F ding dong bell AC 230 V single pole complete all as specified and directed . |
| 150 | S&F modular fan regulator , 120 watt - 2 module complete all as specified and directed . |
| 151 | S&F ceiling rose, 3 terminal PVC/polycarbonate, isolated body 230 V AC. |
| 152 | S&F lamp holder PVC/polycarbonate type with back plate suitable for batten fittings 230 V AC. |
| 153 | M&Lin replacementsub main wiring with 2 Single core PVC insulated unsheathed FRLS-H cable 1100 Volts grade heavy duty copper conductor multistranded of size 6 Sq.mm. (nominal area) drawing in and including min 20 mm. dia or higherPVC conduit medium duty concealed, conduit heavy duty accessories and fittingswith chasing/ cutting and Insulated unsheathed FRLS-H cable copper conductor multistranded of size 6.0 Sq. mm. as earth wire upto common earth and connected to earth dolly complete all as specified & directed including taking down old sub main wiring . |
| 154 | Supply & fixingand Testing TP & N Vertical load line(VTPN) 6 way 415 Volts 50 Hz indoor type double door sheet metal enclosure IP-43 DB"sIK-09 flush mounted with 250 Amp Copper busbar for each phase with two neutral bar & two earthbar and cable ties for cable management including Provision of MCCB 63 Amps,ICs=100%, ICu, 16KA four pole as incomer including connecting terminal strip complete and SP MCBs as out going etc complete pre wired with suitable size copper conductor complete all as specified and directed by Eng-in-charge including taking out old unserviceable DB and removing from site. (Note :- MCB/ MCCBshall be measured and paid separately) |
| 155 | S&F in replacementsheet metal enclosures 240 voltwith 200 ampsrated copperbus bar for double door 8 way IP-43DB"s lk-09suitable for one MCB SPN as incoming and 6 MCB SP as out going,mounting flush on wall and making good disturbed surfaces complete all as specified and directed by Engr-in-charge including taking down old unserviceable DBs . (MCBs shall be measured and paid separately). |
| 156 | S&F MCB SPN pole 240 Volt 10 KA 40-63 Amp "B" series conforming to ISI marked complete all as specified & directed . |
| 157 | S&F MCB SP,240 volt, 10 KA, 6-32 Amp, "C" series conforming to ISI marked all as specified and directed . |
| 158 | S&F MCCB 415 Volt 16 KA 4 pole 63 Amp magnetic trip release & setting as incoming with fixing arrangement complete all as specified and directed. |
| 159 | S&F in replacementof LED light fitting1200 mm length minimum 2000-2200 Lumen, system efficiancy not less than 100lm/watt with 2.5 KV surge protection electronic driver aluminium extruded/Polycarbonate body suitable for surface, wall or ceilingmounting with acessories like both side end cap, driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as directed. |
| 160 | S&F LED 1x10 W, 220V AC decorative wall lights with driver ,holder including LED bulb connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 161 | S&F LED light fitting 1x10 w bulk head fitting complete with accessories and including connecting up with three core twisted flexible copper conductor cable of suitable size |
| 162 | S & F high efficiencyLED bulbs 12 watt with B22 cap complete all as specified and directed. |
| 163 | S&F ceiling fans complete with blades ,down rods with controlling/conneced accessories, 230 V ,1200mm sweep. Min air delivery 225 CMM with Five Star Rated with Brushless Direct Current(BLDC) Motor. Note :- Note:(1) Rate for hanging arrangements, writing MES No on ceilng fan deemed to be included. |
| 164 | S&F exhaust fanssteel body AC single phase 230 Vof size 300 mm sweep with blades, frame and louvers inluding M&L for making holes of suitable size and making good to disturbed surfaces if required, connecting testing, writing MES NO on fan etc. complete all as directed by Engr-in-charge. |
| 165 | S&F electric water heater storage type ABS outer body and glass line coated inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, Fixing bolts, stainless steel braided connection piece 450 mm long etc. |
| 166 | S&F Sheet metal enclosure, single pole and neutral with two pin and earth plug and socket including inbuilt MCB SPN 20A for protection of appliances like AC/Geyser suitable for flush mounting and surface mounting complete all as specified. |
| 167 | M&L for earthingcomplete with using galvanized mild steel earth plate (electrode) 600 mm x 600 mmx 6 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to be packed thickness of 15 cm all round the plateusing 4 mm diaGI earth lead wire as earth lead moulded and rivetted to earthplate at one end and connected to main equipment at switch/control board at another end, GI earth leadprotected in and including 15 mm dia GI ‘medium grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘medium grade’ as water pipe from earth chamber to upper edge of the earth plate,GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mmthick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as per electrical plate No.3 of SSR Part-II 2010 and testing on completion all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
