Military Engineer Services-MES has published Tender For Construction Of Pi Mess Building And Addition/ Alteration To Bldg No P-30 Under Ge (N) At Mil Stn Patiala. Submission Date for this Tender is 04-05-2024. Building Work Tenders in patiala Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-05-2024 |
| Sl. No. | Item Description |
| 1 | Lump sum price worked out by the tenderer for“BUILDING /STRUCTURE WORKS" as listed in Schedule ‘A’ Section - I |
| 2 | Lump sum price worked out by the tenderer for“INTERNAL ELECTRIFICATION WORKS" as listed in Schedule ‘A’ Section - II (Part-I) |
| 3 | Sch "A" Sec - II (Part-II), (INTERNAL ELECTRIFICATION WORKS) |
| 4 | Point wiring (using approved colour coding as per IS)with 1100 volts grade, stranded copper conductor 1.5 Sqmm (nominal area), FRLSH,PVC insulated and unsheathed cable IS 694 marked TEC and FIA approved and includingPVC concealed conduit(thickness not less than 1.5mm and 20 m dia) and its fittings ISI marked PVC junction boxes terminated in sunken/pressed metal flush box for mounting of modular switches/sockets/fan regulators and white cover plate with frame, also including FRLSHPVC insulated unsheathed stranded copper conductor 1.5 Sqmm (nominal area)1100 volts grade, copper conductor cable as earth continuity conductor to common earth and connected to earth dolly including necessary cutting/chases complete all as specified and directed by Engineer-in-Charge for One light point controlled by one switch or one (Ceiling/ Wall/ Exhaust) fan point controlled by one switch and regulator and one bell pointcontrolled by one bell push(Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth)Note :Eye/bottle thimbles shall be used for connection in switches/sockets & MCB"s in DB"s without any extra cost. |
| 5 | All as per Item No. 4.00 here in before but for One three pins 5 Amps switch socket outlet point on independent board etc complete all as specified and as directed by Engineer-in-charge. |
| 6 | All as per Item No. 4.00 here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches etc complete all as specified and as directed by Engineer-in-charge. |
| 7 | All as per Item No. 4.00 here in before but for One 6 pin 5/15 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and2.5 sqmm copper cables as earth wire. |
| 8 | Supply and fix ceiling fan 1200 mm sweep AC 230 V BLDC type without remote, 5 Star rated super enamelled copper winding of B class insulation, single phase minimum 26 Watt (+10%) 0.90 (Min) PF 220 CMM 350 RPM (+10%) temperature rise 40 degree maximum complete with 03 Nos blades down rod and accessories white colour total harmonic less than 10% 5 speed including hanging in position and connection with flexible cord twin core twisted copper conductor of size 23/0.0026 from ceiling rose to fanetc complete all as specified and directed by Engr - in charge. |
| 9 | Sub-main wiring with 2 single core FRLSH insulated and unsheathed cable with stranded copper conductor of 4.0 Sq mm drawing into & including heavy grade PVC Concealed conduit ISI marked of suitable size with all accessories and one additional 1 run of wire of 4.0 Sq mm but green in colour for earth DBs and boxes with proper thimbles,including necessary cutting/chases complete all as specified and directed. Note: (i) Three runs each of one RM of 4.0 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose.. |
| 10 | Sub-main wiring with 2 single core FRLSH insulated and unsheathed cable with stranded copper conductor of 1.5 Sq mm drawing into & including heavy grade PVC Concealed conduit ISI marked of suitable size with all accessories and one additional 1 run of wire of 1.5 Sq mm but green in colour for earth DBs and boxes with proper thimbles,including necessary cutting/chases complete all as specified and directed. Note: (i) Three runs each of one RM of 1.5 sqmm cable together with conduit shall be considered as 1 running meter for payment purpose.. |
| 11 | Supply and fixing retrofit LED bulb 1 X 9 W having Lumens efficiency , BEE rated 3 star LED lamps etc complete all as specified and directed by Engr - in charge. |
| 12 | Supply and fix LEDtube light fittings 1 x 20 W, 4.0 feet long 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge. |
| 13 | Supply and fixLED mirrortube light fittings 1 x 10 W, 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge. |
| 14 | Supply and fix heavy duty exhaust fan, steel body AC single Phase. 230V of size250 mm sweep with, blades, and frame and louvers and all accessories and including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 15 | Supply and fixing MCBSP 6 -32 Amps,10 KA,,"C" series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. |
| 16 | Supply and fix MCB TPN 4 Pole 40-100A, B curve 415 V with breaking capacity 10 KAsuitable for TPN DB 4 way,50 HZ testing commissioning all as directed by Engr-in -Charge. |
| 17 | Supply and fix sheet metal enclosure double doordistribution board TPN 12 way240 V, 50 Hz, IP 43 double doorwith neutral busbar 200 Amp, Earthing bar and din rail complete. |
| 18 | Supply and fixing earth metal plug and socket single pole and neutral with a two pin and earth plug and socket alongwith one single pole MCB of 20 Amp concealed in wall all as directed by Engineer-in-charge. |
| 19 | Supply and Fixing LED building security light with pressure die cast aluminum housing with polycarbonate cover, finless design, dedicated peanut optics, > 100 lumen/W system efficiency, minimum 2500 system lumens, 25 W system wattage (including driver), color temperature > 5700K, CRI>80, IP65 protection, IK07 ratingincluding suitable size of 1.2 meter long bend pipe (bend at 120°) with clamps and fixing accessories etc.The potted electronic driver with THD<10%, PF>0.95, LED fitting is complete all as per OEM specified and directed. LED driver and housing is of same make as of light fitting. All type of testing for photometry, electrical and electronic parameters is done in approved lab. |
| 20 | Material & Labour for earthing complete with galvanized steel earth plate electrode 60×60cm×6mm thick electrode burried directly in ground (earth pit notless than 2.25 m deep below GL) with top edge of the plate not less than 1.5 m below the normal ground level connected with GI wire 4 mm diaas earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel including necessaryexcavation & earth work in any type of soil, removing surplus soil to a distance not exc 50m, with and including PCC chamber in PCC (1:2:4), type B1, using 20 mm graded stone aggregate, provn of 40 mm RCC with handle, watering arrangement with funnel internally secured with wire mesh with 20 mm dia medium grade GI pipe for watering, 40 mm dia light grade Gl pipe for lead protection in and including alternate layer of charcoal dust and common salt complete all as shown in electrical plate No 3 of SSR Part-I (2009) connected to earthing test point all as specified and indicatedincluding testing on completion including retrieving of old GI earth plate, CI cover, GI pipes, angle iron frame from existing earthing as directed by Engineer-in-Charge. NOTE : - (i). Earthing strip GI/copper upto 7.5m will be measured and paid under this item only. (ii). The earth chamber shall be constructed 50 cm away from the edge of earth pit and the cost of the same is deemed to be included in the rate quoted for above item. (ii). Quoted rate is deemed to be inclusive of cost of demolition of old earthing as directed by Engr-in-Charge. (iii). The new earthing so constructed must have resisitance value below 2 ohms. If the aforesaid resistance value is not achieved contractor has to make proper aadditions/alterations to the newly constructed earthing at his own cost. |
| 21 | Subtotal |
| 22 | Lump sum price worked out by the tenderer for“INTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Section - III (Part-I) |
| 23 | Sch "A" Sec - III (Part-II), (INTERNAL WATER SUPPLY WORKS) |
| 24 | Supply & fixing Bib tap long body,15mm bore bib tap, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and as directed. |
| 25 | Subtotal |
| 26 | Lump sum price worked out by the tenderer for“FENCING WORK" as listed in Schedule ‘A’ Section -IV (Part-I) |
| 27 | Sch "A" Sec - V (Part-II),“INTERLOCKING TILES & PATH WORK" |
| 28 | Material and labourfor machine pressed precast concrete interlocking paver block rubber moulded any shape and size with grey cement and no pigment confirming to IS 15658-2006 of 65 mm thickness M-35 Grade. prepolished & preglazed, shape haxagon/ triangular/ zigzag/ I-shaped etc. as directed, confirming to relevant IS, having compressive strength not less than 350 Kg/ Sqcm, laid over 150mm thick PCC 1:4:8 type D-2and including 25mm thick layer of sand cushioning and filling the interstices etc with sand complete all as specified and as directed. |
| 29 | Material and labour for factory made rubber moulded pre-cast cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate) as in Kerb stone size 300x450x100mm with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete including embedding in the ground to depths indicated and tamping ground around and also for removing any surplus spoil to a distance n. exc. 50 m complete all as specified and as directed. |
| 30 | Subtotal |
| 31 | Lump sum price worked out by the tenderer for“SEWAGE DISPOSAL WORK" as listed in Schedule ‘A’ Section - VI (Part-I) |
| 32 | Lump sum price worked out by the tenderer for“EXTERNAL WATER SUPPLY WORKS" as listed in Schedule ‘A’ Section - VII (Part-I) |
| 33 | Sch "A" Sec - VII (Part-II), (EXTERNAL WATER SUPPLY WORKS) |
| 34 | Cutting of existing GI pipe line 40mm dia and inserting tee 50x50x20 mm for taking branch connection all as directed including threading excavation and earth work etc. complete all as specified and directed.. |
| 35 | Subtotal |
| 36 | Lump sum price worked out by the tenderer for“EXTERNAL ELECTRIFICATION WORKS" as listed in Schedule ‘A’ Section - VIII (Part-I) |
| 37 | Sch "A" Sec - VIII (Part-II), (EXTERNAL ELECTRIFICATION WORKS) |
| 38 | Material & Labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric LT cables (heavy duty) 16 sqmm 4 core ,earthed system, stranded aluminium conductor including cable glands, cable lugs etc, to suit the cable size, 1100 volt grade, ISI marked,laid in trenches or fixing along the poles or passing through the pipes or laid under floors or through walls/ducts etc. complete all as specified |
| 39 | Material and labour precast concrete cable cover, class LV, type 1 flat, size 250mm x 150mm x 40mm complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Subtotal |
| 41 | Sch "A" Sec - IX (Part-II), (ADDTION/ALTERATION WORKS) |
| 42 | Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 43 | Material and labourfor cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 44 | Complete removal of existing treatment of any type/description from walls/RCC surfaces etc with mechanical means/grinder complete all as specified and directed. |
| 45 | Prepration of new/old plaster of wall and applying 02 coats of interior/exterior emulsion paint (white shade) by using roller to wall surfaces over & including a coat of interior wall primer as recommended for under coat by manufacturer of interior emulsion by using emulsion and primer including acrylic thick wall care putty 1.5 to 2.5 mm thick complete all as specified and directed. |
| 46 | Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. |
| 47 | Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqmincl cutting holesand making good reqd shape for hold fast block for new frame complete all as specified. |
| 48 | Supply and fix Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, |
| 49 | Material and labourfor PCC (1:3:6 ) type C 1 using 20 mm graded aggregate as in filling in PS Chowkhats/Holdfast Block all as specified . |
| 50 | Supply and fix factory made flush shutters 35mm thick, BWP conforming to IS: 2202 (Part-I) non-decorative type, core of block board construction with frame of Ist class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters complete all as specified and incl supply and fixing following items:- (a) Mild SteelButt Hinges 150mm -3 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x3000mm- 1 nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 nos per leaf |
| 51 | Material and labourfor Powder coated (Minimum thickness of powder coating 50 micron) Anodised aluminium frames and shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge. |
| 52 | Supply and fix sheet glass ordinary quality 4mm thick area n.exc 0.50 sqm each complete all as specified and directed by Engineer-in-Charge. |
| 53 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and 1.40mm avg width of apreture complete all as specified and directed by Engineer-in-Charge. |
| 54 | Supply and fix stainless steel (304 grade) finished butt hinges 125mm complete all as specified and directed |
| 55 | Supply and fix powder coated aluminium tower bolt 200mm long complete all as specified and directed by Engineer-in-Charge |
| 56 | Supply and fix powder coated aluminium handles 150mm complete all as specified and directed by Engineer-in-Charge |
| 57 | Supply and fix powder coated aluminium hook and eye of suitable length adjustable to aluminium window shutters complete all as specified and directed by Engineer-in-Charge |
| 58 | Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 59 | Supply and fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails.M.S frame shall be covered with heat moulded plain colour PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and botom rail on either side & as gap insert for top rail & bottom rails; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 60 | Dismantling, floor, hearth or wall tiling including CM (bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge |
| 61 | Material and labourfor anti skid ceramic joint free premium quality coloured tiles exe 0.06 sqm but n-exe 0.11 sqm and 6-8 mm thick as in floors etc in any pattern of light & dark tiles as approved set and jointed in neat cement slurry and pointed in white or colored cement to match in floor etc , overand pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 62 | Material and labourfor Glazed ceramic tiles 200 x 300mm x 7mm thick coloured on vertical surfaces set and jointed in neat cement slurry and pointed in white cement to match including 10 mm thick rendering of CM 1:4 all as directed and specified. |
| 63 | Supply and fix in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white with (C I P trap long size) joint run and leadfront or back inlet with integral foot rest including connection to trap and to flushing pipe, anti-syphonage pipe, etc. complete and making good to floor in CM 1:3 all as directed and specified. |
| 64 | Supply and fix in repair flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. |
| 65 | Supply and fix in repair Soap dish, vitreous China white, ap proximate size 160x 160x90mm complete all as directed and specified. |
| 66 | Taking up or down existing steel tubing and connections, 15mm bore complete all as specified. |
| 67 | Supply and fix Steel water tubing medium grade 15mm bore galvanised with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and directed |
| 68 | Supply and fix Bathing mixerfancy type, chromium plated 15mm bore, non telephonic and including connected accessories, complete all as apecified and directed. |
| 69 | Supply and fix in repair towel rail, CP brass, 20mm dia "D" type, 60 cm long between flang complete all as specified. |
| 70 | Supply and fix in repair Brass chromium plated shower roses 50mm size with swivel joint any size all as directed and specified. |
| 71 | Supply and fix in repair PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified. |
| 72 | Supply and fix in repair stainless steel grating 150x150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified . |
| 73 | Supply and fix PVC hollow Wall panelling of section sizes 150x10 mm (colour/pattern as approved by Accepting Officer) complete fixed in position in all respect including supply and fixing of all accessories like fasteners/screws/solvent etc all as recommended by manufacturer all as specified. |
| 74 | Supply and fix Vitreous china urinal, stall type, of size 330x300x450mm incl providing and fixing plugs, bedding urinal against wall in CM 1:2, securing urinals to plugs with and incl Supply & Fix of all accessories for fixing as recommended by manufacturer like 60mm long brass secrews/fasteners/rag bolts etc. waste coupling 32mm , bottle trap, pointing urinal back in cement; connection for discharge pipe incl necessary packing, union and 15mm CP urinal spreader and CP connection pipe complete all as specified. |
| 75 | Supply and fix vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) S/P trap white/ivory including connection to drain (or out going pipe) and to flushing pipe, anti syphonage pipe,etc. with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and including supply and fix of PVC long arm S/P trap so that joint is avoided inside the building as well as in wall and outlet straight away come out of wall in all floors G.F.and taking down existing of any description/size complete in all respect all as specified. |
| 76 | Supply and fix health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 77 | Supply and fix Angular Stop Cock with wall flange, fancy type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. |
| 78 | Supply & Fix fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed by Engineer-in-Charge |
| 79 | Supply and fix gypsum board 8-10mm thick in ceiling fixed with screws as per manufacturer instructions plain/ colour fixed with steel snap grid (power coated bottom side) with T and L (25mmx30mmx1mm thick)section of size 600mmx600mm placed in ceiling L section fixed with wall with PVC rawal plugs and steel screws @ 600mm centre to centre and suspended/provided 5mm dia galvanised bar @ 1 sqm hanging arrangement and levels incl adjustable clips complete all as specified in clause 10.38 of schedule part-1 complete all as specified (note- if any minor electrifical and fixtures distributed their in will be match and fixed as existing) as specified and directed |
| 80 | Demolitionof brick work including allquoins arches pillars etc built in cement mortar complete all as specified and directed by Engineer-in-Charge. |
| 81 | Material and labourfor brick work in cement mortar (1:6) using sub class "B" bricks staight or curved on plan exc 6.0 m mean radius.complete all as specified and directed by Engineer-in-Charge |
| 82 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, over-hangs, etc. also splays between floors and beams, etc, flat, rough finished surfaces of concrete, complete all as specified and as directed. |
| 83 | Material and labourfor RCC 1:2:4 using 12.5 graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified. |
| 84 | Material and labour mild steel 10 mm dia and over TMT bar cut to length, bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed. |
| 85 | TMT deformed steel bars, 5mm dia and over up to and including 10mm dia as in stirrups, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed. |
| 86 | Subtotal |
| 87 | Lump sum price worked out by the tenderer for“EXCAVATION, EARTHWORK AND SITECLEARANCE DEVELOPMENT WORK" as listed in Schedule ‘A’ Section - X |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
