Military Engineer Services-MES has published Tender For Additional/Alternator Repair To Bldg No. T-212, Provn Of Toilet And Bathroom And Special Repairs / Replacement Of Ber Eqpt ( Sanctioned Works ) At Certain Units Under Ge ( East ) Jrc Please Refer Tender Documents. Submission Date for this Tender is 16-04-2024. Building Work Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 09-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-04-2024 |
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan andgetting out complete all as specified and directed. |
| 3 | All as per Srl item No. 2.00 here-in-before but soft/ disintegrated rock. |
| 4 | Returning filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick each layer complete all as specified and directed. |
| 5 | Removing excavated soil to a distance n.exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed. |
| 6 | Material and labour for approved earth filling including spread and levelled in layers not exc 25 mm thick watering and rammed to a true surface complete all as specified. |
| 7 | Material and labour for PCC (1:4:8) type D-2 using 40mm graded crushed stone aggregate) as in foundation, filling & mass concrete, sub base to floors etc complete all as specified and directed. |
| 8 | Material and labour for brick work with old size sub class "B" bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:4) complete all as specified and directed. |
| 9 | Material and labour for brick work with old size sub class "B" bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed. |
| 10 | Material and labour for brick work with sub class "B" bricks, old size, straight or curved on plan exc 6m radius in half brick thick walls built in cement mortar (1:6) complete all as specified and directed. |
| 11 | Material and labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed. |
| 12 | Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc complete all as specified and directed. |
| 13 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed. |
| 14 | Use and waste of formwork to sides of pillars, posts, struts, piers,columns and stanchions, square, rectangular in rough finished surfaces of concretecomplete all as specified. |
| 15 | Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 16 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 17 | All as per srl item No 16.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. |
| 18 | Material and labour for RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed. |
| 19 | Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on wall, beams and column in floors, roofs, landing, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 20 | Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in beams, bressumers, cantilevers, lintels over 1.5m span complete all as specified and directed. |
| 21 | Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed. |
| 22 | Material and labour for 15mm thick rendering in cement mortar (1:6) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 23 | Material and labour for 15mm thick rendering in cement mortar (1:4) on fair faces of brick wall or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 24 | Material and labour for rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ). |
| 25 | Supply only integral water proofing compound complete all as specified and directed. |
| 26 | Material and labour for 5mm thick in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed. |
| 27 | Material and labour preparation of new plastered surface of walls and applying three coats of white washing complete all as specified and directed. |
| 28 | Material and labour preparation of new plastered surface of ceilings and applying three coats of white washing complete all as specified and directed. |
| 29 | Material and labour for preparation of newly plastered or unplastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 30 | Material and labour for 25mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4) type B-0 complete all as specified and directed. |
| 31 | Material and labour hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and leveled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 32 | Material and labour for 100mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed. |
| 33 | Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40mm graded stone aggregate), as in sub floors, sub base, hard standing, concrete surfaces finished fair & even to receive topping floor finish/layer complete all as specified and directed. |
| 34 | Material and labour for 25 mm thick cement concrete type B-1, 1:2:4 (20 mm graded aggregate) to receive the top layer of tiles complete all as specified and directed. |
| 35 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 36 | Material and labour for non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exc. 0.11 Sqm but not exceeding 0.18 Sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed. |
| 37 | All as per item No 36.00 but in skirting/ dado laid over and including 10mm thick rendering in cement mortar (1:4) as backing coat, rough finishes to received tiles complete all as specified. |
| 38 | Material and labour for glazed ceramic coloured tiles of size 350 x 450 x 6-7mm thick as in vertical surfaces i.e. skirting/ dado set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface laid over and including 10mm thick rendering in cement mortar (1:4) and finishing the surface fair and even to receive tiles complete all as specified and directed. |
| 39 | Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall and laid in floor, 110 mm bore complete all as specified and directed. |
| 40 | Supply and fixing PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall and laid in floor, 75 mm bore complete all as specified and directed. |
| 41 | Supply and fixing PVC (SWR) bends any radius 110mm bore all as specified and directed. |
| 42 | Supply and fixing PVC (SWR) bends any radius 75mm bore all as specified and directed. |
| 43 | Supply and fixing PVC (SWR) vent cowl 110mm bore all as specified and directed. |
| 44 | Material and labour for 75mm PVC (SWR) floor trap plain with grating including jointing to waste pipe fixed with solvent cement fixed including taking out damaged floor trap in any type and position complete all as specified and directed. |
| 45 | Supply and fixing mild steel CP grating 125mm dia with centre hole complete all as specified and directed. |
| 46 | Supply and fixing mild steel CP grating 150mm dia with centre hole complete all as specified and directed. |
| 47 | Supply and fixing 150mm dia cast iron gully trap setting and jointing with lead joint complete all as specified and directed |
| 48 | Taking up or down 15mm bore steel tubing and connections complete all as specified and directed. |
| 49 | Material and labour for 15mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings andor laid in floors etc complete all as specified and directed. |
| 50 | Material and labour for 20mm bore galvanised steel tubes, medium grade with & including all fittings fixed to wall, ceilings andor laid in floors etc complete all as specified and directed. Note for serial items No 49 & 50: Cost of GI fittings i.e shockets, elbows, tees, bends, wall clamps & other jointing material etc shall be deemed to be included in units rate quoted by bidder. |
| 51 | Supply and fixing vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet,integral foot rest including CI "P" or "S" trap with providing cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) for bedding and connecting to flushing cistern completeand connecting flush pipe etc and make good to floor complete all as specified. |
| 52 | Supply and fixing EWC vitreous china white wash down water closet pan with P trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe and suitable seat cover, etc. and making good to floor/ disturbed surfaces complete all as specified and directed. |
| 53 | Supply and fixing EWC vitreous china white wash down water closet pan with P trap and fixing bolts (excluding flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe and suitable seat cover, etc. and making good to floor/ disturbed surfaces including dismantling the existing unserviceable water closet complete all as specified and directed. |
| 54 | Supply and fixing vitreous china wash hand basin, white, flat back size 550 x 400mm including one number brass CP waste coupling and waste pipe, 32mm dia, brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 55 | Supply and fixing in repair vitreous china bowl urinal, half stall, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement including fixing of flush pipe, grating with waste coupling, union for discharge pipe, waste pipe spreader complete all as specified and directed. |
| 56 | Supply and fixing 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe including brackets complete all as specified and directed. |
| 57 | Supply and fixing 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe including brackets dismantling in existing complete all as specified and directed. |
| 58 | Supply and fixing PVC connection fiber, reinforced 45 cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed. |
| 59 | Supply and fixing health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 60 | Supply and fixing soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified. |
| 61 | Supply and fixing acrylic corner set of 3 pieces as per sample approved by Engineer-in-Charge all as specified and directed. |
| 62 | Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position all as specified and directed. |
| 63 | Supply and fixing rotational moulded polyethylene water storage tanks, 1000 litres capacity, (cylindrical vertical with closed top), ISI marked, hoisted and fixed in position all as specified in SSR Part I, fixed in position including dismantling of existing tank of any description all as specified and directed. |
| 64 | Supply and fixing ball valve brass high pressure with polythenefloat and fly nut complete screwed for 20mm bore diaof iron pipe or brass ferrule and fixed complete all as specified and directed. |
| 65 | Supply and fixing pillar tap, cast copper alloy chromium plated, with capstan heads, 15mm bore dia of pipe screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 66 | Supply and fixing brass chromium plated shower rose of 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed. |
| 67 | Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed complete all as specified and directed. |
| 68 | Supply and fixing brass chromium plated tubular towel rail 20mm dia, ‘D’ type, 600mm long between flanges fixed including dismantling in existing complete all as specified and directed. |
| 69 | Supply and fixing stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup, screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, all as specified and directed . |
| 70 | Supply and fixing 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe complete all as specified and directed. |
| 71 | Supply and fixing 15mm angle/ stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butterfly handle screwed at two right angles ends for both iron pipe including dismantling in existing complete all as specified and directed. |
| 72 | Supply and fixing bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15mm bore iron pipe complete all as specified and directed. |
| 73 | Supply and fixing bib taps, cast copper alloy, chromium plated, fancy type, screwed down, screwed for 15mm bore iron pipe including dismantling in existing complete all as specified and directed. |
| 74 | Supply and fixing 600mm x 450mm beveled edge mirror of selected quality 6mm thick glass mounted on 6mm thick commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers including fixing arrangement as per approved. |
| 75 | Supply and fixing 18 to 20mm thick granite(of any type) tilesmachine cut, in skirting/dado laid over cementscreed 10 mm thick in CM 1:4 and jointedwith grey cement slurry and pointedwith white cementwith admixture of pigmentto matchthe shade of granite stone includinggrinding and polishing complete all as specified and directed. |
| 76 | Supply and fixing granite (of any type) tiles 20mm thick machine cut laid over cement screed 15mm thick in CM (1:6) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete complete all as specified and directed. |
| 77 | Supply and fixing steel window/ ventilator 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mmand 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a)Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b)Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c)MS tower bolt 150mm long- 2 No per leaf (d)Z section 20mm x 25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 No per leaf (g)Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note:- Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ. |
| 78 | All as per ser item No. 77.00 but gauged shutters without sash bars. |
| 79 | Supply and fixing galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed. |
| 80 | Material and labour for 3mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified and directed. |
| 81 | Material and labour for 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed. |
| 82 | Supply and fixing factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site, complete all as specified and directed. |
| 83 | Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed. |
| 84 | Supply and fixing100mm size stainless steelbutt hinges for fixing to PVC doors complete all as specified. |
| 85 | Supply and fixing 100mm size butt hinges extruded aluminium alloy with mild steel hinge pin anodized and fixed complete all as specified and directed. |
| 86 | Supply and fixing 200mm aluminium anodised, barrel tower bolts of extruded section, fixed with machine screw complete all as specified and directed. |
| 87 | Supply and fixing aluminium anodised bow handles 150mm long, fixed with machine screws complete all as specified and directed. |
| 88 | Material and labour for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 89 | Material and labour for preparation of old painted surfaces of steel of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 90 | Material and labour for mild steel sliding door bolts 250mm long plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 91 | Material and labour mild steel sliding door bolts 300mm long, plate type stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed. |
| 92 | Supply and fixing 20mm gun metal globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed in repairs complete all as specified. |
| 93 | Material and labour for 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning the roof top by scraping down with water etc complete all as specified and directed. |
| 94 | Cleaning the surface and made free of dirt, foreign particle, laitance followed by grinding all protrusion to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expiation contraction. Cutting the grooves with suitable cutter machine in V groove filled with repairs mortar/ micro-concrete/ general purpose grout as recommended proportionally as per recommendation of manufacturer. Making of gollas at all the corners with polymer modified mortar (1:4) cement sand with 3.5% acrylic of cement weight all as specified and directed. Make : Asian Paints/ STP/ Sikka |
| 95 | Supply and applying high build elastomeric waterproofing coating based on pure hydrophobic polyurethane cold applied of spray/ brush applied, membrane with an elongation of 280% and tensile strength of 2.7N/mm2 as per ASTM D 2370, crack bridging ability of 3mm, no leakage upto 5 bars of water pressure as per DIN 1048, min 88% solid content. The system includes final base preparation, epoxy primer 1:1 (Resin : Harder) application with 100% water dilution and pure polyurethane application in 2 coats with a total min consumption of 1.25 Kg/Sqm all as specified and directed. Make : Asian Paints/ STP/ Sikka Note : Application should be done with Graco sprayer by a company authorised applicator. |
| 96 | Antitermite treatment for treating the top surface of filled earth and soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed. |
| 97 | Material and labour for 60mm thick machine pressed precast concrete inter-locking paver blocks any shape and size conforming to IS 15658-2006, M-35 grade, with grey cement andpigment, laid in floor/ path/ hardstandings in any pattern as approved, laid overcomplete all as specified and directed. Note : The sample shall be got approved from the GE before build procurement and lots shall be got tested independently by the GE. |
| 98 | Material and labour for 30mm sand filling under floors or in foundation including watering and consolidation complete all as specified and directed. |
| 99 | Material and labour for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete including necessary form work complete all as specified and directed. |
| 100 | Material and labour for providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chaajas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed Note for serial items No 99 & 100: Cost of formwork required shall be deemed to be included in units rates quoted by bidder. |
| 101 | Material and labour for reinforced concrete pipes 150mm bore, class NP2, laid and jointed complete with collars complete all as specified and directed. |
| 102 | Material and labour for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipe complete all as specified and directed. |
| 103 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified. |
| 104 | Material and labour for Cutting into existing manholes for connecting new drains by cutting out existing benching for forming branch, channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 and making good pipe, and reforming benching as required finishing even and smooth for 150 mm bore pipe complete all as specified. |
| 105 | Cleaning of existing septic tank/ soakage well by taking out complete sludge water, solid brick bats polythene silt etc complete by mechanically by HCV mounted suction is charge machine removing/ depositing the entire retrieved material outside periphery defence land including taking off manholes cover and re-fixing the same after cleaning for the following for connecting the sewer lines to newly constructed manholes complete all as specified and directed |
| 106 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed. |
| 107 | Taking down cement plaster of any description on brick/ stone wall including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 108 | Material and labour for preparation of new plastered or un-plastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm avg thickness wall care putty with primer complete all as specified and directed. |
| 109 | Material and labour for complete removal of existing treatment from wall surface, washing, rubbing down and stopping of distempered and painted surfacesand applying two coat of oil bound distemper over a coat of 1mm avg thickness wall care putty with primer and including filling holes by birla wall putty complete all as specified and directed. |
| 110 | Demolition of cement concrete in ground floor and paving n. exc. 15cm thick (below or above ground level) complete all as specified and directed. |
| 111 | Dismantling structural steel work including door, gates, rolling shutter but excluding framed truss etc complete all as specified. |
| 112 | Supply and fixing rolled mild steel work roof trussed (framed) tubular section or framed, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed. |
| 113 | Material and labour for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed. |
| 114 | Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets as in roof coverings complete all as specified and directed. |
| 115 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screwsall as specified and as directed. |
| 116 | Supply and fixing pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified and as directed. |
| 117 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed. |
| 118 | Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed. |
| 119 | Supply and fixing glazed and skelton shutters factory made 35mm thick open rebatedand prepared to receive glass, gauge etc (without sash bars) edging of framing plain, chamfered or rounded with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24(a) complete all as specified and directed. |
| 120 | Supply and fixing 35mm thick IInd class hard wood plain framed factory made panelled shutters with (2 panel ) of 9mm BWP commercial ply of 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically treated complete all as specified. |
| 121 | Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including a coat of zinc chromate primer complete all as specified and directed. |
| 122 | Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate welded to steel frame/ screwed to wooden frame complete all as specified and directed. |
| 123 | Supply and fixing floor door stopper 150mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed by Engineer-in-Charge. |
| 124 | Dismantling floor, hearth or wall tiling/ china mosaic including cement mortar bedding (but not backing), removing rubbish off outsideMD land complete all as specified and directed. |
| 125 | Demolition and breaking up drain pipes (Salt Glazed ware, AC or PVC) in event n.exc 150mm dia including all fittings complete all as specified and directed. |
| 126 | Material and labour in repair 25mm dia powder coated mild steel curtain rod, fixed with & including MS powder coated hooks/ brackets and decorative finials (at both side), shade as approved by GE complete all as specified including fixing of long size rawl plugs in wall for MS hook fixed complete all as specified and directed. |
| 127 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 128 | Supply and fixing false ceiling with Everest fibre cement designer tile ivory painted (high pressure steam cured) of 4mm thickness (as per IS : 14862) of size 595 x 595mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking meta grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main ‘T’ runner with suitably spaced joints to get required length and 15 x 32mm made from 0.3mm thick sheet and cross ‘T’ of size 15 x 32mm made of 0.30mm sheet, spaced between main ‘T’ at 600mm c/c to form a grid of 600 x 600mm and wall angle of size 15 x 20mm made of 0.30mm thick sheet and laying false ceiling tiles in the grid including, required cutting/ making, opening for services like diffusers, grills, light fitting, fixtures, smoke detectors etc. main ‘T’ runners to be suspended from ceiling using GI soffit cleats fixed to existing rafter, purlin, etc with dash fasteners, GI adjustable rods of 3mm dia with galvanized butterfly level clips, spaced at 1200mm c/c along main ‘T’ bottom exposed width of 15mm of all T-sections shall be center black pre-painted with polyester paint and having a load bearing capacity of 12 Kg/ Sqm complete all as specified and directed. |
| 129 | Supply and fixing in repair sink made of stainless steel 1mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm (minimum) including PVC waste pipe complete all as specified and directed. |
| 130 | Material and labour for aluminium powder coated door shutter having 150mm x 44mm x 2.85mm thick bottom rail, 150mm x 44mm x 3mm thick middle rail 100mm x 44mm x 3mm thick stile and top rail including necessary fittings joinery cleat, glazing packing snap beading 10mm x 10mm, powder coated aluminium handle 200mm long (02 No), 3 Nos 100mm size chromium plated butt hinges, 2 Nos 200mm size aluminium tower bolt and aluminium body hydraulically door closer, designation No-3, universal type, weight between 61 to 80 kg etc including frame of section 100mm x 44mm x 3mm and door shutter, bottom portion covered with 9 mm thick pre-laminated particle board, interior grade, pre-laminated on both sided with decorative choice lamination (colour/design approved by Engineer-in-charge) fixed to aluminium powder coated frame work and top portion covered with 5.00 mm thick float glass and pattern. One mortice lock (Make: Harrison) with shutter and fixing complete all as specified and directed. |
| 131 | Taking down carefully existing point wiring of any type/ any size (i.e. on wooden/ batten/surface conduit/ casing capping or concealed conduit except concealed conduit) complete with wire for light, fan, socket / power point / or any other point etc includingremoving switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for safe custody, refixing of serviceable light, switches, sockets, regulators and for taking credit of unserviceable light, switches/ sockets as per Sch of creditand making good to disturbed surface of walls, roof, floors etc. with any type of civil work involved to match with existing surface complete all as specified and directed. |
| 132 | Material and labour for point wiring for light point with 1.5 Sqmm (nominal area) FRLS PVCinsulated unsheathedmulti stranded copper conductor of size 1.5 Sqmm cabledrawn in and including concealed rigid PVC conduit medium grade (ISI marked) not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and including sunken pressed steel boxes duly painted with anti-corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cupwashers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge |
| 133 | All as per srl item No. 132.00 here-in-before but for one fan point controlled by one switch complete all as specified. |
| 134 | All as per srl item No. 132.00 here-in-before but for one socket outlet 5 Amps on independent board complete all as specified. |
| 135 | All as per srl item No. 132.00 here-in-before but for one socket outlet 5 Amps on the sameboard complete all as specified. |
| 136 | All as per srl item No. 132.00 here-in-before but with 2.5 Sqmm(nominal area) FRLS copper cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathedFRLS cable 1100 volts grade as earth wire connected to common earth and earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge. |
| 137 | Supply and fixing switch piano flush type, 5/6 Amps, 240 Volt AC single pole, one way complete all as specified. Make : As per Group-1 of Appx "B". |
| 138 | Supply and fixing switch piano flush type, 15/16 Amps, 240 Volt AC single pole, one way complete all as specified. Make : As per Group-1 of Appx "B. |
| 139 | Supply and fixing socket outlet 5/6 Amp, 5 pinflush type complete all as specified. Make : As per Group-1 of Appx "B. |
| 140 | Supply and fixingsocket outlet multi purpose 2 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified. Make : As per Group-1 of Appx "B. |
| 141 | Supply and fixing batten holder insulated body with matching colour back plate all as specified and directed. |
| 142 | Supply and fixing LED retrofit lamp 9W, 6500K, 220-240V, B-22 base cap complete all as specified and directed. Make : As per Group-1 of Appx "B. |
| 143 | Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed. Make : As per Group-1 of Appx "B. |
| 144 | Supply and fixing five step fan regulator, socket size, electronic type, single phase,including connection complete all as specified and directed. Make : As per Group-1 of Appx "B. |
| 145 | Material and labour in replacement sub main wiring with PVC insulated cable copper conductor FRLS two run of single core 4 Sqmm drawn through in and including PVC rigid non metallic concealed conduit (medium grade with all fittings) including earth continuity FRLS copper conductor 4 Sqmm PVC insulated with green insulation complete all as specified and directed. Note: Two run of 4 sqmm wire and one run of 4 sqmm wire as earth wire through rigid PVC conduit shall be measured as one RM. |
| 146 | Material and labour in replacement sheet metal DB for MCBs, SPN, 8 ways, double door, IP-43 powder/epoxy coated with bus bar, neutral bar/ connector, earth bar/ connectors, complete with suitable copper conductor wire, PVC insulated, FRLS type with suitable copper thimbles, lugs etc. complete all as specified and directed. Note: MCB"s shall be measured and paid for separately. Make: Ekinox3 of Legrand/ Acti 9 metalic series of Schneider/ Osafe of HPL/ Optipro of Indoasian/ Metallica of Havells or equivalent in makes mentioned under Group-1 of Appx "B". |
| 147 | Supply and fixing MCB SP 6 to 32 Amps, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in makes mentioned under Group-1 of Appx "B" complete all as specified and directed by Engineer-in-Charge. |
| 148 | Supply and fixing MCB SPN 32 Amps, 10 KA, B curve confirming to Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in makes mentioned under Group-1 of Appx "B" complete all as specified and directed by Engineer-in-Charge. |
| 149 | Supply and fixing in replacement Deco ultra slim linear LED lighting fixture with co-extruded polycarbonate body environmental friendly energy efficient ready to use pack20 WLED batten, minimum lumen efficacy 100 lumen/ watt, cool white, 240V 50 Hz complete all as specified and directed by Engineer-in-Charge. Make :As per Group 1 makes of Appx "B". |
| 150 | Supply and fixing energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED for bldg security lights with high lumen efficiency electronic driver BIS approved, having IP-66 protection, efficacy min 110 Lumen per watt complete with GI pipe of 25mm bore and MS clamp duly painted with two coat paint all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 151 | Taking down carefully and refixing ceiling fan of any sweep or make, filling cavities with filler one coat after cleaning, painting the complete fan (as per previous colour) using synthetic enamel paint by spraying including replacement of flexible wire, rubber reel, nut, bolts etc. complete all as specified and directed. |
| 152 | Supply and fixing in repair TPN MCB 63 Amps, 10 KA as per Osafe series of HPL/ Acti 9 series of Schneider or equivalent in makes mentioned in Appx "B" complete all as specified and directed by Engineer-in-Charge. Make :As per Group 1 makes of Appx "B". |
| 153 | Supply and fixing in repair TPN double doorDB 4 way with Bus Bars, Neutral Links, blanking plates suitable for fixing of TPN upto 63A as incommer and MCB for outgoing fixing in wall complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 154 | Supply, laying, jointing and testing XLPE insulated, PVC sheathed galvanised steel strip or wire armoured electric power cable 1100 volt grade (heavy duty) with stranded aluminium conductor of size 16 Sqmm, 4 core laid in trenches, in floor, in duct, through pipes/ culvert or along the pole/wall complete all as specified and directed. |
| 155 | All as per srl item No. 154.00 here-in-before but 10 Sqmm 2 core |
| 156 | Excavation in trenches in hard / dense soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for laying of under ground cable, pole foundation and stays etc and getting out complete all as specified and directed. |
| 157 | Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches and punned down complete all as specified and directed. Note : Punned down thickness of 18cm will be measured. |
| 158 | Supply and fixing 50mm bore galvanised pipe light grade fixed along poles/ to walls/ laid under floor complete with and including fittings and clamps as required complete all as specified and directed. |
| 159 | All as per Srl item No. 158.00 here-in-before but 32mm bore. |
| 160 | Supply and fixing exhaust fan, metallic body AC single phase, 230V of size 300mm sweep with, blades and frame and louvers complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 161 | Supply and fixing exhaust fan, metallic body AC single phase, 230V of size 380mm sweep with, blades and frame and louvers complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 162 | Supply, fixing, connecting and testing wall mounted fan, AC, single phase, 230 volts, 50 C/s, 400mm sweep, oscillating type with speed control complete with all accessories complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 163 | Material and labour for cutting holes for exhaust fan of size 300mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built in line mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:2:4) type B-1 as required, complete all as specified and directed. |
| 164 | Material and labour for cutting holes for exhaust fan of size 380mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built in line mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:2:4) type B-1 as required, complete all as specified and directed. |
| 165 | Earthing complete in replacement with galvanised steel earth plate electrode 60cm x 60cm x 6.0m thick buried directly in ground (each pit not less than 2.25 metres deep below normal ground level) with the top edge of electrode not less than 1.5 metres below normal ground level connected to galvanised earth lead wire 4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron and including GI lead protection pipe of light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, salt all as shown in electrical plate No. 3 of SSR Part-I 2009 connected to earthing point with PCC chamber and RCC cover in (1:2:4) complete with any type of earth work involved all as specified and directed and testing on completion. Notes: (i)If result is not achieved satisfactory, contractor will have to do re-earthing at his own cost. Nothing shall be paid extra on this account. (ii)PCC chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner. |
| 166 | Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amp240 V, B-curve, 10 KA including top plug complete all as specified and as directed. Make :As per Group 1 makes of Appx "B". |
| 167 | Supply & laying old size sub class "B" bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length complete all as specified and directed. |
| 168 | Cutting existing GI tubing of size 20 to 25mm dia in position at two sections for taking new connection including making thread on pipe in position, inserting new Tee provision and fixing of union complete jointing the cut pipe all as specified and directed by Engineer-in-Charge |
| 169 | Supply and installed water cooler having environmental friendly refrigerant R-134a, made of fully stainless steel electric driven (single phase) 230 volts, 50 Hz, having approx. storage capacity of 80 litres and nominal cooling capacity of 40 litres per hour complete all as specified and directed. Make :As per Group 1 makes of Appx "B" |
| 170 | Supply and installed water cooler having environmental friendly refrigerant R-134a, made of fully stainless steel electric driven (single phase) 230 volts, 50 Hz, having approx. storage capacity of 120 litres and nominal cooling capacity of 60 litres per hour complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 171 | Supply and installed water cooler having environmental friendly refrigerant, made of fully stainless steel electric driven (single phase) 230 volts, 50 Hz, having approx. storage capacity of 150 litres and nominal cooling capacity of 150 litres per hour complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 172 | Supply and install refrigerator, double door, inverter technology, electric driven, capacity not less than 310 Litre or next higher capacity availabe in market, steel/ sliver/ grey finish, 3 star, frost free, single phase, 230 volts, 50 Hz complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
| 173 | Supply and install refrigerator, electric driven, direct cool, capacity not less than 185 Litre or next higher capacity avaiable in market, steel/ sliver/ grey finish, 5 star, direct cool, single phase, 230 volts, 50 Hz complete all as specified and directed. Make :As per Group 1 makes of Appx "B". |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
