Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 09-04-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 16-04-2024 |
| 2 | 30-03-2024 | REVISED BOQ | BOQ | 09-04-2024 |
| Sl. No. | Item Description |
| 1 | Dismantling of AC (corrugated or semi corrugated etc.) sheets including ridges in roof coverings complete all as specified & directed. |
| 2 | Dismantling timber scantling, unframed, 40 Sqcm and over in section in any positioncomplete all as specified and directed. |
| 3 | Dismantlingof stone slabs and tiles of any description or thickness in floors, aprons etc,laid dry or laid dry and pointed, complete all as specified and directed. |
| 4 | Dismantlingwrought iron or mild steel workof any description not otherwise provided forcomplete all as specified and directed. |
| 5 | Dismantlingfloor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified & directed. |
| 6 | Demolition of cement concrete of any description (unreinforced) in ground floors and paving not exceeding 15 cms thickness (below or above ground level) including removal of debris to out side MD land complete all as specified & directed. |
| 7 | M&L for Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming Fe-410-(Gde E-250) quality Bcomplete all as specified and directed. |
| 8 | Supply and fix rolled mild steel sections conforming to Fe- 410-W (Gde E-250) quality-A as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails & guides for sliding doors, fixed with angle cleats or other connecting plates etc complete all as specified & directed. |
| 9 | Supply and fix pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150)corrugated steel sheet of any colour having minimum tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws/ L or J type or cranked hook/ bolts as complete all as specified & directed. |
| 10 | S&F of pre-painted galvalume aluminium zinc coating GI based 0.50mm thick(AZ-150) plain steel sheet of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) fixed with self tapping screws complete all as specified & directed. |
| 11 | M&L for mild steel work conforming to Fe-290 Gde -165 as in nosing to steps including embedingin concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed. |
| 12 | M&L for 100 mm thick Cement concrete type D-2, 1:4:8 , using 40 mm graded stone aggregate as in sub base for paver block complete all as specified and directed. |
| 13 | M&L for rubber mould factory made coloured cement concrete chequered tiles with grey cement and pigments 300mm x 300mm x22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in CM 1:6 complete all as specified & directed. |
| 14 | M & L Machine pressed coloured precast concreterubbber moulded interlocking paver block any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade of concrete, laid over and including 50mm thick sand cushioningcomplete all as specified & directed. |
| 15 | M&L for 25 mm thickCement concrete type B-0, 1:2:4(12.5mm graded aggregate)as in sub floor below thekota stone flooring complete all as specified & directed. |
| 16 | M&L for machine cut kota stone slab as in flooring, 20mm thick,over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified & directed. |
| 17 | M&L for Mirror polishing on old marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified & directed. |
| 18 | M & L Granite (Black/Ruby Red ) work (table rubbed and polished)20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointedwith white cement with admixure of pigment tomatch the shade of granite stone including grindingand polishing complete over and including screed bed 15 mm thick in CM 1 : 6complete all as specified and directed. |
| 19 | M&L for glazedceramic coloured tiles 350x250x7mm or 450x350x7mm thick as approved by GE on vertical surfaces such as skirting/ dado, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM (1:4) complete all as specified & directed. |
| 20 | M&L for non-skid joint free coloured ceramic tiles 7-8mm thick (square/ rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified & directed. |
| 21 | S&F in repair 18 mm thick ply , PVC sheetcoloured Prelaminated on one side with approved textureas in kitchen cabinet ( with shelves and partition ) including necessary fittings & fixtures as per manufacturer\"s instrucionscomplete all as specified and directed |
| 22 | Dismantling of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 23 | M&L for brick work with sub class \"B\"fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed. |
| 24 | M&LBrickwork with fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified & directed. |
| 25 | Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed. |
| 26 | M&L for 15mm thick rendering in CM 1:6 oninternal surfaces of wall, finished even and smooth without using extra cement complete all as specified & directed. |
| 27 | M&L for 15MM thick rendering in CM (1:4) on brick or concrete surfaces mixed withliquid water proofing compoundas per Manufacturer\"sinstructions andfinishing the surfaceeven and smooth withoutusing extra cement complete all as specified and directed. ( Note:- WPCwill be measuredand paidfor separately as \"Supply only\") |
| 28 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 29 | M&Lforsuspended false ceiling system using chicago metallic (E grid) exposed supended system, grid section size 600mm X 600mm comprising of GI powder coated Main Runner of dimensions 39 mm X 24mm X 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X24mmX0.8mm thick andwall angle 22.2mmX22.2mmX 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle0.70 kg for 3050mm length) with and including 4mm thick HPSC(High Pressure Steam Cured)non-asbestos fibre cement reinforced multipurpose board,pre-primed , self embossedtextured designer board, water resistant, termite resistantandfire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with butterfly clips(Wt-0.007 Kg/clip)hold down clips (Wt-0.0035 Kg/clip) withand including provision of light fixture complete all as specified and directed. |
| 30 | Refixing onlyoldserviceable ceilingboard of any description including fixing of disturbed angle/Tee, board and suspended wire and fixed in required level in the same or other location complete all as specified and directed. |
| 31 | M&L, Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate, 75 mm thick in plinth protection laid in panels and finished evenand fair including necessary form workcomplete all as specified and directed. |
| 32 | Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed. |
| 33 | Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed. |
| 34 | S& F for Solid PVC mouldeddoor frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening but single prelam PVC sheet used instead of Plain colour PVC sheetas per specification & drawing completeall as specified and directed. |
| 35 | S&F, Factory Made Solid PVC Moulded Door Shutters with wood free EPS 28 to 30 mm thick (stile:), with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core, supplying & fixing in frame at site as per specification & drawing completeall as specified and directed. |
| 36 | M&L for mild steel work conforming to Fe-290 Gde -165 as in hand rail, holdfast,half round or other steel section or core for wooden hand rail strait portion, drilled and countersunk for balusters running bars for doors, nosing to steps including embedingin concrete and screwing etc, wind ties for roof including securing bolts, posts & struts in fencing including cutting top to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc complete all as specified and directed. |
| 37 | M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwoodplain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed. |
| 38 | S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats completeall as specified and directed. |
| 39 | M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed.Notes:- (i) glazing will be measured and paid for separately. (ii)Butt hinge will be measured and paid for separately . |
| 40 | S&F framed work as in iron enclosure, doors or gate of angle iron or other section with gussets plate, rails, braces etc drilled for fixing of steel seating other covering, door etc to be prepared for hanging or sliding with and including either hooks and hinges or steel handing door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing conforming to Fe-290 (Gde-E-165) complete all as specified and as directed.Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts), providing and fiitings angle cleats, fish plates, gusset plate etc., also for welding plumbing, truing up and fixing complete. No claim whatso ever shall be entertained by Govt on this account. |
| 41 | S&F aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed. |
| 42 | S&F for aluminium anodised, barrel tower bolts of extruded section with length of bolt 100 mm and fixed complete all as specified and directed. |
| 43 | S&F forextruded aluminium alloy handles, fabricated type, anodised of size 100 mm complete all as specified and directed. |
| 44 | S&F for extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed. |
| 45 | Butt hinges 100mm, medium weight, cold rolled mild steel, and fixedcomplete all as specified and directed. |
| 46 | S&F, Mild steel barrel tower bolts 200mm size, stove enamelled black, with bright bolt and fixedcomplete all as specified and directed. |
| 47 | S&F, Mild steel pressed handles 150mm size, oval type, stove enamelled black complete all as specified and directed. |
| 48 | S&F, Mild steel sliding door bolts 300mm size, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 49 | S&F, Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller platecomplete all as specified and directed. |
| 50 | S&F for aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300mm and fixed complete all as specified and directed. |
| 51 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed. |
| 52 | S&F steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or weldedcomplete all as specified and directed. |
| 53 | S&F for steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 54 | S&Fmild steel framed work such as grills,gratings etc with ends of bars shouldered and/ or riveted,or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165)complete all as specified and as directed.Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts).No claim whatso ever shall be entertained by Govt on this account. |
| 55 | S&Fstainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads completeall as specified and directed. |
| 56 | S&Fin repair stainless steel wire cloth 0.50 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple/ wooden beads completeall as specified and directed. |
| 57 | M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each panecomplete all as specified and directed. |
| 58 | M&L for preparing newplastered or unplastered surfaces of walls and applying two coats of distemper, oil emulsion,white or tinted,over and including 2mm thick wall care puttyand one coat ofappropriate primer complete all as specified and directed. |
| 59 | M&L for preparation of old decorated surfaces of walls by complete removalof existing treatmentand applying two coat of oil bound distemper (oil emulsion) over and including2mm thick wall care putty over a coat ofappropriate primer on walls complete all as specified and directed. |
| 60 | M&L forpreparation of newexternal surfaces of walls including brooming down and applying a coat of thin layer of wall care putty and two coats of weather proof exterior emulsion paint, over a coat of primer as per manufacturers instructions etc complete all as specified and directed. |
| 61 | M&L forpreparation of complete removal of existingexternal surfaces of walls including brooming down and applying a coat of thin layer of wall care putty and two coats of weather proof exterior emulsion paint,as per manufacturers instructions etc complete all as specified and directed. |
| 62 | M&L for prepartion Surfaces of new wood orwood based materials of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 63 | M&L for prepartion of new steel surfaces of any description not other described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 64 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed. |
| 65 | M&L for preparationof old painted surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint complete all as specified and directed. |
| 66 | Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., includingcleaning or refixing or removal to store (measured overall as fixed along the centre line over fittingsand accessories) complete all as specified & directed |
| 67 | S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in wallscomplete all as specified and directed. |
| 68 | S&F, in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in wallscomplete all as specified and directed. |
| 69 | S&F PVC (SWR) bends ISI marked any radius of 110 mm borewithaccess door complete all as specified and directed. |
| 70 | S&F PVC (SWR) bends ISI marked any radius of 75 mm borewithaccess door complete all as specified and directed. |
| 71 | Supply and fix in repair10 ltr capacity PVC valve less syphonic action type flushing cistern low level \"white\" with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed. |
| 72 | S&F in repair 125mm/ 100mm dia mild steel chromium plated grating fixed on floor trap / nahni trap in Cement mortar 1:6 ,completeall as specified and directed . |
| 73 | Supply & fix vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC \"P\" or \"S\" trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good to floor complete all as specified & directed. |
| 74 | Supply & fix in repairs vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) but plastic water closet seat, black/ white, closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminium hinging device, complete all as specified & directed. |
| 75 | Supply & fix in repairs vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 76 | S&F in repair 15mm bore bib tap fancy type chromium plated cast copper alloy screwed down for iron pipes or for brass ferrule complete all as specified and directed . |
| 77 | S&F in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipes, att as directed . |
| 78 | S&F in repair 15mm bore stop valve/ angle valve fancy type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unionall as specified and directed . |
| 79 | Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 15mm bore of pipe complete all as specified and as directed. |
| 80 | Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 20mm bore of pipe complete all as specified and as directed. |
| 81 | Taking up or down steel tubing and connections, including cleaning for refixing or removing to store of size 25mm bore of pipe complete all as specified and as directed. |
| 82 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsfor 16mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed. |
| 83 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsfor 20mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed. |
| 84 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floorsfor 25mm bore of pipe including Brass elbow, Brass Tee, Male threaded brass adaptor, Female threaded brass adaptor and all necessary fittings etc complete all as specified and directed. |
| 85 | S & F in repairs Towel rail 600 mm longand 20 mm dia brass chromium plated D typefixed with screws and wooden or plastic cleatscomplete all as specified and directed. |
| 86 | Supply & fixed in repairs PVC connection 15 mmsize, 450mm long with PTMT adopter,check nutsand washer on both sides complete all as specified and directed. |
| 87 | S & F in repair 32 mm thick PVC waste pipe of minimum length 1 mtr for kitchen sink and WHB etc complete. |
| 88 | S&F in repair Flush pipes to WC including all joints and making good of all disturbed portion complete all as specified and directed |
| 89 | S&F, in repair, jet spray with 1m PVC tube (stainless steel), chromium plated for vitreous china padestal pattern water closet complete all as specified and directed. |
| 90 | Supply and fixin repair bevelled edge mirror5.0mm thick selected quality glass, 1500mm x 900 mm size, mounted on 6 mm thick AC building board or commercial plywood with aluminium angle bead alround the mirror and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified & directed. |
| 91 | S&F of aluminium powder coated section, as in frame for door, window, ventilators,fix glazing and partitions ofstandard sectionand thickness as directed , cut and jointed together with cadium plated steel screws, plugs for fixing screws, etc. complete all as specified and as directed by the Engineer-in-Charge.Note-(i) Fixing of frame shall be as per manufacturers instructions and all fitting shall be paid under this item. (ii) Thickness of powder coating shall not be less than 50 micron. (iii) Frame shall be one or more rebate as per requirement at site. |
| 92 | Supply andfixing for aluminium alloy(powder-coated) door shutters with hollow aluminiumsections as specified including aluminium powder coated snap type beads, dish type door handles, glazed clip joint cleats, rubber gasket, Mortice lock 4 levers (vertical type), two numbers of aluminium alloy anodized tower bolts 200mm long to each leaf, etc. including fixing frame to wall/RCC members with rawl plugs complete. Sections of doors shall be aluminium hollow sections as follows : - (a)Shutter top 83.50mmx44.45mmx1.87mm thick. (b)Shutter bottom 104.00mmx44.45mmx 1.80mm thick (c)Shutter vertical 83.5mmx44.45mmx1.87mm thick (d)Shutter middle 100.00mmx 44.45mmx 2.00mm thick (e) Gauging clip weighing not less than 0.097kg/metre (Note : 1.The rates shall be inclusive ofprovision of and fixing of rubber packing/gasket. 2. Glass pane shall be measured and paid separately.) |
| 93 | Supply andfixing for aluminium alloy powder-coated) window frame withshutters open able type, with aluminium sections as per of “Jindal” section numbers for casement windows including aluminium alloysnap type beads, handles, aluminium barrel tower bolts and glazing clip, joint cleats, rubber gaskets etc., complete all as specified for series-B “ Jindal” section numbers for casement(a) Section for shutter 47.62x44.45x1.87 mm thick(b)Glazing clip weighing 0.259kg/mtr. (c)Windows shall be provided with 02 Nos. of tower bolt of size 125mm for single leaf shutter and 03 Nos. for double leaf. Handles shall be aluminium ‘D’ type handle of size 98mm and thickness 2.37mm weighing 0.875kg/mtr and 01 No on each openable leaf shall be provided. (Note : 1.The rates shall be inclusive ofprovision of and fixing of rubber packing/gasket. 2.Glass pane and wire gauge shall be measured and paid for separately. |
| 94 | Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge. |
| 95 | S&F 3 mm figured glass, pin head type and glazing with beads fixed with min squares n exc 0.5 sqm in each pane complete all as specified and directed. |
| 96 | S & F Sheet glass 5mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane. |
| 97 | Dismantling of water tank of any description of capacity exc. 250 litres but not exc. 500 litres, removing to store or from the site complete all as specified and as directed. |
| 98 | Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified & directed. |
| 99 | Supply & fixingin repairs frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (SS-202) pipe , stainless steel chain including cutting & necessary welding complete all as specified and directed |
| 100 | Dismantlingpost or strut ( wooden, steel or RCC any type including taking down embeded portion and making good thedisturbedportion to groundcomplete all as specified and directed . |
| 101 | S&F Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., conforming to Fe 290 (Gde E-165) complete all as specified and directed . |
| 102 | M&L for 5 to 10mm dia mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cmbut n exc 10cmlong complete all as specified & directed. |
| 103 | Dismantling ofChain link MS galvanised fencing, any size or type complete all as specified & directed. |
| 104 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified & directed. |
| 105 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified & directed. |
| 106 | S&F, Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified & directed. |
| 107 | M&L for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) in pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and as directed by Engr-in-Charge |
| 108 | M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed by engre-in-charge. |
| 109 | M&L for mild steel TMT bars10 mm dia and overas in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 110 | Concertina coil fencing with Punched tape Concertina coil 800 mm dia conforming to IS:4454 and having 10 m openablelength (total length 90m) having 50 No\"s rounds per 6m lenth, spring core wire(2.5 mm thick) of high tensile strength of 165kg/sq.metrewith tape (0.52 mm thick) and weight 43.478 gm per metre and fixing the same including provisionof necessary GI \"U\" clips fixed in position over boundary wall to angle ironposts/horns complete all as specified anddirected . |
| 111 | Taking down carefully any type of old unserviceable point wiring copper or aluminium conductor (light, fan, socket, bell or power) point complete with fittings such as switches ceiling roses, lamp holders, sockets, fan regulators, call bell, light fittings with PVC conduit surface / concealed or wooden battens including sunken cast iron / pressed steel terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces complete all as specified & directed by Engineer-in-Charge. |
| 112 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed at site. |
| 113 | Taking downexisting exhaust/ ceiling fan of any size/ sweep for keeping the safe custody and re-fixing/ re-hanging the same after repair work or as directed and connecting up the same with & including twin twisted copper flexible wire from ceiling rose to exhaust/ ceiling fan complete all as specified & directed. |
| 114 | Taking down existing old/ unserviceable sub main wiring of any type and description, removal of teak wood batten/ PVC pipe/ PVC casing & caping and making good disturbed surfaces of walls, ceilings etc as per existing complete all as specified and directed. |
| 115 | M&L for provision of sub main wiring with tworuns of single core FRLS PVC insulated, unsheathed, mutistranded copper conductor cable of size 4.0 sqmm drawn in and including rigid PVC conduit medium grade ISI marked not less than 20mm dia with its accessories, concealed type, including one run of single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm as earth continuity and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish complete all as specified & directed.Notes:- (i) Finished sub main wiring with tworuns of 4.0 sqmm cable & one run of 4 sqmm cable alongwith PVC conduit and its accessories shall be measured and paid as one unit length.(ii) Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.(iii) Colour coding for wiring/ bus bar/ main connection shall be followed . |
| 116 | M&L for point wiring with 1.5 Sq mmsingle corePVC insulated unsheathedcopper FRLSH multi stranded conductor cable in andincludingConcealed PVC conduitof size 20/25mm ISImarked inclusive oftees ,bend ,elbows etc upto and including sunk in Anodized pressed steel box for housing switch socket etc withwhite laminated 3 mm thick sheet cover ISI marked of suitable size complete including PVC insulated multi strandedcopper conductor 1.5Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminalinclcutting, chasses and makinggooddisturbed surface to match with existing finish with plaster forcomplete all as specified and directed by Engr-in-charge |
| 117 | (a) One light point controlled by one, one way switch 5 Amps |
| 118 | (b) One fan point/ex fancontrolled by one, one way switch 5 Amps |
| 119 | (c)One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 120 | (d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent boad. |
| 121 | M&L for point wiring concealed type with 2.50sqmm PVC insulated, unsheathed, single core, multistranded copper conductor FRLS cable 1100 volts grade including 1.5sqmm PVC insulated unsheathed multistranded copper conductor FRLS cable as earth continuity conductor drawn through in and including rigid PVC conduit not less than 20mm dia with its accessories, sunken type pressed steel terminal box made of 1.2mm thick MS sheet/ anodised steel box painted with one coat of red oxide primer including 3.0mm thick ISI marked laminated/ ebonite sheet cover for fixing switches/ socket/regulators etc including all fixing accessories and cutting chases as per standard engineering practice & making good the disturbed surfaces as per existing finish for the one socket out let 3/6 pin, 15/16 Amps controlled by one no one way piano type switch on independent board complete all as specified & directed. |
| 122 | M/L for switch socket combination multipin5 and 16 Amps AC 230 volts flush type complete all as specified and directed . |
| 123 | S & F for Switch Piano type single pole 5 amp, 230 Volts complete all as specified and directed at site. |
| 124 | S & F forsocket outlet 2 in 1 , 3 pin, 6 amp, 230 Volts complete all as specified and directed at site. |
| 125 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISImarked for batten fitting complete all as specified. |
| 126 | Supply and fixing in replacement fan regulator modular steptypecapacity of polycarbonite complete all as specified and directed |
| 127 | Supply and fixingSingle phaseceiling fan1200 mm permanent magnet brushless DC Motor 230 v 50 Hz single phase 26-30watt rated current 0.16 amp,pf 0.98 370/360 rpm air delivery 220m3 rated service value 629m3/min/watt no of blades three type of blade leaf 1.05 mm thick aluminium sheet remote control radio frequency 5 speed +off timer option speed regulation class of insulation two nos bearings including connecting wire complete with all as required and directed |
| 128 | Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using bracketswith and including the luminairetesting on completion as per Standard Specification IEC 60598-2-1 / IS: 10322(Parts/Sec-l) complete all as specified and directed , |
| 129 | Supply & fix in replacement ofLED Security Light Luminaire 35 watt 6000K with .high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos ofpole fitting clamps made out of MS flat , nutsand boltsand painting with aluminium paint. complete all as specified and as directed. |
| 130 | Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 8 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. |
| 131 | Supply & Fixing in repair single pole and netural sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed. |
| 132 | S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed. |
| 133 | S & Ffor MCB Single pole rated capacity 5 to 40 Amps, 240 Volts breaking capacity 10 KA, \"C\" curve complete all as specified and as directed |
| 134 | S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. |
| 135 | Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means ofnut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following : - (a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/ Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 136 | S&Fin replacement of sheet steel enclouser distribution boards, double door factory madeVTPN 4 way 3 phase 415 volts 4 way with 200 amps rating copper bus bar and PVC insulatedcopper jumpers of suitable size from the MCCB to the out going circuits, oneincoming MCCB circuit and MCB TP 63 A -02 Nos,MCB SP -04 Nos circuits comprising of 3 phase 4 wire of suitable rating all as specified and directed. |
| 137 | S & F MCCB TP 25 to 100 Amps, 415 Volts, minimum 16 KArupturing capacity and to be housed in VTPN DBs catered here in before complete all as specified and directed . |
| 138 | Supply and fixingSingle phase propeller type ventilating ( Exhaust fan) heavy duty AC 230 volts 300 mmsweep, metallic body complete with Metaliclouversincluding making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan,nut & boltcomplete all as specified and as directed. |
| 139 | Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 9 WATTmade up of Polycarbonate , City-1 , Cylindrical shape , with LED lamp 9 Watt complete with fixing arrangements on wallall as specified and directed. |
| 140 | Supply fixing connecting and testing LED bollard light decorative type with reflector 8-9 wattetccomplete all as specified and directed |
| 141 | 19.S&F in replacement LEDlight fitting square 600 X 600 MMNot less than 36 wattalong with fixtureSurface / Recessed /Pendent mounting LED luminaries with diffuserchannel Luminaires ers, connector block, etc . Complete with all accessories internally pre-wired and including round wood block, connecting up with three coreflexibleflexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge |
| 142 | Supply & fixingintegralpost top lanterns complete with Black ABC plastic spigot, spun aluminium funnel shape with clear acrylic cover light opening on canopy with baffles and accessories with 15 watt LED lamp , GI pipe as required to fixin gate piller complete all as specified and directed . |
| 143 | Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steelstrip or wire armoured, electric power cab les ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 2 core10Sqmm complete all as specified and directed by Engineer in charge |
| 144 | Supply , laying and testing cable XLPE insulated , screened, PVC bedded , galvanized , steelstrip or wire armoured, electric power cables ( Heavy duty ) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 SQMMcomplete all as specified and directed by Engineer in charge.( Note : Excavation and earthwork, sand cushioningand cable protection, if required, shall be measured and paid for separately) |
| 145 | Supply,laying & fixing double wall corrugated (DWC) pipes made of high density polythethyline (HDPE) with all accessories i.e. all type of joints,Sockets,Elbows,bends and End caps etc. , size 50 mm outer dia and 38 mm inner dia complete all as specified and directed. |
| 146 | Excavationin trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, for laying of pipe, cable etc or n. exc.10 Sqm on plan and n. exc. 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any typeof soil complete all as specified and directed. |
| 147 | M/L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 148 | M/L for Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 149 | Supply & fix FRP junction box Size outside dimension 130*180*77 mm,IP66 protection with plain wall for cable of size 10sqmm ,size 126x228x111 (min)including 20mm connetor MCB 6Ampp SP -01 Nos with suitable bus bar arrangements and fix on pole with and including MS clampd out of 25x3 mm MS flat iron,nut bolts etc complete allas specified and directed |
| 150 | Schedule of credit amount of Rs 1,25,290.00to be deducted during AOC |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
