Rural Development And Panchayats Department has published Tender For Construction Of Anganwadi Center With Toilet At Shey Gongma. Submission Date for this Tender is 27-03-2024. Building Work Tenders in Leh Jammu And Kashmir. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | "Earth work in excavation by manual meansin trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal earth is to be levelled and neatlydressed in: All kinds of soil : |
2 | Providing and laying of dry stone soiling of any thickness in horizontal level, hand picked including cost of stones. |
3 | "Providing and laying in position cement concrete of specified gradeexcluding the cost of centring and shuttering- All work upto plinth level with 1:3:6 (1 cement: 3 coarse sand: 6graded stone aggregate 40mm nominal size). Using crushed stone: |
4 | Random Rubble Masonry with hard stone from Nallah in foundation and plinth including levelling up with cement concrete 1:6: 12( 1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) at plinth level with Cement Mortar 1:6 ( 1 cement : 6 coarse sand) |
5 | Providing and laying Damp Proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement: 2coarse sand 4 graded stone aggregate 12.5 mm nominal size). Using Nallah Stone. |
6 | Providing and fixing upto floor five level sun dried brick masonary laid in mud mortar including cost of brick all complete job. |
7 | Providing and fixing upto floor five level precast cement concrete solid block including hoisting and setting in position with cement mortar 1:3 ( 1 cement:3 coarse sand), cost of required centering, shuttering and complete 1:3:6 ( 1 cement : 3 coarse sand : 6bgraded stone aggregate 20 mm nominal size) (A) Crushed |
8 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of cenetring, shuttering, finishing and reinforcement 1:1.5:3.( 1 cement: 1.5 coarse sand: 3 graded crushed stone aggregate 20mm nominal size). |
9 | "Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars. |
10 | Centering and shuttering including strutting, propping etc. and removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
11 | Providing wood work in frames of door & window, clerestory window and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fasteners shall be paid for separately): Fast class kail wood. |
12 | Providing and fixing wood work in frames of false ceiling partitions and joist for roofing etc sawn and put up in position using budloo wood complete job. |
13 | Providing corrugated G.S sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafter and trusses and including cutting to size and shape wherever required. 0.63mm thick with zinc coating not less than 275gm/ m2 |
14 | Providing and fixing 12mm thick plywood for ceiling wall panelling etc including placing in position complete job. |
15 | Filling available excavated earth excluding rock in trenches,plinth , side of foundation etc. Layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead upto 50 m and lift upto 1.5m |
16 | Providing and fixing of ACH Action Tesa for flooring including placing in position all complete job. |
17 | Providing and laying cement concrete flooring using 1:2:4( 1 cement : 2 coarse sand : 4 graded stone aggregate) finished with afloating coat of neatincluding cement including cementslurry but excluding the cost of nosing of steps etc , AllComplete. 50 mm thick with 20 mm nominal size stone aggregate.(A) Crushed. |
18 | 15mm Cement Plaster on rough side of single or half brick wall of mix 1:4 ( 1 cement : 4 coarse sand )All complete Job. |
19 | Distempering with oil boundwashable distemper of approved brand and manufacture to give an even shade new works( two or more coats) over and including priming coat with cement primer |
20 | Providing and fixing Door and window shutter using budloo wood including placing in position all complete job. |
21 | Painting with syntheic enamel paint of approved brand and manufactureof required color to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
22 | Wiring for light point , fan/ exhaust/call bell point/ amp socket point with 1.5 mm FR/PVC insulated copper cable in existing /recessed PVC conduit but without control switch, withoutbox as required. |
23 | Wiring for light /power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 no. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. |
24 | Wiring for 16 amp socket outlet with 2.5 mm FR/PVC insulated copper conductor cable in exisitng recessed PVC conduit including sheet as required |
25 | Supplying and fixing of 1 inch, 3/4 inch PVC conduit capping along the accessories in surface / recessed including cutting the wall and making good the same in case of recessed conduit as required |
26 | Supplying and fixing of 10 amp 240 volt single ploe grid plate mounted switch indicator with molded copper plate including recessed 2 inch MS box complete as required including connection |
27 | Supply and fixing of combined 3 pin 240 volt 20 amp socket outlet with safety shutters and 20 amp 240 volt single pole mounted in recessed includign M.S box complete as required. |
28 | 3 Modular Plate |
29 | 6 Modular Plate |
30 | Supply and fixing the following light fixtures including all accessories like electronic ballasts coms etc, complete as required concealed/ tube lightning20 watt 3000k, round led luminaries as per philips. |
31 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. All complete job. Anodized aluminum (Anodized transparent or dyed to required shade according to IS:1868, minimum anodic coating of grade AC 15) |
32 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides. |
33 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin- charge. (Cost of aluminum snap beading shall be paid in basic item.) With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) .With float glass |
34 | Providing corrugated G.S. sheet roofing includign vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a cost of appproved steel primer and two coats of approved paint on overlapping of sheets complete( Upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafter and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275gm/m2 |
35 | Carriage of stone for RR Masonary from an Avg lead upto 1 km by MT |
36 | Carriage ofSand and stones Aggregatefrom an average lead up to 10 Km by Mechanical Transport. |
37 | Carriage of steel and tor steel frm an average lead up to 10 Km by Mechanical Transport. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail