Public Works Department-PWD has published Construction Of Double Storey Boys Hostel, Vkv Koloriang. Submission Date for this Tender is 21-03-2024. Building Work Tenders in Kurung Kumey Arunachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | SH:- Hostel Block-1 Job |
| 2 | Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m. |
| 3 | Re-filling excavated earth in foundations and plinth etc. in 15 cm layer including ramming and watering etc. complete |
| 4 | Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete. |
| 5 | Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in : a) Foundations and plinth |
| 6 | Providing and laying cement concrete 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) excluding the cost of centring and shuttering in :: a) Foundations and plinth |
| 7 | Reinforced concrete work in foundations, footings, bases of columns etc. and mass concrete excluding cost of centring, shuttering and reinforcement in : a) M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 8 | Reinforced cement concrete work in lintels, beams and bresumers up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but excluding cost of centering, shuttering and reinforcement. a)M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size) |
| 9 | Reinforcement cement concrete work in columns, pillars,post and struts etc up to floor two level including finishing and plastering the exposed surface with cement mortar 1 : 3 (1 cement : 3 fine sand) of thickness not exceeding 6 mm to give a smooth and even surface but exluding cost of centring, shuttering and reinforcement. a)M20 (1 cement : 1.5 coarse sand : 3 stone aggregate 20 mm nominal size). |
| 10 | Providing best available local wood (Class - B II) work in frames of false ceiling, partitions and trusses etc, sawn and put up in position. |
| 11 | Centring and shuttering including strutting, propping etc and removal of form work for : a) Foundation, footings, bases of columns etc. and mass concrete. |
| 12 | d) Lintels, beams, girders, bressumers and cantilevers etc. |
| 13 | e) Column, pillars, posts and struts etc |
| 14 | Reinforcement of RCC work including bending, binding and placing in position complete. b) Tar/TMT steel |
| 15 | Brick work with best available local bricks in foundations and plinth in cementmortar 1:4 (1 cement : 4 fine sand). |
| 16 | Extra for brick work with best available local bricks in superstructure aboveplinth level up to floor two level. |
| 17 | Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth. |
| 18 | Extra for half brick masonry in superstructure above plinth level and up to floor two level. |
| 19 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 20 | Providing and fixing panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws. a) 38 mm thick best available local wood, class - B I. |
| 21 | Providing and fixing 40 x 3 mm flat iron hold fasts 40 cm long including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30 x 10 x 15 cm in 1 : 3 : 6 (1 cement : 3 sand : 6 hard stone chips 40 mm nominal size). |
| 22 | Providing and fixing MS grills of required pattern in wooden frames of windows etc with MS flat, square or round bars with round headed bolts and nuts or by screws. b) Ornamental grill. |
| 23 | Providing and fixing MS sliding door bolts, bright finished or and black enamelled with nuts and screws etc complete a) 300 x 16 mm |
| 24 | Providing and fixing MS tower bolts (barrel type) with necessary screws etc complete a) 250 x 10 mm |
| 25 | Providing and fixing MS handles with necessary screws etc complete. a) 125 mm |
| 26 | Providing and fixing iron pressed butt hinges bright finished with necessary screws etc complete. a) 125 x 65 x 2.12 mm |
| 27 | a) 100 x 50 x 1.90 mm |
| 28 | 12 mm cement plaster 1 : 5 (1 cement : 5 fine sand). |
| 29 | Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade. |
| 30 | Applying one coat of cement primer of approved brand and manufacture on wall surface |
| 31 | Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 32 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 33 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.. |
| 34 | Painting two or more coats (excluding priming coat) with superior ready mixed paint for wood work of approved brand and manufacture in all shades on new work to give an even shade. |
| 35 | Painting one or more coats with superior quality ready mixed paint for steel work of approved brand and manufacture in all shades on old work to give an even shade. |
| 36 | Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand). |
| 37 | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8 mm dia with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead complete, excluding the cost of purlins, rafters and trusses. b) 0.63 mm thick GI sheet |
| 38 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete b) 0.63 mm thick GI sheet |
| 39 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete. |
| 40 | Sub Head: C/o Toilets-1 Job |
| 41 | Brick work with best available local bricks in foundation and plinth in cement mortar 1:3(1 cement : 3 fine sand). |
| 42 | Providing approved best available local wood (Class - B II) work in frames of doors, windows clerestory windows and other frames, wrought framed and fixed in position. |
| 43 | Providing and fixing panelled, glazed or panellednecessary and glazed shutters for doors, windows and clerestory windows including necessary iron butt hinges with necessary screws.(a). 38 mm thick best available local wood, class-B I. |
| 44 | Providing and fixing iron pressed butt hinges bright finished with necessary screws etc complete. (b)100 x 50 x 1.90 mm |
| 45 | Providing and fixing aluminum sliding door bolts anodised transparent or dyed to required color or shade with nuts and screws etc complete. (a) 300 x 16 mm |
| 46 | Providing and fixing aluminum Tower bolts anodized or transparent or dyed to required color or shade with necessary screws etc complete (a) 250 x 10 mm |
| 47 | Providing and fixing Alluminium handleswith necessary screws etc complete. (a)100 mm |
| 48 | Providing corrugated G.I.sheet roofing fixed with galvanised iron J or L hooks, bolts & nuts 8mm dia with bitumen and G.I. limpet washers orwith G.I. limpet washers filled with lead complete, excluding the cost of purlins,rafters and trusses. (b). 0.63 mm thick GI sheet |
| 49 | Providing ridges or hips 60 cm overall in plain G.I. sheet fixed with galvanised iron J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. (b). 0.63 mm thick GI sheet |
| 50 | White washing with whiting on new work (three or more coats) to give even shade. |
| 51 | Distempering (two or more coats) with oil bound washable distemper and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade. |
| 52 | Applying priming coat with ready mixed pink primer of approved brand and manufacture on wood work complete. |
| 53 | Painting two coats with oil type wood preservative of approved brand and manufacture on new work. |
| 54 | Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1:3:6(1 cement:3 sand:6hard graded stone chips/shingle 40mm and down guage) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12mm thick cement mortar 1:3(1 cement:3 fine sand) including shuttering complete. |
| 55 | Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work). (a)15 mm nominal bore |
| 56 | Providing & fixing G.I.pipe complete with G.I. fitting including trenching and refilling etc (external work) b) 20 mm nominal bore |
| 57 | Providing and fixing brass bib cock of approved quality. a)15 mm nominal bore |
| 58 | Making soak pit 2.50 m dia 3 m deep with 45 x 45 cm dry brick honeycomb shaft and SW drain pipe 100 mm dia 1.80 m long complete as per standard design 2.50 mm dia. |
| 59 | Providing and fixing white vitreous china water closet squating pan (Indian type WC pan) size 580 mm with 100 mm and sand cast iron P or S trap, 12.5 Litre high level CI flushing cistern (of approved make) with fittings RS or CI brackets, 32 mm dia galvanized steel telescopic flush pipe with fittings and clamps 20 mm GI over flow pipe with specials and mosquito proof coupling of approved municipal design and GI chain and pull complete including painting of cistern and fittings, cutting and making good the walls and floors where required a) Long Pan patten WC Pan |
| 60 | Providing and fixing a pair of white vitreous china foot rest of standard pattern for squatting pan WC. a) 250 x 130 x 30 mm |
| 61 | Providing and fixing sand cast iron/ cast iron (spun) soil, waste and vent pipes. a) 100 mm dia |
| 62 | a) 50 mm dia |
| 63 | 12mm cemant plaster 1 : 3 ( 1 cement : 4 sand) |
| 64 | Neat Cement Punning |
| 65 | Cenment concrete flooring 1:2:4 ( 1 cement:2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finishing with a floating coat of neat cement. a). 40 mm thick |
| 66 | Making plinth protection 50 mm thick of cement concrete 1 : 3 : 6 ( 1 cement : 3 coarse sand : 6 stone aggregate using 20 mm nominal size) over 75 mm bed of stone ballast 40 mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
