Public Works Department-PWD has published Tender For Construction Of Govt. Higher Secondary School Building At Naroli. Submission Date for this Tender is 18-04-2024. Building Work Tenders in silvassa Dadra And Nagar Haveli. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 03-Apr-2024 | Extended dates | Date | 18-04-2024 |
| 2 | 15-Apr-2024 | Corrigendum 2 | Other | 18-04-2024 |
| Sl. No. | Item Description |
| 1 | Excavation for foundation upto 1.5 m depth including sortingoutandstacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A)Looseorsoftsoil |
| 2 | Excavation for foundation fordepth from1.5 mto3.0 m includingsortingoutandstacking of useful materials anddisposing off theexcavated stuffupto50 Meterlead.(A)Looseorsoftsoil |
| 3 | Filling available excavatedearth (excluding rock) in trenches.plinth, sides of foundations etc. in layers not exceeding 20 cm. in depthconsolidating each dispositedlayer by ramming and watering etc. complete as directed by EIC |
| 4 | Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering, ramming and consolidating etc. complete. as directed by EIC |
| 5 | Filling in plinth with sand under floors including watering ramming, consolidating and dressing completeas directed by EIC |
| 6 | Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S |
| 7 | Providing and laying rubble soling, 230 mm thick, in a compact manner,foudation, road, footpath etc. using 200 to 230 mm. cut size stones including filling the gaps with 40mm metal and packing with stone chips with murrum covering and levelling the surface after filling the voids including watering, ramming well and consolidating each layer, as directed by EIC. |
| 8 | Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- gradedstone aggregates 20 mm nominal size) and curing complete excluding cost of formwork |
| 9 | Providing and laying in position Ready Mixed M-300 grade concrete for reinforced cement conctere work , using cement content as per approved Design Mix manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10 kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Without Fly Ash(Min cement level as per latest IS 456 shall be maintained) (Cement level 475 kg ) in all floors as directed. |
| 10 | Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding and placing in position complete upto floor two level |
| 11 | Extra for additional lift of reinforcing steel for all R.C.C. work above floor two level upto floor four level. |
| 12 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceilingnotexceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (A) Foundations Footings Bases ofColumns etc. and Mass concrete. |
| 13 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. Height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (B) Flat surfaces such as soffits of supspened floors slabs Landings and the like. (1) Floors etc. upto 200 mm in thickness. |
| 14 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (C) Vertical surface such as walls (any thickness) partitions and the like including attached buttresses & string course & the like. |
| 15 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceilingnotexceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (1) Square Rectangular Polygonal in plan. |
| 16 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceilingnotexceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (G) Columns PillarsPosts and struts. (2)Circular or curved inPlan. |
| 17 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceilingnotexceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth. |
| 18 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceilingnotexceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (L) Chullah Hoods,weather shadesChhajjas Corbels etc. including edges. |
| 19 | Providing formwork of ordinary timber planking so as to give a rough finish including centering shuttering strutting and propping etc. height of propping and centering below supporting floor to ceilingnotexceeding 4 M. and removal of the same for in situ reinforced concrete and plain concrete work in. (M) Staircase withsloping or stepped soffits including risers and stringers excluding landing. |
| 20 | Extra foradditional height of propping and centering where the height of propping and centering exceeds 4 .O M between supporting floor to ceiling including temporary brick or stone pillars for supporting as required. (i)Heightmorethan 4.0 M.and upto5.0 M. |
| 21 | Extra for Providing formwork with sheathing steel sheets so as to give a fair finish in (B)Flat surfaces such as soffits of slabs Landings and the like. (1) Floors etc. upto 200mm in thickness. |
| 22 | Providing and laying Brick work using common burnt clay building bricks having crushingstrength not less than 35 kg/Sq. cm.In foundation and plinth incement mortar 1:6 (1 cement : 6 fine sand) (B) Conventional. Up to 1) Plinth level. |
| 23 | Providing and laying Brick work using common burnt clay building bricks having crushingstrength not less than 35 kg/Sq. cm.In Superstructure in cement mortar 1:6 (1 cement : 6 fine sand) (B) Conventional. 2) Ground Floor. |
| 24 | Providing and laying Brick work using common burnt clay building bricks having crushingstrength not less than 35 kg/Sq. cm.In Superstructure in cement mortar 1:6 (1 cement : 6 fine sand) (B) Conventional. 3) First Floor. |
| 25 | Providing and laying Brick work using common burnt clay building bricks having crushingstrength not less than 35 kg/Sq. cm.In Superstructure in cement mortar 1:6 (1 cement : 6 fine sand) (B) Conventional. 4) Second Floor. |
| 26 | Providing and laying Brick work using common burnt clay building bricks having crushingstrength not less than 35 kg/Sq. cm.In Superstructure in cement mortar 1:6 (1 cement : 6 fine sand) (B) Conventional. 5) Terrace Floor. |
| 27 | Providing and laying Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level at any floor level.(B) Conventional. 1) Ground Fl. |
| 28 | Providing and laying Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level at any floor level.(B) Conventional. 2) First Fl. |
| 29 | Providing and laying Half brick masonry in common burnt clay building bricks having crushing strength note less than 35 Kg/Sq. Cm. in cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth level at any floor level.(B) Conventional. 3) Second Floor |
| 30 | Providing & laying10 mm. thick cement plaster in single coat on fair side of brick concrete walls & ceilings for interior plastering upto floor two level and finishingwith smooth mala plaster.(i) Cement mortar 1:3 (1 cement : 3 sand) 1)Ground Fl. |
| 31 | Providing & laying10 mm. thick cement plaster in single coat on fair side of brick concrete walls & ceilings for interior plastering upto floor two level and finishingwith smooth mala plaster.(i) Cement mortar 1:3 (1 cement : 3 sand) 2) First Fl. |
| 32 | Providing & laying10 mm. thick cement plaster in single coat on fair side of brick concrete walls & ceilings for interior plastering upto floor two level and finishingwith smooth mala plaster.(i) Cement mortar 1:3 (1 cement : 3 sand) 3) Second Floor |
| 33 | Providing & laying10 mm. thick cement plaster in single coat on fair side of brick concrete walls & ceilings for interior plastering upto floor two level and finishingwith smooth mala plaster.(i) Cement mortar 1:3 (1 cement : 3 sand) 4) Terrace Floor |
| 34 | Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4sand)Ground Floor |
| 35 | Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4sand)First Floor |
| 36 | Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4sand)Second Floor |
| 37 | Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (ii) Cement mortar 1:4 (1-cement :4sand)Terrace Floor |
| 38 | Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete. |
| 39 | 20mm thick sand faced cement plaster on walls upto height 10metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc. complete. |
| 40 | Providing and laying20 mm thick water proof cement plaster using water proofing powder 1Kg/1bag of cement for all floors on brick / concrete wall work using water proofing materials in C M 1: 4 ( 1 cement 4 coasrse sand) including finishing with a flooting coat of neat cement slurry etc complete for all floor. and shall be guaranteed for minimum period of 10 years after handing over the completed building by the main contractor to be finished as directed. Stamp paper guarantee 10 years to be furnished before receiving any payment from the client. |
| 41 | Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. |
| 42 | Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. For Ceiling |
| 43 | Wall painting (three coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth. For Wall |
| 44 | Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials etc. complete |
| 45 | Providing and fixing flush door both sides laminated and I.T.W. beading all around by usingI.T.W. frame 120 m.m. x80m.m.. shutter fabricated from 35 mm thick solid core malemine faced three layered pre laminated flat pressed wood based exterior grade bonded BWP/BWR synthetic resin having stamped IS 12823 grade I type II includingthree coats oflacquer polishingto exposed wooden surfaces and Stainless steel decorativetype designs fixtures / fastening 2Nos. Handle, 2Nos. Aldrops, towerbolt, hinges etc.including I.T.W. triangular batten patti of size 30m.m.x30m.m.etc. as per architectural detailed drawing and as directed by engineer in charge. |
| 46 | Providing and Fixing,premium quality French uPVC factory made,Colour sliding Three track window of Fenesta make, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of Mosquito net & hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 5 mm Glazing and mouskito net with hardware hinges and fitting etc. |
| 47 | Providing and Fixing,premium quality French uPVC factory made,Coloured Adjustable louvers with box frame of Fenesta make, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100 mm long fasteners, all complete as per direction of Engineer-in-charge. The Rates inclusive of 3 mm thick bajari glass, hardware hinges and fitting etc. |
| 48 | Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick - PolishedGreen Kota (1200 x 600) |
| 49 | Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick - Polished Golden Kota (1200 x 600) |
| 50 | Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick - Leather Finished Green Kota (600 x 600) |
| 51 | Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick - Leather Finished Golden Kota (600 x 600) |
| 52 | Providing and laying polished kota stone tiles10mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.A) PolishedGreen Kota (1200 mm /600 mm length) |
| 53 | Providing and laying polished kota stone tiles10mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.A) Polished Golden Kota (1200 mm /600 mm length) |
| 54 | Providing and laying polished kota stone tiles10mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.A) Leather Finished Green Kota (600 mm length) |
| 55 | Providing and laying polished kota stone tiles10mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.A) Leather Finished Golden Kota (600 mm length) |
| 56 | Providing and laying polished kota stone tiles10mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.A) PolishedGolden Kota (600 x 600) |
| 57 | Providing and laying rough chiseled dressed stone flooring over 20mm average thick base of cement mortar 1:5 (1-Cement: 5-coarse sand) or L.M. 1:1.5 (1-Lime putty: 1.5 - coarse sand) including pointing with cement mortar 1:2 (1-cement: 2-stone dust) etc. complete. (A) 25mm thick |
| 58 | Providing and fixing Pre-galvanised grill of required pattern for windows etc. with precoated galvanised flats at required spacing and frame alround square or round headed bolts and nuts or by screws.including applying a priming coat of red lead paint and two coats of oil painting etc complete(A)Plain grill |
| 59 | Providing and laying 18mm thick Kota Stone of specified size, even thickness, colour, shade and of approved make, cladding , sill and jambs of door, window & ventilation frame withmini. two coat of construction chemical and as per manufacture specification incl. rubbing and polishing, rounding edge and All joints filled with colouredcement putty as per architect detail and wiped to give sharp joints with flush pointing and washed clean with acid As per drawings and design supplied by architect and instruction given by authority and E.I.C. |
| 60 | Providing throating of plaster drip and moulding to R.C.C.Chhajja. |
| 61 | Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs,balconies, terraces etc consisting of following operations: a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300mm height including cleaning the surface before treatment. b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineerin-Charge : (The work shall be carried out through approved specialised agency and shall carry ten years performance guarantee. (Plan area should be measured. No extra payment shall be made for gola, vatas, khurras, water spouts edges etc. ) With average thickness of 120 mm and minimum thickness at khurra as 65 mm. |
| 62 | Providing & laying broken china mosaic flooring on top of integral waterproofing using small broken chips of white/colour glazed tiles set in crazy pattern, as desired by Architect, in cement mortar laid to required slopes and simultaneously filling in remaining top joints in the waterproofing layer and tamped with wooden block to get smooth even surface to required slope, filling the joints with cement grout , cleaning the surface on completion and curing etc. complete. The work sall be carried out in a workman like manner to make the give a guarantee on stamp paper for the performance for a period of ten years.The work shall be measured in square meter of the actual area laid and no extra shall be paid for vatahs, rounding at junction of wall and floor and around water spouts, water outlets etc. |
| 63 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm). |
| 64 | 50 mm thick I.P.S. in cement concrete 1:2:4 laid in levels and grades desired in bays as directed and finished smooth by mala floating including curing, marking of bays with thread as directed etc. complete. |
| 65 | Providing and Fixing Brick Jali with CM 1:4 with 4” wall with 216MM X 60MM X 102MM size brickoF approved make it includeds 8MM to 10 MM groove and 2mm to 3 mm deep. Pointing will be field by Cement Slury. Than after Need to do randering / polishing on wall. After Polishing needto wash wall with Clean water. After a day of washing, need to apply weather coat on wall. After a day Of first coat need to apply second Coat. After 2 days oF fihal Weather Coat need to do water testing on wall etc. complete as directed by EIC. |
| 66 | Providing & fixing 12mm thick toughenedglass door with enox fittings & also with floor spring of enox &Locking system .note:- flooring cutting covered in this item so no extra claim for vitrified / kotah/Granite flooring . |
| 67 | Providing and Fixing Brick Cladding with 1:4 cement mortar on Rough plastered wall with 216MM X 65MM X 18MM size brick tile oF J.J. B. it includeds 8MM to 10 Mm grooveand 2mm to 3 mm deep. Pointing will be field by Cement Slury. Than after Need to do randering / polishing on wall. After Polishing needto wash wall with Clean water. Aftr a day OF wahing need to apply weather coat on wall. After a day Of first coat need to apply second Coat. After 2 days oF final Weather Coat need to do water testing on wall. |
| 68 | Providing & Fixing 65mm thick Ferrocement uneven shape shell work as per design with tor steel 8mm & 10mm dia bars @ 300mm C/C for preparing skeleton then fixing ms welded mesh 100mm x 100mm x 11g one layer & GI chicken mesh 12.5mm x 12.5mm x 26gauge-2 layers with binding wire toms skeleton then rough cement casting in cement sand ratio 1:2.5 by single side & finally both side sand face plaster with cement sand ratio 1.4.etc. complete as directed by EIC. |
| 69 | Providingandfixing 18 mm thick granite urinal partition in single piece in cement mortar 1:1 (1 cement : 1 coarse sand ) and finishing with white cement including polishing on bothsides,finishing edges with round shapeof marble etc. complete. |
| 70 | Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel of size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl. paper tap sand soffit cleat, anchor fastener, scoch bolt connecting cleat, joining compound top coat on ceiling incl. making necessary opening for light fitting, diffuser etc. comp. as per detail drawing as directed |
| 71 | Providing and Fixing 10 mm thick multiwall polycarbonate roofing sheet lexan /bayer UV resistant fixed with hilti screw and rubber silicon sealer and alluminium strip of size 50 mm x 3 mm etc complete As per drawings and design supplied by architect and instruction given by authority and E.I.C. |
| 72 | Providing and Fixing Steelwork required to be galvanised shall be pickled in dilute hydrochloric acid, washed, fluxed and stoved, and then coated with zinc by dippinga bath of molten zlnc. Components shall be immersed ln the bath only For the period sufficient to all Junction. the temperature of the bath and shall be withdrawn at a speed which ensures that a coating of 610 grams per square metre of surface is achieved - i.e. 85 mlcrons minlmum Dry Film Thlckness (OFT). Components shall be covered evenly on all surfaces. Items shall not be galvanised in more than one dip event due to potential warping or additional stresses that may be induced in the metal. Items described as heavily galvanised shall be grit or sand blasted prior to galvanising and shall receive a minimum coating of 1000 grams per square metre of surface - le, 140 microns minimum OFT. Galvanised steelwork shall be cleaned, degreased and etch primed including painting as required by EIC. |
| 73 | Providing and fixing Structural Glazing with using the 17 Micron anodisedof approved colour alluminium section as transium,mulliun of size 63mmX 38mmX2mm with using 6mm thick reflective structural glass of approved make,colour,toughned and shade and fixed with silicone sealant and spacer tap and at corner sealed neoprene foam dust and Air sealed gasket mirred including scaffolding, cleaning of glass etc.complete at all heights and lifts with all necessary fitting and fixtures,anchore fasteners,necessary M.S. or Aluminium brackets,suitable design for openable or sliding window as per Architetural drawing and as directed by Engineer-in-charge.Grooves between the glasses to be filled with sealent of Dow Corning-structural sealant 995,weather sealent 789.The entire facade should be water proof.Measurement shall be given as per actual excution of the work .(Rate are included Providing & Fixing of MS structure steel work when and where requried) |
| 74 | Providing & Laying M250 grade concrete trimix using Rheobuild 823PQ (water reducing concrete admixture at 350 Gram per bag of cement & Master Top 100 Dryshake floor hardner : Dosage 4kg/sq.mtr including making C channel 125 x 125 mm required to maintain level,slope and thickness of the concrete road leveling of placed concrete with surface vibrator and finishing with power floater & trowel light brooming the surface & including cutting & filling of expansion joint as directed by Engineer in charge. |
| 75 | Providing and fixingpre-cast Rubber moulded inter lockingconcrete block 80mm thick with grade of concrete M40 pnumatic compressed by mechanically pressed and as per approved design including 75mm sand layer for levelling and filling the joint with sand in proper line and level etc. complete and including cost of carting of debrises in out side of premises with all lead & lift as directed by engineer in charge. |
| 76 | Providing and Laying Precast in m-250 Kerb Blocks of size 300mm x 300 mm, including necessary excavation, cutting the road, laying PCC 1:4:8 (1 part cement : 4 part sand : 8 part stone aggregate 20/37 mm, down size) 100 mm thick shuttering, exposed rendering, curing and filling bituminious mastic in expansion joint but excluding reinforcement at directed by EIC and as per the details and drawings. |
| 77 | Constructing Under Ground water tank with Providing and laying controlled cement concrete M250 mix for R.C.C. work including reinforcement, boxing, centering, vibrating, curing and mixed with approved water proofing cement compound or "CEMWET" or "PIDICRETE LW" integral water proofing admixture as water proofing agent to be mixed with 50 kgs. bags shall be as recommended by the manufacture of the water proofing material, concrete work for top, bottom slab & side pardi,column, beam for under ground water tank item incl. Necessary excavation & refilling the available earth, 15 cm thk 1:2:4 for bedding of concrete, 20 mm thk. water proofing cement plaster in C.M. 1:3 with smooth finishing & Glazes tile Dedo, vata,50mm thick cement concrete flooring watering etc. Comp. to all face of tank . including locking arrengement outlet, inlet, overflow and washout outlet pipe arrengement as necessary & C.I. Cover 0.60 x 0.45 weight not less then 35 kg with locking arrengment.C.I. steps etc. comp as per structural detail drawing Including thermo Mechanically treated bars (TMT BARS) Fe 500/500D as directed by Eng-in-charge. |
| 78 | Constructing RCC Overhead water tank with Providing and laying controlled cement concrete M250 mix for R.C.C. work including reinforcement, boxing, centering, vibrating, , PVC water stopper, curing and mixed with approved water proofing cement compound or "CEMWET" or "PIDICRETE LW" integral water proofing admixture as water proofing agent to be mixed with 50 kgs. bags shall be as recommended by the manufacture of the water proofing material, concrete work for top, bottom slab & side pardi for Overhead water tank item incl. 20 mm thk. water proofing cement plaster in C.M. 1:3 with smooth finishing & Glazes tile Dedo, vata, watering etc. Comp. to all face of tank . including locking arrangement outlet, inlet, overflow and washout outlet pipe arrangement as necessary & C.I. Cover 0.60 x 0.45 weight not less then 35 kg with locking arrangement. etc. comp as per structural drawing Including Reinforcement TMT-FE500D As per drawings and design supplied by architect and instruction given by authority and E.I.C. |
| 79 | Construction Septic tank inside dimention of 6 m in length & 3 m in width & 3 m depth including excavating any type of soil as shown and mentioned in the drawing,providing and laying 0.10 m thick plain cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone agg.) 40 mm thick IPS flooring at bottom with brick masonary 0.23 mthick walls CM 1:5 ( 1 cement : 5 coarse sand ) and intermediate partition CM 1:4 & RCC Top slabs12 cms thick in1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg) including reinforcement as per designand 15 mm thick cement plaster in CM 1:4 with floating coat of neat cement slurry inside, top and around tank below 15 cm on ground level, Also provide Two nos CI Manhole frame and cover of size 60 cm x 45 cm & 75 mm dia. PVC 6 kgf / Sq cm pressureair vent pipe in 3.00 length with cowl etc complete as per direction of Engineer in charge. |
| 80 | Rolling and Consolidating of soling including filling in depression which occurs during the process with power roller 8 tonne to 12 tonne. and compacting the bed as per specifications to core test 97% compacting complete in all respects to the entire satisfaction of the Engineer-in -charge. |
| 81 | Providing and laying compacted W.B.M. 150,mm compacted thick of machine crushed B.T.,Metal of size 40 MM to 63 MM with using 20%, stone screenings (Grit ) and stone dust as ,filler including spreading , watering and ,consolidation by vibratory roller etc. complete. |
| 82 | Providing ,laying, spreading, and compacting ,graded stone aggregates to wet mix Macadam,150 mm compacted thick as per MORT & H ,Specification including premixing the ,material with water at OMC in mechanical ,mix plant, carriage of mixed material by ,tippers to site, laying in uniform layers with,paver in sub base/base course on well ,vibratory roller to achieve the desired, density. |
| 83 | Providing and applying primer coat with bitumen VG 3060/70 Grade on prepared surface of granular base including clearing of road surface and spraying primer at the rate of1 kg /1 sqm using mechanical means. |
| 84 | Providing and laying 50 mm Thick Bitumious Mecadam B.T. Aggregate as per MORT & H specification andasphalt for tack coat @ 2.50 Kg./10 smt. with Mechanical sprayer & Bitumen Grade VG-30 ) for mixing @ 40 Kg./Mt. i.e. 4 % by weight of total mixincluding heating and mixing the aggregate & asphalt in continuous batch mix plant and spreading the same by sensor paver finisher & consolidation with vibratory roller including providing all materials equipments, tools & plant, fire wood, oil, kerosene, labour charges etc. complete using contractor’s own machinery drum mix plant & paver finisher etc. complete |
| 85 | Providing and laying 40 mm thick bitunenous concrete (BC) using B.T. stone chipping and aggregate as per Morth&H gradation and asphalt for tack coat @ 2.5 kg kg/10 smt on B.T. surfaces and butumine grade 80/100 for mixing @ 60 kg / M.T. by weight of total mix i.e. (6.0 % by weight of total mix) including heating and asphalt and aggregates by continuous batching batch mix plant and spreading the same by paver finisher including rolling and consolidation with 10-12 tonnes vibretory and power roller including flushing sand @ of 0.03 cumt/10smt and providing all materials, equipment, tolls and plants, fire wood, oil:, kerosene, labour charges etc. and using contractor"s own machineries drum mix plant and paver finisher etc. complete. |
| 86 | Supply & Installation of synthetic all weather acrylic material approved by International Tennis Federation (ITF) having seven (7) layers 1 Coat of Acrylic Resurface189.3 ml to 264.979 ml per square meter (0.05-0.07 gallon per square yard) per coat 2 Coats of acrylic latex coating containing specially graded, large rubber Particles 723 ml to 769 ml per square meter (0.016 to o.017gallon per square yard) 1 Coats of acrylic latex coating containing the rubber aggregates for a Smooth cushion finish 452 ml to 542 ml per square meter ( 0.10 to o.12gallon per square yard) 2 coats of coloue with silica sand for texture 1 coat of Color 180 ml to 226 ml per square meter (0.04-0.05gallon per square yard) per coat And 1 coat of White Stripping Paint for game line marking |
| 87 | Filling in Red soil as aproved by engineer in charge For Red Soil layers in including watering, ramming and consolidating and achieving required density soil must have property of not eroding ,holds water and soft. The rate includes all labour and machinary and spreading in layers and transportation complete. |
| 88 | Grassing with selection No.1 grass In rows 5 cm apart in both directions including watering and maintenance of the lawn for 3 months or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying farm clay up 300 mm thick, sludge, manure,pesticides , extra earth, disposal of rubbish, trench excavation and all labour with lead and lift etc. complete as directed by EIC. |
| 89 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (A) ARECA PALM 1.5MT |
| 90 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (B) CALATHEA LUTEA1.5MT |
| 91 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. © HYMENOCALLIS (SPIDER LILY0.3MT |
| 92 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (D) HEMIGRAPHIS COLORATA0.3MT |
| 93 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (E) ALPINIA VARIGATED0.6MT |
| 94 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (F) CANNA STUTTGART (VARIGATED + YELLOW FLOWERS1MT |
| 95 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (G) RHAPIS1.5MT |
| 96 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (H) PHILODENDRON HEDERACEUM VAR0.3MT |
| 97 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (I) RHOEO0.3MT |
| 98 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (J) ALOCASIA1MT |
| 99 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (K) PHILODENDRON XANADU0.9MT |
| 100 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (L) HELICONIA METALLICA1MT |
| 101 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (M) PETRA CROTONS1MT |
| 102 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (N) BIRD OF PARADISE (ORANGE)1MT |
| 103 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (O) FERN0.3MT |
| 104 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (P) CRINUM LILY GREEN0.6MT |
| 105 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (Q) CRINUM LILY RED0.6MT |
| 106 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. ® ALPINIA PURPURATA0.6MT |
| 107 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (S) SYNGONIUM0.3MT |
| 108 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (T) SPIDER GRASS0.3MT |
| 109 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (U) FOUNTAIN GRASS0.6MT |
| 110 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (V) ZEPHYRANTHES CANDIDA0.2MT |
| 111 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (X) HELICONIA LADY BIRD1MT |
| 112 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (Y) DIEFFENBACHIA SEGINE1MT |
| 113 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (Z) RUSSELIA0.6MT |
| 114 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (AA) WEDELIA0.15MT |
| 115 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (AB) RAVENALA MADAGASCARIENSIS / TRAVELER PALM 1.8MT |
| 116 | Providing &Plantingof Deep rooted Tree plants required Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with goodearth with mixing of cow dong and pesticide.planting the following plant upto 6" height stack it well, maintain it for 3 month name of plantsas below etccompleted as dircted by E.I.C/PMC. (AC) KENTIA PALM1.5MT |
| 117 | Providing &Plantingoftrees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of cow dong and pesticide.planting the following plant of 8" to 10" height stack it well, maintain it for 3 month as below etccompleted as dircted by E.I.C/PMC. TERMINALIA TREE 3.0MT |
| 118 | Providing &Plantingoftrees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of cow dong and pesticide.planting the following plant of 8" to 10" height stack it well, maintain it for 3 month as below etccompleted as dircted by E.I.C/PMC.LAGERSTROMIA SPECIOSA TREE 2.7MT |
| 119 | Providing &Plantingoftrees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of cow dong and pesticide.planting the following plant of 8" to 10" height stack it well, maintain it for 3 month as below etccompleted as dircted by E.I.C/PMC.WHITE AMALTAS TREE 3.0MT |
| 120 | Providing &Plantingoftrees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of cow dong and pesticide.planting the following plant of 8" to 10" height stack it well, maintain it for 3 month as below etccompleted as dircted by E.I.C/PMC.FILICIUM DECIPIENS 2.4MT |
| 121 | Providing &Plantingoftrees Digging of pits 0.6mt. x 0.6mt x 0.6mt, filling with good earth with mixing of cow dong and pesticide.planting the following plant of 8" to 10" height stack it well, maintain it for 3 month as below etccompleted as dircted by E.I.C/PMC.WHITE CHAMPA 2.4MT |
| 122 | Pitch Construction 1st Layer Supply and Laying compacted layer by using palte vibratorof8”good quality and approved Ballast (stones) 9" Layering, on it put some dug up soil (as per approved sample) supply of all labour,also includes dressing leveling of trench . |
| 123 | 2nd Layer 9" Layer Two BRICK LAYER with 1" Spread charcol/fine sand filling |
| 124 | Pitch Construction 3rd Layer- Supply & laying compacted layer by using palte vibratorof8”good quality and approved Soil Mixture Black/clay soil (1 part), Red soil (1 Part), Morrum (1 part) 9" Layer.(as per approved sample)suplly fo all labour also includes dressing leveliing of tranch 82ftx100ft |
| 125 | Pitch Construction 4th Layer- Supply & laying compacted layer by using palte vibratorof8”good quality and approved Soil Mixture Black/clay soil (1 part), Red soil (1/2 Part), Morrum (2 part), Manure (2 Part) 3" Layer.(as per approved sample) suplly fo all labour also includes dressing leveliing of tranch 82ftx100ft |
| 126 | Pitch Construction 5th Layer- Supply & laying compacted layer by using palte vibratorof8”good quality and approved Layer of fine grass. on it put rich mixture of soil Black/Clay soil(1 Part), Red soil ( 1/2 part), Morrum (2 part), Manure (2 Part). with compacted in 6” layers along with the using scratching by panja and using plate vibrator x 4 times (as per approved sample) with water spreay , labour withproper grinding & shorting , dressing & levelling of pitch as per desired level and compaction, quality of Black/clay soil, Red soil, Morrum, Manure shall be-as per BCCl Norms supply of all labour, T & P etc and also includes dressing leveling of trench 1. Have good hydraulic conductivity. 2. Swell and shrink well, cracks to allow water and air to penetrate deep and regenerate. 3. Retain moisture. 4. Encourage grass recovery. 5. PH Value shall be 7-8. 6. Crushing strength -0.8-1.6 MPA. 7. Cracking pattern –breaking in to 2-5 pcs. 8. Linear shrinkage- 8-15 preferably 10 9. Dispersion – between 0 & 8 10. Sodium content-,<3% 11. Organic matter-<5%. |
| 127 | Supply & layinglsl 110 MM PVC Pipe (underneath) around the Pitch Square with a gradient of 1:100 Feet and connected to the main outward Drainage system through PVC /4” dai Pvc perforated pipe (perforation at half of the pipe at top level), wrapped with geo-fabric cloth, covered by stone granules, sand etc and at any one direction along with the desired slope ratio. connected with boundary storm water drain line. |
| 128 | Supply & layinglsl 150 MM PVC Pipe plain connect to main strom water line with pitch block rain water drain line. |
| 129 | Cutting for Ground - 200 MM :The work comprises of excavating the ground to the required depth as per the survey layout plan and requirements , reconstructing the same within the specified time with the treatment as per the specifications and levels given in the enclosed drawing and dressing the excavated earth as per the directions and levels. |
| 130 | Sandy loom soil 8” thick:first 4” layer than 2” x 2 layers each 4”& 2” layer 4” by vibro roller and next layers by plate vibrator first 4” layer req. compaction by vibro roller in dry and wet form and next layer req.in 2”only statics rolling in form of layer by plate vibrator. |
| 131 | Synthetic Athletic Track Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50 Mt.lead. |
| 132 | Providing and laying 14mm thick full syntetic runningtrack with 3mm EPDM and 11mm SBR surface bonded together including lane separatar lines and markingall complete as per the reqiurements specificationlaid down by IAAF and contractor has to procure IAAF certification class-II for the same as direction of the engineer-in- charge. |
| 133 | High Stress Area with a minimum thickness of 20mm of finished track surface. 15 mm SBR + 5 mm EPDM Granules. |
| 134 | Providing & laying R.C.C.storm water drainfor dischargeof waste from track Including Providing and LayingC.C. M. 200 Bottam Raft& Vertical Pardi includinginside & Outside ofcentering & shuttering and reinforcement & surface, plaster smooth finish incl. 50mm perlocated precast Cover & Including Excavation & bottam P.C.C. in Ordinary Cement Concrete 1:2:4etc. comp. with reinforcement as directed. Minimum Inside Diamension of R.C.C. Draine 450 mm x 450 mm Clear in to in diamension and Directed by Engineer in Charge. |
| 135 | Discus Throwing Circle/Ring without Throwing safety cages with required poles net incl. the ground fixing sleeves and ground hooks etc. for Discus and Hammer Throw. The product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 136 | Hammer Throwing Circle/Ring with Throwing safety cages with required poles net incl. the ground fixing sleeves and ground hooks etc. for Discus and Hammer Throw. The product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 137 | Shot Put Throwing Circle/Ring without Throwing safety cages with required poles net incl. the ground fixing sleeves and ground hooks etc. The product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 138 | Take of boards alongwith plasticine indication Boards and Blanking Boards for Long Jumps including installation as directed by E.I.C.. The product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 139 | Take of boards alongwith plasticine indication board and Blanking Boards for triple jump including installation as directed by E.I.C. The product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 140 | Stop board for shot put including installation as directed by E.I.C. The product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 141 | Aluminum fixing arrangement to fix hurdles for water pit/jump in steeple chase along with adustable hurdlewith water pitThe product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 142 | Pole Vault Box including installation as directed by E.I.C. The product should be IAAF approved as per IAAF"s latest certified competition equipment list. |
| 143 | Providing and laying 400mtr length alluminum curbing IAAF approved make etc. Completeas directed by EIC |
| 144 | Starting Block;(IAAF Certified. Centre rail made of special 75 mm slotted aluminium channel with ribs to slip in anchor plates ensuring high ground stability. Heavy aluminium paddles with thick rubber pads. Rust proof plates with spikes to hold the starting block on synthetic tracks / cinder tracks.) |
| 145 | 1.0 mm thick Salem stainless steel AISI -304 & IS 13983-1994kitchen sink of approved make as per Engineer-in-chargewith large waste coupling. 45 x 20 x 8 20x16x8 (with drain board) |
| 146 | P & F Bottle Trap of approved make : C.P Brass 40 mm |
| 147 | P& F waste Coulping with fittings of approved quality /make: C.P Brass 40 mm dia |
| 148 | P.V.C. with C.P. nut 40 mm dia |
| 149 | P&F uPVC SWR pipes Type B for soil and waste discharge system (IS 13592 :1992) of approved make 75 mm dia |
| 150 | P&F uPVC SWR pipes Type B for soil and waste discharge system (IS 13592 :1992) of approved make 50 mm dia |
| 151 | P&F uPVC SWR pipes Type B for soil and waste discharge system (IS 13592 :1992) of approved make 100 mm dia |
| 152 | P&F uPVC SWR pipes Type B for soil and waste discharge system (IS 13592 :1992) of approved make 150 mm dia |
| 153 | P&F uPVC SWR pipes Type B for soil and waste discharge system (IS 13592 :1992) of approved make (For Rain Water) 100 mm dia |
| 154 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Coupler 75 mm dia |
| 155 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make 50 mm dia |
| 156 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make 100 mm dia |
| 157 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make 150 mm dia |
| 158 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Repair Coupler 75 mm dia |
| 159 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Repair Coupler 100 mm dia |
| 160 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Repair Coupler 150 mm dia |
| 161 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Repair Coupler Single Push fit coupler 75 mm dia |
| 162 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Repair Coupler Single Push fit coupler 100 mm dia |
| 163 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Repair Coupler Single Push fit coupler 150 mm dia |
| 164 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved makeBend 45 Deg 75 mm dia |
| 165 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved makeBend 45 Deg 50 mm dia |
| 166 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved makeBend 45 Deg 100 mm dia |
| 167 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved makeBend 45 Deg 150 mm dia |
| 168 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Single Y75 mm dia |
| 169 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Single Y 100 mm dia |
| 170 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Double Y75 mm dia |
| 171 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Double Y 100 mm dia |
| 172 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Double Y with door100 mm dia |
| 173 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Socket Plug75 mm dia |
| 174 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Socket Plug100 mm dia |
| 175 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Pipe clip75 mm dia |
| 176 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Pipe clip100 mm dia |
| 177 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Pipe clip150 mm dia |
| 178 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Single Tee 75 mm dia |
| 179 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Single Tee 100 mm dia |
| 180 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Single Tee 150 mm dia |
| 181 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Multi Floor Trap110 mm dia |
| 182 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Extra square jali110 mm dia |
| 183 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Vent cowl75 mm dia |
| 184 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Vent cowl110 mm dia |
| 185 | P&F uPVC SWR pipe fittings Type B for soil and waste discharge system (IS 13592 :1992) of approved make Vent cowl150 mm dia |
| 186 | Construction of manhole in all type of soil inner size 900 X 600 mm 450 mm thick masonary in CM 1:6 10 cm, thock cement concrete 1:5 10 in foundation 20 mm thk inside plaster in CM 1:6 finished with floating neat cement 50 mm thk M15 grade CC flooring making channels 80 mm thk stone slab covering with 40 mm thk M15 grade CCflooring cement cover with frame of 450 mm dia earthwork etc complete as per design including disposal of surplus earth within 50 m lead Depth up to 0.5 m |
| 187 | Construction of manhole in all type of soil inner size 900 X 600 mm 450 mm thick masonary in CM 1:6 10 cm, thock cement concrete 1:5 10 in foundation 20 mm thk inside plaster in CM 1:6 finished with floating neat cement 50 mm thk M15 grade CC flooring making channels 80 mm thk stone slab covering with 40 mm thk M15 grade CCflooring cement cover with frame of 450 mm dia earthwork etc complete as per design including disposal of surplus earth within 50 m lead Depth up to 0.9 m |
| 188 | Construction of manhole in all type of soil inner size 1500 X 1200 mm 450 mm thick masonary in CM 1:6 10 cm, thock cement concrete 1:5 10 in foundation 20 mm thk inside plaster in CM 1:6 finished with floating neat cement 50 mm thk M15 grade CC flooring making channels 80 mm thk stone slab covering with 40 mm thk M15 grade CCflooring cement cover with frame of 450 mm dia earthwork etc complete as per design including disposal of surplus earth within 50 m lead Depth up to 1.5 m |
| 189 | Construction of manhole in all type of soil inner size 1500 X 1200 mm 450 mm thick masonary in CM 1:6 10 cm, thock cement concrete 1:5 10 in foundation 20 mm thk inside plaster in CM 1:6 finished with floating neat cement 50 mm thk M15 grade CC flooring making channels 80 mm thk stone slab covering with 40 mm thk M15 grade CCflooring cement cover with frame of 450 mm dia earthwork etc complete as per design including disposal of surplus earth within 50 m lead Depth up to 2.2 m |
| 190 | Construction of manhole in all type of soil 300 mm thick masonary in CM 1:6 10 cm, thick cement concrete 1:5 10 in foundation 20 mm thk inside plaster in CM 1:6 finished with floating neat cement 50 mm thk M15 grade CC flooring earthwork etc complete as per design including disposal of surplus earth within 50 m lead size 600 X 450 mm depth 0.5 to 1 m |
| 191 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 15 mm nominal outer dia pipes |
| 192 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal outer dia pipes |
| 193 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)25 mm nominal outer dia pipes |
| 194 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)32mm nominal outer dia pipes |
| 195 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 32mm nominal outer dia pipes |
| 196 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 40 mm nominal outer dia pipes |
| 197 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 50 mm nominal outer dia pipes |
| 198 | P & F Pilllar Cocks (IS :8934 Mark) of superior quality and approved make C.P. Pillar cock Elbow action, 15 mm nominal bore. |
| 199 | C. P. Brassswan - neck, 15mm nominal bore. Long body, 15mm nominal bore weight not less than 690 gm |
| 200 | P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. |
| 201 | P & F Sink Cocks of superior quality & approved made : C.P. Sink cock swinging spout 15mm. |
| 202 | P&FFlushCock / FlushValve IS :9758Mark)forWCofapproved quality make :concealed 32mm nominal bore. |
| 203 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : 32mm nominal bore. |
| 204 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make : 40mm nominal bore. |
| 205 | P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :50mm nominal bore. |
| 206 | C.P. wall mixer telephonic type crutch & telephonic shower. |
| 207 | P & F Divertors of superior quality and approved make: Two way with 22Cm. Pipe flange |
| 208 | P & F PVC Storage Tank ISI Marked (IS : 12701) indicating theBIS license No),of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design:5000 Ltrs |
| 209 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : (A) 150mm dia Internal |
| 210 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : (B) 200mm dia Internal |
| 211 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : © 250mm dia Internal |
| 212 | Providing, Laying & Jointing R.C.C. class NP-2 Non-Pressure pipes (IS : 458mark) of approved make with collars, jointed with C.M. 1:2 or having Spigot and socket ends with flexible rubber rings joint including testing of joints etc. complete : (D)300mm dia Internal |
| 213 | Providing & Fixing C.P Brasshand faucet with 8 mm dia 1 mtr long flexible tube and wall hook etc completed as directed by E.T.C/PMC . |
| 214 | Providing and fixing C.P. brass 18" long 2-tier Towel railcomplete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws at any floor, level and height etc completed as directed by E.T.C/PMC . (B) 600mm x 20 mm size |
| 215 | Providing & fixing S.S. grade 304 Soap dish holderetc completed as directed by E.T.C/PMC . |
| 216 | Providing & fixing Toilet paper holder for handicappedtoiletof approved quality, as recommended by theetc completed as directed by E.T.C/PMC . |
| 217 | Testing verticality of tube-well by plumbing system and yield test and draw down test by pumping system as per IS: 2800 (Part II) 1979. |
| 218 | Supplying and installation of submersible pumping motor pump sets I.S.I. Marked (IS : 8034-1989 ) of approved make like K.S.B., KIRLOSKAR, Calama etc. or equivalent, making connection suitable for T.W./D.C.B./Open well. The job includes screwing and welding offlanges on G.I. riser pipes, installation of complete fitting and accessories, with riser pipes, jointing of electrical cables and other connections making switch board electrical connections, all labour for testing of submersible pump set and supply of water to water mains, complete in all respect. The cost shall be inclusive or starter panel. |
| 219 | Supplying and installation of submersible pumping motor pump sets ( For IRRIGATION )I.S.I. Marked (IS : 8034-1989 ) of approved make like K.S.B., KIRLOSKAR, Calama etc. or equivalent, making connection suitable for T.W./D.C.B./Open well. The job includes screwing and welding offlanges on G.I. riser pipes, installation of complete fitting and accessories, with riser pipes, jointing of electrical cables and other connections making switch board electrical connections, all labour for testing of submersible pump set and supply of water to water mains, complete in all respect. The cost shall be inclusive or starter panel. |
| 220 | Excavation for foundation upto 1.5 m depth including sortingoutandstacking of useful materials and disposing off the excavated stuff upto 50 Meter lead.(A)Looseorsoftsoil |
| 221 | Excavation for foundation fordepth from1.5 mto3.0 m includingsortingoutandstacking of useful materials anddisposing off theexcavated stuffupto50 Meterlead.(A)Looseorsoftsoil |
| 222 | Providing and laying cement concrete 1:4:8 (1- Cement : 4- coarse sand : 8- hand broken stone aggregates 40 mm nominal size) and curing complete excluding cost of formwork in (A) Foundation and Plinth |
| 223 | Providing and laying controlled cement concrete M.150 forcuring complete excluding cost of formwork and reinforcement for reinforced concrete work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and Cantilever upto floor two level |
| 224 | Providingfinishing with a floating coat of neat cement slurry. |
| 225 | Providing Jhama brick blast 50 mm |
| 226 | Providing Jhama brick blast 10 mm |
| 227 | Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (D) 75mm thick |
| 228 | Providing and fixing Iron Foot Rest of 16 mm dia |
| 229 | 150 mm dia RCC spun pipe upto 3.0 meter depth of invert below G.L |
| 230 | Providing and fixing HCI bend 100 mm dia |
| 231 | Providing and fixing HCI Cowel 100 mm dia |
| 232 | Providing and fixing 100 mm dia HCI Pipe |
| 233 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 1 - Model No: CNS-WHT-705 |
| 234 | Providing and fixingSanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 1 - Model No: FLR-CHR-5041N |
| 235 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: CNS-WHT-961SPP |
| 236 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: ALD-CHR-081 |
| 237 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: FLR-CHR-5083NK |
| 238 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: FLR-CHR-5053N |
| 239 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: ALD-CHR-573 |
| 240 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: ECS-WHT-451 |
| 241 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: ALD-CHR-081 |
| 242 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: FLR-CHR-5083NK |
| 243 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: FLR-CHR-5053N |
| 244 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: ALD-CHR-573 |
| 245 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: WAC-SAP-BG0800CS |
| 246 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: WAC-SAP-BR0600CS |
| 247 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: URS-WHT-13261 |
| 248 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 1 - Model No: PRS-CHR-077 |
| 249 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 2 - Model No: CNS-WHT-705 |
| 250 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 2 - Model No: FLR-CHR-5041N |
| 251 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 2 - Model No: CNS-WHT-961SPP |
| 252 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 2 - Model No: ALD-CHR-081 |
| 253 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 2 - Model No: FLR-CHR-5083NK |
| 254 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent)BOY"S TOILET 2 - Model No: FLR-CHR-5053N |
| 255 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: ALD-CHR-573 |
| 256 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: ECS-WHT-451 |
| 257 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: ALD-CHR-081 |
| 258 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: FLR-CHR-5083NK |
| 259 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: FLR-CHR-5053N |
| 260 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No:ALD-CHR-573 |
| 261 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: WAC-SAP-BG0800CS |
| 262 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: WAC-SAP-BR0600CS |
| 263 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No: URS-WHT-13261 |
| 264 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) BOY"S TOILET 2 - Model No:PRS-CHR-077 |
| 265 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: CNS-WHT-705 |
| 266 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: FLR-CHR-5041N |
| 267 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: CNS-WHT-961SPP |
| 268 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: ALD-CHR-081 |
| 269 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: FLR-CHR-5083NK |
| 270 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: FLR-CHR-5053N |
| 271 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: ALD-CHR-573 |
| 272 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: ECS-WHT-451 |
| 273 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: ALD-CHR-081 |
| 274 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: FLR-CHR-5083NK |
| 275 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: FLR-CHR-5053N |
| 276 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: ALD-CHR-573 |
| 277 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: ACN-CHR-1161N |
| 278 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: WAC-SAP-BG0800CS |
| 279 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 1 - Model No: WAC-SAP-BR0600CS |
| 280 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: CNS-WHT-705 |
| 281 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: FLR-CHR-5041N |
| 282 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: CNS-WHT-961SPP |
| 283 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: ALD-CHR-081 |
| 284 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: FLR-CHR-5083NK |
| 285 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: FLR-CHR-5053N |
| 286 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: ALD-CHR-573 |
| 287 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: ECS-WHT-451 |
| 288 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: ALD-CHR-081 |
| 289 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: FLR-CHR-5083NK |
| 290 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: FLR-CHR-5053N |
| 291 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: ALD-CHR-573 |
| 292 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: ACN-CHR-1161N |
| 293 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: WAC-SAP-BG0800CS |
| 294 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) GIRLS TOILET 2 - Model No: WAC-SAP-BR0600CS |
| 295 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: CNS-WHT-961SPP |
| 296 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: ALD-CHR-081 |
| 297 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: FUS-CHR-29083K |
| 298 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: FUS-CHR-29053 |
| 299 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: ALD-CHR-573 |
| 300 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: URS-WHT-13253N |
| 301 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: PRS-CHR-073 |
| 302 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: CNS-WHT-705 |
| 303 | Providing and fixing Sanitary Fixtures (Jaquar and equivalent) PRINCIPAL TOILET FRONT AND REAR - Model No: FUS-CHR-29037 |
| 304 | Point wiring for Light / Bell with2-1.5 sq.mm& earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erectedwith 6A Modular type switch / bell push & accessories and earth continuityof following type, erected on PVC / Metallic/Wooden box, single mounting base framecovered with textured/metallic/white front plate modules erected on /in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed inwall/ceiling complete. Cat-III |
| 305 | Point wiring for FAN with 2-1.5 sq.mm& earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV GradeFRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipeerectedwith 6A Modular type switch and hum free EMEstep type electronic fan regulatormounted andaccessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic/whitefront plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed inwall/ceiling complete. Cat-III |
| 306 | Point wiring for Individual Plug with& earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erectedcomplete with Modular type switch & 5 pin Plugerected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. (I) [I] For 6A Plug and 6 a switchwith 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board. (f) with medium class Rigid PVC pipe and accessories erected concealed inwall/ceiling complete. Cat-III |
| 307 | (II) [II] For 16A Plug and 16 amp switchwith 2-2.5 sq.mm Cu. Wire from mcb db board. (f) with medium class Rigid PVC pipe and accessories erected concealed inwall/ceiling complete. Cat-III |
| 308 | (III) [III] For 16A Plug and 16 amp switchwith 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board. (f) with medium class Rigid PVC pipe and accessories erected concealed inwall/ceiling complete. Cat-III |
| 309 | Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/whitefront plate modules erectedon/ in wall / ceiling with following type accessories. Cat-III |
| 310 | Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm& earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed inwall/ceiling complete. Cat-III |
| 311 | Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type ofpipe to be erectedcomplete with earth continuity and necessary connection with primary light with accessories erected onMetal /PVC / wooden box covered covered with appropriate front plate modules erected on / in wall / ceiling for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.as per pipe erected with following type of accessories. (f) with medium class Rigid PVC pipe and accessories erected concealed inwall/ceiling complete |
| 312 | Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat-III |
| 313 | Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. (4) TV Co-axial Socket outlet |
| 314 | Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. (8)ComputerRJ-45 socket. Cat-III |
| 315 | Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. (19) Modular Indicating Call Bell Cat-III |
| 316 | Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate , modules erectedwith necessary connections as per site situation directed by Engineer In charge. (24) Batten Holder/Angle Holder with modular frame withmetal ring. Cat-III |
| 317 | Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceilingerected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (a) 20 mm |
| 318 | Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceilingerected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (b) 25 mm |
| 319 | Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceilingerected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. (c) 32 mm |
| 320 | Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (a) 20 mm |
| 321 | Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts etc. complete of following sizes. (b) 25 mm |
| 322 | Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following sizes. (1) 75 mm x 50 mm trunking |
| 323 | Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material with ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat bends, coupler, tee etc..All necessary accessories and measuring of following sizes. (2) 100 mm x 50 mm trunking |
| 324 | Providing & Erecting eight module pop up floor box/flushed with table surface Conform to IEC 60670-1, IEC 60670-23 & IEC 60884-1 with required items as demanded by engineer in charge with complete finishing .cat-III |
| 325 | Supplyingunder floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Jointsas required and demanded by engineer-incharge andlaying/erectingas per OEM guidelines and as per instruction of engineer incharge having following size of dimensions and No of compartments (W x D x T) Cat-III [1] 50mm x 25mm x 1.6 mm with One Compartment |
| 326 | Supplyingunder floor pregalvanised corrosion proof rectangular sheet steel cable trunking of 1.6 mm thick having with stand point load up to 1.33 Ton & free from seepage of concrete of screed water with all accessories,Junction Box,Jointsas required and demanded by engineer-incharge andlaying/erectingas per OEM guidelines and as per instruction of engineer incharge having following size of dimensions and No of compartments (W x D x T) Cat-III [3] 100mm x 25mm x 1.6 mm with one compartment |
| 327 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipeto be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (A) With medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm |
| 328 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipeto be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (A) With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm |
| 329 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipeto be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (A) With medium class Rigid PVC pipe and accessories (g) 4 wire 4 sq. mm |
| 330 | Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipeto be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size. (A) With medium class Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm |
| 331 | Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. (e) 1.50 Sq.mm 3 core round PVC sheathed |
| 332 | Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. (h) 2.50 Sq.mm 3 core round PVC sheathed |
| 333 | Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [C] CAT - 6 |
| 334 | Providing& erecting Switchboard for Computer or electric apparatus consisting offollowing modular type accessories mounted withPVC/ Metallic concealed/open box with single mounting base frame covered with textured/metallic /white front plate,modules erected with necessary connections as directed 1 no. 6A/16A universal plug-switchcombined. 3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories Cat-III |
| 335 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of co-extruded polycarbonate channel with diffuser part in needed opal finishwith company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light with integral driver (i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to 2 feet Cat-III |
| 336 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of co-extruded polycarbonate channel with diffuser part in needed opal finishwith company mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Tube Light with integral driver (ii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet |
| 337 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (A) Square/ Circular shaped Surface/Recessed Mount Downlight with provision for spring loaded mounting clips complete.IP20 (i) 5-9 watts,Surge-2 KV Cat-III |
| 338 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20. (iii) 12-15 watts, 6" x 6", Surge-2 KV Cat-III |
| 339 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20. (iv) 18 to 20 watts, 8" x 8", Surge- 2 KV Cat-III |
| 340 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20. (v) 24 watts, 12" x 12" , Surge-2 KV Cat-III |
| 341 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) LED Panel Light with provision for Plane front frame with translucent cover fixed to housing complete.IP20. (vi)36 watts, 24" x 24", Surge- 2KV Cat-III |
| 342 | Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die castpowder coated and high U.V. & corrosion resistancewith diffuserhoused in aluminium casted body with company mark/name 160V to 270V,Power Factor more than 0.9, THD < 15 %, CCT3000 K to 6500K, Luminaire efficacy> 85 lumens/watt , LED driver efficiency > 85 % ( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (I) Adjustable spot light with COB led having aluminium reflector of following wattage (iv) 30 Watts Cat iii |
| 343 | Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) Flood Light (IP-65),Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (ii) above 48 to 60 Watts Cat-III |
| 344 | Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (B) Flood Light (IP-65),Surge protection -4KV integral and ,Light must have 440VAC line supply with over-voltage protection. (vii) above 200 to 250 watts Cat-III |
| 345 | Supplying and erecting LED street light / Flood light fittings with High power White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w and corrosion free High pressure die cast aluminum housing with smooth finish powder coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glasswith company mark/name engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %, CCT3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(fittings required LM-79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage capacity between the ranges shown.) (C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting driver and accessories wired upto terminal block.IP 65 (ii)32-40W Cat-III |
| 346 | Pproviding and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III |
| 347 | Providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 35 KA. at 415 V. having normal current rating125A. with Fixed thermal & magnetic release suitable to work on A.C.supply 50 c/s. with all internal connections, spreader tinned copper & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU onlyCat III |
| 348 | providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark Cat-III |
| 349 | Providing & erecting 240 V MCB double pole switch for motor & inductive load(C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having following capacity. (A) 6 to 32 Amp. |
| 350 | Providing & erecting 415 V MCB Four Polefor Motor & InductiveLoad (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (a) 6 to 32 Amp. Cat-III |
| 351 | Providing & erecting 415 V MCB Four Polefor Motor & InductiveLoad (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity. (c)63 Amp.Cat- III |
| 352 | Providing & erecting 415 V MCB three Polefor Motor & InductiveLoad (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity (a) 6 to 32 Amp.Cat-III |
| 353 | Providing & erecting 415 V MCB three Polefor Motor & InductiveLoad (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity(c) 63 Amp. |
| 354 | Supplying & erecting 20 Amp 10 KA‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection. [A] Metal Clad Socket with metal clad top Cat-III Note:- Enclosure Should be used of same company of MCB or MCB DP or RCCB For Item No 3-11-1 to 3-11-4. ADD 20% more for concealed errection of distribution board. 3-11- 5 to 3-11-8. |
| 355 | Plastic enclosure fitted with DIN rail suitable for incorporatingOne / Two nos. MCB |
| 356 | Plastic enclosure fitted with DIN rail suitable for incorporatingThree /Four nos. MCB |
| 357 | Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43) (iii)8 way |
| 358 | Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (A) single phase incoming and horizontal single phase outgoing (b) sheet steel double door (IP-43) (iv)12 way |
| 359 | Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoingPer phase isolation type (PPI) (b) sheet steel double door (ii)6 way |
| 360 | Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoingPer phase isolation type (PPI) (b) sheet steel double door (iii)8 way |
| 361 | Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for63/100 AMP TPN MCCB+ RCCB as incomer and three phaseoutgoing as per following .(The DBs should be used of same company of MCB to be used) (B)6 way outgoing |
| 362 | Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986,IP-54 suitable for63/100 AMP TPN MCCB+ RCCB as incomer and three phaseoutgoing as per following .(The DBs should be used of same company of MCB to be used)(C)8 wayoutgoing |
| 363 | Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. ratingerected as directed (i) 25 Amps.DPCat-III |
| 364 | Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. ratingerected as directed (ii) 40Amps. DP Cat-III |
| 365 | Providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component. for following Max. ratingerected as directed (iii) 63 Amps. DP Cat-III |
| 366 | Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for MEDIUM VOLTAGE installation to be erected as per IS-2551. |
| 367 | Providing and erecting metallic vitrified danger notice board as per language suggested by engineer incharge for HIGH VOLTAGE installation to be erected as per IS.-2551. |
| 368 | Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. using proper clamp. |
| 369 | Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ Transformer, LT panel board, Motors etc. using copper clamp. |
| 370 | Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire. |
| 371 | Supplying & erecting in earthpit of minimum bore dia. 225mm sizeapproved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipeshaving Outer pipedia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applicationswith chamber and heavy duty cover.(approvedmake OEM has to submit test certificate including value of earth resistane of installation. [B] For Electrical installation up to 11 KV located in other than normal soil i.e. Soft Rock, Marshy Soil etc. -Length of Pipe : 2 mtr -Back filling Compound :1 no. Bag of 25Kg. |
| 372 | Supplying & erecting in earthpit of minimum bore dia. 225mm sizeapproved make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipeshaving Outer pipedia of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applicationswith chamber and heavy duty cover.(approvedmake OEM has to submit test certificate including value of earth resistane of installation. [C] For Electrical Installation covering Transformer Neutrals, Lightningarrester Earthing, A.C.Plant & SensitiveComputer System(likeAutomation,SCADA)i.e. independent Earthinglocated in other than normal soil i.e.Soft Rock,Marshy Soil etc.. -Length of Pipe : 3 Mtrs. -Back filling Compound :2 nosBags of 25 Kg. |
| 373 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (B) 3 1/2core 35 Sq. mm ( 16 Sq. mm 1/2 core) |
| 374 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables(C) 3 1/2core 50 Sq. mm ( 25 Sq.1/2 mmcore) |
| 375 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables(E) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) |
| 376 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables(F) 3 1/2core 120 Sq. mm ( 70 Sq. mm 1/2 core) |
| 377 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables(H) 3 1/2core 185 Sq. mm ( 95 Sq. mm1/2 core) |
| 378 | Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (C) 4 core 10 Sq. mm |
| 379 | Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (A) 4 core 16 Sq. mm |
| 380 | Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (B) 4 core 25 Sq. mm |
| 381 | Making trench in soft soil of suitable width of 90 cm deep for laying cable or locating the faultall over the run and back filling the same and making the surface as normal ground. |
| 382 | Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original. (C) 300 mm dia |
| 383 | Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original. (E)150 mm dia |
| 384 | Providing & laying approved makeDouble walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connectingaccessories of same material at required depth in existing trenchfor laying ofcable. below ground/ road surface for enclosing cable (A)50 mm outer dia |
| 385 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (C) 2 to 4 core 10 Sq. mm |
| 386 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (D) 2 to 4 core 16 Sq. mm |
| 387 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 2 to 4 core 25 Sq. mm |
| 388 | Providing and, fixing heavy duty flange type brass double compression type cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (B) 3 & 1/2core 35/50 Sq. mm |
| 389 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (D) 3 & 1/2core 95 Sq. mm |
| 390 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (E) 3& 1/2 core 120 Sq. mm |
| 391 | Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. (G) 3 & 1/2core 185 Sq. mm |
| 392 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (B) 10 Sq.mm |
| 393 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25 Sq.mm. |
| 394 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (D) 35/50 Sq.mm. |
| 395 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (E) 70 Sq.mm. |
| 396 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (F) 95 Sq.mm. |
| 397 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (G) 120 Sq.mm. |
| 398 | Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. ( I ) 185 Sq.mm. |
| 399 | Solder less crimping type Copper lugs conforming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/2.5 to 6 Sq.mm |
| 400 | Providing and fixing approved make Perforated C type cable tray.Made fromsheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall becoated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforationwith coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included)as per Specification and as per instruction of engineer in charge (3) 150 X 50 X 1.6 mm Thick |
| 401 | Providing and fixing approved make Perforated C type cable tray.Made fromsheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall becoated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforationwith coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included)as per Specification and as per instruction of engineer in charge (5) 300 X 50 X 2.0 mm Thick |
| 402 | Providing and fixing approved make Perforated C type cable tray.Made fromsheet steel. The cable tray should be single or double bended as per required and as per IS 2062/1079 and shall becoated with hot dip galvanizing as per IS 2629/4759. with max 17.5% perforationwith coupler plate / Fish plate and GI hardware like nut - bolt and washers etc. erection with necessary support( included)as per Specification and as per instruction of engineer in charge (6) 450 X 50 X 2.0 mm Thick |
| 403 | Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having3blades with aluminium blades with , canopy & 30 cm. down rod erected with earthing.(Make shall be approved by Architect/Consultant) Make: Havells Stealth 120cms 3 Blade White Ceiling Fan or Equivalent |
| 404 | Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation without leakage and earthing. |
| 405 | Supplying & erectingfan hook box of10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. |
| 406 | Providing Fan clamp of 30 x 5 mm flat of required length & 10 mm M.S. Bolt & Nuts erected with necessary hook of 10 mm M.S. Round Bar. |
| 407 | Supplying & erecting approved make low noise decorative exhaust fan having square frame ABS body with inbuilt lowers & square frame. 250mm with 1350 RPM Cat.II |
| 408 | Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having following dia size and maximum speed in RPM. [E] 450 mm dia 1400 RPM Cat-II |
| 409 | Providingcement concrete.for foundation or for concrete filling in 1:2:4 ratio with 20 to 25 mm stone metal duly plastered with necessary curing for pole muffing or any other purpose. |
| 410 | Supplying & erectingapproved makeSMC press moulded composite FRP.loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob& hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box. (C)150mm x 125mm x 100mm [deep] |
| 411 | Supplying & erecting IP 55 grade following size section pillar fabricated from joint less M.S. Sheet with angle iron legs made from jointless M.S. Angle with cable clamps to be buried in ground to have appropriate erection to work uniform until erected with cement concrete foundation and 45 cm high bricks work finishing with plaster etc. hinged double door internally supported on both side, with internal and outside looking arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle of Two Nos. one is welded and other with nut and bolt for erecting Bakelite sheet. Painting the Section Pillarinside and out side with three tank powder coated paint.section pillar roof should be without joint with water leakage proof & tested as per IP 55 test & followed by IS 2147 of 1962 (A) 150 X 90 X 75 cm section pillar fabricated from 14 Gauge MS Sheet with angle iron legs 95 cm long made from 40 X 40 X 6 mm thick MS angle. |
| 412 | Supplyof approved make FRP Polehaving following specifications: FRP Light Pole made by CNC filament winding machine using thermoset resin polyester/epoxy resin system) having minimum 62% glass content. The pole should be in one piece and tapered round in shape, having smooth finish and should be totally free from corrosion as well as non conductive & shock proof Pole should be provided with FRP Anchor Base and it should be heavy duty, or MS Material duly painted with Epoxy paint. Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after applying suitable primer system that ensures proper adhesion of the paint. Minimum coating thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10% of the length of pole for the given load“ Pole should be generally made as per the dimensional data, performance criteria and some interchangeability features of poles as per standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination box with necessary accessories . The size of pole and type of installation with foundation as per manufacturer details and site requirement are as below . (1) Suitable for base plate mounting single arm Bracket. [E] Overall length of 4.5 Mtr. Average Thickness: 7.5mmTop/ Bottom OD Dia A/F 89/151mm ± 2mm approx. approx. Weight of Pole 21 kg approx. (Without Base) Anchor Base (Size 250X250 & 16mm th.) |
| 413 | Supplying, erecting, testing, commissioning approved make M.S. Polygonal High Mast Pole having following general Specification. (a) Polygonal Section fabricated from M.S. Plate confirms BSEN 10025 & Hot deep galvanized minimum 65/86 micron (as per IS 2629 /1985) Lantern carriage with ring and rubber lines for erection of luminaries of suitable site. (b) Maximum telescopic section not more than four (c) Double drum gear pipe motorized winch with 6mm dia S.S. Rod (For 16 mtr and above size) (d) Approved make L.E.D. aviation light = 1 No. Lightening arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured. (e) Bottom most section suitable for mounting reversible motor and switchgears having door not more than 1400mm x 300mm with waterproof gasket & hinges & locking arrangement. (f) Pole structure comprises suitable size of reversible motor, cable and necessary switchgears with control panel.(g) bottom section shall have suitable size of thickness supports ribs foundation bolts nuts etc. (h) Item not comprises the cost of lanterns. (i) Necessary Cement Concrete foundation as per IS including testing & commissioning of the entire structure for following size of High Mast poles [7] High Mast 20 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. - 2, Bottom Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate -dia.580 mm x 20 mm thick, Foundation Bolt Size M27 x 850mm, Qty - 10 Nos., Suitable for mounting Fitting of Light - 20 Nos. |
| 414 | Supplying, erecting, commissioning and testing analog EPABX CMOS microprocessor based system having common features With remote programming & remote dialing having following other common features. (Accord Matrix or equivalent approved make)- Auto Call Disconnector- (Incoming - Local- STD) with programmable timing- External Call forward with DOSA- Walk in Class of service & trunk reservation- Boss ring & call back on No Reply last callerrecall CLI- Hot Line with Delay & with No.- Unsupervised Conference- Serial DISA ( DISA with option to dial another No. if Extn. is No Reply)- Programming Flexibility of all features relatedto timer( 41 Timer)-10 Different group of out going call restriction like 95, 97, 98 etc.Having followingcapacity. (C) 4 incoming junction line & 12 extensions. |
| 415 | Providing & erecting Following capacity Amplifier WITH BUILT-IN DIGITAL PLAYER , MEDIUMWATTAGE PA MIXER AMPLIFIER, Built-in MP3 player with remote control for USB, SD/MMC card reader approx 2% THD ,Frequency Response :- 50-15,000Hz ±3dB Tone Controls -Bass:Treble ,Speaker Output :- 4?, 8?, 70V & 100V ,Digital Player MP3 Player with USB, SD and MMC Card Reader. (C) 500 Watts (max 750 W RMS output) |
| 416 | SITC of 200 WATTS 2 ZONE PA MIXER AMPLIFIER.6 Mic, 2 Aux Inputs and CD/Stereo input (L&R)Built-in MP3 player with remote control for USB, SD/MMC card reader.Mmedium sized installations, two separate groups of speakers are needed to be connected.User has a choice to connect both the zones . Power Output :- 130W + 130W Max., 100W + 100W RMS at 10% THD, 90W + 90W RMS at 5% THD, 80W + 80W RMS at 2% THD, Speaker Output :- 4?, 8?, 70V & 100V for each zone as directed by engineer in charge |
| 417 | Providing and erecting AUDIO MIXER Max. 16 Mic / 20 Line Inputs 4 GROUP Buses + 1 Stereo Bus 4 AUX (incl. FX),“D-PRE” mic preamps with an inverted Darlington circuit, 1-Knob compressors High-grade effects: SPX with 24 programs, 24-bit/192kHz 2in/2out USB Audio functions, Connection Kit / Lightning to USB Camera Adapter, Includes, Compactable with smartphone application, 48V phantom power, XLR balanced outputs Internal universal power supply for world-wide use Rack Mount Kit Included Metal chassis as directed by engineer incharge YAMAHA /SOUND CRAFT/ MACKIE/ BEHRIGERor Eq. |
| 418 | SITC of High fidelity 2-Way PA Wall Speaker.Easy power tap selection through a slotted rotary switch knob at the rear.‘U’ type bracket for convenient & firm mounting of the wall speaker with following power rating , IMPEDANCE/VOLTAGE :- 8? / 100V - FREQUENCY RESPONSE - 50-20,000Hz with following size of woofer & tweeter SPEAKER - (A) 30 watts with Woofer approx 100mm (4"), Tweeter 25mm (1") |
| 419 | SITC of Professional high quality PA Gooseneck Microphone are suitable for various PA applications such as on Lecterns and Podiums, Open Conferences etc. The sleek and slender design makes the microphones unobtrusive.Wide frequency response.Frequency Response :- 100-15,000Hz ,Impedance :- 1000? ,Sensitivity :- 7mV/Pa ,Power Source :- 1.5V-9V DC ,Overall Length :- 585mm (23”) erected as directed by engineer incharge |
| 420 | Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means ofextra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas charging and 15A plug top & Remote Control & MS Stand) with necessary core cutting. Note :- Premium category:O-General, Mitsubishi electric (2)For 4/5 Star Rating of current year (B) for 1.5ton capacity- Premium Cat. |
| 421 | Supplying & installing MS standard type stand mounting for outdoor unit of Split A.C. upto 4 TR capacity erected with necessary hardware materials as directed. |
| 422 | Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity 150 Ltr.per hour @ an ambient temp of 45° C. The outlet temp. of the water should drop by 15°C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. |
| 423 | Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with "O" ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed [B] 25 Ltr / Hr with 30 Ltr. Storage Tank |
| 424 | Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with "O" ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster pump |
| 425 | Supplyingand erecting approved make online Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC &inverter having output230V,50 Hz Acwith 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. (F) 20 KVA3 - phase with 1Hr Backup |
| 426 | Supplying and erecting Fully Automatic hydro pneumatic booster system with cast iron housing Enclosure class IP44 minimum , with built in PTO motor protection and stainless steel impeller pump, pump modelGRUNDFOS CMB 5-46 series or equivalent one pump working and one standby for support with following specifications: i) Power 2.25kw/3 HP,3 Phaseii) Flow rtate -12cm2 iii) working pressure -4.5 to 5 kgiv) GI inlet & outlet header size 40/80 mm , outlet50 mm with NRV,,Pressure switch ,pressure transmission, pressure gauge & other required accessories with necessary Plumbing work ofsuction and delivery pipe which includes all required size of pipes, Joints valves, Bypass valve, labor all accessories required for installation of pressure pump ( Foundation work and base stand cost included) along with Panel HMI PLC with VFD with necessary switchgears and cable. |
| 427 | Providing, erecting, testing & commissioning approved make oil immersed ONAN cooled, double wound, core type indoor / outdoor copper wound 11KV/ 433V step down transformer of following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil not exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C. complete with necessary radiator first filling of new transformer oil & standard fitting as below complying withIS 1180( Part 1 ):2014 standards with energy efficiency level 2. Off load tap changing range steps +2.5% to -5% on H.Vfor variation should be provided. The H.V. shall be connected Delta & Secondary with star connection. The transformer should have cable-end boxes on H.T. side suitable for up to 3 core 150 sq.mm. XLPE cable & on L.T. side suitable for bus duct or cables as per requirement complete with test certificates from manufacturers 1. Oil conservator with filling Hole &Cap -One No. 2. Thermometer pocket with 6" dial typethermometer switch alarm & trip contacts- Two nos. 3. Silica-gel breather with charge- OneNo. 4. Plain oil level gauge -One No. 5. Drain / Sampling / Filter valve- One No. 6. Top Filter Valve -One No. 7. Explosion vent with Diaphragm -One No. 8. Rating & Diagram plate - One No. 9. Additional neutral bushing for earthing - One No. 10. Bi directional Roller - Four Nos. 11. Earthing terminals - Two Nos. 12. Lifting lugs - Two Nos. 13. Air release plug. - One No. 14. Double float buchholz relay with Alarm and trip contacts. 15. Control cable as required from Transformer to VCB Panelis to be provided with necessary connection to VCB relays for protection. as per IS 1180 level-2 (b) 315 KVA Max. allowable loses at 50 % of rated load is 1.025 KW and at full load is 3.1 KW Ca-III |
| 428 | Providing, installing & commissioning & getting Plan Approval as well as NOC from Electrical Inspector for draw out type 11 KV indoor extensible type totally enclosed, single busher floor mounting metal clad 400A. vacuum tube circuit breaker confirming to IS: 2516 (Part- I &11, Sec.1) ‘for use on 11 KV, 3 phase, 50 c/s. unearthed A.C. supply system having breaking / rupturingcapacity of 350 MVA complete with springoperated mechanism, mechanically ON-OFFand spring mechanism charged, discharged indicators,ON-OFF mechanical push button, operation counters necessary auxiliary switches, closing shunt trip, air insulated busbar chamber having heat shrinkable PVC sleeves, mechanical interlocks safety shutters, isolating plugs and a VCB trolley with three vacuum interrupters with epoxy support insulators and self aligning finger type isolating contacts. The breaker shall be Manual cum motorised mechanism with following accessories. 1. 144 mm. square flush mounting type digital multifunctional meter with communication facility 2. Power Factor Meter One No 3. Double core current transformer cast resin type having ratio 200 to 50/1 core for metering & second core for protection having required class of accuracy. 4. Instantaneous under voltage relay - & Temperature rise Tripping Relay 5. Electrical closing coil & short trip coil operating on 110V.D.C.- 6. Auxiliary relay for anti pumping device 7. Three phase Three limb Drawout type feeder connected & output of 200 VA cast resin insulated potential transformer having ratio 12000V./110V. and 200 VA Burdon with 0.5 accuracy 8. Common Alarm bell operating on 110V A.C.- One No. 9.Digital KWH Meter - One No. 10. Cable boxes suitable up to11 KV 3core 150 sq.mm XLPE cable. 11. 230V. A.C. to 110V. D.C. power pack for closing & tripping circuitcommon.. (for each VCB) 12.Breaker ON-OFF, Auto trip and spring charged indicators 13.Phase indicating & panel illumination lamps with plug socket 14.Numerical Communicable type non directional O/C & E/F Relay with a setting of 5-250% both in O/C & E/F. Complete with necessary interconnection with air insulated high grade copper busbar {Breaker Testing scope include Closing Time, Opening Time, VCB Hi-Pot test at Site}{ Relay Testing Scope Include testing of all protection by three phase testing kit at site }(VCB Trolley is to be provided) |
| 429 | Providing and fixing printed instruction chart both in English and Gujarati and duly framed with front glasses, for treatment of person suffering from Electric shock with minimum 50" diagonally size. |
| 430 | Providing pair of rubber hand gloves suitable for working on 11 KV/22 KV supply. |
| 431 | Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (b)4mm |
| 432 | Supplying rubber matting of following thickness as per IS:15652/IEC 61111 (c)12mm |
| 433 | Supplying stand first AID box with antiseptic cream, medicine for use on wounds due burn, crepe bandage, gauge bandage, medicated ready to use bandage (Band-aid) adhesive tape for medicinal user, Scissors, anti-septic solution (Savlon or similar) etc. (All above contents shall be of standard makes) |
| 434 | Supplying FIREbucket round bottom of9 litres capacity made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside andRed out side with FIRE mark,filled with dry-sand and kept on existing stand provided or hung on wall hook. |
| 435 | Supplying and erecting floor mounting stand for keeping four nos. of FIRE buckets comprising 1500 mm in length, 900 mmheight frame made out of 30mm X30 mm X 4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of approved enamelled silver paint. |
| 436 | Wall hook 22 to 25 cms. projection for keeping fire buckets made out of 15 mm dia. M.S rod grouted in wall to a depth of minimum 15 cms. |
| 437 | Providing, and erecting 11 KV D.P.9 mtr. high Structure made of 6" x 3"‘I’-Section Girder, 4" x 2"channels, clamps, nuts, bolts etc.Suitable for erection of the followings duly connected with necessary ACSR conductors. as per drawing approved by the Engineer- in charge complete with following. Height as per IS 7 Mtr above ground ) (A) 11 KV 200 Amps Drop out fuses with S.R.B.P. tubes carries.-Three nos (B) 11 KV G.O.D. switch complete with insulators, operating handle with galvanisedpipe, Sq.bar etc. 400 Amp.-OneSet (C) 11 KV lightening arrestor with clamp-ThreeNos. (D) 11 KV shackle insulators- SixNos. (E) The above D.P. structure should be earthed with 25 mm.X 3 mm thick double copper earth strips run separately and connected with separate copper plate earth electrode. |
| 438 | Providing and erecting ISI Marked 3core 70 Sq.mm XLPEinsulated 11 KV armoured cable Aluminium conductor IS-7098 to be laid on wall with clamps or in provided cable trench / pipe approved manner as directed. |
| 439 | Providing and erecting cable end termination kit, heat shrinkable Push ontype Densons’/ ‘Raychem’/ Elastimold make suitable for 11 KV XLPE cable 3 core 50& 70 Sq.mm (A) Outdoor type |
| 440 | Providing and erecting cable end termination kit, heat shrinkable Push ontype Densons’/ ‘Raychem’/ Elastimold make suitable for 11 KV XLPE cable 3 core 50& 70 Sq.mm (B) Indoor type |
| 441 | Supplying & erecting D.C.P. type fire extinguisher for following capacity cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and brackets confirming to IS 2171 1985 and complete erected with necessary clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall complete. [B] For 10 KG Capacity |
| 442 | Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. [B] For 5.5 / 6.5 KG Capacity |
| 443 | Supplying and erecting, commissioning and testing of Diesel Generating setconfirming to IS: 4722:1968 & BS:5514having continuous rating, 3 phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed air/water cooled diesel engine with multi-cylinders developing suitable BHP not less than following capacityat 1500 RPM with 10% overload for one hour in 24 hours with standard accessories like fly wheel, lubricating oil cooler, "A" class governor, heavy duty fuel wheel and lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end exhaust manifold, standard set of tools with adjustable spanners, screw drivers, cylinder head to cover, joint cylinder head to exhaust, element lube oil filter, 12 / 24 volts electric starting equipment complete with standard heavy duty battery, dynamo, cut-outs, ammeter, necessary wiring, pressure gauge, starter etc and heavy duty Residential type exhaust silencer and vertical hot air duct both logged with asbestos rope, save oil trays, exhaust piping of required length, standard wall/floor mounted fuel with level indicator and piping anddrip proof alternator, self excited, self regulated, screen protected, with excitation system, capable of delivering the rated system output at 415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM, conforming to IS-4722- 1968 with voltage regulation+/- 5% of rated voltage from no load to full load. Both the engine and alternator fitted on a common fabricated steel base plate with antivibration mounting engineand alternator both connected to each other by flexible flange coupling and with floor/wall mounted control panel box comprisingof voltmeter ammeter, selector switches, ACB / MCCB / MCB of adequate capacity, indicator lamps duly wired with HRC fuses. The alternator & control panel shall be connected with provided suitable capacity armoured cable and complete with Acoustic enclosure (canopy) made out of 16 SWG CRCA Sheet, sound absorbing material Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU Foam of 40 Density - at least 40 mm. The resin bonded rockwool covered from inside the canopy by perforated sheet with 3/4 mm holes, sound level not more than 75 dB at a distance of 1 mtr, as per PVCT norms. Erection, commissioning and satisfactory testing as per requirement with first filling of fuel, oil, etc. with guarantee / Warrantee of complete system for Two years. & with obtaining all necessary certificate from Electrical Inspector. The Capacity and Ratings of DG sets are as below. (K) Continuous rating of 82.5 KVA ,BHP not less than 102 BHP |
| 444 | Providing & erecting approved make AMF control panel suitable for following size of3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of scope as detailed below: 1) Power module:A pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alarm Load on generator. 5) Indicators Load on mains Engine fails to start. Emergency stop battery charger. The AMF Panel of following capacity (B) AMF Control Panel for75 KVA/ 82.5 KVA 3 phase DG Set |
| 445 | Supply, Installation, Testing & Commissioning of following size of Grid Tied Solar Power Plant with Solar Panels (ALMM approved): Frame Material :Anodized Aluminum alloy Frame With Twin Wall Profile, Front Cover : High Transmission Low-Iron Tempered Glass (AR Coated), High efficency and positive power tolerance Pmax: 0/+5, Module Efficiency should be approx.18%-21%,Normal operating temperature 45"C, Junction Box with Waterproof IP67 & MC4 Compatible and Enclosed with Bypass diodes, 100% Electroluminescence test to ensure error free Modules, Thep. temp. co-efficient of the PV module shall equal or better than -0.45%/degree C. Solar PV modules of minimum fill factor 75% to be used. Unit Production:- 4 to 5 Unit /kw /day (Actual)(1Year Avg) With 10 year Product warranty and 25 year Linear Power Warranty., Solar Inverter: MPPT Range: 80-1000 V, Max efficiency: 97.5% - 98.9%, O/p Frequency: 50/60Hz, Operating Altitude (m) =4000, O/p Power Factor: ~1, O/P THDi: <3%, Operating Tempreture Range: -25~60°C, Anti-islanding Protection Integrated, Input Reverse Polarity Protection Integrated, Insulation Resistor Detection Integrated, Residual Current Monitoring Unit Integrated, Output Over Current Protection Integrated, Output Short Circuit Protection Integrated, Output Over Voltage Protection Integrated, Protection Degree: IP65, User Interface LCD & APP,Datalogger & Communication: GPRS / Wi-Fi, Module Mounting Structure: Seamless Box Pipe / "C" Channelof suitable size for rooftop solar installations with good stability agaist wind & weight load., Hot Dipped Galvanized steel coils. suitable arrangement for base plate for foundation , solar panel mounting, the structure should be suitable for carry the load of solar panel,wiring, sprinkler system etc. with necessary foundation work/wall mount, j bolt, anchor fastner etc. the nut bolt used for installtion of stucture should be (SS 304) quality. and Balane of System with necessary Swithgears (Suitabel size and protection of ACDB & DCDB), inter connecting wiring, earthing system, lightining arrester system, all liasoning work with various gov. dipartment like state nodal agency,DISCOM & CEIG is included in agency scope (Excluding GEDA Application fees, Solar connectivity Charges, Meter connectivity Charges, Meter testing Charges.) (F) Grid Tied Solar Power System: 101 - 250 kW (3 - phase) |
| 446 | Supply Installation Testing and Comissioning of Electrical Panel as per SLD as per drawing and design issued by Consultant. |
| 447 | Supply Installation Testing and Comissioning of Outdoor Type (IP67) 10 - 15 W LED Plants Up Lighter Comprising Aluminium Die Cast Body, Spike for Mounting with Necessary Accessories. The Rate Shall be including Necessary PCC Pedestal for Mounting the same. Note: The fixture to be approved by Architect/Consultant before ordering. |
| 448 | Supply Installation Testing and Comissioning of Outdoortype (IP68) 50-70W Liner Wall Washer with Aluminium Body & Wide Beam Angle (More than 70 Deg.). The fixture shall be 4 Feet Long. Note: The fixture to be approved by Architect/Consultant before ordering. |
| 449 | Supply, Installation, Testing And Commissioning of 55"HD Monitor for viewing the cameras |
| 450 | Supply, Installation, Testing and Commissioning of 1080P IP Network IR Dome Camera, 1/2.8" 2 MP @ 25fps progressive scan CMOS, triple stream, H.265 and H.264, 2.8 mm lens, F2.0, TDN, 120dB True WDR, Min Illumination 0.001Lux @f/2.0, B/W :0Lux @f/2.0(IR on), Audio Mic In, PoE, 24VAC/12VDC, 15m IR distance, Inbuilt SD Card support upto 128 GB IP67, IK10 vandal proof, Having Operating temp range : –20°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CE, FCC and & RoHS compliant and Cyber Security Compliant PSS-DCI and UL-CAP. |
| 451 | Supply, Installation, Testing & Commissioning ofIP Network TDN Low-Light IR Bullet Camera, 1/2.7" CMOS, 2 MP @ 25fps, triple stream, Min. Illumination required 0.01 lux @ F1.4 (color), 120dB True WDR, Min. Pixels 1920 × 1080, triple stream,2.7–13.5 mm motorized focus & zoom lens, BLC, HLC, 3DNR, Privacy Mask, 4 IR LEDs Smart IR with upto 50m IR distance, Dual channel Audio G.711a/G.711u/AAC, 128GB SD card support, Alarm: 2 In/ 1out,PoE, H.265 and H.264 High Profile and MJPEG, Inbuilt analytics Trigger line/Intrusion/Loitering, PoE Class 3 and 12V DC, IP 67, IK 10 vandal proof, Having Operating temp range : –20°C to 60° C. Certifications: ONVIF Profile S & Profile G compliant, UL, CE, FCC & RoHS compliantand Cyber Security Compliant PSS-DCI and UL-CAP. |
| 452 | Supply Installation Testing & Commissioning ofNetwork Storage Manager(NSM) supporting ONVIF Profile S & G, PSIA, real time streaming protocol (RTSP)standards, emerging technologies in the industry, like 4K resolution, H.265 video compression codec. System proposed shall have scalability of 4 to 120 cameras per NSM with sufficient licenses to record all the cameras in this requirement. NSM shall support simultaneous recording, live monitoring, playback/search of recorded video for up to 4K resolution on all cameras, taking snapshots and viewing presets for PTZ cameras and system management. NSM shall have integrated Dashboard to easily monitor the health and recording status, Flexible retention time / archive time for cameras, Smart Motion detection, Role-based operator privileges supporting Windows and local users, Video Archiving, Multi-stream support, Advanced security features with encryption support for communication between desktop client to NSM and secure https login for Web Client and Mobile apps, Event history and operator log reporting with export to PDF, Crystal Reports, MS Excel/MS Word. NSM Shall support scheduled backfilling of the recordings from the edge storage/SD card of cameras to the NSM using ONVIF Profile G for robust recording against temporary network failure, N+1/N+M recorder failover and failback automatically or manually to have maximum system uptime and recording continuity. |
| 453 | NSM shall have Intel® Core™ i7-4790, 3.6 GHz or better, Mnimum 8GB RAM, DVD-R/W, 6 GB/s SAS/SATA RAID Card, 2 NIC cards supporting network throughput of 256 Mbps/425 Mbps for Incoming/outgoing, Graphics Adapter - Intel® HD Graphics 530, 4600, or equivalent for local client GPU rendering support, Windows Server 2012 R2 (64-bit OS versions recommended)/Windows 10/Windows 2008 Server R2 SP1 Operating System, Microsoft SQL Express 2012. The NSM shall be complete system for satisfactory surveillance operations with all necessary softwares, licenses, required PC Hardware, Storage, accessories etc., civil, electrical works & peripheral items, as required as per specification at site of work inline with the Engineer in Charge instructions. The System proposed should have 66TB Storage expandable upto 300TB. Storage must to calculated for 30 days of recording 720p, 25fps on higher native resolution. |
| 454 | Supply, Installation & Commissioning of NVMS workstation/PC with minimum Intel Core i7-6700, 3.4GHz, 8GB RAM, Windows 10 (64 Bit) OS, DVD R/W, Integrated Intel HD graphics 530 and NVIDIA Quadro NVS 315 1 GB PCIE x 16 LP supporting 4 Monitors. The NVMMS shall be complete system for satisfactory surveillance operations with all necessary softwares, licenses, required PC Hardware, Storage, accessories etc., civil, electrical works & peripheral items, as required as per specification in Annexure A at site of work inline with the Engineer in Charge instructions.. |
| 455 | Supply, Installation, Testing and Commissioning of Client Workstation with Client Software as techical requirement and specification |
| 456 | Supply, Installation, Testing and Commissioning of Equipment rack / Console as per requirement |
| 457 | Supply & laying of 2 Core X 1.5 sq.mm. FRLS Armoured PVC Insulated copper cable |
| 458 | Supply, Installation, Testing and Commissioning of Aluminum Curved/Linear Profile Light with 20W / Meter with Acrylic Diffuser. |
| 459 | providing and fixing cupboard fixed on the wall of depth 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of green lam or similar make or as described in drawings with desired fixing material like nailing and fevicol. fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Size:1800X450X2400 |
| 460 | providing and fixing cupboard fixed on the wall of depth 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol.fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 2 white board of 1200mm x 1200mm each over 18mm AA caliberated ply on each side as described in drawing with necessary fixing accessories. Fixing sliding white board of size 1800 x 1200 fixed over 18mm AA caliberated ply with aluminum sliding channel and necessary fixing accessories along with lock over 150mm deep 18 mmAA ply box for screen as mentioned in drawings.Size=4300X450X2400 |
| 461 | providing and fixing cupboard fixed on the wall of 7500 x 750 x 600mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol.fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. providing and fixing cupboard fixed on the wall of 7500 x 900 x 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate or as described in drawings with desired fixing material like nailing and fevicol. fixing clear 8mm tempered glass shutters with necessary ply framewith ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 7500 x 750 mm softboard over 18mm ply with necessary fixing material. Size=7500X600X2400 |
| 462 | providing and fixing cupboard fixed on the wall of depth 600 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate or as described in drawings with desired fixing material like nailing and fevicol. fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles. Size=7500X600X2400 |
| 463 | providing and fixing curved cupboard fixed on the wall of depth 600 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol. fixing FLEXI ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles.Size=2150X600X2400 |
| 464 | providing and fixing cupboard fixed on the wall of depth 600 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate or as described in drawings with desired fixing material like nailing and fevicol. fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles.Size=4800X600X2400 |
| 465 | providing and fixing cupboard fixed on the wall of depth 600 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate or as described in drawings with desired fixing material like nailing and fevicol. fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles.Size=7000X600X2400 |
| 466 | providing and fixing curved cupboard fixed on the wall of depth 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol. fixing FLEXI ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles.Size=3000X600X2400 |
| 467 | providing and fixing cupboard fixed on the wall of depth 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol.fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 2 white board of 1200mm x 1200mm each over 18mm AA caliberated ply on each side as described in drawing with necessary fixing accessories. Fixing sliding white board of size 1800 x 1200 fixed over 18mm AA caliberated ply with aluminum sliding channel and necessary fixing accessories along with lock over 150mm deep 18 mmAA ply box for screen as mentioned in drawings Size=6900X450X2400 |
| 468 | providing and fixing cupboard fixed on the wall of depth 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of green lam or similar make or as described in drawings with desired fixing material like nailing and fevicol. fixing 18mm AA ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc Size=3500X450X2400 |
| 469 | providing and fixing curved cupboard fixed on the wall of depth 600 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol. fixing FLEXI ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles. Size=3500X600X2400 |
| 470 | providing and fixing curved cupboard fixed on the wall of depth 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol. fixing FLEXI ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles.Size=2800X450X2400 |
| 471 | providing and fixing curved cupboard fixed on the wall of depth 450 mm of base of 18 mm AA type caliberated plyfixed with ss nails/screw and fevicol or similar binding material with vertical supports horizontal partitions as provided in architectural drawings finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make or as described in drawings with desired fixing material like nailing and fevicol. fixing FLEXI ply shutters with ss hinges finished with 0.8 mm inside laminate and 1mm outside laminate of greenlam or similar make as per client/architect"s selection with necessary minimum 200mm handles , 30mm lock, 200mm table chain, necessary magnets, stoppers, selfbat etc. Fixing 150mm drawers with necessary 18" drawer channels and finished with 0.8mm inside laminate and 1mm outside laminate of greenlam or similar make as per selection along with necessary fixing accessories such as nails, screws and handles.Size=97.47X600X2400 |
| 472 | INR Zero Only |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
