Andaman Public Works Dept-APWD has published Tender For Making Arrangement In Connection With Parliamentary Election-2024 At Jnrm, Port Blair. Sub Work - Barricading Of The Counting Hall, Strong Room For Parliamentary Election - 2024 At Jnrm, Port Blair. Submission Date for this Tender is 22-03-2024. Barricades Tenders in port Blair Andaman And Nicobar Islands. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. [(Excluding Steel Primer) (Labour Rate Only)] |
2 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
3 | Providing and fixing bolts including nuts and washers complete. |
4 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.)trussesetc.,includingcutting,hoisting,fixingin position and applying a priming coat of approved steel primer, including welding andbolted withspecial shaped washers etc. complete. (Materials to be taken Back by the contractor by dismantling/removing the same after the function). |
5 | Electric resistance or induction butt welded tubes. (Materials to be taken Back by the contractor by dismantling/removing the same after the Election). |
6 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Materials to be taken Back by the contractor by dismantling/removing the same after the function). |
7 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. |
8 | Using M.S. angels 40x40x6 mm for diagonal braces |
9 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead : |
10 | Of area 3 sq. metres and below |
11 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. |
12 | Providing and fixing welded steel wire fabric of thickness 2.5 mm of required width having rectangular mesh painted with two or more coats of steel primer. |
13 | Providing and fixing plywood IS: 303 of different size and different thickness whever required screening all complete. (Material to be taken back by the contractor by dismantling the same). |
14 | 12 mm thick plywood IS: 303 |
15 | 06 mm thick plywood IS: 303 |
16 | Applying priming coats with primer of approved brand and manufacture, having tow VOC (Volatile Organic Compound) content. |
17 | With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 60 grams/ litre |
18 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
19 | One or more coats on old work |
20 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead : |
21 | Thickness above 10 mm up to 25 mm |
22 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead : |
23 | Of sectional area 40 square centimetres and above |
24 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : |
25 | Superior hardwood Cat-II (A) |
26 | Renewing glass panes, with wooden fillets wherever necessary: |
27 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) |
28 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for walling / paneling backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimumcompressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class Acategory with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately) |
29 | 12 mm thick |
30 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
31 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture |
32 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge. |
33 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required said and colour complete to give and even said. |
34 | Old work (one or more coats) |
35 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
36 | Old work (Two or more coat applied @ 1.67 Itil 10 sqm) on existing cement paint surface |
37 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work |
38 | 20 mm nominal dia Pipes |
39 | Providing and fixing white vitreous china pedestal type water closet(European type) with seat and lid, 10 litre low level white vitreouschina flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standardmake and mosquito proof coupling of approved municipal designcomplete, including painting of fittings and brackets, cutting andmaking good the walls and floors wherever required : |
40 | W.C. pan with ISI marked white solid plastic seat and lid |
41 | Providing and fixing white vitreous china flat back or wall corner typelipped front urinal basin of 430x260x350 mm or 340x410x265 mmsizes respectively. |
42 | Providing and fixing PTMT angle stop cock 15 mm nominal bore, weighing not less than 85 gms |
43 | Providing and fixing P.V.C. low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete. |
44 | 10 litre capacity - White |
45 | Providing and fixing PTMT bib cock of approved quality and colour. |
46 | 15mm nominal bore, 86 mm long, weighing not less than 88 gms |
47 | Providing and fixing C.P. two way bib cock of approved quality as direction of Engineer - in - charge. |
48 | 15 mm nominal bore |
49 | Providing and fixing Hand Shower 105mm dia round shape Singleflow with air effect (ABS Body CP) with rubit cleaning system (HSH-1717 Jaquar or equivalent) |
50 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
51 | 150x10 mm |
52 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
53 | 125 mm |
54 | Providing and fixing acrylic sign board of defrent sizes with all fitings . |
55 | 400 mm x 200 mm |
56 | 600 mm x 500 mm |
57 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of: |
58 | Asbestos Cement sheet |
59 | Providing wood work wrought framed and fixedin position in roof trusses, purlins, rafter, ties etc. complete with : |
60 | Superior Hard Wood Cat - II (A) |
61 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail