Haryana Urban Development Authority-HUDA has published Tender For Construction Of Community Centre In Sector-32 U/E Karnal. `Constn. Of Building, Parking, Electrical Works, Fire Fighting, Fire Alarm, Plumbing Work, Cctv Connectivity, Horticulture Works Complete In All Respect`. (Including 3 Year Maintenance . Submission Date for this Tender is 04-04-2024. Building Work Tenders in karnal Haryana. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Providing and fixing of façade at all heights with extruded hollow Clay/ Terracotta ventilated rain screen tiles of height 250/ 300/ 400mm and length of 595 mm of approved texture, design and pattern having Flexural Strength/ Modulus of Rupture of ? 14 N/m² and maximum water absorption of 10% tested as per ISO 10545-4:2004(E) and ISO 10545-3:1995 respectively in true level fixed to a supporting aluminium framework(Alloy 6063 T5/T6) consisting of vertical `T` (for intermediates)/ `L`(for ends/ termination)/ Tubular sections (at corners)of size 80x60x2mm/ 40x60x2mm/ 40x40x2mm respectively, spaced at maximum spacing of 600mm c/c matching to the tile vertical grid, and horizontal aluminium `C`-clamps of size 56x25x2mm thickness of length 150mm at junction of tiles and of length 75mm at wall ends/ corners fixed on top of the vertical sections at spacing of 250/ 300/ 400mm c/c matching to the tile horizontal grid with two numbers of self-drilling / self-tapping SS screws of size 5.5x25mm with EPDM washers. The vertical T/ L/ Tubular` sections shall be fixed to the wall using HDG (hot-dip-galvanized) steel L-brackets (galvanizing thickness of minimum 80 microns)of size 110x80x6 mm at intermediate vertical aluminium profiles and of size 220x110x12mm at outer corners and stainless steel grade 304, M10 full threaded anchor fasteners with nylon sleeve 100mm long (for brick work) and M8 expansion anchor fasteners 75mm long for concrete surface, spacing of brackets to be based on a structural/ static calculation. The brackets shall be of length 175mm at junction of two vertical aluminium profiles and of length 100mm at intermediate points of vertical profiles and shall be fixed to the vertical aluminium T/ L/ Tubular profiles using two numbers self-drilling/ self- tapping SS screws of size 5.5x25mm with EPDM washers. EPDM gaskets to be fixed in between the brackets and vertical profiles. The tiles shall be mounted on the „C? clamps such that the tiles are supported at top and bottom at both ends. The tiles shall be additionally secured to the horizontal „C? clamps using special SS clips of required size which shall be inserted and pressed into position on the „C? clamps holding the tiles and the cut-tiles shall be glued at points to the horizontal „C? clamps by using MS Polymer sealant adhesive. The vertical joint open groove between two adjacent tiles shall be 5mm. The tiles and system shall be designed to resist wind load as per IS 875 (Part 3) according to different zones. The tiles shall be installed using the ventilated rain screen principle with provision for natural ventilation of the space between the façade tiles and the structural wall. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge with 16mm thickness ( plus /- 10%) terracotta tiles of grey colour. |
| 2 | Providing and filling AAC blocks including proper watering and compaction in sunken areas all complete as per drawings and as directed by the Engineer-in-Charge. |
| 3 | Providing and fixing GI Plain 75mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick Powder Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier splices maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out of SS steel sheet. The edge profile G.I. shall be matching with the panel. |
| 4 | ENGINEERED WOODEN FLOORING: Panel 1820 x 145 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1 plank out of 6 m2 per pack 1,583 m2 Kg per pack 11,99 kg Top layer PEFC controlled sources EN 13489 ± 3 mm Core board PEFC controlled sources Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic Multifit Domestic use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial On request `Wood for Life` Edge ProtectplusProvides a warranty on build-up of residue dirt along the edges due to maintenance over the years 10 years `Wood for Life` Surface and Edge Protectplus(lacquered products only) Provides a warranty on pollution of surface structure and a warranty on build-up residue dirt along the edges due to maintenance over the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers UV cured Lacquer Anti-scratch top coat 5 - 7 layers Natural variance Due to nature, visual surface can deviate from samples Surface treatments cf catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489 Lipping - difference in height (mm) = 0,20 difference in width (mm) = 0,20 cupping lengthwise % = 0,1 cupping in width % = 0,2 Dimensional stability ISO 24339 Cupping short side max % = 0,30 Changes 30 - 85 % RH Cupping short side min % = - 0,20 Open joints short side (mm) = 0,20 Open joints long side (mm) = 0,30 Under floor heating Suitable of special installation instructions. |
| 5 | Supply, Installation, Testing and Commissioning of Double Glazed Unit Glass (6mmplus 16 mm air gapplus6mm) DGU with 6mm Silicone bite and Aluminium Mill Finish spacer having a maximum U value of 1.283 W/m2K and minimum VLT of 32.5% (Saint Gobain SKN 754 II or equivalent) complete in all respect as per the direction of engineer in charge. |
| 6 | Finishing walls with granite atelio exterior paint of required shade: Natural granite-based finish. Modified pure acrylic emulsion based, reinforced by Granite aggregate. Formulated to withstand humidity, rain and hot climate. It contains silicone additive for breathability and water resistance. It contains anti-fungal and antibacterial additives. |
| 7 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron `Y` shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 8 | Providing and fixing 18mm thick Granite stone in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete. |
| 9 | ALUMINIUM SKIRTING: Supply of 100 mm `DMC` Aluminium (Grade 6063) Skirting with 15 micron anodising in Natural Finish. Thickness 1.30 to 1.50 mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket. |
| 10 | Supply of surface mounted 4 feet extruded aluminum LED batten with power consumption not more than 20W having lumen efficacy of not less than 100 lumens/W. |
| 11 | Supply of surface mounted 2 feet extruded aluminum LED batten with power consumption not more than 10W having lumen efficacy of not less than 100 lumens/W. |
| 12 | Supply Installation, Testing and Commissioning of Handicap Toilet special fixtures to the complete satisfaction of the engineer in charge- Grab Bar vertical swing white. |
| 13 | Supply Installation, Testing and Commissioning of Handicap Toilet special fixtures to the complete satisfaction of the engineer in charge- Grab Bar Left/ Right 90 angle, White. |
| 14 | Supply Installation, Testing and Commissioning of Handicap Toilet special fixtures to the complete satisfaction of the engineer in charge- Grab Bar 842mm long white |
| 15 | Pump for feeding Domestic/ Flushing water to entire Project. Variable Speed-Location - Near underground domestic water tank with Providing and fixing electronic type level indicator for water tank mounted in panel with level display, alarm when water level is low or high, full range from one level to four level display and manual reset for alarm etc. with electrical wiring conduit supports from wall and ceiling probes and all other accessories complete as required. |
| 16 | SITC of 36W 4X1 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination. CRCA powder coated white after phosphochromate treatment and High transmittance polystyrene opal diffuser. High efficiency long life LED package in integral module with system lumenefficacy of )100 lm/W and viewing angle of 120° to ensure better uniformity. Powered by built-in Isolated, SELV Output electronic LED driver (SMPS based constant current supply) with Output Short-circuit protection, Surge protection and other reliability test. CRI )80, Colour temperature 4000K, THD (10% and PF )0.95, IP20, IK03. Lumen output of 3600 lumens. Life class of 50,000 hrs @ L70, Operating Temperature:-10 TOplus 45 DEG.C: Input Supply Voltage Range:140-270 V, Frequency :50-60 HZ: Internal Surge Protection:3 KV: Protection : Reverse Polarity, Open and Short Circuit. DRIVER SAFETY REQUIREMENT STANDARDS: IS 15885-2-13, TEST REPORT TO BE SUBMITTED: PHOTO BIOLOGICAL SAFETY NORMS: IS 16108, TEST CERTIFICATE TO BE SUBMITTED: CERTIFICATION: LM 79 FOR LUMINAIRE LM 80FOR LED SOURCE. L = 1195 mm, B = 295 mm, H = 65 mm |
| 17 | Supply of 36 W (4 ft) Made up of scratch resistant unbreakable polycarbonate in grey finish. PG11 cable gland is used for maintaining ingress protection LED: High efficiency long life LED package in integral module with lumen efficacy of )100 lm/W and viewing angle of 120° to ensure better uniformity. Cover and Reflector: High quality polycarbonate diffuser in opal finish, with power coated CRCA sheet acts as reflector and control gear trey. Electronic Control Gear: Powered by an integral low THD electronic driver (SMPS based constant current supply) with Output Short-circuit / Open Circuit protection, Surge Voltage protection. it can be Surface and suspended through 2 nos. SS clamps and screws provided with fixture. System lumen 3600lm, CCT 5700, CRI)80, THD(10%, PF).95, IP65, IK08.Life class of 50,000 hrs @ L70, Operating Temperature:-10 TOplus 45 DEG.C: Input Supply Voltage Range: 140-270 V, Frequency: 50-60 HZ: DRIVER SAFETY REQUIREMENT STANDARDS: IS 15885-2-13, DRIVER PERFORMANCE REQUIREMENTS: IS 16104, PHOTO BIOLOGICAL SAFETY NORMS: IS 16108,CERTIFICATION: LM 79 FOR LUMINAIRE LM 80 FOR LED SOURCE. |
| 18 | Supply of 100w Sauces Genx2 LED High-bay with Epoxy powder coated pressure die-cast aluminium housing in grey finish with elegantly designed heat sink for efficient thermal management, sturdiness and excellent corrosion. SS Hardware, silicon gasket and cable gland is used for cable entry for maintaining ingress protection. High efficiency long life LEDs with lumen efficacy of )175 lm/W with view angle 120º to ensure better uniformity of light distribution (and viewing angle of 120° to ensure better uniformity. System Luem O/P of 15000, High quality Polycarbonate cover with integrated lens with optional narrow and wide beam angles for uniform distribution Built-in potted, IP67, electronic LED driver with APFC (SMPS based constant current supply), lower THD, Open Circuit protection, Over Voltage protection, Surge Voltage protection, 440V protection and other safety test as per IS 15885 Part-2/Sec 13 and CISPR 15. |
| 19 | Supply of LED recessed mounted Glow downlight with LED Light Emitting Diode for system power 15W, the luminous flux of 1200 lm, CRI) 80, 230V constant current driver, the colour temperature of 4000K neutral white, direct light emission, ABS housing with ceiling trim, PC Opal diffuser, passive cooling, electronic control gear, Protection class II, IP 20, Ø = 165mm, HT = 36 mm |
| 20 | Supply, Installation, Testing and Commissioning of Wall Fan of 400mm dia complete in all respects. |
| 21 | Supply of 4 C x 25 sq mm of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS: 7098 part-1 / IS: 1554 part-1 respectively and ISI marked. |
| 22 | Supply of 3.5 C x 50 sq mm of PVC sheathed PVC/XLPE insulated Aluminum conductor armored cable of 1.1 KV grade conforming to IS: 7098 part-1 / IS: 1554 part-1 respectively and ISI marked. |
| 23 | Supply of 3.5 C x 120 sq mm of PVC sheathed PVC/XLPE insulated Aluminum conductor armored cable of 1.1 KV grade conforming to IS: 7098 part-1 / IS: 1554 part-1 respectively and ISI marked. |
| 24 | Supply of 3.5 C x 240 sq mm of PVC sheathed PVC/XLPE insulated Aluminum conductor armoured cable of 1.1 KV grade conforming to IS: 7098 part-1 / IS: 1554 part-1 respectively and ISI marked. |
| 25 | Supply of 3.5 C x 300 sq mm of PVC sheathed PVC/XLPE insulated Aluminum conductor armored cable of 1.1 KV grade conforming to IS: 7098 part-1/ IS: 1554 part-1 respectively and ISI marked. |
| 26 | Supply of new generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening separate driver compartment with IP66 protection and impact resistance of IK07, High efficiency long life LED module with SMD LED package mounted on MCPCB. Lumen efficacy of LED )140 lm/W, Average life L70B50: 50000 hours, Tempered protective toughened glass, thermal shock and impact resistant fixed to the housing with SS screws. Asymmetrical batwing light distribution. Powered by built-in potted LED driver (SMPS based constant current supply) with lower THD, Output Open / Short Circuit protection, Phase to Phase protection Over Voltage protection, Surge Voltage protection upto 10kV and other safety test as per IS 15885 Part-2/ Sec 13, PF)0.95, THD(10%, Having system lumen of 8600 lumen |
| 27 | Supply, erection and commissioning of 2-pole structure for terminating 11 KV O.H. supply from supply company as per specifications and drawing. |
| 28 | Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of cubicle type 11 kV metering panel fabricated out of 14 SWG CRCA sheet steel, free standing floor readable dust and vermin proof with arrangement for sealing the covers and doors, reinforcement of suitable size angle iron, channels, T sections of flats wherever necessary. Cable gland plate shall be provided on bottom of metering panel. Panel shall be treated with all anti-corrosion process prior to powder coating. |
| 29 | Supply, laying and Testing of following 11 KV (UE) grade multi-core Aluminium conductor XLPE insulated cable, insulation screening with extruded semi conducting compound in combination with copper tape armoured cores laid up, inner sheath of PVC tape, galvanised steel flat strip armoured and overall PVC sheathed cable conforming to IS: 7098 (Part - II) and complete with all latest amendments etc. complete as required. Laying in ground including excavation, sand cushioning, brick protective covering and refilling the trench etc as required all inclusive. |
| 30 | Supplying rubber hand gloves suitable for 11/6.6 KV operation with ISI mark |
| 31 | Supply and installation of Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2 mm (Class A) |
| 32 | Supply and installation of Insulating Elastomer mats conforming to IS 15652:2006 of thickness 2.5 mm (Class B) |
| 33 | Supply and installation of shock treatment chart framed in good quality glass in English/ Hindi/ Local Language) |
| 34 | Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides and with description in single red colour on front side as required |
| 35 | Providing and fixing MV danger notice plate of 250mm x 200mm made of mild steel, at least 2 mm thick, and vitreous enamelled white on both sides and with description in single red colour on front side as required |
| 36 | Supply, Installation, Testing and Commissioning of High Voltage Switchgear suitable for indoor installation 11 KV 3 phase 50 Hz AC Supply, 350 MVA breaking capacity, metal clad, draw out type, vacuum circuit breaker, motor charged, equipped with short circuit, over current, earth fault protection, master relay and auxiliary relay for transformer protection, PT, CT Operated Ammeter, Voltmeter indicating lamp etc as per IS: 13118 amended up to date. |
| 37 | SITC of 82.5 KVA of D.G. Set, 3PH, 50Hz, Prime rating, CPCB-II compliant, standard DG set with standard AMF panel complete with Silencer, standard controller with Auto start/stop System, Exhaust Bellows, Battery with Leads, Sub-base Fuel Tank and First fill of Lube oil and Coolant complete with engine, alternator, base frame, radiator/heat exchanger, fuel tank, control panel, fuel piping foundation, all electrical interconnection, loop earthing, silencer pipe/ exhaust chimney as per latest CPCB norms, standard accessories and acoustic enclosure complete in all respect as per the directions of engineer in charge |
| 38 | Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dust and vermin proof, outdoor type, double door, with canopy, TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and including supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to earth, powder coated painting and marking as specified. Switch boards complete as per schematic diagram: |
| 39 | Supplying, installation, testing and commissioning of cubical type outdoor panel with canopy suitable outdoor use for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates I/C cleaning and finishing complete with 7 tank process for powder coating in approved shade, bus bar supports, with short circuit withstand capacity of 25 MVA for 1 Sec., bottom base channel of MS section not less than 100mm x 50mm x 5mm thick, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of Al. bus bars and control wiring with 2.5 sq mm PVC insulated copper conductor S/C cable alleys, cable gland plates in two half, including providing switchgears: |
| 40 | Supply, Installation, Testing and Commissioning of Machine Room Less 10 passenger (680 kg) lift having contract speed of 1 MPS servicing different floors in the existing lift shaft as per the detailed specifications enclosed as under 1. Travel 10 meters (approx). 2. Stop and opening = 2 3. Controller: AC variable voltage and and variable frequency 4. Automatic rescue device complete with dry maintenance free batteries as required. 5. Operation: microprocessor based single automatic push button/ without attendant. 6. Power – 415 v, 3 phase, 50 hz, 4 wire system. 7. Type of doors A – Car: power operated, centre opening horizontal sliding stainless steel scratch proof (moon rock finish) B – Landing Doors: MS doors finished with spray painting of approved shade. • A hand rail not less than 600mm long at 900mm above floor level to be fixed adjacent to the control panel on the lift car. • Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stop at a floor served by the elevator. • Comprehensive maintenance of lift which include routine, preventive and break down maintenance for period of three year including repair/ replaced items after completion of one year guarantee period. |
| 41 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :- 100 mm dia |
| 42 | Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :- 150 mm dia |
| 43 | Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required: (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (b) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-`F` insulation, conforming to IS- 325. (c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads: 2280 lpm at 56 m Head |
| 44 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/ gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :-100 mm dia |
| 45 | Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required:-100 mm dia |
| 46 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange:- 150mm |
| 47 | Providing and fixing flow switch in following sizes M.S. pipe including connection etc as required:- 150mm dia |
| 48 | Providing and fixing signages printed on photo luminescent U1000 aluminium sheet of 1.0 mm ( plus-10%) containing lumigen II as base chemical, covered under UV stabilized coating and of appropriate size (Glolite or equivalent make) including fixing on wall, door, ceiling etc. with proper clamps, hangers, cleats anchor fasteners etc. complete in all respects as directed by Engineer-in-charge. |
| 49 | Supplying, installation, testing and commissioning of micro processor based intelligent addressable main fire alarm panel, central processing unit with the following loop modules and capable of supporting not less than 240 devices (including detectors) and minimum 120 detectors per loop and loop length up to 2 km, network communication card, minimum 320 character graphics/ LCD display with touch screen or other keypad and minimum 4000 events history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel shall have facility to connect printer to printout log and facility to have seamless integration with analog/digital voice evacuation system (which is part of the schedule of work under SH: PA System) and shall be complete with all accessories. The panel shall be compatible for IBMS system with open protocol BAC net/ Modbus over IP complete as per specifications.- Ten Loop Panel. |
| 50 | Supplying, installation, testing and commissioning of intelligent analog addressable photo-thermal detector complete with mounting base complete as required |
| 51 | Supplying, installation, testing and commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required |
| 52 | Supplying, installation, testing and commissioning of intelligent addressable thermal detector with rate of rise cum fixed temperature thermistor complete with base as required. |
| 53 | Supplying, installation, testing and commissioning of fault isolator complete with base as required. |
| 54 | Supplying, installation, testing and commissioning of intelligent addressable programmable sounder complete as required. |
| 55 | Supplying, installation, testing and commissioning of addressable fire control module complete as required. |
| 56 | Supplying, installation, testing and commissioning of addressable phone control module complete as required. |
| 57 | Supplying, installation, testing and commissioning of addressable manual call point complete as required. |
| 58 | Supplying and laying of 2x1.5 sq mm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring and FRLS outer sheath complete as required. |
| 59 | Supplying and Fixing of battery operated illuminated EXIT signage, with 2hrs power Battery backup complete as required. |
| 60 | Supplying, installation, testing and commissioning of 1.5/ 3/ 6W ceiling speaker complete as required. |
| 61 | Supplying, installation, testing and commissioning of digital audio amplifier 75 Watt, 25V rms operating at 240 Volt AC Supply complete as required. |
| 62 | Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required. Speaker cable -Two pair, 2-core, 1.5sqmm |
| 63 | Supplying and fixing 25mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required. |
| 64 | Supplying, installation, testing and commissioning of repeater panel with 320 character/ Touch screen LCD display with inbuilt reset, acknowledge and silence switches complete as required. |
| 65 | Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required:-Single headed Gunmetal |
| 66 | Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipments on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket:- 30 m |
| 67 | Supplying and fixing 63mm dia, 15m long RRL hose pipe with 63mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required:-Gun Metal |
| 68 | Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:- Gun Metal |
| 69 | Providing and fixing standard fireman’s axe with heavy rubber handle |
| 70 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 4 way - 150 mm dia M.S. Pipe |
| 71 | Providing and fixing 4 mm thick glass door of size 2.1 m x 0.9 m with anodized aluminium frame of size 0.10 x 0.05 M with centre opening for fire hose cabinet. Suitably marked on the outside with the letters `FIRE HOSE` including locking arrangement. All aluminium work to be in Red P.O. colour. |
| 72 | Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer`s specifications - a) CO2 gas nozzle type - 9 Litres capacity (IS: 15683) |
| 73 | Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer`s specifications - b) Mechanical Foam gas cartridge type 9 Kg capacity (IS: 15683). |
| 74 | Providing and fixing ISI Marked of approved make Fire Extinguishers complete with all accessories as per manufacturer`s specifications - c) ABC dry powder stored pressure type 6 kg capacity (IS: 15683). |
| 75 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required. |
| 76 | Supplying, installation, testing and commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, centre bracket, stock bar of following sizes complete as required:- 1200 mm |
| 77 | Supplying Raphis Excelsa |
| 78 | Supplying Yucca Starlite. |
| 79 | Supplying Russelia Juncia. |
| 80 | Supplying Carissa Carandas (Karonda). |
| 81 | Supplying Ficus Longifolia |
| 82 | Supplying Galphima Glauca. |
| 83 | Supplying Tabernemontana (varigated). |
| 84 | Supplying Tabernemontana Coronaria. |
| 85 | Supplying Plumbago Capensis. |
| 86 | Supplying Tecamo Capensis. |
| 87 | Supplying Ficus Longisland. |
| 88 | Supplying Opiphogen Black. |
| 89 | Supplying Clerodendron Inerme. |
| 90 | Supplying Duranta Broadleaf. |
| 91 | Supplying Cuphea Minata. |
| 92 | Supplying Weddelia Trilobata. |
| 93 | Supply, Installation, Testing and Commissioning of CAT6 information outlet (I/O) for camera at user end. |
| 94 | Supply, Installation, Testing and Commissioning of loaded 24 port CAT6 jack panel for CAT6 cable termination at rack end. |
| 95 | Supply, Installation, Testing and Commissioning of CAT6 patch cord 3 feet for rack side switch to jack panel connectivity. |
| 96 | Supply, Installation, Testing and Commissioning of CAT6 patch cord 7 feet for information outlet (I/O) to end user device connectivity. |
| 97 | Supply, Installation, Testing and Commissioning of 1 port face plate white for I/O fixing at user side. |
| 98 | Supply , Installation , Testing and Commissioning of 3 MP Dome Camera , ONVIF profile S and G ,UL , CE , FCC Certified , 1/2.8` CMOS sensor ,3.6 mm fixed focal , triple stream ,Min Illumination :0.01 Lux @ (F1.2, AGC ON), 0.028 Lux @(F2.0, AGC ON), 0 Lux with IR, Shutter Speed : 1/5 ? 1 /100,000 s , Edge analytics : line crossing , perimeter intrusion , stationary object ,Video Compression : H.265 ,H.264 , frame rate 30 fps @ 3MP , Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object ,Inbuilt IR LED , IR distance upto 30 mtrs ,IP 66 , POE . |
| 99 | Supply, Installation, Testing and Commissioning of 3 MP Bullet Camera, ONVIF profile S and G, UL, CE, FCC Certified, 1/2.8` CMOS sensor, 3.6 mm fixed focal, triple stream, Min Illumination: 0.05 Lux @ (F1.2, AGC ON), 0 Lux with IR, Shutter Speed: 1/5 ? 1 /100,000 s, Video Compression: H.265, H.264, 120 dB WDR, frame rate 30 fps @ 3MP, Edge analytics: line crossing, perimeter intrusion, Face detection, cross counting, stationary object, In-built IR LED, IR distance upto 30 mtrs, IP 66, POE . |
| 100 | Supply, Installation, Testing and Commissioning of ONVIF profile S and G, UL certified 32 Channel NVR, 4 SATA ports, each SATA capacity of upto 8 TB, Recording Bandwidth 320 Mbps, 1 X HDMI, 1 X VGA, Alarm: 16ch in/ 1ch out, 1 X RJ45 port, 1x3.0 USB for backup/ upgrade, 2x 2.0 USB for mouse, Smart Phone support: iOS, Android. |
| 101 | Supply, Installation, Testing and Commissioning of 6TB Surveillance Hard Disk |
| 102 | Supply, Installation, Testing and Commissioning of 3MP IR IP H.265 High Speed PTZ dome camera with 30X Optical zoom, Accurate and fast focusing, WDR, Micro SD card slot, Smart analytics and 200M IR support, Intrusion detection, Cross line detection, Auto Tracking, Compatibility ONVIF (Profile S,G), API. |
| 103 | Supply, Installation, Testing and Commissioning of 40` Flat Screen HD led (24X7) with Interfaces include HDMI, DVI, D-sub, Component and Composite input as well as RS-232C and RJ45 for extensive connectivity, remote control and wall mount unit / floor stand complete with making connections etc complete as reqd. |
| 104 | Supply, Installation, Testing and Commissioning of Client workstation Processor Intel i7, 13th Gen, 4ghz or higher, OS genuine Window 11, Colour Monitor 22`, RAM 8GB DDR3 SDRAM, MEMORY 1TB HDD, 2GB GRAPHIC CARD complete as required |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
