Health And Family Welfare Department has published Tender For Proposed Construction Of 60 Bedded State Mental Hospital At Imphal. (Phase Ii). Submission Date for this Tender is 03-04-2024. Building Work Tenders in Imphal West Manipur. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Mar-2024 | Time Extension for Proposed Construction of 60 Bedded State Mental Hospital at Imphal. (Phase II) | Date | 03-04-2024 |
| Sl. No. | Item Description |
| 1 | SH: PILESWORK |
| 2 | Providing, driving with hydraulic piling rigs with power units and installing driven cast-in-situ reinforced cement concrete pile of grade M-25 of specific diameter and length below the pile cap, to carry safe working load not less than specified, excluding the cost of steel reinforcement but including the cost of shoeand the length of pile to be embedded in the pile cap etc. all complete. (Length of pile for payment shall be measured from top shoe to the bottom of pile cap) |
| 3 | 450 mm diameter piles |
| 4 | SH: EARTH WORK |
| 5 | Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5M including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50M |
| 6 | (a) All kinds of soil. |
| 7 | Demolition below G.L. upto 1 m.depth including stacking of serviceable materials and disposal of unserviceable materials within 50 m lead and including cutting the necessary reinforcement and separating out from R.C.C./R.B. work. |
| 8 | R.C.C. work |
| 9 | Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre |
| 10 | Filling in plinth with sandy soil under floors including watering ramming, consolidating and dressing complete. |
| 11 | CONCRETE WORK |
| 12 | Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 13 | RE-INFORCED CEMENT CONCRETE WORK |
| 14 | Reinforcement for R.C.C. work i/c. bending, binding and placing in position complete. |
| 15 | TMT Bars |
| 16 | Cement concrete for reinforced in pile cap i/c form work complete as per drawing and technical specifications. |
| 17 | M 30 grade |
| 18 | Reinforced cement concrete work in columns, pillars, piers, abutments, post and struts upto floor two level i/c plastering the exposed surface with cement 1:3 (1 cement:3 fine sand) of thickness not exceeding 6 mm thickness to give a smooth and even surface but excluding the cost of centering-shuttering & reinforcement |
| 19 | 1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20 mm nominal sizes |
| 20 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 21 | (b) 1:1.5:3 ( 1 cement :1.5 c/sand :3 graded stone aggreate 20 mm nominal size ) |
| 22 | Reinforced cement concrete work in chajjas upto floor two level i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement: 3 fine sand) to give a smooth and even surface, throating or plastered drip and moulding centering and shuttering but excluding cost of reinforcement with 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size). |
| 23 | Thickness not exceeding 15 cm. |
| 24 | Reinforced cement concrete work in spiral staircase (i/c landing ) etc. upto floor two level i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement:3 fine sand ) of thickness not exceeding 6 mm to give a-smooth and even surface, preparing the top surface and finishing nosing but excluding the cost of centering, shuttering-and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 25 | FORMWORK |
| 26 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in |
| 27 | Flat surface such as suspended floor, roofs landings and the like |
| 28 | floors etc. above 200m in thickness. |
| 29 | Sides or soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1m in depth. |
| 30 | Columns, pillars, posts and struts (square, rectangular or polygon in plan). |
| 31 | Stair cases with sloping or stepped, soffits i/c risers and stringers excluding landing |
| 32 | i) Edges of slab and breaks in floor walls |
| 33 | above 20 cm wide |
| 34 | BRICKWORK |
| 35 | 2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1 cement: 3 coarse sand) |
| 36 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure. |
| 37 | WOOD WORKS |
| 38 | Providing & fixing Uningthou wood stair case hollow post made of 20 mm thick planks i/c moulding. |
| 39 | Providing and fixing 75 x 60 mm moulded hand rail in straight lengths complete in Uningthou wood. |
| 40 | Providing & fixing 75 mm x 60 mm Uningthou caps turned to match the hand rails & mitred in i/c/hand rail screws & dowels (dia of cap to be twice the width of the hand rail 75 mm x 60 mm) |
| 41 | Providing & fixing bright finished brass 100 mm door mortice latch with one dead bolt & a pair of levers handles with necessary screws etc. complete (Indian make of approved quality). |
| 42 | STEEL WORKS |
| 43 | Aluminium glazed windows and ventilators of standard aluminium extrusion section joints mitred and riveted/screwed with 15x3 mm lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 (1 cement:3 coarse sand:6 stone aggregate 20 mm nominal size) or wooden plugs and screws of rawl plugs and screws or with fixing clips with bolts and nuts as required including providing and fixing ofglass panes 4 mm thick, projecting hinge, handles, peg stays, bolting devices, locking arrangements, spring catch & aluminium clip beading etc as required complete. |
| 44 | Ready made aluminium windows (side hung) |
| 45 | FLOORING |
| 46 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by manufactureer), with water absorption less than 0.08% and conforming to IS: 15622, of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) including grouting the joints with white cement and matcing pigments etc., complete. (SIze 1000x1000 mm). |
| 47 | White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3 (1 cement:3 coarse sand) & jointed with white cement slurry.(Size 600x1200 mm) |
| 48 | RAIN WATER PIPE |
| 49 | Providing and fixing on wall face PVCwater pipe i/c filling the joints with spun yarn soaked in neat cement slury & cement mortar 1:4 (1cement: 2 find sand) |
| 50 | (a) 75 mm dia |
| 51 | Providing and fixing M.S. holder bad clamps embaded in and including cement concrete block 112,5 mmx112.5mm of 1:2:4 mixed( 1cement: 2coarse sand:4 hard stone ballast 20mm & down guage) |
| 52 | (a)100mm dia |
| 53 | FINISHING |
| 54 | 12 mmcement mortar 1:4 (1 cement :4f/sand ) |
| 55 | External wall |
| 56 | 15 mm cementplaster 1:4 (1cement :4 f/sand ) |
| 57 | Internal walls |
| 58 | 15mm cement plaster 1:3 (1cement :3 coarse sand) finished with afloating coat of neat cement |
| 59 | DISTEMPERING |
| 60 | Distempering two or more coats with oil bound washable distemper of approved quality on new work I/c priming coat to give an even shade. |
| 61 | Internal walls |
| 62 | PLASTIC EMULSION PAINT |
| 63 | Painting (two or more coats) with plastic emulsion paint of approved quality on new work except walls to give an even shade. |
| 64 | External wall |
| 65 | PLASTER OF PARIS |
| 66 | Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 67 | PRIMING COAT |
| 68 | Applying ready mix priming coat,pink primer of approved quality on wood work |
| 69 | Applying ready mixed priming coat (genware red lead of approved quality ) on steel work. |
| 70 | SYNTHETIC ENAMEL PAINT |
| 71 | Painting (two or more coats) with synthetic enamel paint of approved qualityof black or choclate colour on woodwork to give an even shade. |
| 72 | MISCELLANEOUS |
| 73 | Providing plinth protection 50mm thick in cement concrete1:3:6(1cement:3coarse sand :6 graded stone aggregate of 20mm nominal size) i/c finishing the top of concrete smooth. |
| 74 | Providing under layer for plinth protection opf 75mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground. |
| 75 | INTERNAL ELECTRIFICATION & INSTALLATION |
| 76 | Wiring for light/Fan point/Exhaust Fan point/Call bell point with 1.5mm²FRPVC insulated copper conductor single core cable in surface/recessed steel conduit with modular type switch modular plate,suitable G.I.box and earthing the point with 1.5mm²FRPVC insulated copper conductor single core cable etc.as required. |
| 77 | 1) Gr. A |
| 78 | 2) Gr. B |
| 79 | Suitable size GI box with modular plate and in front on surface or in recess i/c p/f 6 pin 16/15 amp modular socket outlet 15/16 amp modular switch, connection painting etc as required |
| 80 | s/f suitable size G.I box with modular plate and cover infront on surface or recess i/c p/f 3pin 5/6 amp modular socket outlet 5/6 amp modular switch connection painting etc as regd. |
| 81 | (1.7) Wiring for circuit/sub-main wiring along with earth wire with the (following size of ) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc. as reqd. |
| 82 | 2) 2x1.5mm² +1x1.5mm² Earthwire |
| 83 | 3)2x4mm²+1x4mm² Earthwire |
| 84 | 4)2x6mm²+1x6mm² Earthwire |
| 85 | (1.87) S/F (following way) single pole and neutral, sheet steel MCCB DB 240v on surface/recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connection, phosphatised and power painted including earthing etc. as required (but without MCB/RCCB/isolator) |
| 86 | (1) 2 + 4way |
| 87 | (1.107) S/F 5amp to 32 amp rating 230V “B” series for lighting and other purposes, load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as required. |
| 88 | (2) Single pole and neutral |
| 89 | (1.109) S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. |
| 90 | (1) 40 Amp |
| 91 | (2)63 Amp |
| 92 | (1.84) P/F (following capacity TP&N) dis-connector fuse switch unit inside the exiting cubicle panel board with I.S.I mark HRC fuses i/c drilling holes in the cubicle panel board making connection as regd. |
| 93 | (3) 100 Amp TP&N |
| 94 | (2.02) P/F125Amp TPN stand ground on load change own switch (compact design) 415/500 v including connection to as required. |
| 95 | (8.01) S/F 48” sweep (1200mm)a.c ceiling fan complete with down rod, canopy, 3 Blades but without regulator etc. as reqd. (Havells or similar 5 star) |
| 96 | 1.62) S/F stepped type electronic fan regulator on the modular plate switch box i/c connection but excluding modular plate as reqd. |
| 97 | (8.52) S/F recess mounting LED down lighter BGSL 0301WH 220225 Cast alluminium housing, fixed with collinated lens 3X1W white Ledmounted on MCPCB, extruded alluminium heat sink, spring loaded mounting clips, complete with connection etc. as reqd. |
| 98 | WATER SUPPLY & SANITARY INSTALLATION |
| 99 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 metres in width as well as 10 sqm on plan i/c disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposal soil to be levelled and neatly dressed in |
| 100 | Filling available excavated earth in trences,plinth, sides of foundations, etc in layers noy exceedinfg 20cm in depth,consolidating each de[posited layer by rammring and watering, lead upto 50m and lift upto 1.5m |
| 101 | Providing and laying in position cement concrete of specified grade excluding the cost centering and shuttering- All work upto plinth level. |
| 102 | 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 103 | Half brick masonry 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure. |
| 104 | Providing and laying in position specified grade of reinforced cement concreteexcluding the cost centeringshuttering- All work upto plinth level.Reinforced cement concrete work in foundation footings, bases of columns etc. and mass concrete, excluding cost of centering, shuttering and reinforcement, |
| 105 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 106 | Reinforced cement concrete work in beams,suspended floors, roofs having slope upto 15 degree landings, shelves & their supports balconies,chajjas, lintels, bands, plain window sill, stair cases and spiral stair cases upto floor 5 level excluding the cost of centering , shuttering finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse:3 graded stone aggregate 20mm nominal size). |
| 107 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in |
| 108 | Foundation, footings, bases of columns etc. and mass concrete. |
| 109 | Flat surface…….. |
| 110 | i) Edges of slab and breaks in floor walls |
| 111 | under 20 cm wide |
| 112 | Reinforcementfor R.C.C work including straightening ,cutting, bending,placing in position and binding all complete. |
| 113 | Thermo-Mechanically Treated bars. |
| 114 | 20 mm cement plaster 1:3 (1cement :3 coarse sand) finished with afloating coat of neat cement |
| 115 | Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. |
| 116 | 1000 litres net capacity storage tanks |
| 117 | White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3 (1 cement:3 coarse sand) & jointed with white cement slurry. |
| 118 | Providingand fixing water closet squatting pan (Indian type W.C. pan ) with 100 mmsand cast Iron P or S trap, 10 litre low levelwhiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 119 | Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests |
| 120 | P/F urinal basin of white glazed earthen ware (Indian make) with 5 litres C.I. Automatic flushing cistern with fitting R.S. or C.I. Brackets,standard size, flush pipe spreader with brass union G.I. Clamp complete, including painting of cistern and fitting cutting and making good the wall and floors. |
| 121 | a)Flat back Urinal |
| 122 | 464 x 355 x 265 mm |
| 123 | Providing and Fixing wash basin of white glazed earthen ware (Indian make) with R.S. or C.I. brackets painted white 1 central 12.5 mm C.P. brass pillar tapes, 32 mm rubber plugs and C.P. brass chain 32 mm C.P. brass waist-of standard pattern 32 mm diameter M.I. or C.P. brass traps and unions complete i/c cutting and making good the walls (Indian fittings). |
| 124 | a) 630 x 450 mm |
| 125 | P/F kitchen sink white glazed vitreous china (Indian make) with R.S. or C.I. Brackets painted white, a pair of 12.5 mm C.P. brass pillar taps, 323 rubber plugs and C.P. brass chain 32 mm C.P. brass waste of standard pattern, 32 mm dia M.I. Or C.P. brass traps and unions complete i/c cutting and making good the walls indian fittings. |
| 126 | Providing and fixing 600 x 20 mm SONAC.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P.brass screws (Hook type SONA) |
| 127 | Providing and fixing 600 x 450 mm bevelled edge mirror of Indian make superior glass (of approved quality) quality complete with asbestos sheet ground, fixed to wooden cleat with C.P. brass screws and washers. |
| 128 | Providing and fixing in position 2.5 mm diameter mosquito proof coupling of approved Municipal design. |
| 129 | Centre Hole Mixer H.N. Deluxe. |
| 130 | Providing and fixing M.I. union fisher |
| 131 | a) 32 mm |
| 132 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms. |
| 133 | Providing and fixing a pair of white glazed earthen foot rest of standard pattern for Indian type W.C. pan. |
| 134 | Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws. |
| 135 | ProvidingandfixingP.V.C.wastepipeforsinkorwashbasin including P.V.C. waste fittings complete. |
| 136 | White Vitreous China Angle back wash basin size 600 x 480 mm with single 15 mm C.P. brass pillar tap |
| 137 | Providing and fixing lead caulked joints to 100 mm HCI pipes |
| 138 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 139 | 100 mm nominal outer dia Pipes |
| 140 | P/F 50 mm dia normal guage polythene pipes of approved quality complete with special flange compression type fittings (of approved make) including trenching and refilling etc (external works). |
| 141 | P/F brass stop cock of superior quality |
| 142 | Providing and fixing Polythene-Aluminium- Propylene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. with carbon black havingthermal stability for hot & cold water supply,capable to with stand temperature up to 80 degree centrigate, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 m spacing. This includesthe costs of cutting chases and including testing of joints complete as per direction of Engineer in charge.Concealed work, i/c cutting chases and making good the wall etc.) |
| 143 | (a)1216 (16 mm OD) pipe |
| 144 | (b)1620 (20 mm OD) pipe |
| 145 | (c)2025 (25 mm OD) pipe |
| 146 | (d)2532 (32 mm OD) pipe |
| 147 | Providing and fixing Chlorinated Polyviny Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge ( External works etc.) |
| 148 | 50mm |
| 149 | Making connection of GI distribution branch with GI main 25 mm to 40 mm diameter by providing & fixing Tees i/c cutting and threading the pipe etc complete. |
| 150 | Providing and fixing C.P. bib cock of superior quality. |
| 151 | (a) 20 mm diameter |
| 152 | Providing and fixing brass stop cock of superior quality. |
| 153 | (a)15 mm diameter (Delux Sona) |
| 154 | Providing and fixing non-return value of superior quality. (32mm diameter) |
| 155 | Sub Head : Barrak Type Quarter |
| 156 | EARTH WORKS: |
| 157 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. |
| 158 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 159 | Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete. |
| 160 | Providing and laying cement concrete in foundation & plinth excluding the cost of centering & shuttering. |
| 161 | 1:4:8 (1 Cement:4 coarse sand:8 graded stone aggregate: 40 mm nominal size) |
| 162 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 163 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.. |
| 164 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering --All work upto plinth level: |
| 165 | (a).1:1.5:3 (1 Cement : 1.5 coarse sand :3graded stone aggregate 20 mm nominal size). |
| 166 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level upto floor five level excluding cost of centering,shuttering, finishing and reinforcement : (a)1:1.5:3(1 Cement : 1.5 k/coarse sand :3 graded stone aggregate 20 mm nominal size). |
| 167 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 168 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level & above plinth lvl .a) Thermo-Mechanically Treated bars. |
| 169 | FORMWORK |
| 170 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 171 | Foundations, footings, bases of columns, etc. for mass concrete |
| 172 | Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 173 | Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 174 | Stairs, (excluding landings) except spiral-staircases. |
| 175 | BRICKWORK |
| 176 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 177 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level inin cement mortar 1:3 ( 1 cement : 3 c/sand ) |
| 178 | Brick edging 7cm wide 11.4cm deep to plinth protection with Ist class common burnt clay F.P.S. (non modular) bricks including grouting with cement mortar 1:4 (1 cement: 4 fine sand). |
| 179 | WOODWORK |
| 180 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately :Local best quality Uningthou wood |
| 181 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick :Local best quality Tolhao wood |
| 182 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. |
| 183 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 184 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 185 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 186 | 250 x 10 mm |
| 187 | Providing and fixing aluminium handles, ISI marked,anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 188 | 125 mm |
| 189 | STEEL WORK |
| 190 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying coat of approved steel primer all complete. |
| 191 | In M.S. Flat/Plate |
| 192 | In channel, angles & tees. |
| 193 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry@3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Double charge vitrified tile polished finish of size |
| 194 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of stepts , over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand), jointing with grey cement slurry @ 3.3kg/sqmincluding grouting the joint with white cement & matching pigments etc. complete. |
| 195 | Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS :15622 of approved make in colours White, Ivory, Grey, Fume Red,, Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete. |
| 196 | Marble stone flooring with18mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with : |
| 197 | Raj Nagar plain. |
| 198 | 60 x 60 cm |
| 199 | Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (polished) Raj Nagar. |
| 200 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal,complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with |
| 201 | Precoated galvanised iron profile sheets0.50 mm thick |
| 202 | Providing and fixing precoated galvanised steel sheet roofing accessories , Zinc coating 120gsm as per IS: 277 in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers complete :Ridges plain (500 - 600mm). |
| 203 | Precoated galvanised iron profile sheets0.50 mm thick |
| 204 | Steel work in built up tubular(round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes. |
| 205 | Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections, power pressed from M.S. sheet and galvanised with zinc coating of 120 gms/ sqm (both sided inclusive) as per IS : 277 and consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm diax50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x25x0.55mm of required length with nuts and bolts of required size and the other end of the angle hanger fixed with intermediate G.I. channels 45x15x0.9mm running at the spacing of 1200mm centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diax230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre, with 25mm long drive-all screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishng to a flush finish of tapered and square edges of the board with recommended jointing compound,jointing tapes, finishing with jointing compund in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board,all as per manufacturer"s specification and also including the cost of making openings for light fittings, grills, diffusers,cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, and specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I, |
| 206 | 12 mm cement plaster 1:4(1 cement:4 finesand). |
| 207 | 15 mm cement plaster on rough side of single or half brick wall of mix:- (1 cement:4 coarsesand). |
| 208 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including priming coat with cement primer. |
| 209 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 210 | Finishing walls with textured exterior paint of required shade: |
| 211 | New work (Two or more coat applied @ 3.28 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/10 sqm) |
| 212 | Applying priming coat :- With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 213 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. |
| 214 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 215 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture. |
| 216 | EAVE BOARD |
| 217 | Providing and fixing 20mm plank as eave board with. |
| 218 | Uningthou wood. |
| 219 | Applying priming coat :- With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 220 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture |
| 221 | WS&SI |
| 222 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 metres in width as well as 10 sqm on plan i/c disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposal soil to be levelled and neatly dressed in |
| 223 | Filling available excavated earth in trences,plinth, sides of foundations, etc in layers noy exceedinfg 20cm in depth,consolidating each de[posited layer by rammring and watering, lead upto 50m and lift upto 1.5m |
| 224 | Providing and laying in position cement concrete of specified grade excluding the cost centering and shuttering- All work upto plinth level. |
| 225 | 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 226 | Providing and laying in position specified grade of reinforced cement concreteexcluding the cost centeringshuttering- All work upto plinth level.Reinforced cement concrete work in foundation footings, bases of columns etc. and mass concrete, excluding cost of centering, shuttering and reinforcement, |
| 227 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 228 | Reinforced cement concrete work in beams,suspended floors, roofs having slope upto 15 degree landings, shelves & their supports balconies,chajjas, lintels, bands, plain window sill, stair cases and spiral stair cases upto floor 5 level excluding the cost of centering , shuttering finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse:3 graded stone aggregate 20mm nominal size). |
| 229 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in |
| 230 | Foundation, footings, bases of columns etc. and mass concrete. |
| 231 | Flat surface…….. |
| 232 | i) Edges of slab and breaks in floor walls |
| 233 | under 20 cm wide |
| 234 | Reinforcementfor R.C.C work including straightening ,cutting, bending,placing in position and binding all complete. |
| 235 | Thermo-Mechanically Treated bars. |
| 236 | 20 mm cement plaster 1:3 (1cement :3 coarse sand) finished with afloating coat of neat cement |
| 237 | Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. |
| 238 | 1000 litres net capacity storage tanks |
| 239 | Providingand fixing water closet squatting pan (Indian type W.C. pan ) with 100 mmsand cast Iron P or S trap, 10 litre low levelwhiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 240 | Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests |
| 241 | P/F urinal basin of white glazed earthen ware (Indian make) with 5 litres C.I. Automatic flushing cistern with fitting R.S. or C.I. Brackets,standard size, flush pipe spreader with brass union G.I. Clamp complete, including painting of cistern and fitting cutting and making good the wall and floors. |
| 242 | a)Flat back Urinal |
| 243 | 464 x 355 x 265 mm |
| 244 | Providing and Fixing wash basin of white glazed earthen ware (Indian make) with R.S. or C.I. brackets painted white 1 central 12.5 mm C.P. brass pillar tapes, 32 mm rubber plugs and C.P. brass chain 32 mm C.P. brass waist-of standard pattern 32 mm diameter M.I. or C.P. brass traps and unions complete i/c cutting and making good the walls (Indian fittings). |
| 245 | a) 630 x 450 mm |
| 246 | P/F kitchen sink white glazed vitreous china (Indian make) with R.S. or C.I. Brackets painted white, a pair of 12.5 mm C.P. brass pillar taps, 323 rubber plugs and C.P. brass chain 32 mm C.P. brass waste of standard pattern, 32 mm dia M.I. Or C.P. brass traps and unions complete i/c cutting and making good the walls indian fittings. |
| 247 | Providing and fixing 600 x 20 mm SONAC.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P.brass screws (Hook type SONA) |
| 248 | Providing and fixing 600 x 450 mm bevelled edge mirror of Indian make superior glass (of approved quality) quality complete with asbestos sheet ground, fixed to wooden cleat with C.P. brass screws and washers. |
| 249 | Providing and fixing in position 2.5 mm diameter mosquito proof coupling of approved Municipal design. |
| 250 | Centre Hole Mixer H.N. Deluxe. |
| 251 | Providing and fixing M.I. union fisher |
| 252 | a) 32 mm |
| 253 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms. |
| 254 | Providing and fixing a pair of white glazed earthen foot rest of standard pattern for Indian type W.C. pan. |
| 255 | Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws. |
| 256 | ProvidingandfixingP.V.C.wastepipeforsinkorwashbasin including P.V.C. waste fittings complete. |
| 257 | White Vitreous China Angle back wash basin size 600 x 480 mm with single 15 mm C.P. brass pillar tap |
| 258 | Providing and fixing lead caulked joints to 100 mm HCI pipes |
| 259 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 260 | 100 mm nominal outer dia Pipes |
| 261 | P/F 50 mm dia normal guage polythene pipes of approved quality complete with special flange compression type fittings (of approved make) including trenching and refilling etc (external works). |
| 262 | P/F brass stop cock of superior quality |
| 263 | Providing and fixing Polythene-Aluminium- Propylene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. with carbon black havingthermal stability for hot & cold water supply,capable to with stand temperature up to 80 degree centrigate, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 m spacing. This includesthe costs of cutting chases and including testing of joints complete as per direction of Engineer in charge.Concealed work, i/c cutting chases and making good the wall etc.) |
| 264 | (a)1216 (16 mm OD) pipe |
| 265 | (b)1620 (20 mm OD) pipe |
| 266 | (c)2025 (25 mm OD) pipe |
| 267 | (d)2532 (32 mm OD) pipe |
| 268 | Providing and fixing Chlorinated Polyviny Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge ( External works etc.) |
| 269 | 50mm |
| 270 | Making connection of GI distribution branch with GI main 25 mm to 40 mm diameter by providing & fixing Tees i/c cutting and threading the pipe etc complete. |
| 271 | Providing and fixing C.P. bib cock of superior quality. |
| 272 | (a) 20 mm diameter |
| 273 | Providing and fixing brass stop cock of superior quality. |
| 274 | (a)15 mm diameter (Delux Sona) |
| 275 | Providing and fixing non-return value of superior quality. (32mm diameter) |
| 276 | IEI |
| 277 | Wiring for light/Fan point/Exhaust Fan point/Call bell point with 1.5mm²FRPVC insulated copper conductor single core cable in surface/recessed steel conduit with modular type switch modular plate,suitable G.I.box and earthing the point with 1.5mm²FRPVC insulated copper conductor single core cable etc.as required. |
| 278 | 1) Gr. A |
| 279 | 2) Gr. B |
| 280 | Suitable size GI box with modular plate and in front on surface or in recess i/c p/f 6 pin 16/15 amp modular socket outlet 15/16 amp modular switch, connection painting etc as required |
| 281 | s/f suitable size G.I box with modular plate and cover infront on surface or recess i/c p/f 3pin 5/6 amp modular socket outlet 5/6 amp modular switch connection painting etc as regd. |
| 282 | (1.7) Wiring for circuit/sub-main wiring along with earth wire with the (following size of ) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc. as reqd. |
| 283 | 2) 2x1.5mm² +1x1.5mm² Earthwire |
| 284 | 3)2x4mm²+1x4mm² Earthwire |
| 285 | (1.87) S/F (following way) single pole and neutral, sheet steel MCCB DB 240v on surface/recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connection, phosphatised and power painted including earthing etc. as required (but without MCB/RCCB/isolator) |
| 286 | (1) 2 + 4way |
| 287 | (1.107) S/F 5amp to 32 amp rating 230V “B” series for lighting and other purposes, load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as required. |
| 288 | (2) Single pole and neutral |
| 289 | (1.109) S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. |
| 290 | (1) 40 Amp |
| 291 | (2)63 Amp |
| 292 | (1.84) P/F (following capacity TP&N) dis-connector fuse switch unit inside the exiting cubicle panel board with I.S.I mark HRC fuses i/c drilling holes in the cubicle panel board making connection as regd. |
| 293 | (3) 100 Amp TP&N |
| 294 | (2.02) P/F125Amp TPN stand ground on load change own switch (compact design) 415/500 v including connection to as required. |
| 295 | (8.01) S/F 48” sweep (1200mm)a.c ceiling fan complete with down rod, canopy, 3 Blades but without regulator etc. as reqd. (Havells or similar 5 star) |
| 296 | 1.62) S/F stepped type electronic fan regulator on the modular plate switch box i/c connection but excluding modular plate as reqd. |
| 297 | 305mm sweep exhaust fan complete with all accessories connection etc as required |
| 298 | (1.71) S/F brass batten holder i/c connection etc. as reqd. |
| 299 | LED white lamp 18w |
| 300 | (8.52) S/F recess mounting LED down lighter BGSL 0301WH 220225 Cast alluminium housing, fixed with collinated lens 3X1W white Ledmounted on MCPCB, extruded alluminium heat sink, spring loaded mounting clips, complete with connection etc. as reqd. |
| 301 | Land Development |
| 302 | Excavation in soil by manual means. (Excavation for roadway in soil using manual means including loading in truck for carrying of cut earth to embankment site with all lifts and lead upto 1000 meters. |
| 303 | Sub Head:EEI Barrack Type Quarter. |
| 304 | (18) 9m long steel tubuler pole (410 SP-14) |
| 305 | (7.01) Erection of steel tubular pole of length not less than 8m but not exceeding 10ms in cement concrete 1:3:6 (1 cement :3 coarse sand : 6graded stone aggregate 40mm nominal size) foundation i/c excation and refiling etc as required. |
| 306 | (1.7) wiring for circuit/ submain wiring along with earth wire with the (following size of) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc as reqd. |
| 307 | 3) 2x4.0mm²+ 1x4.0mm² Earth wire |
| 308 | (3) S/F2.5 m long G.I bracket and pipe for fixing street lamp and lamp post. |
| 309 | (1.87) S/F (following way) single pole and neutral, sheet steel MCCB DB 240 v on surface /recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connnection, phosphatised and power painted including earthing etc, as required ( but without MCB/RCCB/ isolator) |
| 310 | (1) 2 + 4 way |
| 311 | (1.107) S/F 5amp to 32 amp rating 230 V "B" series for lighting and other purposes, load of (following poles)in the existing MCB DB complete with connection, testing and commissioning etc as required. |
| 312 | (2)Single pole and neutral |
| 313 | (1.109) S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. |
| 314 | (1) 40 Amp |
| 315 | P/F 50w street Lamp (Panasonic,Bajaj or Philips) |
| 316 | MAIN GATE |
| 317 | EARTHWORK |
| 318 | Earth work in excavation by mechanical means (Hydraulic Excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. a) All kinds of soil. |
| 319 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 320 | Supplying and filling in plinth with sandy soil under floors including, watering,ramming consolidating and dressing complete. |
| 321 | CONCRETE WORK |
| 322 | Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering in a).1:4:8 (1 cement : 4 coarse sand :8 graded stone aggregate 40 mm nominal size) |
| 323 | DAMP-PROOF COURSE |
| 324 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size). |
| 325 | Extra for providing and mixing water proofing material in cement concrete work @1 kg per 50 kg of cement. |
| 326 | Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil. |
| 327 | RE-INFORCED CEMENT CONCRETE WORK |
| 328 | Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level: |
| 329 | 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 330 | Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15° landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with |
| 331 | 1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size) |
| 332 | Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, column, pillars, piers, abutments, posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement: |
| 333 | 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 334 | STEEL REINFORCEMENT |
| 335 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.(Thermo-Mechanically Treated bars |
| 336 | BRICKWORK |
| 337 | Brick work with Ist class common burnt clay F.P.S. (non modular) bricksin foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 338 | HALF BRICK MASONRY |
| 339 | Half brick masonry with Ist class common burnt clay F.P.S. (non modular) bricksin superstructure above plinth level upto floor V level in Cement mortar 1 : 4 (1 cement : 4 coarse sand) |
| 340 | FORMWORK |
| 341 | Centering and shuttering including strutting, propping etc. and removal of form for: |
| 342 | (a)Foundations, footings, bases of columns, etc. for mass concrete. |
| 343 | (b).Suspended floors, roofs, landings, balconies and access platform, with water proof ply 12mm thick |
| 344 | (c) Columns, Pillars, Piers, Abutments, Posts and Struts. |
| 345 | (d) Lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 346 | STEEL WORK |
| 347 | Providing and fixing M.S. fan clamp type I or II of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. |
| 348 | Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint. (a) In gratings, framed guard bars, ladders, railings, brackets and similar works. |
| 349 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying coat of approved steel primer all complete. |
| 350 | WOOD WORKS |
| 351 | Providing wood work in frames of doors, windows, clerestory windows and other frames,wrought framed and fixed in position with hold fast lugs or with dash fastener of required dia and length (hold fast lugs or dash fastener shall be paid for separately : Local best quality TEAK wood |
| 352 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Local best quality Teak Wood |
| 353 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10 x 15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
| 354 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). |
| 355 | Providing and fixing bright finished brass towerbolts (barrel type)with necessary screws etc. complete :250x10 mm |
| 356 | Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm |
| 357 | Providing and fixing bright finished brass handles with screws etc. complete :125 mm |
| 358 | FLOORING |
| 359 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry@3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 360 | Providing and laying Vitrified tiles in different sizes (thickness to be speciied by manufacturer ) ,with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc.,complete.Size of Tile -600 x600mm. |
| 361 | FINISHING |
| 362 | 12 mmcement plaster of mix : 1:4 (1 cement : 4 fine sand) |
| 363 | 15 mm cement plaster on rough side of single or half brick wall of mix:-1:4 (1 cement : 4 fine sand) |
| 364 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS :5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 75mm dia. |
| 365 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs,screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4(1 cement: 4 coarse sand) and making good the wall etc. complete.. 75 mm dia. |
| 366 | CEMENT PAINTING - ORDINARY |
| 367 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer |
| 368 | Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm) |
| 369 | Providing and applying white cement based putty of average thickness 1mm,of approved brand and manufacturer, over the plastered wall surface to preparethe surface even and smooth complete. |
| 370 | Applying priming coat :-With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) |
| 371 | Applying priming coat :- With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works:- |
| 372 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 373 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarsesand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.h |
| 374 | WATER SUPPLY & SANITARY INSTALLATION |
| 375 | Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 metres in width as well as 10 sqm on plan i/c disposal of excavated earth lead upto 50 m and lift upto 1.5 m disposal soil to be levelled and neatly dressed in |
| 376 | Filling available excavated earth in trences,plinth, sides of foundations, etc in layers noy exceedinfg 20cm in depth,consolidating each de[posited layer by rammring and watering, lead upto 50m and lift upto 1.5m |
| 377 | Providing and laying in position cement concrete of specified grade excluding the cost centering and shuttering- All work upto plinth level. |
| 378 | 1:4:8 (1 cement :4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 379 | Providing and laying in position specified grade of reinforced cement concreteexcluding the cost centeringshuttering- All work upto plinth level.Reinforced cement concrete work in foundation footings, bases of columns etc. and mass concrete, excluding cost of centering, shuttering and reinforcement, |
| 380 | 1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size). |
| 381 | Reinforced cement concrete work in beams,suspended floors, roofs having slope upto 15 degree landings, shelves & their supports balconies,chajjas, lintels, bands, plain window sill, stair cases and spiral stair cases upto floor 5 level excluding the cost of centering , shuttering finishing and reinforcement with 1:1.5:3 ( 1 cement : 1.5 coarse:3 graded stone aggregate 20mm nominal size). |
| 382 | Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in |
| 383 | Foundation, footings, bases of columns etc. and mass concrete. |
| 384 | Flat surface…….. |
| 385 | i) Edges of slab and breaks in floor walls |
| 386 | under 20 cm wide |
| 387 | Reinforcementfor R.C.C work including straightening ,cutting, bending,placing in position and binding all complete. |
| 388 | Thermo-Mechanically Treated bars. |
| 389 | 20 mm cement plaster 1:3 (1cement :3 coarse sand) finished with afloating coat of neat cement |
| 390 | Providing and fixing WATER STORAGE TANKS (Sintex) with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. |
| 391 | 1000 litres net capacity storage tanks |
| 392 | Providingand fixing water closet squatting pan (Indian type W.C. pan ) with 100 mmsand cast Iron P or S trap, 10 litre low levelwhiteP.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 393 | Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests |
| 394 | P/F urinal basin of white glazed earthen ware (Indian make) with 5 litres C.I. Automatic flushing cistern with fitting R.S. or C.I. Brackets,standard size, flush pipe spreader with brass union G.I. Clamp complete, including painting of cistern and fitting cutting and making good the wall and floors. |
| 395 | a)Flat back Urinal |
| 396 | 464 x 355 x 265 mm |
| 397 | Providing and Fixing wash basin of white glazed earthen ware (Indian make) with R.S. or C.I. brackets painted white 1 central 12.5 mm C.P. brass pillar tapes, 32 mm rubber plugs and C.P. brass chain 32 mm C.P. brass waist-of standard pattern 32 mm diameter M.I. or C.P. brass traps and unions complete i/c cutting and making good the walls (Indian fittings). |
| 398 | a) 630 x 450 mm |
| 399 | P/F kitchen sink white glazed vitreous china (Indian make) with R.S. or C.I. Brackets painted white, a pair of 12.5 mm C.P. brass pillar taps, 323 rubber plugs and C.P. brass chain 32 mm C.P. brass waste of standard pattern, 32 mm dia M.I. Or C.P. brass traps and unions complete i/c cutting and making good the walls indian fittings. |
| 400 | Providing and fixing 600 x 20 mm SONAC.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P.brass screws (Hook type SONA) |
| 401 | Providing and fixing 600 x 450 mm bevelled edge mirror of Indian make superior glass (of approved quality) quality complete with asbestos sheet ground, fixed to wooden cleat with C.P. brass screws and washers. |
| 402 | Providing and fixing in position 2.5 mm diameter mosquito proof coupling of approved Municipal design. |
| 403 | Centre Hole Mixer H.N. Deluxe. |
| 404 | Providing and fixing M.I. union fisher |
| 405 | a) 32 mm |
| 406 | Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms. |
| 407 | Providing and fixing a pair of white glazed earthen foot rest of standard pattern for Indian type W.C. pan. |
| 408 | Providing and fixing soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws. |
| 409 | ProvidingandfixingP.V.C.wastepipeforsinkorwashbasin including P.V.C. waste fittings complete. |
| 410 | White Vitreous China Angle back wash basin size 600 x 480 mm with single 15 mm C.P. brass pillar tap |
| 411 | Providing and fixing lead caulked joints to 100 mm HCI pipes |
| 412 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. |
| 413 | 100 mm nominal outer dia Pipes |
| 414 | P/F 50 mm dia normal guage polythene pipes of approved quality complete with special flange compression type fittings (of approved make) including trenching and refilling etc (external works). |
| 415 | P/F brass stop cock of superior quality |
| 416 | Providing and fixing Polythene-Aluminium- Propylene PE-AL-PE Composite Pressure Pipes conforming to IS - 15450, U.V. with carbon black havingthermal stability for hot & cold water supply,capable to with stand temperature up to 80 degree centrigate, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 m spacing. This includesthe costs of cutting chases and including testing of joints complete as per direction of Engineer in charge.Concealed work, i/c cutting chases and making good the wall etc.) |
| 417 | (a)1216 (16 mm OD) pipe |
| 418 | (b)1620 (20 mm OD) pipe |
| 419 | (c)2025 (25 mm OD) pipe |
| 420 | (d)2532 (32 mm OD) pipe |
| 421 | Providing and fixing Chlorinated Polyviny Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threadedfittings. This includes jointing of pipes & fitting with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge ( External works etc.) |
| 422 | 50mm |
| 423 | Making connection of GI distribution branch with GI main 25 mm to 40 mm diameter by providing & fixing Tees i/c cutting and threading the pipe etc complete. |
| 424 | Providing and fixing C.P. bib cock of superior quality. |
| 425 | (a) 20 mm diameter |
| 426 | Providing and fixing brass stop cock of superior quality. |
| 427 | (a)15 mm diameter (Delux Sona) |
| 428 | Providing and fixing non-return value of superior quality. (32mm diameter) |
| 429 | INTERNAL ELECTRIFICATION & INSTALLATION |
| 430 | Wiring for light/Fan point/Exhaust Fan point/Call bell point with 1.5mm²FRPVC insulated copper conductor single core cable in surface/recessed steel conduit with modular type switch modular plate,suitable G.I.box and earthing the point with 1.5mm²FRPVC insulated copper conductor single core cable etc.as required. |
| 431 | 1) Gr. A |
| 432 | 2) Gr. B |
| 433 | Suitable size GI box with modular plate and in front on surface or in recess i/c p/f 6 pin 16/15 amp modular socket outlet 15/16 amp modular switch, connection painting etc as required |
| 434 | s/f suitable size G.I box with modular plate and cover infront on surface or recess i/c p/f 3pin 5/6 amp modular socket outlet 5/6 amp modular switch connection painting etc as regd. |
| 435 | (1.7) Wiring for circuit/sub-main wiring along with earth wire with the (following size of ) FRPVC insulated copper conductor single core cable in surface/recessed steel conduit etc. as reqd. |
| 436 | 2) 2x1.5mm² +1x1.5mm² Earthwire |
| 437 | 3)2x4mm²+1x4mm² Earthwire |
| 438 | (1.87) S/F (following way) single pole and neutral, sheet steel MCCB DB 240v on surface/recessed complete with tinned copper busbar, neutral busbar, earthbar, dinbar, hinged front acrylie cover for the MCCB knobs datacable grand plate, enter connection, phosphatised and power painted including earthing etc. as required (but without MCB/RCCB/isolator) |
| 439 | (1) 2 + 4way |
| 440 | (1.107) S/F 5amp to 32 amp rating 230V “B” series for lighting and other purposes, load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as required. |
| 441 | (2) Single pole and neutral |
| 442 | (1.109) S/F (following rating) double pole 240 V isolator in the existing MCB DB complete with connection testing and commissioning as required. |
| 443 | (1) 40 Amp |
| 444 | (2)63 Amp |
| 445 | (1.84) P/F (following capacity TP&N) dis-connector fuse switch unit inside the exiting cubicle panel board with I.S.I mark HRC fuses i/c drilling holes in the cubicle panel board making connection as regd. |
| 446 | (3) 100 Amp TP&N |
| 447 | (8.01) S/F 48” sweep (1200mm)a.c ceiling fan complete with down rod, canopy, 3 Blades but without regulator etc. as reqd. (Havells or similar 5 star) |
| 448 | 1.62) S/F stepped type electronic fan regulator on the modular plate switch box i/c connection but excluding modular plate as reqd. |
| 449 | (8.52) S/F recess mounting LED down lighter BGSL 0301WH 220225 Cast alluminium housing, fixed with collinated lens 3X1W white Ledmounted on MCPCB, extruded alluminium heat sink, spring loaded mounting clips, complete with connection etc. as reqd. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
