|
| 1 | Dismantling of safety panels of Mild Steel and stacking properly at Baltal and Neelgrath. |
| 2 | Dismantling of M.S Jacks to 148 No. Rooms from Neelgrath to Domel and stacking at designated site & Fixing of M.S. Jacks to 148 No. Rooms from Neelgrath to Domel including greasing of jack, and fixing in position with wooden joist on Bottom And Top post Yatra.(Complete Job) |
| 3 | Fixing of safety panels/CGI sheet paneling including supply of self driven screws, nails etc after conclusion of Yatra 2023. (Complete job) |
| 4 | Engagement of labour & Hire charges of Genset, welding set including cost of electrodes and POL for repairs/strengthening of Departure Lounge with available material at Neelgrath, Baltal camp including stores, cleaning of departure lounge and shifting f materials to SASB store, clearance of chocked floor traps and drains at departure lounge washrooms & Closure of camp area i.e Main Gate, Stores, Huts at Baltal and other openings by way of welding of M.S plates / CGI sheet etc completeafter conclusion of Yatra 2023. |
| 5 | Welding set , Genset , electrodes and POL |
| 6 | Blacksmith 2nd class |
| 7 | Helper |
| 8 | Assistant Fitter |
| 9 | Fixing of G.I chain link fencing of required mesh size 50mmx50mm including strutting with nuts,bolts and washels as required complete including repairs to damaged chain link fencing and angle iron postsby way of welding etcincluding dismantling after conclusion of Yatra. Labour only. |
| 10 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering.All work upto plinth level with 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) For CC strip at back of rooms to block rain water from entering and repairs to bases (8 Nos) |
| 11 | Carriage of cement by Mechanical Transport from Ganderbal to Neelgrath for an avg. lead 60 km |
| 12 | Carriage of sand & bajri by MTfor an average lead of 10 Km. |
| 13 | Provision for electrification in 6 no Temporary CGI panels sheds and renovation of defunct electrical points in Departure Lounge and SASB Huts (Quantities subject to actual measurement at site). (approved brand and make) |
| 14 | a) Wire 1.5 mm² - 1 Coils of 90 m each |
| 15 | b) 2 Way Gangue Box |
| 16 | c) Switch 6 Amp |
| 17 | d) 5 Pin 6 Amp Socket |
| 18 | e) Bulb Holder |
| 19 | f) 9 Watt LED |
| 20 | Providing and fixing of stones of sizes 150mmx150mmx200mm along the paths along with supply of lime and whitewashing of stones including excavation and making good the soil. |
| 21 | Finishing helipad with Acrylic smooth exterior paint of required shade: Old work (two or more coats applied @ 1.67liters/10sqm on existing cement paint surface) |
| 22 | Painting on steel pipe with synthetic enamel paint of approved brand andmanufacture of required colour to give an even shade on old work (one or more coats |
| 23 | Providing empty cement bags and filling with sand/ earth; including cost of sewing and Strings; excluding cost of bags and earth / sand. |
| 24 | Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore |
| 25 | Providing and fixing of PVC sanitary fitting of required colour and make to replace damaged fittings (subject to actual measurements at site) |
| 26 | PVC angle valve |
| 27 | PVC Bib Cock |
| 28 | PVC Pillar cock |
| 29 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete. |
| 30 | Providing and fixing exhaust fan 450 mm heavy duty of approved brand and make including required connections to the departure lounge. |
