Military Engineer Services-MES has published Tender For Additional/Alternator Repairs To Bldg No. P-125 And P-126 ( Or Md Accommodation ) Of 250 Coy Asc ( Sup ) Type G At Dbn Vihar Under Ge ( East ) Jalandhar Cantt. Submission Date for this Tender is 11-04-2024. Building Work Tenders in jalandhar Punjab. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 04-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-04-2024 |
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete of any description and in any position (as in sunken portion also) and removing surplus spoil out of defence landwhere directed at a level not exc 1.5 m above the starting point all as specified and directed |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified |
| 3 | Material and labour for 50mm PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement complete all as specified |
| 4 | Material and labour for cement concrete type E-2 1:5:10 (using 40mm graded brick aggregate) as in sunken flooring/sub base foundation complete all as specified and directed |
| 5 | Material and labour for cleaning of cracks & filling of cracks with SIKA latex SBR 100 putty/ Dr fixit 302 SBR latex/ Perma latex SBR/ FORSROC Nitabond SBR latex/ Asian Paints latex as required. Apply one coat of Acrylic modified cementitious coating of SIKA top Seal-107/Brush Bond FOSROC/ Dr Fixit/ STP/ CICO as per manufacturers instructions. Apply glass fabric sheet of SIKA fab 1/ FOROC/ Dr Fixit/ STP while the first coat is wet. Providing and applying a protection screed of 50mm thick in CM (1:4) mixed with Sika platocretere over the applied water proofing coating on horizontal surface. All the corners and joints should be pretreated with elastic waterproofing sealing tape with woven bonding mesh on each surface and an elastic expansions zone in the centre of make Sika Seal Tape S/ FOSROC/ Dr Fixit/ STP. Note : Waterproofing treatment has to be carried out through applicators authorised by the respective manufacturers and approved by GE |
| 6 | Material and labour for 15mm thick cement screed in CM (1:3) admixed with integral water proofing compound on wall and sunken floor including PCC (1:1.5:3) (using 12.5mm thick graded aggregate) in fillet at corners shall be provided complete all as specified and directed |
| 7 | Material and labour for non skid ceramic coloured tiles ofarea of eachtile exceeding 0.11 sqm but not exceeding 0.18 sqm and 6-7 mm thick in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 8 | All as per Srl item No 7.00 here-in-before but on vertical surfaces such asriser, skirting, dado,etc over and incl 10mm thick cement plaster in CM 1:4 rough finisher surface to receive tiles |
| 9 | Material and labour for 20 to 25mm thick machine in cut kota stone slab in single piecesize in treader & landings of stair cases including rounding to edge, over including brushing neat cement slurry with 3 kg/sqm with pigments to match the shade of slab including cutting, rubbing and mirror/granite finish polished complete all as specified and directed |
| 10 | All as per Srl item No 9.00 here-in-before but on vertical surfaces such asriser, skirting, dado,etc over and including 10mm thick cement plaster in CM 1:4 rough finisher surface to receive tiles |
| 11 | Material and labour for non skidceramic colouredtiles 7 to 8 mm thick area of tiles exc 0.6 sqm but n.exc 0.11 sqm of each tiles in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with & including screed bed or beading layer of mortar 15mm thick in cement mortar (1:6)for laying floor finishes, complete all as specified and directed |
| 12 | Material and labour for coloured glazed tiles of size 450x300x7mm thick as in vertical surface i.e. skirting/dado set and jointing in neat cement slurry and pointedin white or coloured cement to match the existing surface with & including rendering 10mm thick in cement mortar 1:4 finished rough to fix tiles, complete all as specified and directed |
| 13 | Demolition and dismantling of reinforced cement concrete of any description and in position not otherwise specifically provided complete all as specified and directed |
| 14 | Material and labour for MS TMT bars 10mm dia and over dia and cut to length, bent to shape required incl cranking bending spirally for hooping for column hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed |
| 15 | Material and labour for reinforcement cement concrete 1:2:4 type B-0 (12.5mm graded aggregate) as inslabsupported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified |
| 16 | Material and labour for 15/16 mm thick machine cut green Udaipur stone jointed with neat cement slurry mixed with pigment to match the colour of stone including cutting and polishing and making hole in stone and RCC shelves suitable for gas pipe, with round edges where required and including 15 mm screed bed with cement mortar 1:6 all as specified and directed by Engineer-in-Charge |
| 17 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing surplus spoil out of Defence Landwhere directed at a level not exc 1.5 m above the starting point all as specified |
| 18 | Material and labour for 15mm thick cement plaster in cement mortar 1:6 on internal surface of brick or concrete surface finished even and smooth withoutusing extra cement complete all as specified |
| 19 | Material and labour for 15mm thick cement plaster in cement mortar 1:4 on external surface brick or concrete surface finished even and smooth withoutusing extra cementall as specified |
| 20 | Material and labour for 5mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified |
| 21 | Supply only integral water proofing compound complete all as specified and directed |
| 22 | Material and labour for precast ferro cement shelves 25mm thick fixed over angle iron 25x25x5mm frame fixed to walland necessary groves cutting to wall and making good by cement plaster (1:1) to match the surfaces, including necessary form work and reinforcement etc complete work for shelves, platform, cub board shelves etc all as specified and directed |
| 23 | Supply and fixing in repair squatting pan WC orissa pattern size 580 x 440 mm white with integral floor rest with P or S trap including provn of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc and make good to floor complete all as specified |
| 24 | Supply and fixing in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern) including seat cover and flushing pipe for pedestal pipe etc complete all as specified and directed |
| 25 | Supply and fixing chromium plated brass JET including PVC pipe connection fixed to EWCall as specified and directed. |
| 26 | Dismantling and breaking up drain pipe CI/AC/PVC salt glazed ware or reinforcement concrete pipe in event not exceed 150mm dia including all fitting complete all as specified and directed |
| 27 | Supply and fixing for 110 mm PVC (SWR)Rain water pipessingle socketedin any length with rubber ring joints fixed towalls complete all as specified and directed. |
| 28 | All as per item Srl item No 27.00 but 75 mm dia |
| 29 | Supply and fixing PVC (SWR) bends 110 mm with access door complete all as specified and directed. |
| 30 | All as per Srl item No 29.00 but 75 mm with access door |
| 31 | Supply and fixing for 110mm PVC (SWR) vent cowl complete all as specified and directed. |
| 32 | Material and labour for PVC floor trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed |
| 33 | Supply and fixing 150 mm dia Cast iron gully traps setting and jointing with lead joint all as specified and directed |
| 34 | Supply and fixing CP grating 125mm dia complete all as specified and directed. |
| 35 | Taking up of or down steel tubing and connections 15mm bore complete all as specified and directed . |
| 36 | All as per Srl item No 35.00 here-in-before but 20mm bore |
| 37 | Supply and fixing steel water tubing15mm bore, medium grade with & including all fittings fixed to wall, ceilings andor laid in floors etc complete all as specified |
| 38 | Supply and fixing steel water tubing20mm bore, medium grade with & including all fittings fixed to wall, ceilings andor laid in floors etc including taking down the existing tubing complete all as specified |
| 39 | Supply and fixing PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve float and handle, 10 ltr capacity including brackets fixed in repairs complete all as specified and directed |
| 40 | Supply and fixing Vitreous china wash hand basin , white, flat back 550x400mm including one number brass CP waste coupling ,32mm dia , PVC waste pipe with connector, brackets 2 Nos including cutting for and pinning in ends of bracketscomplete all as specified |
| 41 | Supply and fixing Pillar tap ,brass with capston head , fancy type chromium plated , screwed down high pressure with or without lettered "Hot" or cold with long screwed for 15mm bore iron pipe and fixed complete all as specified & directed |
| 42 | Supply and fixing PVC connection, reinforced 45cm long 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed |
| 43 | Supply and fixing 15mm stop valves, fancy type chromium plated with long shank and cup (concealed type) screwed down, high pressure with crutch or butter fly handlescrewed at two right angles endsfor both iron pipe or for unions complete all as specified and directed |
| 44 | Supply and fixing 15mm Angle/stop valves, fancy type chromium plated with long shank and cup screwed down, high pressure with crutch or butter fly handle screwed at two right angles endsfor both iron pipe or for unionsand fixed in repairs complete all as specified and directed |
| 45 | Supply and fixing sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and waste coupling and waste pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 x 160 mm including bedding in CM on dwarf wall or including fitting cantilever brackets and connection union topipe complete all as specified and directed |
| 46 | Supply and fixing Bib tap cast copper alloy, chromium plated suitable for 15mm bore iron pipe with long body fancy type fixed in repairs complete all as specified and directed |
| 47 | Supply and fixing brass chromium plated shower rose of 125mm size, with or without swivel joints includingfixing to steel pipeor union in repairs complete all as specified and directed |
| 48 | Supply and fixing brass chromium plated tubular towel rail 20mm dia, D type 60cm long between CP flanges complete all as specified |
| 49 | Supply and fixing for Stainless steel plate rack of superior quality size 33" x 36" x10" and not less than 8 kg all as specified and directed |
| 50 | Supply and fixing Acrylic corner set of 3 piecesas per sample approved by Engineer -in-Charge all as specified and directed |
| 51 | Supply and fixing in repairs 600mmx450mm bevelled edge mirror of selectedquality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 52 | Supply and fixing in repair acrylic WHB Shelf600mm long and 125mm wideas per sample approved by Engineer-in-Charge complete all as specified and directed |
| 53 | Material and labour in repair mild steel pipe 25 mm dia curtain road with PVC coating fixed in the MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified |
| 54 | Supply and fixing 20mm dia curtain rails, mild steel, chromium plated fixing in cup board with brackets, stops, rollers etc, all as specified |
| 55 | Taking down chowkats or frame not exc. 1.5 sqm each with shutters (without taking off shutters from the fames) complete all as specified and directed |
| 56 | Taking down chowkats or frameexc. 1.5 sqm but not exc 4 sqm each with shutters (without taking off shutters from the fames) complete all as specified |
| 57 | Material and labour for MS work as in hold fast and similar small articles complete all as specified. |
| 58 | Material and labour for pressed steel frame of size 125x60mm for doors with one or more rebates including necessary fixinglugs, hinges, lock strike plate etc complete all as specified and directed |
| 59 | Material and labour for pressed steel frame of size 105x60mm for doors with one or more rebates including necessary fixinglugs, hinges, lock strike plate etc complete all as specified and directed |
| 60 | Supply and fixing structural steel framed work as in doors frame or gates of angleor other section with gusset plates, rails, braces etc. Cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering.Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing complete all as specified and directed. |
| 61 | Supply and fixing 2nd class hard wood35mm thickness of factory made plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed |
| 62 | Supply and fixing 2nd class hard wood 35mm thickglazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR part-I, sector 8, clause 8.20(a) complete all as specified and directed |
| 63 | Supply and fixing butt hinges medium weight, cold rolled mild steel 100mm size complete all as specified and directed |
| 64 | Supply and fixing 300mm long mild steel sliding door bolts stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified |
| 65 | Supply and fixing Mild steel pressed handles oval type stove enamelled black 150mm size complete all as specified and directed |
| 66 | Supply and fixing Mild steel barrel tower bolts, 200mm long, stove enamelled black, with bright bolt complete all as specified and directed |
| 67 | Supply and fixing aluminium floor door stopper 63 mm with two rubber legged all as specified and directed |
| 68 | Supply and fixing magic eye brass best quality fixed inmain door shutter approved by Engineer in charge complete all as specified and directed |
| 69 | Supply and fixing ordinary rat tail rod 300mm mild steel helical door spring with roller and plate complete all as specified and directed |
| 70 | Supply and fixing PVC solid door frame of size 50mm x 47mm made out of 5 mm plain/colour PVC sheet to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II |
| 71 | Supply and fixing factory made solid panel PVC Door30mm thick (style) consisting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C" channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour 10mm thick PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour 10mm thick PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing. |
| 72 | Supply and fixing 30mm thick factory made PVC Flush Cup board shutter consisting of panel of hollow section thickness. Consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles. top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hallow profile section at an equal distance from top and bottom of door and fixed with hallow profile section using 5mm thick PVC sheet using screws Hollow PVC profile shall be lipped with 10mm (5mmx 2) thick x 20mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. complete all as specified as per direction of Engineer-in-Charge |
| 73 | Supply and fixing butt hinges medium weight,stainless steel, bright polished 100mm size for fixing PVC Door Shutter complete all as specified and directed |
| 74 | Supply and fixing150mm aluminium anodised barrel tower bolt, of extruded section and fixed complete all as specified |
| 75 | Supply and fixing 100mm aluminium alloy handles, cast type, anodisedcomplete all as specified |
| 76 | Supply and fixing hasp & staple aluminium 100mm, including bolt to hinge plate and fixed with screws with Cup Board shutter, all as specified |
| 77 | Supply and fixing steel windows 1.25mm thick Box type (primer coated) ERW hollow "P" section of size 60mm x 25mm single rebated comprises of glazedshutter EWR sec 50 mm x 20mm and 1 mm thick and two openable leaf consisting two Nos sash bar of "T" section 20mm x 3mm complete welded to frame with one vertical mullion of EWR bot "T" section of size 60mm x 25mm and 1.25 mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nosfor each window including following fittings welded to failed shutter:- (a) Holdfasts 150 mm long 12mm x 3 mm made to shape- 4 Nos per window (b) Handle of Z sec 20 mm x 25 mm, 100 mm long - 1 No per leaf. (c) MS tower bolt 150 mm long - 2 Nos per leaf. (d) "Z" sec 20 mm x 25 mm , 100 long stopper-01 No per leaf, (e) Cleat 55mm long of hollow square 15 mm x 20 mm x 63 mm welded to hinges - 1 No per leaf (f) MS pintal hinges of size 75 mm x 12 mm - 2Nos per leaf. (g) Fabrication and fixing arrangement complete. Note:- Grill / guard war , glass paneshall be measured and Paid separately. |
| 78 | All as per Srl No. 77.00 here-in-before but in gauged shutters without sash bars all as specified and directed |
| 79 | All as per Srl item No. 77.00above but in ventilators fixed type |
| 80 | Supply and fixing framed work such as grills, gratings, etc .with ends of bars shouldered and/ or riveted , or forget into spikes; framed guard bars parallel iron doors and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed |
| 81 | Supply and fixing galvanized mild steel wire cloth 0.56mm nominal dia and average width of aperture 1.18mm and fixed with tinned tacks complete all as specified and directed |
| 82 | Supply and fixing in repair galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed |
| 83 | Material and labour for hacking out old broken glass (any thickness, size quality or description) from wooden or steel frame glazed with putty or fixed with beads complete all as specified and directed |
| 84 | Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty wooden beads in square not exc 0.50 Sqm each pane complete all as specified and directed |
| 85 | Material and labour for 3mm thick plain figure glass, pin headed type and fixing and glazing with in oil putty in sqaure n exc .5 sqm in each pane complete all as specified and directed |
| 86 | Supply and fixing 500 ltr rotational moulded polythylene water storage tank (Cylindrical vertical with closedtop) hosted and fixed in position including dismantling of existing tank of any description complete all as specified. ISI marked |
| 87 | Supply and fixing 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod& high density plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms.) complete all as specified and directed |
| 88 | Supply and fixing 20mm stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both endsforiron pipe or for unionsand fixed in repairs complete all as specified and directed |
| 89 | Material and labourfor repairing of RCC projections, chajjas , roofs, facia etc. by necessary preparation i.e. scrapping, cutting, chiselling, degusting and cleaning exposed reinforcement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregate and reinforced withwelded mesh of weightexc 2kg per sqmbut n.exc 3kg/sqm with or without facia and finished with cement sand mortar (1:3) using coarse sand in patches are n.exc 70mm including applying two coats of finishes to match with the existing surfaces in at any height complete all as specified. Note:- Cost of formwork and welded mesh shall be deemed to be included in unit rate quoted by the contractor. |
| 90 | Dismantlingof brick tiles single layer as in roofcovering complete all as specified |
| 91 | Demolition of mud in roofs any thickness includingplastering and leeping (whether full thickness removed or only a part thereof) all as specified |
| 92 | Material and labour for PCC (1:2:4) typeB-0 (using 12.5 mm graded stone aggregate) as in benching, roof padding,roof kerbs or mud stops, coping etc rounded or chamfered on edges. complete all as specified and directed |
| 93 | Material and labour for 10mm thick cement plaster in cement mortar (1:3) on concrete roof surfaces finished even and fair, including cleaning theroof top by water etc all as specifiedand directed by Engineer-in-Charge |
| 94 | Material and labour for paintingtheroof surface with a coatof hot blownpaving industrial bitumen 85/25as a bonding material in two coats one on primed surface & 2nd on APP based polymeric membrane at the rate of 1.20 kg/sqmcomplete all as specified and directed |
| 95 | Material and labour for APP based polymeric membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with five layer polyster non wove fabric (wt. Not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified |
| 96 | Material and labour for 40 mm thick brick tiles with 15 mm thick beddedlayer of 1:6 CM laid on 2nd bitumen coated surface and joints grouted flush mortar 1:3 mixed with 5% of crude oil by weight of cement, complete all as specified . |
| 97 | All as per Srl item No 96.00 here-in-before but except tiles |
| 98 | Material and labour for cutting out cracks to V-section in existing RCC roof slabs or terracing, cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight)complete all as specified and directed |
| 99 | Material and labour for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof and wall surfaces complete all as specified and directed |
| 100 | Material and labour for raking out joints/ pointing to masonary or brick work in single detached joints for flushing complete all as specified and directed |
| 101 | Material and labour forpreparing new plastered or unplastered wall surfaces and appliedtwo coat of cement base paintover one priming coat complete all as specified and directed by Engineer-in-Charge |
| 102 | Material and labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and appliedtwo coat of cement base paintcomplete all as specified and directed by Engineer-in-Charge |
| 103 | Material and labour for preparing new surfaces plastered or unplastered surfaces of walls by applying two coats of oil bound distemperover a coat of birla white puttycomplete all as specified. |
| 104 | Material and labour for three coats of white wash on newly plastered surfaces ofwallincludingpreparation of wall surfaces all as specified |
| 105 | Material and labour for three coats of white wash on newly plastered surfaces ofceiling includingpreparation of ceilingsurfaces complete all as specified and directed by Engineer-in-Charge |
| 106 | Material and labour for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc. (Plastered or un plastered surfaces) and applying two coat of white (lime) wash on ceiling complete all as specified and directed by Engineer-in-Charge |
| 107 | Material and labour for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and stooping of distempered and painted surfaces and applying two coat of oil bound distemper overa coat of birla white putty complete all as specified and directed by Engineer-in-Charge |
| 108 | Material and labour for preparation of old surfaces of wall including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or un plastered surfaces) and applying two coat of white (lime) wash on wall complete all as specified and directed by Engineer-in-Charge |
| 109 | Material and labour for preparation of newwood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engineer-in-Charge |
| 110 | Material and labour for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applied two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engineer-in-Charge |
| 111 | Material and labour for preparation of oldwood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applied one coat of synthetic enamel paintcomplete all as specified and directed |
| 112 | Material and labour for preparation of old steel surfaces of any description, not otherwise described over 10cm width or girth and applied one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge |
| 113 | Supply and fixing in repair 18mm thick factory made PVC celuka ply for kitchen cupboard as in partition, shelves, wall, drawer, shutter, etc of required colour and size consisting of panels .The visible edge of celuka ply to be lipped by 18mm width X 2mm thick PVC cladding sheet of required colour and fixed with adhesive etc complete as per manufacturer instruction and directed |
| 114 | Supply and fixing stainless steel self closing hinge of 75 mm size for PVC door shutter complete as specified and directed. |
| 115 | Supply and fixing 50 X 15 mm size magnet door catcher for closing for PVC door shutter complete as specified and directed. |
| 116 | Supply and fixing 100 mm size MS mat / glossy finish handle complete as specified and directed |
| 117 | Supply and fixing stainless steel soap dish any type fixed to plugs with chromium plated brass screw complete all as specified and directed |
| 118 | Demolition of brick work built in cement mortar including all quoins, arches pillars etc but excluding precast concrete articles all as specified |
| 119 | Material and labour for brick work with sub class "B" old size bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified |
| 120 | Supply and fixing 60 mm thick precast cement concrete M-35 machine pressed inter locking tiles with grey cement and pigments(SI 15658:2006) all as specified |
| 121 | Material and labour for cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub basecomplete all as specified and directed |
| 122 | Material and labour for sand cushioning with layer of fine sand 25mm thick over PCC for laying of interlocking paver block complete all as specified and directed |
| 123 | Taking down carefully existing point wiring of any type/ any size (i.e. on wooden/ batten, surface conduit, casing capping or concealed conduit) complete for light, fan, socket or power point etc includingremoving switches, sockets, holders, ceiling rose, pendants, regulators, light fittings, switch board outlets with sheets and other materials from site for re-fixing of serviceable light, accessories for taking credit of unserviceable light and accessories as per Sch of creditand making good disturbed surface of walls, roof, floors etc. with any type of civil work involved complete all as specified and directed |
| 124 | Material and labour for point wiring for light/ ceiling fan/ exhaust fan point with 1.5 Sqmm (nominal area) FRLS PVCinsulated unsheathedmulti stranded copper conductor of size 1.5 Sqmm cabledrawn in and including concealed rigid PVC conduit medium grade not less than 20mm dia with accessories including cutting chases for laying of conduit /fixing of boxes in walls/floor etc including making good to disturbed surfaces as per adjoining specification and terminated in and including sunken pressed steel boxes duly painted with anti-corrosive paint over a coat of red oxide primer with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with cupwashers etc including FRLS PVC insulated unsheathed multi stranded copper conductor 1.5 Sqmm single core as earth continuity conductor (green colour) connected with earth dolly with thimble complete all as specified and as directed by Engineer-in-Charge |
| 125 | All as per srl item No. 124.00 here-in-before but for one socket outlet 5 Amps on independent board complete all as specified. |
| 126 | All as per srl item No. 124.00 here-in-before but for one socket outlet 5 Amps on the sameboard controlled complete all as specified. |
| 127 | All as per srl item No. 124.00 here-in-before but for one bell point controlled by one bell push complete all as specified. |
| 128 | All as per srl item No. 124.00 here-in-before but for one light point controlled by two way switches complete all as specified. |
| 129 | All as per srl item No. 124.00 here-in-before but with 2.5 Sqmm(nominal area) FRLS copper cable for one 3 Pin 15 Amp socket on independent board including one 2.5 Sqmm copper conductor multi stranded green colour PVC insulated unsheathedFRLS cable 1100 volts grade as earth wire connected to common earth dolly with all accessories complete all as specified and directed by Engineer-in-Charge. |
| 130 | Supply and fixing in replacement switch piano flush type, 5 Amps, 240 Volt AC single pole, two way complete all as specified. |
| 131 | Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified. |
| 132 | Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified. |
| 133 | Supply and fixing socket out let 5 Amp, 5 pinflush type complete all as specified. |
| 134 | Supply and fixing Socket outlet multi purpose 2 in 1, 5/6 pin, 5 & 15 Amps, flush type complete all as specified. |
| 135 | Supply and fixingin repairDecorative wall mounting light fitting suitable for 09 watt LED lampcomplete with glassshade /polycarbonate cover including 1 x 09watt LED lamp complete all as specified and directed by Engineer-in-Charge. |
| 136 | Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified. |
| 137 | Material and labour in replacement Bell electric AC (Ding Dong) 240 volt SP complete all as specified. |
| 138 | Supply and fixing in replacement bell push switch flush type 5 Amps, SP, 240 volts complete all as specified and directed. |
| 139 | Material and labour Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittingsall as specified and directed. |
| 140 | Supply and fixingfive step fan regulator, electronic type, single phase,including connection complete all as specified. |
| 141 | Material and labour forsub main wiring with two run of single core FRLS PVC insulated unsheathed multistranded copper conductor cable of 6.0 Sqmm drawn through in and includingnew PVC rigid non-metallic concealed conduit(medium grade) with all fittings including earth continuitysingle wire FRLS PVC insulated unsheathed multistranded copper conductor cable 6.0 Sqmm ( green insulation) with any type of civil work including making good to disturbed surfaces to match existing surface complete all as specified. Note : Two run of 6.0 Sqmm wire and one run of 6.0 Sqmm wireas earth wire includingPVC conduit shall be measured as one unit |
| 142 | Material and labour in replacement for sheet metal DB for MCBs, SPN, 8 ways 240 v, double door, single phase, with copper bus bar, neutral bar/ connectors/ earth link suitable copper thimbles, lugs etc complete all as specified. Make: EKINOX3 series of Legrand/ Acti 9 metalic series of Schneider/ Optipro of Indoasian/ Osafe of HPL/ Metallica of Havells or equivalent in ABB/ Siemens/ Hager. |
| 143 | Supply and fixing MCB SP 6 to 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engineer-in-Charge |
| 144 | Supply and fixing MCB SPN 32 Amps 240 V, 10 KA, B curve as per Osafe series of HPL/ Acti 9 series of Schneider/ Optipro of Indoasian or equivalent in Havells/ Legrend/ ABB/ Siemens/ Hager. complete all as specified and directed by Engineer-in-Charge |
| 145 | Supply and fixing LED lights fitting 1x 20 Watt, 220V AC decorative box type frame with holder including LED tube rod 20 watt connecting up single/ double connections with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 146 | Supply and fixing LED light fitting mirror type with high output diffuser 9/10 watt 220 V AC decorative type including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed |
| 147 | Supply and fixing energy saving & environmental friendly long life versatile pressure die-cast aluminium housing luminaire with heat resistant glass and suitable optics for uniform distribution of light 35 watt LED bldg security lights with high efficiency electronic driver BIS approved, having IP-66 protection,surge protection operative on AC supply 140 volts to 270 volts pre-wired complete with GI pipe of 25mm bore of suitable length and MS clamp duly painted with two coat aluminium oxide paint all as specified and directed |
| 148 | Taking down carefully of ceilingfan of any sweep or make with dismantling blades allas specified and directed by Engineer-in Charge. |
| 149 | Material and labour for painting of ceilingfans complete with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc. complete all as specified and directed |
| 150 | Material and labour for hanging of ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed by Engineer-in-Charge |
| 151 | Supply and fixing powder coated sheet metal enclosure indoor type ( size suitable for having 8 Nos meter compartments, bus bar chamber, cable connection chamber) made out of 2mm thick CRCA sheet having independent compartments 08 Nos of size 300 x 400 mm for single phase energy meters and MCB’s provided with front hinged shutters with locking arrangements and clear glass to visualize the meter reading without opening the compartment with sufficient working space in compartment; duly prewired with single core PVC insulated and sheathed FRLS stranded copper conductor wire of suitable size from bus bar to meter compartment 08 Nos duly crimped with copper thimbles, duly powder coated having one number cable gland for suitable size of LT XLPE/ PVC cable entry at bottomcomplete all as specified and directed and consisting with the following:- (a) Bus bar for 3 phase 4 wire system of 4 x 100 Amps rated insulated copper strip mounted on resin cast insulators in independent compartment having front open able shutter - One Set. (b) MCCB, four pole, 415 volts, 63Amps, 16 KA with, ICS=ICU=100% including spreader links on both sides-One No. (c) MCB SPN, 25 Amps, 10 KA C-curve-08 Nos. Note:- Existing meters shall be dismantled & re-fixed in panel by contractor and make cable connection properly through LT cable joint with lugs of suitable size rates are deemed to include for the same. |
| 152 | Earthing completein replacementwith galvanised steel earth plate electrode 60cmx60cmx6.0mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level with the top edge of electrode not less than 1.5 metres below normal ground levelconnected to galvanised earth lead wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron and including GI lead protection pipe of GI light grade 15mm dia upto 7.5 mtrs and watering pipe 20mm bore of GI medium grade with funnel and wiremesh, earth plate covered on all sides with min 150mm thick alternate layers of charcoal, saltall as shown in electrical plate No 3 of SSR Part-I 2009 connected to earthingpoint with PCC chamber and RCC cover in 1:2:4 complete with any type of earth work involved all as specified and directed and testing on completion. Note:- PCC Chamber shall be constructed at least 0.50 mtr away from on the earth pit electrode and pipe for watering shall be provided in slanting manner |
| 153 | Material and labour for XLPE insulated, PVC sheathed galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with strandedaluminium conductor of size 16 sqmm 4 core complete laid in trenches passing through pipes/culverts/ under roads/ alon wall all as specified and directed by Engineer-in-Charge |
| 154 | Excavation in trenches not exc 1.5 meter wide and not exc. 1.5 mtr in depth for laying of under ground cable, pole foundation and stays etc and getting out in hard / dense soil all as specified and as directed |
| 155 | Returning and filling in, including spreading and levelling, water and well ramming in layers not exc. 25cm all as specified and directed |
| 156 | Removing excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed. |
| 157 | Supply and laying old size sub class "B" bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed by Engineer-in-Charge |
| 158 | Material and labour for sand cushioning with 8cm thick layer of sand before laying of cable and 15cm thick after laying of cable in trenches complete all as specified and as directed |
| 159 | Material and labour for GI tube light grade 50mm bore laid in trenches or fixed on wall/floor for protection of UG cable complete all as specified and directed. |
| 160 | Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, frame and louvers made of MS powder coated (1.2mm thick) sheet frame having aluminium flappers completeincluding making/ cutting of hole in wall of any thickness and making good to disturbed surface complete including plastering all as specified and directed |
| 161 | Supply and fixing exhaust fan, steel body AC single Phase. 230 V of size 225mm/ or next higher size available sweep with, blades, and frame and louvers completeincluding making/ cutting of hole in wall of any thickness and making good to disturbed surface complete including plastering all as specified and directed |
| 162 | Supply and fixing Single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one SP MCB 20 Amps including top Plug complete all as specified & directed by Engineer-in- Charge |
| 163 | Supply and fixing in repair energy saving bulk head light luminaire with opal diffuser LED 9 watt 6000 K, power factor more than 0.90, IP-65 class-I protection with high efficiency BIS marked LED electronic driver, surge protection 2 KV, operative on 140 volts to 270 volts AC supply complete prewired, connecting and testing complete all as specified and directed. |
| 164 | Fixing only serviceable tube light fittings any type and any description retrieved under item Srl No. 123.00, including necessary electric connection with round flexible wire with multi stranded copper conductor of size 0.50 Sqmm, 3 core, 1100 volts grade completeall as directed |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
