Military Engineer Services-MES has published Tender For Special Repair To Bldg No T-10 (Otm Accommodation) In 26/3/J Camp, Additional/Alternator To Conference Hall Near Bldg No P-105, Provision Of Horizontal Rope, Provision Of Guard Room Along With With Toilet And Bathroom In 26/2/J Camp At Yol Cant. Submission Date for this Tender is 08-04-2024. Building Work Tenders in Kangra Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 01-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 08-04-2024 |
| Sl. No. | Item Description |
| 1 | PART-I:- Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, all as specified. |
| 2 | Taking down and refixing in same opening of chowkats or frames including shutters not exc. 1.5 Sqm each and removing from site, all as specified. |
| 3 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, all as specified. |
| 4 | Dismantling plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roofcovering, all as specified. |
| 5 | Dismantling timber scantlings 40 sqcm and over in section, in any position, framed or unframed work, complete all as specified. |
| 6 | Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section framed or unframed, complete all as specified. |
| 7 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, all as specified. |
| 8 | Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed. |
| 9 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed. |
| 10 | Taking down cement plaster on brick or stone surfaces and tiles with bedding etc. including raking out joints, hacking for key, scrubbing down with water etc including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed. |
| 11 | Taking up or down 15mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified. |
| 12 | Taking up or down 20mm bore, steel tubing and connections, including cleaning for refixing or removal from site, all as specified. |
| 13 | Demolition of cement concrete (reinforced) of any description and any position not otherwise specifically provided for, including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed. |
| 14 | Dismantling boarding, any discription fixed in any postion with nails complete, all as specified and directed. |
| 15 | Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed. |
| 16 | Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed. |
| 17 | Aluminium anodized snap grid frame work of size605 mm x 605 mm as in false ceiling, flat or sloping (pattern as per manufacturer"s catalogue/instruction), cutting holes for electrical fittings fixed on an including aluminium tee of size 25 mm x25 mm x1.5 mm as main runner, aluminium tee of size 25mmx25mmx1.25mm as cross runner and aluminium angle of size 25mmx25mmx1.25mm at the perimeter suspended from soffit at approx 900mm centre to centre with hangers 6mm dia galvanized (length as per site requirement) adjusting level fixed to roof by means of ceiling cleats made out of galvanized iron flat 40mmx3mm size, 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including necessary scaffolding all as specified and directed. |
| 18 | 6mm thick non asbestos fiber cement building boards (Decorative E Board) as in ceiling fixed or laid/ inserted to timber/GI / aluminium framework fixed with nails, including preparation of surface and applying three coats of white wash, complete all as specified and directed. |
| 19 | Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radiusbuilt in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. |
| 20 | Brick work with old size fly ash bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. |
| 21 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. For roughly finished flat surfaces of concrete, complete all as specified and directed. |
| 22 | Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, for roughly finished flat surfaces of concrete, complete all as specified and directed. |
| 23 | Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), etc. For roughly finished flat surfaces of concrete, complete all as specified and directed. |
| 24 | Reinforced cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintel, over 1.50m span, complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid separately. |
| 25 | Reinforced cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid separately. |
| 26 | Reinforced cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. Note: Reinforcement and form work shall be measured and paid separately. |
| 27 | TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed. |
| 28 | TMT bars 5mm dia and over upto and including 10mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacers and binders, complete all as specified and directed. |
| 29 | Rendering cement plaster 15mm thick in cement mortar 1:4 (1 cement : 4 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on concrete surfaces, surface finished even and smooth without using extra cement, mixed with WPC, all as specified. Note : Supply only Water proofing compound shall be measured and paid for seperately. |
| 30 | Supply only liquid water proofing compound, complete all as specified. |
| 31 | Rendering cement plaster 15mm thick in cement mortar 1:6 (1 cement : 6 coarse sand) in two layers (10mm thick first layer and 5mm thick second layer) on fair faces of brick wall or on stone masonry surfaces, surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 32 | Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care cement putty of surface, complete all as specified and directed. |
| 33 | Complete removal of existing treatment of wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care cement putty of surface, complete all as specified and directed. |
| 34 | Two coats of cement base paint over a coat of white wash on newly plastered surface of walls including preparation of surface complete all as specified and directed. |
| 35 | Preparation of newly plastered wall surfaces and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Litre/ 10 sqm, complete all as specified and directed. |
| 36 | Preparation of old decorated plastered or unplastered external wall surfaces including cleaning by brooming downor with steel wire brushing scraping down smoke soot, moulded moss and efflorescent salts and cleaning oil and greasy spotsand applying one coat of cement base paint, complete all as specified and directed. |
| 37 | Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.410 Gde-E-250, steel work, complete all as specified and directed. |
| 38 | Rolled sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240s, steel work, complete all as specified and directed. |
| 39 | Mild steel screw bolts (purpose made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.50cm long, complete all as specified and directed. |
| 40 | Mild Steel framed work as Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete, conforming to Fe 410 Gde E-250, complete all as specified and directed. |
| 41 | Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in floors, levelling course, 25mm thick, surface finished even and fair to receive top surface, complete all as specified and directed. |
| 42 | Mat finish (non skid), Premium class Igrade, joint free, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc.0.18 sqm but not exceeding 0.38 sqm, in floors and the like, set and jointed in neat cement slurry and pointed incoloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. |
| 43 | Mat finish (non skid), Premium class Igrade, joint free, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm, in floors and the like, set and jointed in neat cement slurry and pointed incoloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified and directed. |
| 44 | Dismantling floor, hearth or wall tiling including cement mortar bedding (But not backing), removing and rubbish of the premisses, completeincluding removal of debris to a distance exc 1.5 km but n.exc 2 km, complete all as specified and directed. |
| 45 | Glazed coloured tiles of size 350x250/450x300x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand), complete all as specified and directed. |
| 46 | Machine cut kota stone slab flooring 18-20 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase, complete all as specified and directed. |
| 47 | Machine cut kota stone,18-20 mm thick, as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in vertical surfaces such as skirting/dado/riser to step/pillar aid over and including 10mm thick bedding layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. |
| 48 | Plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mmthick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), complete all as specified and directed. Note:- The unit rate include for use of form work (straight or curved). |
| 49 | Pressed steel frames of size 125x60x1.25mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed. |
| 50 | M&L for PCC 1:3:6 type C-1 with using 20mm graded stone aggregate as in bed block, bed plates etc. For embedding hold fasts, filling in door frame etc, complete all as specified and directed. |
| 51 | Mild steel work as in hold fast, bolt hooks (stay) hook and pintle hinges, bands, straps, hold fasts, clamps, wall ties, cleats, fanhooks etc. or similar small articles conforming to grade Fe-290 grade E-165, complete all as specified and directed. |
| 52 | 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides covered with decorative veneer with lipping/frame to match type, complete all as specified and directed. |
| 53 | Factory madesecond class hard wood (Sal) glazed and Skelton door shutters35mm thick open rebated and prepared to receive glass gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, complete all as specified and directed. |
| 54 | Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as specified and directed. |
| 55 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x35mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No"s for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 26/13. Make : As per Appendix "C".Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day. |
| 56 | Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, complete all as specified and directed. |
| 57 | Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads, complete all as specified and directed. |
| 58 | Sheet glass 4mm thick ordinary quality and glazingwith oil putty wooden beads in squares, not exc. 0.5sqm in each pane, complete all as specified and directed. |
| 59 | Figured glass, pin head type 4mm thick and glazingwith oil putty/ wooden beads in squares, not exc. 0.5sqm in each pane, complete all as specified and directed. |
| 60 | Applying two coats of synthetic enamel paint over a coat of red oxideonnew steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, complete all as specified and directed. |
| 61 | Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed. |
| 62 | Harrison 25mm bore Curtain rails, mild steel, chromium plated with fixing brackets, stops and roller etc. fixed in repair, complete all as specified and directed. |
| 63 | Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mmplain colourPVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No160 of MES SSR 2010 Part-II, complete all as specified and directed. |
| 64 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as specified and directed. |
| 65 | Factory made solid PVC Door/window/ventilator Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges shall be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 180 of MES SSR 2020 Part-II |
| 66 | Factory made solid panel PVC window/ventilator shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as specified and directed. |
| 67 | Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm, fixed, complete all as specified. |
| 68 | Small fittings of 2nd class hard wood (SAL) such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including 50mm long, medium weight, cold rolled mild steel butt hinge, articles not exc. 200 cu.cm. each including preparation of articles and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 69 | Butt hinges, medium weight (ISI marked), cold rolled, stainless steel 100mm long, complete all as specified and directed. |
| 70 | Butt hinges, medium weight (ISI marked), cold rolled, stainless steel 75mm long, complete all as specified and directed. |
| 71 | Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 200mm, fixed, complete all as specified and directed. |
| 72 | Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 150mm, fixed, complete all as specified and directed. |
| 73 | Extruded aluminium handles (ISI marked), cast type, anodised, of size 150mm, complete all as specified and directed. |
| 74 | Extruded aluminium handles (ISI marked), cast type, anodised, of size 125mm, complete all as specified and directed. |
| 75 | Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 250mm with lipping frame to match, complete all as specified and directed. |
| 76 | Hardwood 2nd class 15mm thick boarding, supplied & fixed with nails in any situation (except flooring and skirting) Planed one side with butt joints, complete all as specified and directed. |
| 77 | Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed. |
| 78 | Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed. |
| 79 | Chromium platedbrass shower rose, type, 125mm size suitable for 15mm bore pipe with swivel joint fixed to pipe, fixed in repair, complete all as specified. |
| 80 | 100mm size steel locking bolts with mild steel electrogalvanised plate and bright bolt not less than 10mm dia, complete all as specified and directed. |
| 81 | Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe, fixed in repair, complete all as specified and directed. |
| 82 | Jet for pedestral pan, chromium plated of standard size, complete all as specified and as directed by Engr-In-Charge. |
| 83 | Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long and 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, fixedcomplete, all as specified and directed. |
| 84 | Vitreous China bowl Urinal, flat back 465x355x265mm, white minimum with grating and union for discharge pipe, complete including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe, including 32mm bore PVC waste pipe and fixed in repair, complete all as specified. |
| 85 | Wash basins, Vitreous China (Flat back type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with PTMT coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia and fixed in repair, complete all as specified and directed. |
| 86 | Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered "Hot" or "Cold" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15 mm bore and fixed in repair, complete all as specified and directed. |
| 87 | Brass Chromium Plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges, with brass brackets, fixed with chromium plated brass screws, fixed in repair, complete all as specified and directed. |
| 88 | 600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed in repair, complete all as specified and directed. |
| 89 | Soap dish, vitreous China white, approximate size 160x160x90mm, chromium plated, fixed to plugs with chromium plated, brass screws fixed in repair, complete all as specified and directed. |
| 90 | Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, fixed with chromium plated brass screws, complete all as specified. |
| 91 | Stop valve, cast copper alloy, fancy, type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified and directed. |
| 92 | Angle valve, cast copper alloy, fancy chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair, complete, all as specified and directed. |
| 93 | Bib taps, 15mm bore, cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed in repair, complete, all as specified and directed. |
| 94 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 110mm including fixing adjustable clamps complete, complete, including taking up or down old pipe, complete, all as specified and directed. |
| 95 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors bore 110mm complete, complete, including taking up or down old pipe, complete, all as specified and directed. |
| 96 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 75mm including fixing adjustable clamps complete, complete, including taking up or down old pipe, complete, all as specified and directed. |
| 97 | PVC (SWR) bends any radius, 110mm bore jointed with solvent cement and (fitted with oval access door, complete, all as specified and directed. |
| 98 | PVC (SWR) bends any radius, 75mm bore jointed with solvent cement and fitted with oval access door, complete, all as specified and directed. |
| 99 | PVC (SWR) junction single, (Single T) equal or unequal, 110mm bore, provided with oval access door, complete, all as specified and directed. |
| 100 | PVC (SWR) junction single, (Single T) equal or unequal, 75mm bore, provided with oval access door, complete, all as specified and directed. |
| 101 | PVC (SWR) vent cowl 110mm, complete, all as specified and directed. |
| 102 | PVC (SWR) ‘P’ or ‘S’ trap of 110mm dia, complete, all as specified and directed. |
| 103 | PVC connection 15mm size with PTMT nuts at boths end 450mm long and fixed, complete, all as specified and directed. |
| 104 | CP grating 125mm and fixed in repair, complete, all as specified and directed. |
| 105 | Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washerscomplete and making connections with existing water supply line including dismantling old cemented/ asbestos water/ PVC storage tank, complete, all as specified and directed. |
| 106 | 20mm bore Ball brass valves, high pressure of epoxy coated aluminium rod, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, fixed repair, complete all as specified and directed. |
| 107 | Surface excavationnot exceeding 30cms deep and averaging 15cms deep and getting out in any type of soil, complete all as specified and directed. |
| 108 | Removing excavated material not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and directed. |
| 109 | 75mm thick Plain cement concrete M-7.5 nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in sub base to floor, surfaces finished even and fair, complete all as specified and directed. |
| 110 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 111 | Chequered cement concrete tiles machine pressed of size 25cmx25cmx 20mm thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 112 | Plain cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as in lintels upto 1.5 metre clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, chamfered angles and throating, complete all as specified and directed. Note :- (i) The unit rate include for use of form work (straight or curved). (ii) Reinforcement if any shall be measured and paid separately. |
| 113 | Plain cement concrete M-10 nominal mix, type C-1 using 20mm graded mechanically crushed stone aggregate as in surface channel and drains including necessary form work, complete all as specified and directed. |
| 114 | Extrafor forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped etc., complete all as specified and directed. |
| 115 | Cleaning/desilting of the drains by removing foreign materials / silt/ greasy materials / earth from the drains, removing the excavated material from site to a distance n exc. 50 mtrs and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified and as directed by Engineer-in-Charge. |
| 116 | False ceiling in 2 to 3 layer at any height by fixing 12mm thick gypsum board sheets on frame work of GI sheet section, The main runner of 22 gauge GI sheet and cross runners of 24 gauge GI sheet must be framed to form a mesh of 50mmx50mm centre to centre. The gypsum board must be fixed to the GI frame and joint to be properly filled in with POP paste and paper tape to get a levelled smooth ceiling, Recessing of the gypsum board for light fixtures must be done along with extra frame work of GI sheet section to hold the concealed light fixtures etc. including cost of two or more coats to give an even shade of plastic paint to hold the concealed light fixture etc. including coat of two or more coats to give an even shade of plastic paint on ceiling with putty work complete with designer ceiling (with part ply laminate and cove), complete all as specified and as directed by Engineer-in-Charge. |
| 117 | Supply, fitting and fixing of 8mm thick laminated wooden flooring with plank size not less than 1200mmx190mm (with unilin/tongue-groove locking arrangement) having 0.2mm thick top abrasive layer over a decorative layer followed by a high density fibe board having density > 850 Kg/cum, substrate core over a resin saturated packing layer and installing through unilin/tongue-groove system (having locking strength not less than 1000Kg/m) over a 2mm thick under layer polyurethene foam on polythene sheet 250 micron over a smooth/flat hard sub-floor free from moisture (less than 8%), grease etc complete in all respect requisite accessories like end profile tranisition profile, reducer tee profile etc wherever required and preparation of base including all other incidental works as per direction and satisfaction of Engr-In-Charge. |
| 118 | Wall panelling made of pinewood E1 grade fiber board of size (128mm with thickness of 16mm), melamine/teakwood veneer laminated finish, groove perforated L32-2 (2mm grooves @ 32mm centers), backlined with sound texblack acoustical flessce, tongue-groove edge for a seamless look, 5 test fire retardent grade/no FR, acoustic NRC 0.65-0.75 (For E300* mounting) size 128x2440x16mm volume density of base board-800-830 Kg/cum, 10-10.5 kg/sqm (L32), installed by using strut frame work system. slats to be packed with synthetic PF 10x25 adhered to wall with stick including all the support system of approved make list including removal of exisiting wall panelling, complete all as specified and as directed by Engineer-in-Charge. |
| 119 | PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, complete all as specified and directed. |
| 120 | Chromium plated(Health Faucet) (ABS Body) with 1 Meter Long PVC Tube & Wall Hook, complete all as specified and directed. Make:Cat Part No. ALD-IVY-583 of Jaquar or equivalent in makes mentioned in Appendix "C"). |
| 121 | Chromium plated Single Lever WHB center hole mixer with Popup Waste System, 450mm Long Braided Hosescomplete, all as specified. Make:- (Cat Part No SOL-6051B of "Jaquar" or equivalent in makes mentioned in Appendix "C"). |
| 122 | S&F toilet paper holder with flap recessed type (stainless steel) of vitreous china fixed to walls with chromium plated (CP) brass screws, fixed in repair, complete all as specified and as directed. Make:- Jaquar Cart Part No AHS-1553 or equivalent make in Appx "C". |
| 123 | 6mm thick mirror of any size including rounding and polishing of edges with necessary fittings, fixed in repair, complete all as specified and directed. |
| 124 | S&F one piece floor mounted toilet water closet of size (WxPxH) 360x675x750mm, white or tinted, S-trap 300mm, trendy square design, slim UF ezee close seat cover, wash down system, dual flush (6/32 ltrs) mechanism and fixed in repairs with necessary fixing bolts/screws etc., complete all as specified and directed. Make:- Jaquar cat Part No. OPS-WHT-15853S300UF, somany, cera or equivalent. |
| 125 | S&F Counter top vitreous china wash basin premium quality of size 610x385x130mm including brackets waste coupling and pipe of 32mm dia and fixed with including all connected items and fixed in repair, complete all as specified and directed. Make:- Jaquar, somany, cera or equivalent. |
| 126 | 25mm bore Ball brass valves, high pressure of epoxy coated aluminium rod, with polythene float and flynut complete, screwed for iron pipe or brass ferrule, fixed repair, complete all as specified and directed. |
| 127 | Gun metal, globe or gate valves, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 25mm bore iron pipe or for unions and fixed, complete all as specified and directed. |
| 128 | S&F 25mm dia mild steel powder coated, fancy type curtain rod, and fixed in repair, complete all as specified and directed. |
| 129 | Curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section, and fixed in repair, complete all as specified and directed. |
| 130 | S&F 9mm thick toughened glass shutters with printed formation sign (single leaf openable type) with diamond polished edge, clear glass including all hardware fittings detailed as under, fixed in position as per manufacturers instructions including following fittings complete. (a) Stainless steel top patch (cat No. EPF-701) 01 set. (b) Stainless steel top pivot (cat No. EPF-712) 01 set. (c) Stainless steel bottom patch (cat No. EPF-702) 01 set. (d) Glass to wall stainless steel lock (cat No. FH-ECO-842) 01 set. (f) Stainless steel handle 300mm size (cat No. ESBH-011) 02 Nos for each shutter. Note:- Cat No mention above for hardware fittings are of make ENOX, contractor may use similar type hardware fittings of make DORMA/OZONE make of glass ATUL/ MODI/ GURD/ SAINT GOBAIN/ JINDAL/ INDAL/ HINDAL/ WALCO. |
| 131 | S&F 12mm thick best quality fixed type toughened glass window with frame of approved make and size including all appropriate fittings/fixtures complete as approved by Engr-In-Charge. Make ENOX, contractor may use similar type hardware fittings of make DORMA/OZONE make of glass ATUL/ MODI/ GURD/ SAINT GOBAIN/ JINDAL/ INDAL/ HINDAL/ WALCO. |
| 132 | S&F 12mm thick best quality three track sliding type toughened glass window with frame of approved make and size including all appropriate fittings/fixtures complete as approved by Engr-In-Charge. Make ENOX, contractor may use similar type hardware fittings of make DORMA/OZONE make of glass ATUL/ MODI/ GURD/ SAINT GOBAIN/ JINDAL/ INDAL/ HINDAL/ WALCO. |
| 133 | M&L for PVC frame (single rebated) of size 60mmx30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws, complete all as specified and as shown on drawing. Note:- Door frame shall be water proof, termite proof, elegant and should have excellent screws holdings strength to fix hinges and hold doors properly for a long life. |
| 134 | S&F fully automatic urinal pot of size 29.50x32.50x57.50cm ceramic starwhite wall hung automatic urinal sensor AC/DC, complete all as specified and as directed by Engr-In-Charge.Make:- Jaquar or equivalent make in Appx "C". |
| 135 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in any type of soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, allas specified. |
| 136 | Plain cement concrete M-7.5 nominal mix, D-2, using 40mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, complete, all as specified. |
| 137 | Plain cement concrete M-15 nominal mix, B-1, using 20mm graded mechanically crushed stone aggregate as in foundation, filling and mass concrete, complete, all as specified. |
| 138 | Mild steel angle iron work inposts and struts in fencing including cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, duly painted with one shop coat of zinc chromate primer including preparation of surfaces all as specified. |
| 139 | S&F Army Manila rope for Horizontal /Monkey training rope of 40mm dia round shape of Golden Brown colour mafe of "Machine Spun"" thin even and fine yarns in order to smooth surface and better grib of rope, complete all as specified and as directed by Engr-In-Charge. |
| 140 | Excavation in trenches not exc 1.5 metres wide and n.exc 1.5 metres deep and getting out in any type of soil, complete all as specified and directed. |
| 141 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc. 25cm thick each layer of soil, complete all as specified and directed. |
| 142 | Reinforced cement concrete (design mix) M-25 (using 20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed. |
| 143 | Formwork to sides of pillars, posts, struts, piers, columns and stanchions, for roughly finished square, rectangular or polygonal surfaces of concrete, complete all as specified and directed. |
| 144 | Hard core of broken stone or boulders of gauge not exc. 63mm deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface, all as specified. |
| 145 | Rendering cement plaster 10mm thick in cement mortar 1:3 (1 cement : 3 coarse sand) on ceiling, surface finished even and smooth without using extra cement, all as specified. |
| 146 | Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over a coat of chalk whitening including preparation of surface complete, all as specified. |
| 147 | Machine cut kota stone slab flooring 20-25 mm thick of size not less than 550 mm X 550 mm as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in floor etc, laid over and including 15mm screed layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, laid over PCC subbase, complete all as specified and directed. |
| 148 | Machine cut kota stone, 20-25 mm thick, as per sample kept in GE’s office, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab, as in vertical surfaces such as skirting/dado/riser to step/pillar aid over and including 10mm thick bedding layer in cement mortar 1:4 (1 cement : 4 coarse sand), cutting, rubbing, grinding and polishing to achieve mirror finish, complete all as specified and directed. |
| 149 | Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe, fixed, complete all as specified and directed. |
| 150 | Vitreous China Urinal, Half stall type, white including PVC waste pipe, including providing and fixing plugs, beding urinal against wall in cement mortar 1:2 securing urinal plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe including fixing supply pipe to flushing cistern trap and including 32mm bore PVC waste pipe and fixed, complete all as specified and directed. |
| 151 | Wash basins, Vitreous China (Flat back or angle back type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia including Pillar taps fancy type, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot" or ‘Cold" with long screwed shanks and fly-nuts, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed, completeall as specified. |
| 152 | 600mmx450mm bevelled edge looking mirror of selected quality with 6mm thick polished glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with CP brass screws and cup washers fixed, complete all as specified and directed. |
| 153 | Brass Chromium Plated, tubular towel rail, 19mm dia, D type, 60cm long between flanges, with brass brackets, fixed with chromium plated brass screws, fixed, complete all as specified and directed. |
| 154 | Mild steel galvanized iron water tubing 25mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed. |
| 155 | Bib taps, 15mm bore, cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed, complete, all as specified and directed. |
| 156 | Angular Stop valve/ two way angle valve, cast copper alloy, fancy type chromium plated, with wall flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed, complete, all as specified. |
| 157 | S&F 25mm dia mild steel powder coated, chromium plated with fixing brackets, stops etc. and fixed, complete all as specified and directed. |
| 158 | Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washerscomplete and making connections with existing water supply line, complete, all as specified and directed. |
| 159 | 20mm bore Stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle,screwed both ends for 20mm bore iron pipe or for unionsincluding 1 No. 20mm union cutting, threading existing GI pipe at a level of 1.8m, and fixed, complete, all as specified. |
| 160 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 110mm including fixing adjustable clamps complete, complete,all as specified. |
| 161 | PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 75mm including fixing adjustable clamps complete, complete,all as specified. |
| 162 | M & L for Brass CP mixer suitable for 15 mm dia pipe for mixing hot & cold water, fixed, complete all as specified and directed by Engr - in - Charge. |
| 163 | Soap dish, vitreous China white, approximate size 160x160x90mm, chromium plated, fixed to plugs with chromium plated, brass screws fixed, complete all as specified and directed. |
| 164 | Bottle trap 32mm bore of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms/ 40mm-270 gms) |
| 165 | Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms). |
| 166 | Factory made fully glazed PVC (frosted/ground/obscured) window/ventilator shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; completespecified and directed.Note:- Glass gauges inclusive of quoted rates. |
| 167 | Extruded aluminium alloy handles (ISI marked, fabricated type, anodised, of size 100mm, all as specified. |
| 168 | Chequered cement concrete tiles machine pressed of size 20cmx20cmx 25mm thick with grey cement and no pigment, set jointed & pointed in neat cement slurry in floors laid over and including 15mm thick screed bed in cement mortar 1:4, complete all as specified and directed. |
| 169 | Factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled 35mm thick shutters without interlocking rail and with one panel and panels of 9mm BWP commercial plywood or 12mm veneered particlewith commercial face veneers on both sides.The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, all as specified. |
| 170 | Extruded aluminium alloy handles (ISI marked, fabricated type, anodised, of size 150mm, all as specified. |
| 171 | Box type steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter and glass glazed shutter (wire and glass panels shall be measured and paid seperately) with side hung shutters with steel handle and steel peg stay dovetailed of welded including 2 Nos tower bolts 150mm long for each leaf and 10mm dia square bar grills at spacing as shown in drg welded to flat iron 40x5mm frame work, including other fittings, hinges, handles tarred hold fasts PCC blocks etc. all as shown on drg No CEPZ/TD-354/09 sheet No 1/3 to 3/3, complete all as specified and as directed by Engr-In-Charge. |
| 172 | Chromium platedbrass shower rose, type, 125mm size suitable for 15mm bore pipe with swivel joint fixed to pipe, fixed, complete all as specified. |
| 173 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to grade Fe.410-W.Gde-E-250 quality A, steel work, all as specified. |
| 174 | Anodised aluminium snap grid frame work (Size of grid 605mmx605mm) for false ceiling all as specified in clause 10.38.1 on serial Page No 216 of SSR Part-I-2009, including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, including 12mm thick gypsum board in ceiling fixed with screws as per manufacturer instructions, all as specified and directed, including necessary scaffolding all as specified and directed. |
| 175 | Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes and all as specified and directed. |
| 176 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified. |
| 177 | Point wiring with 1.5 Sqmm copper conductor FRLS (Multi strand) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduit medium grade, ISI marked of suitable size with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FLRS as phase, neutral and earth wire connected to common earth dolly and including concealed pressed steel/ cast iron of suitable sizes (modular sunken box) terminal boxes made from 1.60 mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. and modular cover plate as top cover for one light point or one fan/exhaust fan point or one bell point, independent, controlled by one way switch/ push button complete all as specified and directed.Note:-i) Wiring colour code i.e Red/Yellow/Blue for phase, Black for neutral and Green for earth shall be maintained. (ii) Rate of cutting chases, cement plaster, white wash and making surface good as existing surface included in quoted rate. (iii) Point wiring is considered for Modular Switches and sockets. Rate of Metallic Sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate. (iv) Rate of modular switch and sockets will be paid seperately under relevant item. |
| 178 | All as per serial item No "177" above, but for one 3 pin 5 Amps socket outlet on the same board, complete all as specified and directed. |
| 179 | All as per serial item No "177" above, but for one 3 pin 5 Amps socket outlet on the independent board, complete all as specified and directed. |
| 180 | All as per serial item No "177" above, but for 3 pin 15 amps socket out let on independentwith 2.5 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, complete all as specified and directed. |
| 181 | Switch piano flush type, single pole, one way, 6 Amps 230V fixed, all as specified. |
| 182 | Socket outlet combination Two -in -One 3 pin 6 Amps flush type, 230 volts AC multipurpose, fixed, all as specified. |
| 183 | Socket outlet combination Two -in -One 3/5 pin 6 and 16 Amps flush type, 230 volts AC multipurpose, fixed, all as specified. |
| 184 | Fixed in repair ceiling fan regulator step type, electronic type on the existing phenolic laminated sheet etc. varying 5 Speeds 230 Volts, 50Hz, suitable for 1200/ 1400 mm sweep ceiling fans, all as specified. |
| 185 | Ceiling rose, three phase, 3 terminals 65x20mm, PVC/Polycarbonate, insulated body, fixed in repair all as specified. |
| 186 | Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 12 way, 240 volts with 200 Amp rated bus bar, all as specified. |
| 187 | M & L for vertical DB iron clad factory made TPN 4 Way, MCCB as incomer and MCB SP as out going, double door DB IP 43 protection level, incl Blanking plate, lugs etc complete and neutral link with one MCCB 4 pole 415V 100 Amps rating with rupture capacity 16KA incl connection, fixing flushed to wall, necessary grouting, making good with CM 1:4 and painted to match exisitng wall color, complete. (outgoing MCB will be measured seperately) |
| 188 | MCB SP 6 to 40 Amp, 240 Volts, 10 KA, C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs. |
| 189 | MCB SPN 32 Amp, 240 Volts, 10 KA C series including taking out old, all as specified.Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs. |
| 190 | MCB TPN 63 Amp, 415 Volts, 10 KA C series including taking out old, all as specified.Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs. |
| 191 | M & L for sub main wiring withtwo single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade,cable 6 sqmm copperconductor and connected to common earth dolly complete as directedincluding taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. |
| 192 | Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver all in one fxture, 10 watt LED and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, including taking down old light fitting, complete all as specified. |
| 193 | Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver all in one fxture, 20 watt LED and making connection with 3 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, including taking down old light fitting, complete all as specified. |
| 194 | Taking down ceiling/exhaust fan of 1200/250/300mm sweep, any make from existing position of any height by disconnecting electrical connections and transporting to workshop. dismantling complete the ceiling/exhaust fan parts i.e. blades, fan rod, canopy, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning reassembling after duly painted with one coat of synthetic enamel paint of approved quality and colour (spray painted) and marked with MES No also and testing of ceiling fan as directed. Inspection of ceiling/exhaust fan in presence of Engr-in-charge/JE (or rep of department) after dismentling spares parts. Transporting ceiling/exhaust fan back from work shop to site including hanging/ fixing same or different location and connecting up with 2 core copper cable and testing etc complete all as required at site and directed by Engr - in - Charge. |
| 195 | M&L for rewinding of ceiling fan of any make/model/sweep including removal of existing burnt winding carefully from slots, cleaning the slots throughly with suitable cleaning agent, applying slot insulation and rewinding with super enamelled copper conductor of same gauge/same number of turns as that of exisiting and connecting the coil suitable to operate on 230V, single phase, AC supply, permanent capacitor type, tying the winding and applying air drying the winding throughly and all as specified and directed. |
| 196 | Taking down water storage heater(Geyser) of 25 liters capacity from electric socket and disconnecting from PVC connection, water supply and refixing at same / different location after cleaning of geyser tank and preparation to old painted surface of geyser and painting with two coats of synthetic enamel paint (white colour) by using gun and refixing the same/different location duly grouting nuts, bolts washers and connecting to existing water connection making leak proof, complete, all as specified and as directed by Engineer-in-Charge. complete all as specified. |
| 197 | Endura Pearl 45W new generation energy saving and environmental friendly long life LED Bldg security light made up of pressure die case aluminium housing with high power LED as lighting source an lens enbedded PC cover having TOP opening seperate toughted glass/verminproof driver compartment, SPDs with IP66 protenction and impact resistancee of IK07 connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of suitable size, including taking down old, complete all as specified and directed. |
| 198 | Concealed Single pole and neutral sheet metal enclosure with a two pin and earth plug top and socket complete with one single pole MCB 20 Amps including taking out old, complete all as specified. |
| 199 | Replacement of motor suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection, complete all as specified and as directed. |
| 200 | Replacement of blade suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed. |
| 201 | Replacement of plastic body suitable for exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed. |
| 202 | Supply and replacement of louvers suitable for plastic body exhaust fan of size 200/250mm sweep and making necessary connection complete all as specified and as directed. |
| 203 | XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 35 Sqmm 3.5 core laid in trenches passing through pipe/ ducts/ surface of wall ceiling etc including testing after laying, including taking out old, complete all as specified. |
| 204 | Sand cushioning to under ground cables, 8 cm thick layer before laying and testing the cable and 15 cm thick after laying and testing ofthe cable in trenches complete all as specified in Clause 19.75 of MES SSR 2020 Part-I and directed by Engr-in-Charge. |
| 205 | Sub class "B" bricks old size, as cable protection cover, laid dry, flat, transversally along the length of cable, on sand cushioning, with width equal to the length of the brick, complete all as specified and directed. |
| 206 | M&L for 50mm dia GI pipe light grade as in trenches, across road or pole, complete all as specified and directed. |
| 207 | Replacement of Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15 mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixingarrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electricalplate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. NOTE:- Item of earthing includes the cost of 7.5m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work. |
| 208 | Supply and fix modular switch piano flush type one way 6 Amps, 1 module, 230V, Fixed complete all as specified. |
| 209 | Supply and fix modular switch piano flush type one way 16 Amps, 1 module, 230V, Fixed complete all as specified. |
| 210 | S&F Modular socket 6 Amp 3 Pin, two module 230 Volts. |
| 211 | S&F Modular socket 6/16 Amp 5 Pin, two module 230 Volts. |
| 212 | Supply and fix modular cover plate with frame, 3 module all as specified and as directed by Engr-in- Charge |
| 213 | Supply and fix modular cover plate with frame, 8 module all as specified and as directed by Engr-in- Charge |
| 214 | Supply and fix modular metal flush box 3 module Fixed, complete all as specified. |
| 215 | Supply and fix modular metal flush box 8 module Fixed, complete all as specified. |
| 216 | Single pole and neutral enclosure with a two pin and earth plug top and socket complete with one double pole MCB 20 Amps, complete all as specified. |
| 217 | MCB TPN 100 Amp, 415 Volts, 10 KA C series including taking out old, all as specified.Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs. |
| 218 | Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 8 way, 240 volts with 200 Amp rated bus bar, all as specified. |
| 219 | Supply and fixing of Exhaust fan (domestic purpose) of sweep 300mm, single phase, with louver shutter and connecting with electrical system, including provision of cable copper flexible, PVC three core 23/0.0076 from ceiling rose to fan and grouting of holding down bolts in and including PCC M-15 (nominal mix) blocks, fixed on wall with angle iron frame of size 35 mm x 35 mm x 3 mm complete all as specified and directed by Engr - in - Charge. Note : (i) The contractor shall make necessary opening in existing walls & prepare the surface in shape & making necessary fixing arrangement of exhaust fan & grouting of suitable holding nuts & bolts in PCC 1:2:4 type B1 & make good the surface after completing the work. (ii) Unit rate quoted deemed to be included this aspect. |
| 220 | Supply and installing of the electric water storage heater of ABS body type of 25 litre capacity with rated power 2 KW, 5 star rated, vertical type, thermally insulated Mild steel tank with glass line coating inside the tank alongwith glass lined incoloy heating element with anti corrosive magnesium anode, NRV, thermostate, indicators and temperature adjustable knob including steel braided flexible connection for pipe of size 15mm dia bore GI hexagonal adopters/Nuts on both side of inlet (cold water supply) and outlet (hot water supply) and including provision of wall mounting arrangement and mounting on wall with suitable size of anchor bolts with complete connection of water including testing after installation, complete all as specified and as directed by Engr-In-Charge. |
| 221 | Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 16 watt LED, 230V, and making connection with 2 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed. |
| 222 | Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 20 watt LED, 230V, and making connection with 2 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed. |
| 223 | Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as required at site and directed by Engr - in - Charge. |
| 224 | Supply and fixing of pandant 19"" Artistic (white) smart LED, smart LED (3 Nos bulb included) E-27 holder and plug type bulb capacity 9W smart LED make Wipro pandant cord length 55"" (adjustable) bulb cart No. WPR-BL1-10001, complete all as specified and as directed by Engr-In-Charge. |
| 225 | S&F Modular fan regulator step type 100 Watt one module 230 volts. |
| 226 | MCB SP 6 to 40 Amp, 240 Volts, 10 KA, C series, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs. |
| 227 | MCB SPN 32 Amp, 240 Volts, 10 KA C series, all as specified.Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs. |
| 228 | M & L for sub main wiring withtwo single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade,cable 6 sqmm copperconductor and connected to common earth dolly complete as directed. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit. |
| 229 | LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 20 watt LED, 230V, and making connection with 2 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed. |
| 230 | 35W new generation energy saving and environmental friendly long life LED Bldg security light made up of pressure die case aluminium housing with high power LED as lighting source an lens enbedded PC cover having TOP opening seperate toughted glass/verminproof driver compartment, SPDs with IP66 protenction and impact resistancee of IK07 connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of suitable size, complete all as specified and directed. |
| 231 | Energyy efficient ceiling fan, 1200mm sweep, single phase with louver and connecting up including provision of three core flexible copper wire of size 1.5 mm Sqmm from connector to ceiling fan complete in all respect, complete all as specified and directed. |
| 232 | Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15 mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75m long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixingarrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electricalplate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. NOTE:- Item of earthing includes the cost of 7.5m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
