Military Engineer Services-MES has published Tender For Additional/Alternator To Mh Klp For Accommodation Of Mdc Auth Assets Under Ge Panaji Goa. Submission Date for this Tender is 15-04-2024. Building Work Tenders in panaji Goa. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-04-2024 |
| 2 | 09-Apr-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 15-04-2024 |
| Sl. No. | Item Description |
| 1 | S&F Cabinet in required sizes ( min height above plateform/floor 0.90m and min width 0.60 m)at site made out of 18 mm thick one side decorative teak face finish sheet consisting of carcass 18 mm thick PVC sheet & providing of shutters made out of 18 mm thick one side teak face finish PVC sheet all required brackets 5.5 screws etc. The panels shall be fabricated using adhesive and screws where required. All the edges shall be covered with 2 mm thick edge bending tape or 90 degree edge bend finish as per make and specification complete all as specified and diected by Engineer-in-Charge. Note :- Quoted rate deemed to included the cost of all necessary fittings like SOSS hinges of reqd size invisible type and handles etc. After completion of cabinet, measurements for the purpose of recording in MB, abstract and payment shall be taken onlyfor front face. Quoted rate deemed to included the cost of side, back and bottom paneled and necessary locking arrangements etc .Size of cabinate near Sink will be adjusted as per site requirement. |
| 2 | S&F factory made solid PVC door frames of size 50mmx47mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and required at site, complete all as specified and directed by Engr-in-Charge. |
| 3 | S&F factory made Solid PVC Moulded door shutter with wood free EPS, 28 to 30 mm thick (stiles), with 2,4,6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per specifications and required at site and directed by Engr-in-Charge. |
| 4 | S&F for Mild steel Butt hinges medium weight 75 mm in sizes complete all as specified and directed. |
| 5 | S&F Brass locks cupboard grade 1 size 50 mm 2 levers complete all as specified and directed. |
| 6 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite |
| 7 | S&F Powder coated of any colour alumininium( min thickness of powder coating not less than 50 micron)door shutters, of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised anodised aluminium snap beading screws complete all as specified and directed. |
| 8 | S&F Powder coated aluminium (min thickness of powder coating 50 micron ) work for partitions (fixed portion) and similar work in doors, windows and ventilators with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neprene gasket and other required necessary items. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, CP brass/stainless steel screws, all complete as per site requirement and directions of Engr-in-Charge. |
| 9 | S&F Sheet glass ordinary quality 4.8 mm n exc 0.5 Sqm in each pane. Sheet glass is grounded or obscurred or frosted on one side complete all as specified and directed. |
| 10 | S&F 2 mm thick Plain colour PVC sheet fixed or laid on to doors/partitions and similar work complete all as specified and directed. |
| 11 | S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in required position with necessary items waste pipe etc and connecting union to pipe, overall size 495mmx420 mm bowl size 410 mm x 330 mmx160 mm complete all as specified and directed. |
| 12 | All as above Item No11 here-in-before but with drainage board overall sizes 915 mmx460 mm and bowl size 410mm x 330 mmx160 mm complete all as specified and directed. |
| 13 | Making good wall or floor tiling to match existing complete all as specified and directed |
| 14 | Making goodwall or floor painted or distempered finish to match existing |
| 15 | S&F fancy type bib taps 15mm borechromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes or brass ferrule and fixed complete all as specified and directed. |
| 16 | S&F fancy type 15 mm pillar taps, cast copper alloy with captan head chromium plated screwed down high pressure with or without lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. |
| 17 | S&F Brass Chromium plated shower roses 125 mmwith or without swivel joints complete all as specified and directed. |
| 18 | S&F wash basins vitreous China size 550x400 mm(Flat back or angle back type)including brackets andcutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 19 | S&F wash basins vitreous China size 450x300 mm(Flat back or suitable for fixing in corners of wall)including brackets andcutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe complete all as specified and directed. |
| 20 | S&F Steel water tubing medium grade galvanised of 15 mm bore with all necessary fittings and fixtures like tee, bend, reducers etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 21 | All as above Item No 20 here-in-before but 20 mm bore dia |
| 22 | Cutting existing steel tubing 15/20 mm bore for alterations or additions complete all as specified and directed |
| 23 | Screwing existing steel tubing 15/20 mm bore pipefor alterations additions with necessary GI fittings( or lengthing screw on pipe to form connector) complete all as specified and directed. |
| 24 | Demolition of precast concrete block walling including all quoins, arches etc abovefloors and pavings of any thickness (below or above ground level). |
| 25 | M&L Pre-cast cement concrete block masonry C-1 1:3:6 (20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed. |
| 26 | M & L for rendering 10mm thick in cm 1:4 on fair faces of concrete or brickwork finished even and fair without using extra cement |
| 27 | M & L for preparing new plastered surfaces of wall and applying 2 coats of oil bound distemper over a coat of primer with alkali resistant priming coatall as specified and directed. |
| 28 | Cement concrete type B-2 1:2:4 ( 40 mm graded aggregate) 100 mm thick as in floor/plateforms complete all as specified and directed. |
| 29 | M & L glazed ceramic coloured tile 300mmx200mmx6-7mm set & jointed in neat cement slurry and pointed in neat cement slurry and pointed in coloured cement to match over 10mm thick plastering in CM 1:4 as a backing coat complete all as specified and directed. |
| 30 | M & L Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 31 | Supply and fix stop valves, cast copper alloy 15 mm bore fancy type CP screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed. |
| 32 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good with existing floor or wall finish tiles etc , cutting not exc 10 cm girth |
| 33 | S&F plain, solid straight chowkats and frames of 1st class softwood wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed complete all as specified and directed. |
| 34 | S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides with vision panels or peep holes, Square or rectangular as per site requirement. Complete all as specified and directed. |
| 35 | Supply and Fix Alu. Anodised barrel tower bolts 100mm long extruded section complete all as specified and directed. |
| 36 | S & F 100mm long Mild steel butt hinges medium weight complete all as specified and directed. |
| 37 | Suppy & Fix Alu.Anodised handle 150mm long extruded fabricated type complete all as specified and directed. |
| 38 | Supply and fix aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 250mm size complete all as specified and directed. |
| 39 | Framed & fixing plain fillets square, rectangular or triangular in section clean sawn of sectional area exc 13 and n exc 25 Sqcm of 2nd class softwood comelete all as specified and directed. |
| 40 | S&F Boarding with nails in any situation like partitions/coverage clean sawn planed with both sides butt joints 30 mm thick complete all as specified and directed |
| 41 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc, 1.5 Sqm each complete all as specified and directed. |
| 42 | All as per Sl Item No. 41here in before but exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and directed. |
| 43 | Taking down chowkats or frames with shutters (without taking off shutters from the frame)exc 1.5 Sqm and n exc 4.00 Sqm and refixing in other openingseach complete all as specified and directed. |
| 44 | M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 45 | M & L for RCC 1: 2:4 (nominal mix) type B0 , nominal mix with 12.5mm graded stone aggregates as in slabs, landings,lintels staging for water tank, slab supported on walls, beams and columns in floors, roofs landing, balconies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed. |
| 46 | M & L for TMTbars 10mm dia and over cut to length bent to shape reqd including cranking bending, spirally for hooping for columns, henking end and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 47 | Renewing tiles Glazed/floor in patches area n exc 5 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed. |
| 48 | S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles as specified and erected in position and securing runners with holdfasts and brackets complete. |
| 49 | S&F CPVC pipes SDR 11 & Plain CPVC SDR 11, 32mm dia fittings fixed complete to walls, ceilings or in floors etc with help of clamps or as required complete all as specified and directed. |
| 50 | Supply and fixing in CPVC pipe outer dia 32mm Brass Elbow |
| 51 | Supply and fixing in CPVC pipe outer dia 32mm Brass Tee |
| 52 | Supply and fixing in CPVC pipe outer dia 32mm Male Brass Threaded Adaptor (MTA/ MBTA) |
| 53 | Supply and fixing in CPVC 32mm Female Brass Threaded Adaptor (FTA/ FBTA) |
| 54 | Supply and fixing in CPVC 32mm union |
| 55 | Supply and fixing in CPVC 25mm Ball valve |
| 56 | Supply and fixing in CPVC 20mm Ball valve |
| 57 | Material and labour for point wiring for one light point controlled by one way switch complete with 1100 Volts grade 1.5 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cablefixed/ drawn through and including white/ ivory colour heavy duty PVC casing/ capping with accessories and fixing on wall/ ceiling including PVC board with cover (ISI marked)for mounting switches, sockets, regulators etc and providing one run of 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. (a)For one 5 Amp independent socket point controlled by one switch |
| 58 | Material and labour for point wiring for 15 Amp independent socket point controlled by one switch complete with 1100 Volts grade 2.50 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable fixed/ drawn through and including white/ ivory colour heavy duty PVC casing/ capping with accessories and fixing on wall/ ceiling including PVC board with cover (ISI marked)for mounting switches, sockets, regulators etc and providing one run of 2.5 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 59 | Material and labour for concealed point wiring for 15 Amp independent socket point controlled by one switch complete with 1100 Volts grade 4.00 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable fixed/ drawn through PVC conduit including all counduit accessories/ fittings/ junction box/ inspection covers etc of heavy grade, ISI marked and with and including sunk terminal boxes of factory made 16 guage pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cupwashers, for mounting of switches, sockets etcand fixing on wall including and providing one run of 4.00 sqmm PVC insulated unsheathed multistranded FRLS grade copperconductor cable as earth continuity wireand connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. |
| 60 | Supply and fix switch flush type, single pole, one way, 5Amps, 240 Volts, white finish complete all as specified |
| 61 | Supply and fix socket outlet, 5 pin, 5Amps, flush type, white finish complete all as specified |
| 62 | Supply and fix switch socket combination, 2 in1, 3/5 pin, 5/15Amps, flush type universal, 240 Volt, white finish complete all as specified |
| 63 | Material and labour for sub main wiring with two single core PVC-FR insulated unsheathed stranded copper conductor cable of size 4 Sqmmfixed/ drawn through and including heavy duty PVC casing/ capping with accessories with one single core PVC-FR insulated unsheathed stranded copper conductor cable of size 4Sqmm as a continuous earth wire complete all as specified and directed. Note: Two single core cables and one run of earth copper conductor/ casing capping will be measured and paid as one unit length. |
| 64 | Material and labour for sub main wiring with two single core PVC-FR insulated unsheathed stranded copper conductor cable of size 6 Sqmm fixed/ drawn through and including heavy duty PVC casing/ capping with accessories with one single core PVC-FR insulated unsheathed stranded copper conductor cable of size 6Sqmm as a continuous earth wire complete all as specified and directed. Note: Two single core cables and one run of earth copper conductor/ casing capping will be measured and paid as one unit length. |
| 65 | Supply and fix sheet metal single pole and neutral enclosure for 2 pole and earth metal plug and socket for incorporating 20amp SPN MCB with and including 20amp SPN MCB including removing the old one complete all as specified and directed. |
| 66 | S&F IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Ampsrated bus bar, neutral link each bar and din rail complete all as specified and directed. |
| 67 | S & F sheet metal enclosure double door verical type for DB"s when MCCBs to be used Triple pole & neutral 4 ways 415 volts with 200 Amps rated bus bar fixed sunk / flush to wall including MCCB 100 Amps as incommer complete all as specified and as directed. |
| 68 | Supply and fixing amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) SPN 63 Amps of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 69 | Supply and fixing amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB) SP 6 to 32 Amps of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 70 | Supply, installation, testing and commissioning of Transformer, step-down, 11/0.433 KV, outdoor type , copper wound capacity 63 KVA, Level II with standard fittings including all jointing materials, connecting with electrical system, earthing complete all as specified and directed. |
| 71 | Supply and installation of Ring main unit one VCB, two SF6 filled load break switch each of 11 KV ,630 Amp. |
| 72 | Supply, Lay & fix XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sq. mm 3 core. |
| 73 | Supply & Fix Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm. |
| 74 | Excavation in trenches not exceeding 1.5 m width and not exc 1.5 m in depth andgetting out in hard/dense soil for removing/laying of UG cables / Pipes etc |
| 75 | Returning, filling including spreading leveling watering and well ramming in layers not exc 25 Cm thickness using excavated hard/dense soil. |
| 76 | Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point for soil |
| 77 | Sand filling under floors or in foundations including watering and consolidation |
| 78 | Supplying and laying reinforced precast concretecable cover, class HV, type 1 with peak, size 300mm x l80mm x 40mm |
| 79 | Supplying and laying reinforced precast concretecable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm. |
| 80 | Supply and Fixing Galvanised iron light grade pipe ISI marked of size 80 mm bore for passing of cable fixed to wall poles or laid on trench complete and including fittings complete all as specified. |
| 81 | Design Fabricating, supply and errectingconnecting and testing totally enclosed LT cubicle panel board3 Phase 4 wire system outdoordouble door front and back openingtype, slopedcanopy (Hood) on topextended 100 mm all arround, separate compartment for each control gear, cable alley, provision ofknock out type plates for various sizes of cable up to 120 Sqmm 3.5 core in and out , incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory madefabricated out of3.15 mm thick CRCA sheet duly treatedthrough 7 tank pre treatment process andpaintedwith epoxy powder coated mat finish ofSIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back, and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Anle iron frame of 50 mm X 50 mm X 6 mm thick duly painted and embeded in PCC 1:3:645 CM below ground level and 15 Cm above ground level and consisting the following (a) Bus bar aluminium duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of "F" class insulators made of non hygroscopic, non combustible, track resistant high strength FRP insulators200 Amps for phases andneural set of 4 for RYB &N set of 04-01 set. (b) MCCB 4 Pole, 415 Volts, 50 Hz 160 Amps with adjustable type 25 KA - 01 Nos (in coming). (c) MCCB TPN 415 Volts 50 Hz 100 Amps 25 KA repturing capacity 02 (02 Nos as out goings 01 for MDC Block Main DB and 01 No as spare). (d) MCCB TPN 415 Volts 50 Hz 63 Amps 16 KA repturing capacity 01 (01 No as out going for AC Load) or LED Type for RYB set of 3 - 01 set. (f) Rotary type selector switch 2 position 240 V (g) Volt Meter 0 -500 Volt with selector for RYB&O. (h) Ampere meter 0-200 Amps with selector switch ct operated with ct Coil |
| 82 | Surface excavation n. exceeding 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil in Transformer Yard complete all as directed. (6+3+6+3) X 0.3 = 5.4 Sqm |
| 83 | M & L for cement concrete in foundations, filling and mass concrete, PCC 1:3:6 type C2 (40 mm graded aggregate) complete all as specified and directed. (2.0 X 2.0 X 0.2 = 0.8 Cum |
| 84 | M&L PCC concrete block masonary with solid blocks exc 10 cm in width and setting in mortar complete in cement mortar 1:6 type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed. (04 Sides X 1.5 X 1.2 X 0.23) = 1.66 Cum) |
| 85 | M&L for rendering 15mm thick cement mortar 1:4 on fair faces of brick work or stone or concrete surfaces fiishing the surface even & smooth without using extra cement. (4 sides x 1.5 X 1.2 = 7.2 Sqm) |
| 86 | M & L for preperation of new plastered surface of external walls and applying 2 coats of cement base paint, over a coat of alkali resistant primer complete all as specified and directed. |
| 87 | M & L for 50 mm thick Cement Concrete typeB-11:2:4 (20 mm graded aggregate) in coping and including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete alla s specified and directed. (1.5 X 1.5 X 0.2 = 0.45 Cum) |
| 88 | Excavating in post holes( or similar holes) each n exceeding 0.5 cu.m, getting out ,returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm of surface in hard/dense soil for embeding fencing post. |
| 89 | M&L for providing plain cement concrete (1:2:4) type B2 using 20 mm graded aggregate as in lintel upto 1.5 m clear span, seasmic and other bands,plinth courses, parapets, railings, copings, bed plates, kerbs, water troughs and the like includingnecessary form work and demolition of old concrete of any description complete all as specified and directed. |
| 90 | M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) including demolition of old brick work built in cement mortar complete all as specified and directed. |
| 91 | M & L forCross arms, bracing, supports, clamps and back plate, fabricated from structural steel sectionincluding nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as directed complete all as directed. |
| 92 | Supply only Chain link MS Galvanized fencing 50 mm Mesh in replacement of Unserviceable barbed wire. (6+3+6+3) X 2.1 = 37.8 Sqm X 5 Kgs = 189 Kgs |
| 93 | Fixing only chainlink fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire. |
| 94 | M&L for hard core of gauge not exc 40 mm deposited spread and levelled in layers not exc 15 cm watered and rammed to a true surface complete all as specified and directed. (6 X 3 X 0.15 CM = 2.7 Cum |
| 95 | Suppy & Lay and orfix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. Mm X 3.5 Core. |
| 96 | M& L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less"than 1.5 metres below normal ground level, connected to galvanised earth lead 32×6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion |
| 97 | M&L for disconnection of electrical connections carefully including AMF panel and shifting of 125 KVA silent DG Set from old location of Military Hospital at Panaji to new MH KLP by using crane and installation as directed including necessary transportation to Bambolim, re-connection of all electrical connections like cable/earthing etc including testing and commissioning all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
