Bharat Sanchar Nigam Limited-BSNL has published Tender For Construction Of 13 Buildings At Various Locations In India For Unified Network Management System Unms Regional Network Centre At Pune Sh Furniture Works. Submission Date for this Tender is 21-03-2024. Building Work Tenders in pune Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | PART A: Godrej Providing and placing in position Victoria Center Table made up of solid MDFof Godrej or equivalentmake of size 1199x378x599 mm Cappuccino shadeall complete as per the directions of Engineer in Charge. |
| 2 | Providing and placing in position Metallic single Bed : EQ Model of Godrej or equivalent make (of size 78"L x 36" W) with slatted mattress base with headboard, mosquito net Rod & Metal sheet basket made up of Tubular steel sections, powder coated matt taupe white color all complete and as per the directions of Engineer in charge. |
| 3 | Providing and placing in position mattress for single bed : Hero Model of Godrej or equivalent make (of size 72"L x 35"W x 4" Thick), made of support layer of bonded foam and comfort layer of PU foam, all complete as per the direction of Engineer in Charge. |
| 4 | Providing and placing in position wooden corner table of size 600x600x455mm Edward walnut model of Godrej or equivalent makein Cappuccino shade all complete as per the direction of Engineer in Charge. |
| 5 | Providing and placing in positionKing size Bed SHEESHAM of modelUthopia of Godrej or equivalent make (of size 1905x2060x420mm, headboard 1008mm high) made up of MDF Engineered wood all complete and as per the directions of Engineer in charge and manufacturers specifications. Bed set shall be sturdy and aesthetically pleasing, made from Sheesham (rosewood). The bed base shall consists of hydraulic storage making it easier to access and keep valuables inside.Overall Size : Length : 206cm Width : 190.5cm Bed Height : 42cm Bed with Headboard Height : 100.8cmbed -metal frame materials & dimensions:(gauge +/-0.1mm):m.s pipe 20x20 (square pipe), 30x5 (draw strip), 25x6 (draw strip), 20x5(draw strip), 8mm draw rnd sariya, 12mm draw rnd pipe. decoration materials & specifications: (density / type) 25mm softy foam, fevicol, 3 ply thermacol, 21x31 poly bag, etc. |
| 6 | Providing and placing in position mattress for King size bed : Hero Model of Godrej or equivalent make (of size 78"L x 72"W x 5" Thick), made of support layer of bonded foam and comfort layer of PU foam, all complete as per the direction of Engineer in Charge. |
| 7 | Providing and placing in position Uthopia bedside wooden tablemade up of Sheesham wood of Godrej or equivalent make (of size 450X 400 X450 mm ) , all complete and as per the directions of Engineer in charge. |
| 8 | Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 860W x 905D x 855H. The seat should bemade of PU foam with Density 28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should beupholstered with fabric or leatherette. 2) BACK FOAM: The back should bemade of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. Understructure should bemade up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over understrucrure for cushioning effect. It should bea welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. |
| 9 | Providing and placing in position push/pull type Metallic Optimizers/ Mobile storage system having 1 static unit model Optz SS1 1200mm and 1 Locking unit model Optz SL1 1200mmof size1980H X 1200W X 400D, and 3 twin/back to back units model Optz TM1 1200mm of size 1980H xX 1200W X 800D, with Ergonomically designed C shaped Handles and centralised locking system of Godrej or equivalent make with 100% VOC free powder coating , wheel drive andthe rails of 4metre length shall be chemically grouted in the floor for right allignment all complete as per the directions of Engineer in Charge. |
| 10 | Providing and placing in position2 door Personal Locker Unit of size 375x470x1950mm: Model Gain Pro of Godrej or equivalent makeall complete as per the directions of Engineer in Charge and manufacturers specifications. The Legs shall be fitted with screw type leveler. The unit shall be made from combination of Top panel(0.5mm CRCA), side panel(0.5mm CRCA), Bottom panel(0.5mm CRCA), Back panel(0.5mm CRCA), Top Bottom stiffener(1.2mm CRCA) and End Cover(0.5mm CRCA). *CRCA "D" Grade as per IS-513.Shelving - It shall be a 10 bend panel made of 0.5mm Thick CRCA (D. Grade, IS-513) Uniformly distributed load capacity of each shelf is 20kg . Shelves for 2 Door locker without envelope slot. |
| 11 | Add on unit for Gain Pro 3 door PLU |
| 12 | Part B: Monarch (Merryfair)Providing and placing in position Fulcrum HB P069YFB6SV High back Chair ofMerryfair or equivalent make. The overall dimensions of the chair shall be: 1300 mm (H) X 700 mm (W) X 460 mm (D). The cushion headrest of the chair shall be adjustable for 5cm in height and for 40 degrees of tilt.Armrest of the chair shall be 4 way adjustable armrest, Height, Width, swivel angle and depth adjustable armrest for 6cm and swivel can be adjusted to 3 angular positions also available with height adjustability for 6cm and width adjustability for 5cm. The base of the chair shall be nylon base with 5 legs and dual wheel castors. The backrest of the chair shall be a breathable polyester mesh suspension which allows improved ventilation and transpiration, to provide exceptional thermal comfort. back frame is molded of resilient black polypropylene. The lumber pad of the chair shall be conveniently adjustable through side knobs, without getting up from the chair, to customize the exact support for various spinal shapes. backbone of the chair shall be made of die-cast aluminium in a luxurious polished finish or a glossy silver epoxy powder coating. The chair shall have synchronized mechanism with tilt- tension control, multi position tilt lock and pneumatic seat height control. The work shall be carried out as per guidance and instructions received from engineer in charge. |
| 13 | Providing and placing in position Fulcrum Mid back Chair (P068YFB6SV) of Merryfare or equivalentmake . The overall dimensions of the chair shall be: 1080 mm (H) X 700 mm (W) X 460 mm (D). Armrest of the chair shall be 4 way adjustable armrest, Height, Width, swivel angle and depth adjustable armrest for 6cm and swivel can be adjusted to 3 angular positions. also available with height adjustability for 6cm and width adjustability for 5cm. The base of the chair shall be nylon base with 5 legs and dual wheel castors. The backrest of the chair shall be a breathable polyester mesh suspension which allows improved ventilation and transpiration, to provide exceptional thermal comfort. back frame is molded of resilient black polypropylene. The lumber pad of the chair shall be conveniently adjustable through side knobs, without getting up from the chair, to customize the exact support for various spinal shapes. backbone of the chair shall be made of die-cast aluminium in a luxurious polished finish or a glossy silver epoxy powder coating. The chair shall have synchronized mechanism with tilt- tension control, multi position tilt lock and pneumatic seat height control. The work shall be carried out as per guidance and instructions received from engineer in charge. |
| 14 | Providing and placing in position Fulcrum LB YF Low back Chair (P067YFB6SV) of Merryfare or equivalentmake. The overall dimensions of the chair shall be: 1000 mm (H) X 700 mm (W) X 460 mm (D). Armrest of the chair shall be 4 way adjustable armrest, Height, Width, swivel angle and depth adjustable armrest for 6cm and swivel can be adjusted to 3 angular positions. also available with height adjustability for 6cm and width adjustability for 5cm. The base of the chair shall be nylon base with 5 legs and dual wheel castors. The backrest of the chair shall be a breathable polyester mesh suspension which allows improved ventilation and transpiration, to provide exceptional thermal comfort. back frame is molded of resilient black polypropylene. The lumber pad of the chair shall be conveniently adjustable through side knobs, without getting up from the chair, to customize the exact support for various spinal shapes. backbone of the chair shall be made of die-cast aluminium in a luxurious polished finish or a glossy silver epoxy powder coating. The chair shall have synchronized mechanism with tilt- tension control, multi position tilt lock and pneumatic seat height control. The work shall be carried out as per guidance and instructions received from engineer in charge. |
| 15 | Providing and placing in position Cafeteria Chair without arms of Monarch or equivalentmakemodel kopio. The overall dimensions of the chair shall be 490mm (W) X 550mm (D) X 810mm (H). The shell of the chair shall be made up of molded polypropylene.Legs should be made up of 19mm tubular steel finished in silver proxy finish. The work shall be carried out as per guidance and instructions received from engineer in charge. |
| 16 | Providing and placing in position Café Table of size 1800x800x750mm of Monarch or equivalent make. The Table top shall be made up of 25mm thick E1 Grade Pre Laminated Particle Board with matching 2 mm thick PVC Edge Banding. The table top shall be fixed with understructure and legs through CRCA powder coated tube, with powder coating of a range of 60-80 microns.The work shall be carried out as per guidance and instructions received from engineer in charge. |
| 17 | Providing and placing in position Foldable Lecture Room Table of size: 1200 mm (L) X 750 mm (W) X 750 mm (H) of Monarch or equivalent make. The Table top shall be made up of E1 Grade pre laminated particle board of 25mm thickness with 2mm thick PVC edge banding.Understructure: Die cast connector leg vertical, metal legs with Table top foldable mechanism and lockable castors with MS powder coated embossed modesty of 450H below the table top. The work shall be carried out as per guidance and instructions received from engineer in charge. |
| 18 | Providing and placing in position Domino Sofa Set of Monarch or equivalent make.The sofa set has to be modular systems with Linear and corner Modules. Each Modular shall be securely connected with Neighboring module using and integrated linking bracket which can be refastened by an Allen key. It shall be easily reconfigured at any place by just using Allen Keys. The coner module has to be supplied with 2 Nos. Right angled brackets, that doubles as an armrest on one side. Generous armrest width allows impromptu support for computer notebooks, drinks and Friends. Each Modular of the sofa set has to be 750 mm wide and 750 mm broad with seat height to be 400 mm from ground giving healthy seating posture the back height shall be 320 mm from seat. The sofa Set has to be upholstered with Textile Fabric covering over polyurethane Foam. The Structure is a two way shell of Injection-molded polypropylene in black color, the Shell surface is adorned with patterns inspired by wood grains or Tree rings. Base feet is of injection molded black polypropylene are adjustable for height to compensate uneven floors. Linking brackets shall be made up of steel with black powder coating in a range of 60-80 microns. The work shall be carried out as per guidance and instructions received from engineer in charge. a) Corner module 425NAA00AY |
| 19 | b) Linear module 426NAA00AY |
| 20 | Part C: HNI (B P Ergo) SH: MODULAR PARTITIONS AND WORK STATIONS FULL HEIGHT MODULAR PARTITIONS - Supplyingand installation of full Height partition of M/s HNI (BP Ergo) or equivalent make of minimum 75mm thickness and should have clear space of 45-55 mm for electrical wiring. The height of partition should be 2185mm (approx). All metallic parts shall undergo a 7 stage anti rust treatment and shall be powder coated in suede finish to a thickness of minimum 45 microns. Modular Partition-The modular partitions shall not be grouted in the floors.The modular partitions shall be an assembly of the following parts:- Levellers-Each frame shall be provided with two 10mm leveling bolts which allow 15mm adjustment for floor unevenness.The levelers shall be concealed inside the skirting and shall be completely retracted inside the skirting in case of uniformly flat floors.Wall start (Optional)- This is a joinery, which is used to fix partition with wall. The section is made of 75mm (W)x 75/50mm(D)CRCA Steel. This should have necessary slots for fixing and can take wire from wall to partition. Frames shall form the basic support structure for all components and shall be of 75mm x 35mm aluminium sections. The main vertical member of the frame bearing the load of brackets and storages shall be made of 1.2mm thick aluminium sections.The connecting vertical face shall be made up of 0.8-1mm thick aluminium sections. The horizontal members shall be made of 0.8mm aluminium extrusions. Each individual module shall not be more than 700mm in height and shall not be more than 1200mm in width.Frames can have 1-3 modules in prefabricated form. Additional height shall be achieved by mounting modules over them.The bottom module shall be mounted over askirting of more than 85mm height. The skirting shall be designed so that switches can be provided on the skirting level.The Base Beam (Skirting Inner Sections) shall be made of CRCA Steel. The skirting shall be snap fitted on both sides with Skirting Plates made of 0.6mm thick aluminium extrusions.Wherever switches are provided on the skirting, the skirting plates shall have the necessary slots (Optional/As per Requirement). Frame Gasket- Frame modules shall have PVC foam Gaskets of 4mm thickness and 10mm width pasted with PVA glue along the inner periphery on both sides to prevent sound and dust transmission through the tiles.The frames shall also have 2mm x 10mm foam gaskets pasted with PVA glue on the outer periphery so as to seal the gaps between the adjacent frames. Ceiling Rail-The telescopic ceiling rails shall be made of CRCA Steel of 75mm Cross section with 0.7mm thickness.The height of the ceiling rail shall be of 50mm thick.The ceiling rail should allow an height adjustment of 10mm to 15mm upwards.Posts-The frames shall be connected at the junctions by CRCA Steel connectors.The Junction of frames shall be snap fitted with square Posts.The Posts shall be made of CRCA Steel of1.6mm thickness of section 75mm x 75mm for 2-Way & 75mm x 15mm for 3-Way. Trims-The exposed vertical and horizontal faces of the frames shall be snap fitted with curve trims. The trims shall be made of aluminium extrusions of 1mm thickness and 75mm width in a Curvature of 12mm. Wire Management- Slots shall be provided on Skirting/Tiles/Partition to fix all electrical & data points as per Requirement. Tile Finish:- The tiles pattern, colour, shade and finish as per the Architect drawing no. WD-36/3135R6, WD-37/3136R5 and WD-39/3138R5 dtd 04/11/2023 including further revisions if any. LAMINATED TILES:Laminated tiles shall be made of 8-10mm MDF (Medium Density Fibre Board) with 0.6-0.8mm Post Lamination on both sides of the tile. FABRIC TILES: The fabric tiles shall be made of 8-10mm MDF with fabric. It should be possible to replace the fabric by peeling it off. MAGNETIC PINUP TILES: The Pinup tiles shall be made of 0.6mm Galvanised Iron (GI) sheet with fabric.It should be possible to replace the fabric by peeling it off. Glass Tiles- Glass Tiles shall be 4 mm clear toughened glass are supplied and fixed from both side with all necessary interior trims and gaskets . There are two glass tiles that can be fitted and are completely interchangeable with regular tiles.a) ELEMENT FULL HT MODULAR PARTITION of M/s HNI (BP Ergo) or equivalent make - |
| 21 | Plain Glass Door of M/s HNI (BP Ergo) or equivalent make -Glass Door with Shutters shutters in the full height partition made of 12mm thick Toughened Glass including locking arrangement,Handle with Floor Spring complete. |
| 22 | Laminate Door-Laminate Door M/s HNI (BP Ergo) or equivalent make with Shutters in the full height partition made of 38mm thick Honey Comb with both side lamination with PVC lipping including locking arrangement,Handle with Door Closure,Stopper, Hinge. |
| 23 | MODULAR WORKSTATION- Supplying and installation of Modular Workstation comprises of the followings- Worktop made of 25mm thick pre-laminated particle board of approved shade. The working and non –working edges shall be provided with hotpressed 0.8-1.2mm thick PVC (Poly Vinyle Chloride) edging using special hot melt glue at high temperature. Table Top Understructure consists of CRCA Steel Powder Coated Brackets, 18mm thick Prelam Modesty Panels,25mm thick Prelam Gable Ends and by CRCA Steel Powder Coated Legs. Low Height partition of minimum 75mm thickness and should have clear space of 45-55 mm for electrical wiring. The height of partition should be 1660 mm. All metallic parts shall undergo a 7 stage anti rust treatment and shall be powder coated in suede finish to a thickness of minimum 45 microns.Tile Finishes-The tiles pattern, colour, shade and finish as per the Architect drawing no. WD-36/3135R6, WD-37/3136R5 and WD-39/3138R5 dtd 04/11/2023 including further revisions if any. a) STRAIGHT WS SIZE-1200mm x 600mm for Each User. (Without partition) |
| 24 | STRAIGHT WS SIZE-900-1050mm x 600mm for Each User.(Without Partition) |
| 25 | STRAIGHT WS SIZE-1200mm x 600mm for Each User.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision)(With One Pinup for Each User) |
| 26 | STRAIGHT WS SIZE-900/1050mm x 600mm for Each User.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision)(With One Pinup for Each User) |
| 27 | STRAIGHT WS SIZE-550/600mm x 600mm for Each User.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision)(With One Pinup for Each User)(With Divider 75mm Thick & 1660 H Partition) |
| 28 | Main Table of size 1800mm x 750mm x 730mmH with Return Table of 1500mm x 450mm x 730mmH (Without Partition) |
| 29 | Main Table of size 1800mm x 750mm x 730mmH with Return Table of 1500mm x 450mm x 730mmH.(MOUNTED ON 75mm Thick Element FRAME-1660 H,With Electrical Provision)(With One Pinup,One Marker for Each User) |
| 30 | CUBICLE WS EACH SIZE-Main Table of size 1800mm x 750mm x 730mmH with Return Table of 1200mm x 450mm x 730mmH (Without Partition) |
| 31 | Supplying and placing in position Manager table of M/s HNI (B P Ergo), model Pinnacle, or equivalent as detailed : Worktop made of 25mm thick Particle Board with Pre laminated finish with 2mm thick PVC lipping of matching shade. Understructure: 18mm thick Modesty panel and 25mm thick Gable ends with Pre laminated Particle Board finish with 2mm thick PVC Lipping of matching shade. Main Table of Size:2100mmx800/850mm with side unit of size:1200mmx450mmx750mmH with Storage underneath made of 18mm thick PLPB with 2mm thick PVC lipping of matching shade. Back unit of size:1500mmx450mmx750mmH with Storage 750mmL underneath made of 18mm thick PLPB with 2mm thick PVC lipping of matching shade. |
| 32 | P/F Winner 1 model table of size: 900mmx600mmx750mmTable shall be made with 25mm thick prelaminated partical board top supported by 18mm thick Prelam Gable Ends.Gable ends shall be fitted to the Worktop with KD Fittings & M-6 Screws at prefitted inserts below Table Top and shall be provided with 2 Nos. of glide screws for levelling of the workstation/table.All edges shall be provided with hotpressed 1mm thick PVC edging using special hot melt glue at high temperature.One No. of 18mm thick Prelaminated Modesty panel with clearence of 100-150mm from Finished Floor Level is included in the workstation. One nos Single drawer unit is included with table |
| 33 | OVERHEAD HAMPERS- Providing / Supplying Over Head Hampers made of CRCA Steel with Powder Coating with Slide up Doors/Hinge Shutters.The inside Bin is provided with 2 Nos. of Divider Flaps with locking arrangement complete, to be mounted over Element Partitions & Wall Frames only. a) SIZE-600-900mm(L) x 300mm(D) x 450mm(H) |
| 34 | b) SIZE-1050-1200mm(L) x 300mm(D) x 450mm(H) |
| 35 | ACCESSORIES-Providing and fixing Keyboard pull out trayofmade of0.8mm thick CRCA steel duly powder coated, of minimum thickness 45micron, with metallic roller slides on both sides on Telescopic mechanism and shall be fixed to the bottom of worktop surface with the help of screws. |
| 36 | Providing & Supplying CPU Trolley made of heavy Plastic of Black shade, with 35mm dia casters to provide mobility.The width of CPU shall be adjustable. |
| 37 | Three 3-drawer unit on levellors made of 0.8-2mm thick CRCA body andfascia duly powder coated of minimum thickness 45micron. The drawer unit shall consist of two drawers and one filing box mounted on roller slides on both sides. It shall be provided with central lock mechanism with keys and flush handles are to be providedin front to facilitate opening and closing of drawers. a) Three 3-drawer unit shall be of size 390mm (L)x450mm (D)x680mm(H) Model number EBBFA47 |
| 38 | b) Three 3-drawer unit shall be of size 455mm (L)x560mm (D)x680mm(H). |
| 39 | STORAGE CABINETS-Providing & Supplying hinged door Free standing cabinet units resting on floor having door, top, sides, back, & shelves in CRCA powder coated steel. The body and Shelves of the cabinets shall be made of 0.8-1mm CRCA steel.The top of the cabinets shall be made of 1.2mm thick CRCA steel and the skirting plate shall be made of 1mm CRCA steel. The cabinet shall be provided with Lever CAM Locks. The handles shall be PVC Moulded and shall be flush fitted. The cabinets shall be provided with 4 Nos. M10 levelers for height adjustment upto 10-15mm.The shutters shall have self-closing hinges. a) SIZE-600mm(L) x 450mm(D) x 1135mm(H) |
| 40 | Part D: Reception Counter Providing and installing at site the Reception Counter as per architectural drawing no. WD-54/3153 and as per the directions of the Engineer- in- Charge as detailed below:a) Providing and fixing 18 mm thickfactory pressed BWP grade marine ply as per IS 710 of approved brand in table, boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc.complete as per direction of Engineer-incharge b) Providing and fixing 1mm thick of Century laminate or Equivalent on wooden, plywood surface of approved quality and colour in required pattern including cutting, fixing with necessary adhesive, nails etc. as directed by Engineer in Charge.c) Providing and fixing 12mm Dupont corian sheets or Equivalent in any shape / pattern and as per approved drawing on wooden, plywood surface of approved quality and shade / colour including cutting, fixing with Dow Corning Silicon sealant 795 grade etc. as directed by Engineer in Charge.d) Providing and fixing 2nd class teak wood lipping18x6 mme) Providing and fixing 2nd class teak wood lipping 20 x 25 mmf) Providing and fixing 2nd class teak wood lipping 40x6 mm g) Providing and fixing stainless steel soft closing heavy type telescopic drawer channels 300mm Hettich Quadro or Equivalent (Set of 2) of approved make 300 mm long with screws etc. complete as per directions of Engineer- in-chargeh) Providing and fixing special quality approved cupboard or ward robe locks of size 50mm of M/s Hettich or equilalent of approved quality including necessary screws etc. complete.i) Providing and fixing good quality and approved handles, 100mm D Type Hettich or equilalent, with screws etc. complete: j) French spirit polishing , Two or more coats on new works including a coat of wood filler k) Providing and fixing Pinup board of approved material and quality as directed by Engineer in Charge. Rate is inclusive of fixing with necessary fixtures, screws etc. all inclusive. ( Armstrong cellotex or equivalent) l) Providing and fixing Jaquard cloth of approved quality and shade for fixing tightly on pinup board without any joint and as directed by Engineer in Charge. Rate is inclusive of fixing with necessary fixtures, screws etc. all inclusive.m) Providing and fixing Dupont Lippingat the edge of the table top with dow corning silicon sealant 765 grade as directed by the Engineer -in Charge (i) 40 x12 mm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
