Military Engineer Services-MES has published Tender For Addition Alteration To Or Institute Provision Of Aluminium Partition At Certain Places And Special Repairs To Bldg No 148 At 2003 Stn Under Ge Af Gurgaon. Submission Date for this Tender is 06-04-2024. Building Work Tenders in gurgaon Haryana. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 30-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 06-04-2024 |
| Sl. No. | Item Description |
| 1 | Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames)complete all as specified and as directed. |
| 2 | Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) complete all as specified and as directed. |
| 3 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint complete all as specified and as directed. |
| 4 | S&F 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkatscomplete all as specified and as directed. |
| 5 | M & L for preparation of new wood or wood based surfaces of any descriptionover 10 cm width or girth and applying two coats of synthetic enamelpaint over a coat of pink primer complete all as specified and as directed. |
| 6 | S&F Anodised aluminium powder coated frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 7 | S&F Anodised aluminium door shutters powder coated, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed. |
| 8 | S&F Anodised aluminium window and ventilator shutters powder coated, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed. |
| 9 | S & F plain sheet glass 5.5 mm thick tinted,fixed to aluminium doors/ windows / ventilators complete all as specified and as directed. (Note:- Beading/ rubber packing is included in the rates for aluminium sections above.) |
| 10 | S&F 100 mm long stainless steel Butt hinges, medium weight, cold rolledand fixed all as specified. |
| 11 | S&F 300 mm long mild steel, sliding door bolt withhasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified. |
| 12 | S&F aluminiumanodized barrel tower bolts 200 mm of extruded section and fixed complete all as specified and as directed. |
| 13 | S&F Mild steel barrel tower bolts 200 mm, stove enamelled black, with bright bolt and fixed complete all as specified and as directed. |
| 14 | S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI markedcomplete all as specified and as directed. |
| 15 | S&F 150 mm size Mild steel pressed handles, oval type, stove enamelled black, ISI markedcomplete all as specified and as directed. |
| 16 | S&FMortice lock, vertical type, size 100 mm 4 lever complete all as specified and as directed. |
| 17 | S&F aluminium die cast Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and as directed. |
| 18 | Supply & fix factory made solid panel PVC door frame of size 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet & edges to printed to match with printed sheet, reinforced with MS Square tube, complete all as specified and as directed. |
| 19 | S&F factory made solid PVC Moulded door shutters 28 to 30 mm thick (stile) with 2.4 or 6 raised panel design with but 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face fixing in frame at site as per specification & drawing complete all as specified and as directed. |
| 20 | Demolition of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles complete all as specified and as directed. |
| 21 | M&L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6)complete all as specified and as directed. |
| 22 | M&L for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls,built in CM (1:4) complete all as specified and as directed. |
| 23 | Taking down cement plaster on brick walls or stone walls any description etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 24 | M&L for Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed. |
| 25 | M&L for Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3)as in ceiling finished even and fair without using extra cement complete all as specified and as directed. |
| 26 | M&L for Rendering 20mm thick cement plaster on fair faces of stone masonry orbrick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cementcomplete all as specified and as directed. |
| 27 | M&L for Rough cast plaster on brick walls consisting under coat of cement and sand mortar 1:3 not less than 10mmm thick and while it is still in plastic state the rough cast mixture consisting of crushed stone or fine gravel mixed of size 6mm with coarse sand and cement in the ratio 1:1:1 shall be applied and finish even complete all as specified and as directed. |
| 28 | M&L for Preparation of new plastered surface of external wall and chajjasand making the surface smooth with sand paper andapplying two coat of acrylic emulsion paint(APEX) complete all as specified and as directed. |
| 29 | M&L for Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and applying two coat of oil emulsiondistemper complete all as specified and as directed. |
| 30 | M&L for three coats of white wash on surface of ceiling including preparation of new plastered surface complete all as specified and as directed. |
| 31 | M&L for Preparation of old surface after complete removal of existing treatmentapplying 3mm thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified and as directed. |
| 32 | M&L for two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as specified and as directed. |
| 33 | M&L for Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat ofacrylic emulsion (APEX)paint complete all as specified and as directed. |
| 34 | Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed. |
| 35 | M&L for Cement concrete type C-1, 1:3:6 (using 40mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and smooth complete all as specified and as directed. |
| 36 | M&L for 25 mm thick PCC ,type B-1 1:2:4(20 mm graded aggregate) in flooring complete all as specified and as directed. |
| 37 | M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debris from the premises complete all as specified and as directed. |
| 38 | M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tilesincluding 15mm screed bed or bedding layer CM1 : 6 complete all as specified and as directed. |
| 39 | M&L for vitrified tiles 10 mm thick (square/ rectangular) area of each tilenot exceeding 0.36 sqm,in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tilesincluding 15mm screed bed or bedding layer CM1 : 6 complete all as specified and as directed. |
| 40 | M & L for glazedcoloured (digital/printed/design) ceramic tiles in vertical surface 450 mm x 300 mm x 7mm thick 450 mm x 300 mm x 7mm thickorset and jointed in neat cement slurry and pointed incoloured cement to match the surface over and including 10 mm thick renderingin CM 1:4 complete all as specified and as directed. |
| 41 | M&L for 75 mm thick PCC ,type B-1 1:4:8(40 mm graded aggregate) in flooring complete all as specified and as directed. |
| 42 | M&L for cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified and as directed. |
| 43 | Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed. |
| 44 | M&L for 20 mm thick Granite (of any type) work (table rubbed & polished) in steps, jambs, pillars, window-cills cooking platforms & like in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite over 15 mm thick cement screed/renderingin CM 1:4 including Roughening surfaces of old/newconcrete floor/wall by picking,sweeping clean and washing down with water to remove dust etc and brusing neat cement slurry with 3.00 kg per sqm complete all as specified and as directed. |
| 45 | Round chamfering,to the edgesof graniten.exc 15mm wide on granite stone shelves complete all as specified and as directed. |
| 46 | Taking up or down steel water tubing and connections including removal from site bore of pipe 15mm bore dia complete all as specified and as directed. |
| 47 | Taking up or down steel water tubing and connections including removal from site bore of pipe 20mm bore dia complete all as specified and as directed. |
| 48 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and as directed. |
| 49 | M&L for cutting chases with diamond cutter pinning in stone masonary and making good to facing where required and pointing in cement and making good in CM 1:3 cutting n.exc. 10 cm in girth complete all as specified and as directed. |
| 50 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc complete all as specified and as directed. |
| 51 | S&F in repairBib taps for 15 mm bore pipe, cast copper alloy fancy type chromium plated fixed in repairs complete all as specified and as directed. |
| 52 | S & Fin repairs Vitreous china wash basin counter top oval type , white flat back,size 550 x 400 mm including waste pipe , brackets and cutting for and pinning in ends of brackets or errecting standand 32 mm diaPVC waste pipefixed in repair including waste copling 32mm size full thread ,complete all as specified and as directed. |
| 53 | S&F 15mm bore pillar cock fancy type, screwed down high pressure with or without letters hot or cold with long screwed shank and fly nuts screwed for iron pipe ISI marked add if fixed in repairs complete all as specified and as directed. |
| 54 | S&F Liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105 gms) complete all as specified and as directed. |
| 55 | S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 56 | S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white, complete including fixing to trap, Incl Supply and fixing of PVC seat and cover for pedestal pan including all joints and making good the floor complete all as specified and as directed. |
| 57 | S&F in repair Health faucet (with 1.50 mtr tube) fixed to EWC and Angular Stop Cock complete all as specified and as directed. |
| 58 | S&F in repair PVC flushing cistern 10 ltr capacity incl PVC connection inlet and and outletconnections,brackets, PVC flush pipe with bend 32 mm dia of suitable length including making necessary connections to water supply pipe line and jointing to WC complete all as specified and as directed. |
| 59 | S&F in repair Vitreous china bowl urinal flat back, size of 465 x 355 x265 mm white (minimum ),with grating and union for discharge pipe (excluding flushing cistern and flush pipe and waste pipe )complete including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; complete all as specified and as directed. |
| 60 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed. |
| 61 | Dismantling water tanks and removing to store complete all as specified and as directed. |
| 62 | S&F Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 20mm dia ball brass valve high pressure with polythene float and dismantling of existing PVC tank of any capacity complete all as specified and as directed. |
| 63 | S&F in repair 15 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 15 mm bore complete all as specified and as directed. |
| 64 | S&F in repair 20 mm size gun metal globe or gate valves with iron wheel head, screwed both endsfor iron pipe and fixedcast copper chromium plated fancy type alloy ISI marked with crutch or butter fly handles screwed down screwed for iron pipe of 20mm bore complete all as specified and as directed. |
| 65 | S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints complete all as specified and as directed. |
| 66 | S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured) complete all as specified and as directed. |
| 67 | S&F in repair CI floor trap 100 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and as directed. |
| 68 | S&F in repair CI floor trap 75 mm with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 with CP grating with ot without hole for waste pipe complete all as specified and as directed. |
| 69 | Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for complete all as specified and as directed. |
| 70 | M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.5 mm padding as roof , surface finished even and smooth without using extra cement complete all as specified and as directed. |
| 71 | Taking down carefully existing bitumen tarfelt including plaster and roughning the surface cleaning the surface and removing of the rubbish to a distance exceeding 500m but not exc 1.50 Km and depositing where directed complete all as specified and as directed. |
| 72 | M&L for 15mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and as directed. |
| 73 | M&L for applying 3 coats of elastomeri liquid membrane of home shield PU roof coat of Berger, Asian or equivalent make as approved by Engr-In-Charge as in roof complete all as specified and as directed by an approved applicator complete all as specified and as directed. Note : Authorised applicator is to be approved by GE. |
| 74 | Supply only liquid water proofing chemical complete all as specified and as directed. |
| 75 | Dismantling posts or struts (wood, steel or RCC) anyany sectionincluding taking out embedded portion and making good disturbed ground complete all as specified and as directed. |
| 76 | Dismantling of fencing wire mesh anytype complete all as specified and as directed. |
| 77 | Excavation in trenches n.exc 1.50mtr wide and 1.50mtr in depth for foundation etc or for shafts, wells cessipts, manhole etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr deth and getting out in soft /loose soil etc complete all as specified and as directed. |
| 78 | M&L for brick work with sub class "B" brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:4 etc complete all as specified and as directed. |
| 79 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed. |
| 80 | Returning filling in, with soil inlcuidng spreading, levelling,watering and well ramming in layers not exc 25 cm thicks etc complete all as specified and as directed. |
| 81 | Removing excavated soil/ building material/debries to a distance exc 250 mtr but not exceeding 500 mtr and depositing where directed etc complete all as specified and as directed. |
| 82 | M&L for rendering 15 mm thick in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed. |
| 83 | M & L for prepring new plaster surface and applying two coat of cement base paint on wall surface complete all as specified and as directed. |
| 84 | S&F Framed work as in doors or gates of angle Fe-410-W(Gde- E-250) quality-Bor other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed. |
| 85 | Excavating in post holes (or similar holes ) each n. exc. 0.5 cum & getting out in any type soil & removing soil to distance n.exc. 50 m. & making good surface complete all as specified and as directed. |
| 86 | M & L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed. |
| 87 | M & L for PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation complete all as specified and as directed. |
| 88 | S & F mild steel angle in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 89 | S & F MS screw bolts (Machine made)with hexagonal or square heads at one end and the screwed the other end to be fitted with washers and one hexagonal or square nut exc 5 cm but not exc 10cm long diaof shank 5 to 10mm complete all as specified and as directed. |
| 90 | Supply only chain link fencing with knucklingmade out of 3.8mm to 4mm dia, galvanised MS wire,size of mesh 50mm x 50mm complete all as specified and as directed. |
| 91 | Fixing only chain link fencing of wire mesh size 50mmx50mm including line wires and type of standrad tails straining bolt etc including provison of binding wire complete all as specified and as directed. |
| 92 | M & Lfor Mild steel round bar 10mm dia and over, cut to length, bent to shape required, including cranking Fe-410-W(Gde.E-250) quality-A or Fe 290(Gde -E-165) as in strengthning bars complete all as specified and as directed. |
| 93 | M & L for preparation of new steel surfaces of any description not exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 94 | M & L for preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibedand applying two coats of synthetic enamell paint over a coat of red oxide complete all as specified and as directed. |
| 95 | S&F 12 mm PVC board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and as directed. |
| 96 | S&F for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 97 | S&F Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed. |
| 98 | S&F of aliminium anodized powder coated window double shutter glazed and guaged of stainless steel wire cloth having nominal dia of wire cloth having nominal dia of wire 0.36 and avg width of aperture1.40 mm along with aluminium section with 50 mm micron anodizing size of frame 125x44.5x6 mm gauge having size of shutter top/bottom/central rail shall be 44.5 x44.5x16 gauhe aluminium section with 50 micron anodizing and 5.5 mm thick black, tinted steel glass to be fixed on glazed portion including aluminium grill and stainless steel hoooks and eye to be provided as stay of shutters etc complete including necessary jointing, cleats, clips, rubber packing, aluminium fittings such as peg stay 150 mm long 1 no each leaf, hinge type B-21 of 100 mm long ( 02 no each leaf) and 100 aluminium tower bolts ( 02 no each leaf) complete all as specified and as directed. Note : cost of black/tinted sheet glass, stainless steel wire cloth, jointing and packing materials, anodized aluminium fitting etc shall be included in quoted rate |
| 99 | S&F in repairs Factory made solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall becovered with heat moulded wood grain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottim rail.Penelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed. |
| 100 | M&L for Machine cut kota stone in flooring 20-25 mm thick (Pre-mirror polished), over and incl 20 mm thick cement screed base in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the floor including rubbing and polishing complete and moulding at edge if reqd complete all as specified and as directed. |
| 101 | M&L for 20-25 mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles,complete all as specified and as directed. |
| 102 | S&F Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and pigment with screed bed flooring, M-35 Grade complete all as specified and as directed. |
| 103 | S&F in vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and as directed. |
| 104 | S&F in repairs Steel rolling shutters, with out ball bearing with thickness of lath 1.25 mm, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: gear operated type with bevel gear box and crank handle complete all as specified and as directed. |
| 105 | S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed. |
| 106 | S&F ball bearing for rolling shutter complete all as specified and as directed. |
| 107 | Demolition of reinforced cement concrete (Reinforcement cut as required to facilitate demolition) in ground floors (below or above ground level) not exceeding 15cm thickness complete all as specified and as directed. |
| 108 | Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortarfor dia. of pipe 150mm complete all as specified and as directed. |
| 109 | M & L for cement concrete 1 : 4 : 8 type D-2 using 40mm graded stone aggregate, as in bed to drain pipes forbore of pipe 150mm dia. including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed. |
| 110 | M & L for Salt glazed stoneware drain pipes grade "AA" forinternal diameter pipe 150mm dia. laid in trenches and jointed complete all as specified and as directed. |
| 111 | M & L for providing cement concrete 1 : 2 : 4 type B-1, using 20mm graded stone aggregate as in channeling, benching &copings,and the like including weathering, slightly rounded or chamfered angles and throating, with necessary form work as required complete all as specified and as directed. |
| 112 | M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 withwater proofing compound @ 3% by weight of cement finished even & fair without using extra cement all as directed. (Note:- WPC shall be measured and paid separately under relevant items of this schedule) |
| 113 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and as directed |
| 114 | M & L for providing precast cement concrete type B-1, 1:2:4 using 20mm graded stone aggregate in landings, cover slabs (for manholes etc) and similar small articles with plain fair surfaces,and set in cement mortar 1:4.Completed all as specified and as directed. |
| 115 | M & L for reinforcement of TMT bars 10 mm dia and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. |
| 116 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required (internal dia of pipe 150mm) complete all as specified and as directed. |
| 117 | S&F Framed mild steel work as in gates, grill, gratingincluding pintel hinges, stops, hand made sliding bolts etc.with any type of forging, riveting, welding etc complete conforming to Fe-410-0 or Fe-310-0 complete all as specified and as directed. |
| 118 | Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and as directed. |
| 119 | Taking down unserviceable / serviciable MCBDB"s/AC"s boxto deposit in store for keeping in safe custody for reuse or takeing in schedule of credit of any size/rating complete all as specified and as directed. |
| 120 | M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and includingPVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover/modular white cover plate with frame as required module and modular metal flux box as required module at site for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed,1100 V grade cable multi stranded copper conductor of size 1.5 sqmm complete all as specified and as directed for the following:- |
| 121 | One light/fan point control by one switch. |
| 122 | One 3 pin 5 amps socket outlet on the same board with other switches. |
| 123 | One 3 pin socket outlet, 5 Amps independent. |
| 124 | All as per item No 120 here in before but with cable size 2.5 Sq mm for one 3/5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm complete all as specified and as directed. |
| 125 | S&F in replacement of switch piano, flush type, 5 Amps, single pole, one way complete all as specified and as directed. |
| 126 | S&F in replacement of switch piano, flush type, 15 amps, single pole, one way complete all as specified and as directed. |
| 127 | S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type complete all as specified and as directed. |
| 128 | S&F in replacement ofsocket outlet 2in1, 6 pin 15/5 Amps flush type complete all as specified and as directed. |
| 129 | S&F in replacement of ceiling rose surface bakelite two to three terminals complete all as specified and as directed. |
| 130 | S&F LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. |
| 131 | M&L for sub main wiring with 2 Run of 6 Sqmm cable and one run of 4 sqmmPVC insulated, unsheathed FR cable of multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 25 mm dia) along with fittings and accessories concealed on wall and surface on ceiling complete all as specified and as directed. |
| 132 | S&F LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics completewith IP 65/66 protection complete all as specified and as directed. |
| 133 | S&F in replaceent of MCB DB sheet metal enclosure single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricatedAcrylic double door complete confirming to IP 43 without MCB and with enclosure blank plates for unusedway suitable for 8 way complete all as specified and as directed. |
| 134 | S&F MCB, single pole & neutral, 240 Volts ( 40-63) Amps,10KA, "B" series complete all as specified and as directed. |
| 135 | S&F MCB, single pole, 240 Volts (05 to 32) Amps,10KA, "B" series complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
