Greater Noida Industrial Development Authority-GNIDA has published Tender For Repairing And Painting Of Shopping Centre In Sector Beta-I, Greater Noida.. Submission Date for this Tender is 18-03-2024. Building Repair Tenders in noida Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | BOQ |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead., DAR-18/15.56/AR |
| 3 | Cement concrete with 4cm gauge approved stone ballast, coarse sand & cement in the proportion of 8.4.1 including supply of all materials, labour, tools & plants etc. required for proper completion of the work. (UPPWD/SOR-2020/281) |
| 4 | M-150 Brick Work in 1:4 one cement & four coarse sent 2.20 F.M. mortar in foundation and plinth including supply of all materials, labour and T&P etc. requried for proper completion of the work., (UPPWD/SOR-2020/305(a)) |
| 5 | M-150 brick work in 1:4 one cement and four coarse sand 2.20 F.M. mortarincluding supply of all material, labour, T&P etc. required for proper completion of the work. But in superstructure including necessary Cutting & moulding of brick as required thickness of walls not to be less than 1½ brick. Add extra labour to above items. (UPPWD/SOR-2020/309) |
| 6 | 12 mm cement plaster of mix :, 1:6 (1 cement: 4 coarse sand) , DSR-2018/13.4.1/AR) |
| 7 | 15 mm cement plaster on rough side of single or half brick wall of mix : , 1:4 (1 cement: 4 coarse sand) , DAR-2018/13.5.1/AR) |
| 8 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (DSR-2018/13.91/AR) |
| 9 | Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters andalso including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour,Tools & plants etc.required for proper completion of the work. (UPPWD/SOR-2020/649) |
| 10 | As item above but for every coat after the first coat |
| 11 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 12 | 110 mm diameter, DAR-18/12.41.2/AR |
| 13 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : |
| 14 | For 100 mm dia pipe, DAR-18/17.37.1/AR |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete., DAR-2018/11.36/AR |
| 16 | Kota stone slab flooring over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of 1:4 cement mortar 1:4 (1 cement : 4 coarse sand). |
| 17 | 25mm thick. (DSR-18/11.26.1/ AR) |
| 18 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1) cement: 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. |
| 19 | Raj Nagar Plain white marble/Udaipur green marble/Zebra black marble. Area of slab upto 0.50 Sqm. (DSR- 2018/8.2.1.1/AR) |
| 20 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 21 | 35mm thick including ISI marked stainless steel butt hinges with necessary screws. (DSR-2018/9.21.1AR) |
| 22 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore (DAR.18.50.1) |
| 23 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 24 | Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm), DSR-2018/14.5.2/AR |
| 25 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 26 | 30 cm length, 15 mm nominal bore, DAR-18/18.21.1.1/AR |
| 27 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931: 15mm nominal bore, DAR-18/18.53.1/AR |
| 28 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 29 | 10 litre capacity - White DSR-18/Item Code: 17.18.1 |
| 30 | Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushing cistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: |
| 31 | White vitreous china dual purpose WC pan with white solid plastic seat and lid with white vitreous china flushing cistern and C.P. flush bend., DAR-18/17.68.1 /AR |
| 32 | Supply and fixing S.F.R.C Cover over chamber With frame 50mm thick 600X600mm medium duty |
| 33 | Steel work welded in built up sections framed work including cutting, hoisting ,fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 34 | in gratings,frames,guard bar, ladder, railings, brackets, gates and similar works,(sail steel) (DSR-2018/10.25.2/AR) |
| 35 | Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge (Note :- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/recoverable separately All works above plinth level upto floor V level. |
| 36 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. |
| 37 | Thermo-Mechanically Treated bars of grade Fe-500D or more./Cold twisted bars. (Sail Steel) (DSR-2018/5.22.6/AR) |
| 38 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.DSR-13/18.7 Internal work - Exposed on wall: |
| 39 | 20 mm nominal outer dia Pipes (DSR-18/18.7.2/ AR) |
| 40 | 25 mm nominal outer dia Pipes (DSR-18/18.7.3/ AR) |
| 41 | 32 mm nominal outer dia Pipes (DSR-18/18.7.4/ AR) |
| 42 | 40 mm nominal outer dia Pipes (DSR-18/18.7.5/ AR) |
| 43 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc., Internal work - Exposed on wall. |
| 44 | 25 mm dia nominal bore, DAR-18/18.10.3/ AR |
| 45 | Providing and fixing brass bib cock of approved quality : |
| 46 | 15 mm nominal bore, DAR-18/18.15.1 /AR |
| 47 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank., DSR-18/18.48/AR |
| 48 | Providing and fixing wash basin with C.I./M.S brackets, 15 mm C.P. brass pillar taps, Kingston./Gem/Techono/Parko, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: A] White Vitreous China |
| 49 | Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps DSR-18/Item Code: 17.7.1 |
| 50 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: |
| 51 | Semi rigid pipe, 32 mm dia (DSR-18/17.28.1.1/AR) |
| 52 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: |
| 53 | White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests, DSR-18/17.1.1/AR |
| 54 | Providing and laying 60mm thick I.S.I. mark factory made cement concrete interlocking concrete paver block made by block making machine with strong vibratory compaction of approved size, design, shape, laid in required colour and pattern over and including average 50mm thick compacted bed coarse sand and filling the joints with fine sand all complete as per the direction of Engineer-in-charge with conforming to IS-15658 and IRC:SP:63. (AR/GNIDA) |
| 55 | finishing walls with premium acrylic smooth exterior paint with silicone additives of required shade: new work (two or more coats applied@1.43 ltr/10 sqm over and including priming coat of exterior primer applied @2.20 kg/10 sqm DSR 18/13.47.1 |
| 56 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete. D.S.R./18/Item Code: 11.37 |
| 57 | Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.As in item (647) above but for every subsequent coat on previously treated surface SOR-647+648 |
| 58 | Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. (SOR) |
| 59 | Labour Cess will be paid extra as per applicable |
| 60 | GST will be paid extra as per applicable |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
