National Hydroelectric Power Corporation Limited has published Tender For Construction Of Mid-Day Meal Kitchen With Dinning Hall And Extension Of Play Ground With Gallery At Legship, Govt. Jr. High School, South Sikkim. Submission Date for this Tender is 29-04-2024. Building Work Tenders in rangit Sikkim. Bidders can get complete Tender details and download the document.
Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
1 | 29-Mar-2024 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-04-2024 |
2 | 13-Apr-2024 | Corrigendum-1 | Date | 29-04-2024 |
Sl. No. | Item Description |
1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar |
2 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar. |
3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :Of area 3 sq. metres and below. |
4 | Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:Channels, angles, tees and flats |
5 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:G.S. Sheet |
6 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
7 | Excavation in Hill Area in Soil by Mechanical Means in Excavation in soil in hilly area by mechanical means including cutting and trimming of side slopes and disposing of excavated earth with all lifts and lead upto 1000 metres. |
8 | Providing and laying hand packed stone soling in buildings works with clean hard selected stones, all complete. (Manual |
9 | Providing and Laying Random Rubble Stone Masonry wall with hammer dressed with bond stone, through stone of size 150mm x 150mm x 450mm manufactured in 1:4:8 (1cement, 4 clean coarse sand, 8 clean hard stone aggregate of size 40 mm and down) clean hard selected stone, including centering aligning and slopes/curves etc, complete as per the direction of Engineer in Charge |
10 | Providing and laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix. (1 cement, 2 coarse and, 4 graded stone aggregate of 20mm & down size) including compacting curing etc |
11 | Providing and Laying first class brick work in one brick thick in superstructure of standard size bricks with 1:5 cement mortar (1cement and 5 clean coarse sand) as per the direction of Engineer in Charge including curing etc all complete |
12 | Providing and laying first class brick work in half brick thick in superstructure of standard size bricks with 1:4 cement mortar (1 cement and 4 course sand) including carriage of bricks up to work site, curing etc all complete. |
13 | REINFORCED CEMENT CONCRETE CAST IN SITU Providing and Laying in position specified grade of reinforced cement concrete excluding the cost of form work, finishing and reinforcements.1:1.5:3 Mix (1cement, 1.5 coarse sand 3 graded stone aggregate 20mm and down nominal gauge) |
14 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Foundation, footings, base of column etc for mass concrete |
15 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Beam, lintels, girders, brersumers and cantilevers. |
16 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Floor slab, roof slab, landing, balcony and access platform. |
17 | Providing, fixing & removing form work for casting R.C.C items as indicated below: with locally available timber) Square Columns |
18 | Supplying, bending and placing in position tor steel reinforcement in all R.C.C works including cost of binding wires, all complete |
19 | Providing and Laying 20mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.(1:4 mix) |
20 | Providing and Laying 15mm thick cement plaster of specified mix in single coat including finishing even and smooth and curing etc all complete.(1:4 mix) |
21 | Providing and Laying of 18mm thick 30 cm height cement plaster skirting with cement mortar 1:3 (1cement,3coarse sand) finished with a floating coat of neat cement including rounding of junctions and curing complete. |
22 | Distempering with dry distemper on New surface two or more coats of required shade to give an even and uniform shade including priming coat of whiting to give an even shade after thorough cleaning of dirt, dust, loose pieces of scabs, grease etc including surface preparation by sand papering etc complete. New surface |
23 | Wrought Iron and Mild Steel Welded Work (Wrought iron and mild steel welded work) (using angles, square bars, tees and channel grills, grating frames, gates and tree guards of any size and design etc. including cost of screens and welding rods or bolts and nuts complete fixed in position but without the cost of excavation and concrete for fixing which will be paid separately) |
24 | Providing fitting and fixing in position of fully paneled shutters in windows and doors of champ timber or equivalent including steel butt hinges screws 12mm thick panels etc complete.32mm thick panel door |
25 | Providing, fitting and fixing. Tower bolt 100x10mm with necessary screw etc complete, M.S. |
26 | Providing, fitting and fixing. handles 100mm size with necessary screws etc. complete., M.S. |
27 | Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete. MS 250x16mm Size. M.S (Oxidized) |
28 | Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete. |
29 | Providing and applying priming coat with ready mixed Red oxide, Zinc chromate primer on steel / galvanized Iron steel works including preparation of the surface complete. |
30 | Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. |
31 | P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required.610 x 450 x 200 mm. |
32 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall |
33 | Providing, Fitting and fixing brass fittings of pproved quality and size complete: STOP COCK 15 MM DIA |
34 | Providing, Fitting and fixing brass fittings of approved quality and size complete: BIB COCK 15 MM DIA. |
35 | Providing and Laying Plum concrete in 1:4:8 c.c. (1cement, 4 coarse sand, 8 clean hard graded stone chips of 40 mm down nominal gauge) with 70% clean hard stone of sizes not exceeding 15cm including shuttering, compacting and curing complete, as per the direction of Engineer in Charge. |
36 | Loading and Unloading of Cement or Steel by Manual Means and stacking. |
37 | Loading and unloading of stone boulder/stone aggregates/sand/ kanker/moorum. |
38 | Cost of haulage excluding loading and unloading- Surfaced road). |
39 | LED Tube Lights Batten Confirming to IS: 16102 Led Tube Light Neptune Silver 20 Watt. |
40 | Electronic fan regulator(EME) Deluxe 120/280 V |
41 | LED LAMPS CONFORMING TO IS: 16102 LED Lamp 9 watt. |
42 | Ceiling Fan 1200mm 48" (Havells/USHA) Conforming to IS: 374 |
43 | Ventilating fans 250mm 10" (Havells) |
44 | 2 mtrs long safe earthing with T 19 electrode with outer dia of 50mm & 1 bag back fill chemical compound |
45 | G.I. strips 20mm X 4mm G.I. earth electrode |
46 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
47 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
48 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.5/6 amps switch. |
49 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 3 pin 5/6 A socket outlet |
50 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.15/16 A switch. |
51 | Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required. 6 pin 15/16 A socket outlet. |
52 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required 180 mm X 100 mm X 60 mm deep |
53 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole. |
54 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 Way Double Door |
55 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 A |
56 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
57 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. |
58 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
59 | Supplying and fixing brass batten/ angle holder including connection etc. as required. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail