Rural Development And Panchayats Department has published Tender For Construction Of Annexure Building (Type 2) For Village Library At Puliyamarathukkottai House Of Puliyamarathukkottai.. Submission Date for this Tender is 11-03-2024. Building Work Tenders in oddanchatram Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | 1. Construction ofAnnexure building (Type 2) for Village Library at PuliyamarathukkottaiH/O Puliyamarathukkottai . Estimate Amount Rs.22.00 Lakhs |
| 2 | Earth work excavation for foundation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by thedepartmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. |
| 3 | Supplying and filling in foundation, basement, etc with filling M.Sand in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Cement Concrete 1:4:8 (One Cement, Four sand and Eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundationincluding dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification |
| 5 | Supplying and filling inbasement with U.S.Gravel in layers of not more than 15cm thick well rammed,watered and compacted including cost & conveyance of sand and all labour charges etc., complete as per std. Specifications. |
| 6 | Brick work in Cement Mortar1:5 (one cement and five sand) using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4"for foundation and basement including curing, etc., complete complying with standard specifiction. |
| 7 | Up to Basement |
| 8 | Ground floor |
| 9 | Brick Partition wall Cement Mortar 1:3 mix, using best quality of country bricks of size 8-3/4" x 4-1/4" x 2-1/4"including curing, etc., complete complying with standard specifiction. |
| 10 | Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton |
| 11 | Below Ground level |
| 12 | Above ground level |
| 13 | Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. |
| 14 | Reinforced Cement Concrete 1:1.5:3 (One Cement, One and a half sand and Three hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc.and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers |
| 15 | Up to Basement |
| 16 | Ground floor |
| 17 | Special ceiling Plastering with cement mortar 1:3 mix to 10mm thick including cost and conveyance of all materials & all labour charges etc., complete. |
| 18 | Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 19 | Providing weathering course with best quality of broken jelly of size 20mm uniform gauge in pure slacked lime (no sand to be used) over the roof slab in the proportion of brickjelly lime 32:121/2 by volume and laid over in a single layer and consolidated |
| 20 | Finishing the top of roof with one course of machine pressed tiles of size 200mm x 200mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers |
| 21 | Paving the floor with Cement Based Hydraulically Pressed Anti skid Tiles(Pattern Design) - 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 22 | Dadooing wall with Glazed tiles of any colour of any size laid in C.M 1:2 mix 20 mm thick & pointing with colour cement using 0.40kg per sq.m including cost & conveyance of all materials to site and all labour charges etc.complete |
| 23 | Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise andsimilar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., ., complete as per standard speicification. |
| 24 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 25 | White washing two coats with freshly burnt white shell lime in all floors including cost of lime, blue powder fevicol type gum, brushes, scaffolding charges, etc., complete complying with standard specification and as directed by the departmental officers. |
| 26 | Supplying and painting the walls with two coats of Oil bound distemper over one coat of water based cement primer including cost for distemper, primer, cleaning and scrapping the walls, rendering the wallssmooth with necessary putty, brushes, scaffolding arrangements, labour charges, etc., as per standard specification. |
| 27 | Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 28 | Painting two coats with enamel paint over new iron work including cost & conveyance of all materials to site and all labour charges etc., complete. |
| 29 | Supplying and fixing of 110mm dia PVC pipein position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification. |
| 30 | Door, Windows and Ventilators |
| 31 | Supply and fixing of Stainless steel (Salem stainless steel) Door frame ( Box section using stainless steel plate of 1.6mm thick) of size 100mm X 60mm with a rebate of 30 / 35mm X 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel holdfast etc. |
| 32 | Supplying & fixingdoor shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive ofthreee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc.,complete |
| 33 | Solid PVC Door Shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC Sheets. Shutter using 5mm thick solid PVC Sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm with suitable rabate for housing the shutter |
| 34 | UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 35 | UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work |
| 36 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. |
| 37 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete |
| 38 | Sanitary arrangements |
| 39 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting |
| 40 | Supplyingandfixing position CI Nahani Trap/Floor Trap of the followingsizeswith beststainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (Onepartoflime,two partofSand andfive part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three Sand)including dismantling masonry workswhereverfound necessaryandmaking good thedismantled portionstotheoriginal condition and giving connectiontotheCI/PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works) |
| 41 | Provision for Electrification |
| 42 | Earthing as per ISI Specification with an earth electrode of 2.1mt class "B" GI pipe of Dia not less than 40mm and with 20mm Dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoat, common salt, G.I.reducer, check nuts etc.,and mansonry workhand providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers. (SD 234) |
| 43 | Supplying and run off 8 SWG copper wire on walls or below ground level with necessary "U" nails, earth work excavation and refilling & including the cost of all materials etc., complete in all respects as directed by the departmental officers.(SD75) |
| 44 | Supplying and Fixing of 3 Phase DB with MCB 12way TPMCB sheet steel distribution boards (flush type/surface type) fitted with bus bars and neutral links with three phase MCB outgoings and separate 4 way provision for accommodating One No. 4 pile incoming MCB / Isolator and another separate 4 way provision for accommodating One No. 4 pole ELCB / RCD (totally 8 ways in one segment) (3 x4 ways in each segment) and separate provisions for MCB/Isolator (totally 12 Nos.) for sub incomers in 3 segments with label holder etc.complete in all respects as directed by the departmental officers( SD No 179) |
| 45 | Supply and run off 2 of 2.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continuousearth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wallfor mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. (derived from SD 55) |
| 46 | Supply and run off 2 of 1.5 sqmm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continiousearth connection by means of1.50 sqmm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wallfor mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departemental officers. (derived from SD 54) |
| 47 | Supply and fixing of TNEB meter Board suitable for 32 A Three phase service connection with 32A fuse unit(500V)32A neutral link and earth link (1" x 1/8" Copper flat) on T.W plank of size 600mm x450mm x 19mm with supportingT.W.reepers of 1" thick oneither sider with painting withsuitable bolt and nuts for fixingthe TW plank on wall withearth connection and interconnection with 7/20 PVCinsulated copper wire from EB meter to fuse unit. SD 127) |
| 48 | Supply and run of 4 core 16 Sq.mm PVC Armoured cable of 1100VgradewithISI mark.(PWD SOR PG no 125) |
| 49 | Supply and run of 4 core 10 Sq.mm PVC Armoured cable of 1100VgradewithISI |
| 50 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC Concelaed light point / Fan point (For Electronic regulator). SD 23 |
| 51 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for 5A 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour for concealed PVC plug point. SD 38 |
| 52 | 18W LED 3000K Round Type Recessed Fitting with LED |
| 53 | Supply and fixing of 1200mm (48") sweep AC ceiling fan complete with stepped electronic regulator with 300mm down rodon the existing clamp (SD110) |
| 54 | Supply and fixing of 400mm Sweep-wall mount fan |
| 55 | Supplying and fixing in positionbestquality P.V.C soil/ waste pipes (6KSC) of various sizes having ISI mark and providingleakproof joints including fixing to the wall with P.V.C/ M.Sclampsetc.,and making connection to all sanitary fittings, dismandling masonry/R.C.C.works wherevernecessary andmakinggoodthe dismandledportionto the original condition, complying with standard specifications.(D) |
| 56 | Provision for Water supply arrangements etc., |
| 57 | Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve withBISmakeof the following dia includingcostofshellac, thread balls, etc., complete complying with standardspecifications (forbothinternaland external water supply arrangements).The valves to be used on work shallbegotapprovedby theExecutiveEngineer before use on work. |
| 58 | 25mm Gun metal Gate Valve |
| 59 | 40mm Gun metal Gate Valve |
| 60 | Supplying and fixing in position 15mm dia brassCPscrewdown tap/Pillartap(heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac,thread,etc., complete complying with standard specification and including cutting and threadingwherever necessary.(Taps should be got approved by the Executive Engineer before use on the works) |
| 61 | SD Tap |
| 62 | Pillar Tap |
| 63 | Water Supply arrangements |
| 64 | Supplyanddelivery and fixing of HDPE tank as per IS 12701 / 1996including loading,unloading, transportationand labour charges for fixingoftheGIpipes andspecialsforpipe connection works including cutting, threadingandfixing charges etc., |
| 65 | Internal Water Supply Arrangements using PVC pipes and PVC specials Supplying, laying and jointing PVCpipes (havingworkingpressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threadingandfixingPVC specialsusingPVC adhesives(butexcluding cost of such specials) and fixingintowallwithteak woodplugs,PVCclamps andscrewsmakingholes onthewall(or)drilling holes in the roof and making good the dismantled portion to originalconditionwith necessary brick work / cement concrete and plasteringneatly wherevernecessarywith necessary scaffolding charges, etc., complete complyingwithstandard specifications. ThePVC pipesshallbegot approvedbyExecutive Engineer before use on works. |
| 66 | 25mm dia PVC Pipe |
| 67 | 32mm dia PVC Pipe |
| 68 | SupplyingPVCSpecials (with working pressure 10 kg. / sq.cm.) in water supplyarrangements (bothininternaland external water supply arrangements |
| 69 | 25mm PVC coupler |
| 70 | 32mm PVC coupler |
| 71 | 25mm PVC elbow |
| 72 | 32mm PVC elbow |
| 73 | 25mm PVC Bend |
| 74 | 32mm PVC Bend |
| 75 | 25mm PVC Tee |
| 76 | 32mm PVC Tee |
| 77 | 25mm PVC end cap |
| 78 | 32mm PVC end cap |
| 79 | 25 mm x 20 mm PVC Reducer |
| 80 | 32 mm x 25 mm PVC Reducer |
| 81 | 25 mm x 20 mm PVCReducer Tee |
| 82 | 32 mm x 25 mm PVC Reducer Tee |
| 83 | 25 mm x 20 mm PVC Reducer Elbow |
| 84 | 32 mm x 25 mm PVC Reducer Elbow |
| 85 | 25mm Pipe Jet Nipple |
| 86 | 32mm Pipe Jet Nipple |
| 87 | Supplying and fixing in position15mm dia C.P.Showerrose&stop cockofapprovedmake confirming toIS specifications andquality includingcostof Shellac thread etc. complying with standard specification. |
| 88 | C.P. Shower Rose |
| 89 | Stop Cock |
| 90 | Supplying and fixing in position C.P.Towelrail 600mmlongand20mm dia with brackets of same materials including cost of teak wood plug and C.P.Screws etc. complete complying with standard specification. |
| 91 | Supplying and fixing in positionC.P. Soap tray of size 150 x150mm includingcostof teak wood plug and C.P.screws. etc. complete complyingwithstandard specification. |
| 92 | Supplyanddeliveryof Electric Monoset centrifugal pump conforming to IS9079:2002 asamendedfromtime totime,withCIFG200 Casing, hydraulically anddynamically balanced BronzegradeLTB-2 impeller ,impeller ring andcasing ring,stainlesss teel shaft capable of dischargingrequired quantity of water against a total head notedbelowduetoall causes.Pump shall of BEE 3 StarRatedand capableofdischarging the specified quantity at theheadnotedat theminimum NPSHA at sit conditions. The shut off head shall beat least 25% overandabove the head at duty point.The pump shall be suitable for operation in A Cthreephase,415V+/- 10%,50Hz+/-5%. Squirrel cage induction motor for continuous operation.The speed of the Pump and Motor shallbenotlessthan 2700to2900 RPM respectively.(250x20) TWAD SOR Pg 95 |
| 93 | Providing rain water harvesting using 3 No.of RCC well rings of 90cm inner dia (clear) with 5cm wall thickness made out of cement concrete 1:2:4 using 20mm hard broken jelly to a height of 30cm each No. of 6mm dia MS rod vertically and 3 No. of 6mm dia MS rod cumferentially tied together with 18 guage binding wire for well rings including necessary arth work excavation 1m dia to a depth of 1m, supplying and filling 40mm HBG inside the erected well ring to a depth of 90cm, and top covered with RCC circular perforated cover slab of 1m dia and 5cm thick which inclusive of cost and fabrication of 6mm M.S reinforcement at 15 cm spacings on both directions and one 6mm M.S rod ties at the edge of the slab circumferentially including cost of moulding, curing, finishing and well placing in position and disposing off excavated earth with all initial leads and lifts in places as shown by the Departmental officers etc., complete in all respects. |
| 94 | Provision forName Board with work detailsincluding cost and conveyance and all labour charges etc.,complete |
| 95 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package} |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
