Completion Of Works Under Full Deposit (Jhatpat Portal, Nivesh Mitra And Line Shifting Works Under Full Deposit Scheme) In The Area Of Edsd-Ii, Kithore Under Edd-Iv, Meerut., meerut-Uttar Pradesh

Completion Of Works Under Full Deposit ( Jhatpat Portal, Nivesh Mitra And Line Shifting Works Under Full Deposit Scheme ) In The Area Of Edsd-Ii, Kithore Under Edd-Iv, Meerut.- 1 Carriage Of Following Material From Je, Store To Site Of Work Including Loading & Unloading At Both Ends Maximum Distance Up To 40 Km. :- 2 Pcc Pole 8.5 Mtr Long 3 Stp Pole 11 Mtr. Long. 4 Line Material Such As 11 Kv Cross Arms 11 Kv Pin, 11 Kv Pin Insulator, 11 Kv Disc, Stay Rod, Stay Wire Acsr Weasel Conductor, Gi Wire, Ms Angle Iron & Ms Channel, Tpmo, Fuse Set Etc. 5 Cartage Of 25 Kva T / F From Store Center Meerut To Site Including And Unloading Of T / F 6 Cartage Of 63 Kva T / F From Store Center Meerut To Site Including And Unloading Of T / F 7 Cartage Of 100 Kva T / F From Store Center Meerut To Site Including And Unloading Of T / F 8 Erection Of Pcc Pole 8.5 Mtr Long / Stp Pole 11 Mtr Long After Digging Of Soil And Make A Pit Of Size 1.6X1.2X0.6 Mtr Deep Each Pole Including Grouting Of Pole Having ( Ratio 1:4:8 ) & Back Filling Of Soil And Proper Ramming After Completion Of Work. 9 Fabrication And Fixing Of All 11 Kv Ht / Lt Line Accessories. 10 Erection Of Double Pole On Pcc Pole 8.5 Mtr After Digging Of Soil And Make A Pit Of Size 1.6X1.2X0.6 Mtr Deep Each Pole Including Grouting Of Pole Having ( Ratio 1:4:8 ) & Back Filling Of Soil And Proper Ramming After Completion Of Work. 11 Fabrication And Fixing Of Ms Angle And Ms Channel, Fixing All 11 Kv Accessories Tpmo, Fuse Set 11 Kv Pin Insulators On D / P Pole. 12 Mounting Of 25 / 63 / 100 Kva T / F With Proper Jumpering Of Ht Side And Fixing Of Cable On Lt Side Of T / F. 13 Erection Of Stay Rod Complete After Digging A Pit Of Size 1.6 Mtr Deep And Grouting The Same In Block Of Size 0.60 X 0.60 X 0.30 Mtr And Nuzzling At The Both Ends And Filling The Pit With Excavated Earth Soil With Proper Ramming. 14 Laying Lifting Stringing & Proper Sagging Of Acsr Weasel Conductor For 3 Phase, 3 Wire 11 Kv Line Including Binding & Jumpering Properly. 15 Laying Of Acsr Weasel Cable Of Various Size Including Fixing Of All Acsr Weasel On Support 16 Laying Of Xlpe Ab Cable Of Various Size Including Fixing Oflt Accessories On Support 17 Fixing Of Distribution Box Including Fixing The Cable From Transformar And Consumer Service Cable 18 Earthing Of Each 11 Kv Line Pole & T / F Properly After Drive Of Electrodes If Size 20Mm X 250 Mm And Connection The Earthing Point With Gi Wire. 19 Guarding Of Line With G.I Wire Having 2 No. Horizontal Wire & 3 Mtr Distance Of Swg G.I Wire After Fabrication Of Guard Cross Arms Of & Fixing The Same In Supports. 20 Providing & Fixing Ms Nut Bolt, J Hook, Holding Clamp, Danger Board, Dead End Clamp, Percing Clamp, Box Clamp 21 Cutting & Chopping Tree Branches Near Side Of Line For Making The Clearance Between Line And Tree.

INR 1180 /-

INR 2000.0 /-

INR 2 Lakhs /-

Name of Work: COMPLETION OF WORKS UNDER FULL DEPOSIT (JHATPAT PORTAL, NIVESH MITRA AND LINE SHIFTING WORKS UNDER FULL DEPOSIT SCHEME) IN THE AREA OF EDSD-II, KITHORE UNDER EDD-IV, MEERUT.

Sl. No.	Item Description
1	Carriage of following material from JE, Store to site of work including loading & unloading at both ends maximum distance up to 40 Km. :-
2	PCC Pole 8.5 Mtr Long
3	STP Pole 11 Mtr. Long.
4	Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel, TPMO, Fuse set etc.
5	Cartage of 25 KVA T/F From Store Center Meerut to Site Including And unloading of T/F
6	Cartage of 63 KVA T/F From Store Center Meerut to Site Including And unloading of T/F
7	Cartage of 100 KVA T/F From Store Center Meerut to Site Including And unloading of T/F
8	Erection of PCC pole 8.5 Mtr long/STP Pole 11 mtr long after digging of soil and make a pit of size 1.6x1.2x0.6 mtr deep each pole including grouting of pole having (ratio 1:4:8) & back filling of soil and proper ramming after completion of work.
9	Fabrication and fixing of all 11 KV HT/LT line accessories.
10	Erection of Double pole on PCC pole 8.5 mtr after digging of soil and make a pit of size 1.6x1.2x0.6 mtr deep each pole including grouting of pole having (ratio 1:4:8) & back filling of soil and proper ramming after completion of work.
11	Fabrication and fixing of MS angle and MS channel, fixing all 11 KV accessories TPMO, Fuse set 11 KV pin insulators on D/P Pole.
12	Mounting of 25/63/100 KVA T/F with proper jumpering of HT side and fixing of cable on LT side of T/F.
13	Erection of stay rod complete after digging a pit of size 1.6 mtr deep and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.
14	Laying lifting stringing & proper sagging of ACSR weasel conductor for 3 phase, 3 wire 11 KV line including binding & jumpering properly.
15	Laying of ACSR Weasel Cable of various size including fixing of all ACSR Weasel on support
16	Laying of XLPE AB Cable of various size including fixing ofLT accessories on support
17	Fixing of Distribution box including fixing the cable from transformar and consumer service cable
18	Earthing of each 11 KV line pole & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GI wire.
19	Guarding of Line with G.I wire having 2 no. horizontal wire & 3 mtr distance of SWG G.I wire after fabrication of guard cross arms of & fixing the same in supports.
20	Providing & fixing MS Nut Bolt, J Hook, Holding Clamp, Danger Board, Dead End Clamp, Percing Clamp, Box Clamp
21	Cutting & chopping tree branches near side of line for making the clearance between line and tree.